The Study on Protection and Construction Mode of Urban Ecologically Sensitive Areas

The paper had analyzed the necessity and feasibility for the protection and utilization of urban ecologically sensitive areas, proposed planning urban ecologically sensitive areas reasonably and combining ecological protection with development construction. Guiding the healthy and ordered development of urban spaces was the key part and important approach to realize ecological cities. The guiding thought for development construction of ecological cities had been discussed, which was conducting laddered development according to the location and coverage of urban ecologically sensitive areas and protection grades of these sensitive areas. Then, it had proposed four kinds of protection and construction modes, which were tourism leisure green lands, relevant expositions, industrial areas and new city groups, and which had been analyzed by combining with successful cases, so as to provide feasible win-win development strategies of ecology and economy for the planning of urban ecologically sensitive areas in the future.

Comparison the Performances of Three Earthing Systems for Micro-Grid Protection during the Grid Connected Mode

This paper presents, tests and compares three earthing systems (TT, TN and IT) for Micro-Grid (MG) protection against various fault types during the connected mode. The main contribution of this work is including the models of all the micro sources which interfaced to the MG by power electronic inverters. Inverters in turns are provided with current limiters and this also included in the inverter models to exactly simulate the real situation in the MG during fault times. Results proved that the most suitable earthing system for MG protection during the connecting mode is the TN earthing system. That system leads to a suitable amount of fault current sufficient to activate over current protection relays. With using TN system, Touch voltages at the faulted bus and all other consumer’s buses are less than the safety limited value if current limiter is included with the transformer of the main grid which connects MG. For the two others earthing systems (TT and IT), fault current is small and nearly equal to the over load current which make over current protection relay can not differentiate between fault current and overload current. All models of micro sources, earthing systems, inverters, main grid and control schemes are built using Matlab?/Simulink? environment.

K-Modes聚类数据收集和发布过程中的混洗差分隐私保护方法

针对目前聚类数据收集与发布安全性不足的问题,为保护聚类数据中的用户隐私并提高数据质量,基于混洗差分隐私模型,提出一种去可信第三方的K-Modes聚类数据收集和发布的隐私保护方法。首先,使用K-Modes聚类数据收集算法对用户数据进行采样并加噪,再通过填补取值域随机排列发布算法打乱采样数据的初始顺序,使恶意攻击者不能根据用户与数据之间的关系识别出目标用户。然后,尽可能减小噪声的干扰,利用循环迭代的方式计算出新的质心完成聚类。最后,从理论层面上分析了以上3种方法的隐私性、可行性和复杂度,并利用3个真实数据集和近年来具有权威性的同类算法KM、DPLM、LDPKM等进行准确率、熵值的对比,验证所提方法的有效性。实验结果表明,所提方法的隐私保护和发布数据质量均优于当前同类算法。

Modes for Agricultural Land Protection in China

The main problem of agricultural land protection in China is the single farmland protection mode insuring arable land area only by issuing indicators,which brings great pressure to farmland's production and service function. Through establishing the corresponding relationship between food structure and some land use types,this paper points out that there is asymmetry between farmland area and per capita food consumption structure in China in recent years. Based on the above study,the paper proposes four types for agricultural land production, namely subsistence,fairly well-off,ecological and discrete type. Finally,it concludes that establishing rational type for agricultural land protection and implementing diverse farmland protection modes is the trend of farmland protection in China in the future.

Landscape Protection Mode of Traditional Villages in Ningbo

The protection of traditional village landscape is of great significance for inheriting traditional culture and keeping nostalgia.Taking the traditional villages in Ningbo as the research object,the mode of landscape protection of traditional villages based on the perspective of regional landscape was discussed.This study not only paid attention to the protection of material landscape,but also emphasized the protection of cultural belief and custom landscape,and transformed the intangible cultural belief and custom heritage into material landscape and it not only paid attention to the landscape protection with clear space mechanism of the clan courtyard,but also innovated the landscape space protection with relatively fuzzy space mechanism of the clan courtyard,and adopted different protection methods according to the clarity degree of the courtyard mechanism.In view of the village market space landscape,not only the single dependent architectural landscape protection was considered,but also the linear space landscape protection was emphasized.The idea and method of protection put forward show the historical existence of the value of ancient villages and better reflect the contemporary significance of "remembering nostalgia".

基于k-modes聚类算法的混洗差分隐私方法

首次提出一种基于k-modes聚类算法的混洗差分隐私保护方案(简称SDPk-modes).SDPk-modes根据每个数据之间的距离划分为不同的组,得到足够的细粒度优化效用,采用基于梯度随机扰动技术使计算最优概率耗时更短;在k-modes聚类过程中,通过将数据中频繁出现的特征向量作为聚类中心点,基于属性熵的距离度量方法,加快算法收敛至聚类中心的速度,解决原始算法聚类速度慢、易陷入局部最优等问题,显著提高聚类的效果.实验验证表明,本文提出的方案优于当前同类方案.

