Determination of Total Flavonoids in Acanthopanax senticosus(Rupr. et Maxim.) Harms by Enzymolysis and Its Technological Optimization

In order to optimize the ultrasonic extraction technique for the total flavonoid of leaf yellows plus, the contents of 21 leaf yellows plus total flavonoid from four regions in Heilongjiang Province were comparatively analyzed. The ultrasonic extraction technology was optimized by Box-Behnken response surface method, and the total flavonoid content of 21 kinds of Acanthopanax senticosus(Rupr. et Maxim.) Harms from different producing areas were analyzed by cluster analysis. The optimal process conditions were determined as ultrasonic time 30 min, solid-liquid ratio 1 : 12 and ultrasonic power 250 W, and the average yield of the total flavonoid was 1.453 mg·g^ (-1). By optimizing the ultrasonic-assisted extraction method, the total flavonoid content from different producing areas was compared in the experiment, which provided certain data support for the optimization of the extraction process in the future and laid a certain theoretical foundation for the quality analysis of Chinese medicinal materials.

Large Aperture Mirror Surface Test

The large aperture mirror surface test is the basis of optical processing and alignment, and is also the key to the development of remote sensing device. The simulation results show that the RMS values of 1.07 m primary mirror with multi-point support and sling support are 1.86 nm and 3.28 nm respectively. Using 36 point unloading device, sponge 36 point free support and sling support to test the mirror surface, the results are basically consistent, RMS is better than 0.02λ (λ = 632.8 nm).

Surface wave transducer for ultrasonic nondestructive testing of polymer components

In the point of application to ultrasonic nondestructive testing of surface stress and defect in polymer component, the oblique suxface wave transducer is investigated on its acoustic property and especially the mechanism of acoustic attenuation of acoustic entrant material inside the transducer. A new kind of room temperature vulcanized silicone elastomer as wedge material, in which ultrasound can propagate in very low speed with weak attenuation, is developed through a great deal of trials. The corresponding ultrasonic transducer is also designed for further researches and application to detect surface stress and surface crack in aerospace transparent component.

Tribological Properties of a Dendrite-reinforced Ti-based Metallic Glass Matrix Composite under Different Conditions

The tribological properties of the in-situ dendrite-reinforced metallic glass matrix composite（Ti42Zr22V14-Cu5Be17）prepared by copper mould casting were analyzed at different normal loads under the dry condition and rainwater.The results showed that the average value of the frictional coefficients and micro-hardness ascended with increasing the normal load,while the wear rate showed a trend of decline under the dry condition.The electrochemical test results showed that the surface of samples was pitting corroded in the rainwater.The matrices were corroded first.Then the dendrites were exposed,leading to the damage of the surface.Both the frictional coefficients and wear rate of the composite in the rainwater were larger than those under the dry condition,primarily owing to the corrosion of chloride ions on the worn surface.The wear mechanisms of composites were mainly adhesive wear,accompanied by the abrasive wear under the dry condition and corrosive wear in the rainwater.The composites have higher wear resistance both under the dry condition and rainwater due to the lower wear rate.

A new visual investigation into nanogold-based genechip assay by atomic force and scanning tunneling microscope

Conformations of surface atoms in various stages of nanogold-based genechip testing are scanned by the atomic force and scanning tunneling microscope. We intuitively observe the process and differences in probe combination, nucleic acid hybridization, and silver staining, which might be useful to validate the assay method of genechip. We hope to use this technology to make the other invisible chemical or biochemical reaction become visible and convincible in the future.

Study on positive-negative pressure seed metering device for wide-seedling-strip-seeding

In order to solve the problem of poor uniformity of wheat strip sowing,this paper designs a positive-negative pressure wheat wide-seedling-strip-seeding precision seed metering device,which adopts the roller structure with the principle of combined positive-negative pressure.Through theoretical analysis and relevant data,the structure of the seed metering device and the structure of the positive-negative pressure air chamber were designed.The internal flow field conditions were simulated by Fluent software under different structural parameters.The design of the seed holes was completed by analyzing the pressure cloud diagram and the flow velocity vector diagram,and the optimal combination of parameters was obtained and the influence law of negative pressure on the flow field was obtained.The effect of rotational speed on the flow field was studied by EDEM-Fluent coupling technique.In this paper,a three-factor and three-level response surface test was conducted on a JPS-12 test bench with Liangxin-99 wheat as the research object.The experiment was conducted with the rotational speed of seed metering device,the negative pressure of seed suction and the seeding height as factors,and the qualified index,the reseeding index and the miss-seeding index as evaluation indicators.Through the test,the optimal structure and working parameters of the seed metering device were determined as follows:the diameter of the seed hole was 2 mm,and the number of seed holes per row was 28,negative pressure was−3.5 kPa,rotational speed of seed metering device was 19 r/min,and seeding height was 180 mm.Validation test was carried out on the optimized seed metering device:the qualified index was 80.62%,the reseeding index was 9.22%,and the miss-seeding index was 10.16%,which reached the parameter indicator in JB/T 10293-2013 Technical conditions of single seed(precision)seeder and met the agronomic requirements for wheat wide-seedling-strip-seeding.

Towards automated validation of charted soundings:Existing tests and limitations

The nautical chart is one of the fundamental tools in navigation used by mariners to plan and safely execute voyages.Its compilation follows strict cartographic constraints with the most prominent being that of the safety.Thereby,the cartographer is called to make the selection of the bathymetric information for portrayal on charts in a way that,at any location,the expected water depth is not deeper than the source information.To validate the shoal-biased pattern of selection two standard tests are used,i.e.the triangle and edge tests.To date,some efforts have been made towards the automation of the triangle test,but the edge test has been largely ignored.In the context of research on a fully automated solution for the compilation of charts at different scales from the source information,this paper presents an algorithmic implementation of the two tests for the validation of selected soundings.Through a case study with real-world data,it presents the improved performance of the implementation near and within depth curves and coastlines and points out the importance of the edge test in the validation process.It also presents the,by definition,intrinsic limitation of the two tests as part of a fully automated solution and discusses the need for a new test that will complement or supersede the existing ones.