The Cyclonic-Static Microbubble Flotation Column (FCSMC) is currently a widely used, novel type of flotation device. The self-absorbing microbubble generator is the core component of this device. The structure of the ...The Cyclonic-Static Microbubble Flotation Column (FCSMC) is currently a widely used, novel type of flotation device. The self-absorbing microbubble generator is the core component of this device. The structure of the microbubble generator directly influences flotation column performance by affecting bubble size and distribution as well as gas holdup in the column. However, the complicated flow inside the generator results in high R&D costs and difficulty in testing. Thus, the CFD software, FLUENT, was used to simulate the gas-liquid two-phase flow inside a self-absorbing microbubble generator. The effect of area ratio, a key structural parameter, was studied in detail. Critical flow-field parameters including velocity, turbulent kinetic energy, minimum static pressure and gas holdup were obtained. The simulation results demonstrate that the optimum area ratio is 3.展开更多
In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scannin...In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scanning electron microscope-energy dispersive system (SEM-EDS) and an X-ray spectrometer the mineral category and content of samples were analyzed. By using a mineral liberation analyzer (MLA) the mineral liberation characteristics were revealed. It is shown that in roughing feed the monomers liberation degree of nickel pyrite and chalcopyrite take up 84.11% and 88.82%, respectively. In tailings, the lost nickel pyrite and chalcopyrite are mainly monomers. Therefore, strengthening the micro-fine particle recovery capacity is the key to increase recovery.展开更多
The cyclonic-static microbubble flotation column has dual effects including the cyclonic separation and floatation separation with the characteristics of the small lower limit of the effective separation size, short s...The cyclonic-static microbubble flotation column has dual effects including the cyclonic separation and floatation separation with the characteristics of the small lower limit of the effective separation size, short separation time, large handling capacity, and low operation cost. It shows significant advantages in the oily wastewater treatment field, especially the polymer flooding oily wastewater treatment aspect. In this paper, the cyclonic separation function mechanism of the cyclonic-static microbubble flotation column was studied, the impact of the parameters including the feeding rate, aeration rate, circulating pressure, and underflow split ratio on the cyclonic separation efficiency was investigated, and the cyclonic separation efficiency model was established as well. In addition, by applying the Doppler Laser Velocimeter (LDV) and Fluent simulation software, the test and simulation to the single-phase flow velocity field of the cyclonic separation section of the cyclonic-static microbubble flotation column were carried out, and the velocity distribution rule of the cyclonic separation section was analyzed under the singlephase flow conditions.展开更多
Physical upgrading of graphite is typically achieved with many stages of grinding and flotation to produce a concentrate with approximately 95% carbon grade.An innovative grinding and column flotation process has been...Physical upgrading of graphite is typically achieved with many stages of grinding and flotation to produce a concentrate with approximately 95% carbon grade.An innovative grinding and column flotation process has been developed for efficient graphite upgrading to substantially simplify the process flowsheet and reduce operating costs.In this process,a high-pressure grinding roller(HPGR) and a stirred mill were employed as primary comminution techniques and a nanobubble flotation column as a key separation process.The results obtained with a crystalline flake graphite sample with a carbon grade of 11.15% show that the novel process can produce a concentrate with 94.82% carbon grade and 97.89% recovery from an open circuit of one rougher and two cleaner flotation stages.Scanning electron microscope(SEM)microphotographs indicate that HPGR offers the advantage of more effective protection of graphite flakes during crushing.Grinding test results show that stirred mill could not only protect graphite flakes but also promote the efficient liberation of graphite.Compared with the traditional flotation process,nanobubble flotation can effectively recover ultrafine graphite.The new process possesses a number of important advantages over the traditional method,including substantially higher graphite recovery,greatly simplified process flowsheet,better protection of flake size,reduced reagent consumption and process costs,etc.展开更多
基金Financial supports for this work provided by the National High Technology Research and Development Program of China (No.2008BAB31B02) is gratefully acknowledged
文摘The Cyclonic-Static Microbubble Flotation Column (FCSMC) is currently a widely used, novel type of flotation device. The self-absorbing microbubble generator is the core component of this device. The structure of the microbubble generator directly influences flotation column performance by affecting bubble size and distribution as well as gas holdup in the column. However, the complicated flow inside the generator results in high R&D costs and difficulty in testing. Thus, the CFD software, FLUENT, was used to simulate the gas-liquid two-phase flow inside a self-absorbing microbubble generator. The effect of area ratio, a key structural parameter, was studied in detail. Critical flow-field parameters including velocity, turbulent kinetic energy, minimum static pressure and gas holdup were obtained. The simulation results demonstrate that the optimum area ratio is 3.
基金Projects 2008BAB31B01 supported by the National Key Technology R&D Program in the 11th Five-Year Plan of China50834006 by the National Natural Science Foundation of China
文摘In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scanning electron microscope-energy dispersive system (SEM-EDS) and an X-ray spectrometer the mineral category and content of samples were analyzed. By using a mineral liberation analyzer (MLA) the mineral liberation characteristics were revealed. It is shown that in roughing feed the monomers liberation degree of nickel pyrite and chalcopyrite take up 84.11% and 88.82%, respectively. In tailings, the lost nickel pyrite and chalcopyrite are mainly monomers. Therefore, strengthening the micro-fine particle recovery capacity is the key to increase recovery.
基金the National Natural Science Foundation of China (No. 50974119) for the financial support for this project
文摘The cyclonic-static microbubble flotation column has dual effects including the cyclonic separation and floatation separation with the characteristics of the small lower limit of the effective separation size, short separation time, large handling capacity, and low operation cost. It shows significant advantages in the oily wastewater treatment field, especially the polymer flooding oily wastewater treatment aspect. In this paper, the cyclonic separation function mechanism of the cyclonic-static microbubble flotation column was studied, the impact of the parameters including the feeding rate, aeration rate, circulating pressure, and underflow split ratio on the cyclonic separation efficiency was investigated, and the cyclonic separation efficiency model was established as well. In addition, by applying the Doppler Laser Velocimeter (LDV) and Fluent simulation software, the test and simulation to the single-phase flow velocity field of the cyclonic separation section of the cyclonic-static microbubble flotation column were carried out, and the velocity distribution rule of the cyclonic separation section was analyzed under the singlephase flow conditions.
基金supported by the Fundamental Research Funds for the Central Universities (No. 2019XKQYMS45)。
文摘Physical upgrading of graphite is typically achieved with many stages of grinding and flotation to produce a concentrate with approximately 95% carbon grade.An innovative grinding and column flotation process has been developed for efficient graphite upgrading to substantially simplify the process flowsheet and reduce operating costs.In this process,a high-pressure grinding roller(HPGR) and a stirred mill were employed as primary comminution techniques and a nanobubble flotation column as a key separation process.The results obtained with a crystalline flake graphite sample with a carbon grade of 11.15% show that the novel process can produce a concentrate with 94.82% carbon grade and 97.89% recovery from an open circuit of one rougher and two cleaner flotation stages.Scanning electron microscope(SEM)microphotographs indicate that HPGR offers the advantage of more effective protection of graphite flakes during crushing.Grinding test results show that stirred mill could not only protect graphite flakes but also promote the efficient liberation of graphite.Compared with the traditional flotation process,nanobubble flotation can effectively recover ultrafine graphite.The new process possesses a number of important advantages over the traditional method,including substantially higher graphite recovery,greatly simplified process flowsheet,better protection of flake size,reduced reagent consumption and process costs,etc.