The Research on Protection of Historical and Cultural Towns and Villages in China

After the discussion of the protection process and significance for historical and cultural towns and villages and the introduction of survey and theoretical researches on them,five modes had been divided for the protection of historical and cultural towns and villages in China,which were original appearance protection,renovated utilization protection,removal protection,antique imitation development and real estate development.It had pointed out problems existing in historical and cultural villages' protection,which were that policies and regulations were incomplete and protective measures were laggard;leaders decided blindly and neglected experts' opinions;immediate interest had been highlighted and sustainable development been overlooked,capitals were lacked and management was disordered,and the publicity was insufficient and the masses had no high protection consciousness.On this basis,it had discussed the protection of historical and cultural towns and villages in the future,emphasized the completion of regulatory system and management mechanism,enhance capital investment and publicity education,and deeply explore material cultural heritages and non-material cultural heritages in historical and cultural villages,finally further studying the theories and cases.

Mode switching torque distribution strategy of timely four-wheel driven high-gap plant protection machine

The high-gap plant protection machine is taken in this paper as the research object to ensure the good driving power and safety of the high-gap plant protection machine,and the control strategy of inter-shaft torque distribution is established under different working conditions to improve vehicle power and lateral stability.The anticipated demand torque is initially determined based on the structural characteristics and operational principles of the plant protection machine.Subsequently,a hierarchical control framework is devised by incorporating a formulated switching control strategy.Finally,a simulation model for torque distribution control strategy between shafts is developed on the Matlab/Simulink platform,followed by simulation and experimental verification.The results are presented as follows:the inter-shaft torque distribution strategy established in this paper increases the average longitudinal acceleration by 0.13 m/s^(2) and 0.14 m/s^(2) under the control of low and high to low adhesion road surfaces,respectively.Under the control of the single-line shifting condition,the yaw velocity can successfully follow the expected value with a maximum value of 0.61 rad/s.The side deflection angle of the center of mass does not exceed 2.8°,which can follow the ideal trajectory and improve power and safety.

The geological heritages in Xinjiang, China： Its features and protection

The geological heritage protection and its development at home and abroad reflect the progress in the aspect from the single protection to the coordination between protection and exploitation. The geopark established by UNESCO has closely combined the protection of geological heritages with the promotion of sustainable development of local economy, which has become the best way to protect geological heritages. The geological heritages in Xinjiang, China, are characterized by their large quantity, rich variety and high grade. The complicated geologic-geomorphic environment in Xinjiang contributes to the creation of various geological heritage types and their spatial distribution, and at the same time makes them under control. The main types of the geological heritages in Xinjiang are the geologic-geomorphic landscapes and the water landscapes. The spatial distribution can be divided into five geological heritage districts： Altay, Junggar, Tianshan, Tarim and Kunlun-Altun, among which Tianshan and Kunlun-Altun are most important. Based on the first systematic investigation of the geological heritages in Xinjiang, it is confirmed that the insufficient coordination between protection and exploitation is the primary cause for the backward situation in the geological heritage protection. To solve the problem, this paper proposes 6 major protection steps--from determining the protection types, the protection forms, the protection modes, the protection grades, the protection sequences to determining the＇ protection zones, brings forward the idea of optimal-selection which integrates geoparks with geological heritage protection areas and other protection areas as protection and exploitation reserve list for 209 well as 5 corresponding modes, and makes a important geological heritages in Xinjiang.

Design and testing of a centralized protection scheme for micro-grids

Micro-grids comprise low voltage distribution systems with distributed energy resources(DERs) and controllable loads which can operate connected to the medium voltage grid or islanded in a controlled coordinated way. This concept aims to move from "connect and forget" philosophy towards a full integration of DERs. Micro-grids can provide numerous economic and environmental benefits for end-customers, utilities and society. However, their implementation poses great technical challenges, such as a new philosophy in design of protection systems. In this work, a micro-grid protection scheme is presented based on positive-sequence component using phasor measurement units(PMUs) and a central protection unit(CPU). The salient feature of the proposed scheme in comparison with the previous works is that it has the ability to protect both radial and looped micro-grids against different types of faults with the capability of single-phase tripping. Furthermore, since the CPU is capable of updating its pickup values(upstream and downstream equivalent positive-sequence impedances of each line) after the first change in the micro-grid configuration(such as transferring from grid-connected to islanded mode and or disconnection of a line, bus, or DER either in grid-connected mode or in islanded mode), it can protect micro-grid against subsequent faults. Finally, in order to verify the effectiveness of the suggested scheme and the CPU, several simulations have been undertaken by using DIg SILENT Power Factory and MATLAB software packages.

A Space Vector Modulation Based Three-level PWM Rectifier under Simple Sliding Mode Control Strategy

In this paper, a voltage oriented control strategy for three-level PWM rectifier based on Sliding Mode Control (SMC) is introduced in order to obtain fast and accurate response of dc-bus voltage. To verify the validity of the analysis and the feasibility of the proposed control method a set of simulation tests have been conducted using Matlab/Simulink. The simulation results show that compared to the conventional PI controller, the SMC can reduce drastically the three-level rectifier’s voltage fluctuation and improve the dynamic response of dc-bus significantly.

Model predictive current control for PMSM driven by three-level inverter based on fractional sliding mode speed observer

Based on the fractional order theory and sliding mode control theory,a model prediction current control(MPCC)strategy based on fractional observer is proposed for the permanent magnet synchronous motor(PMSM)driven by three-level inverter.Compared with the traditional sliding mode speed observer,the observer is very simple and eases to implement.Moreover,the observer reduces the ripple of the motor speed in high frequency range in an efficient way.To reduce the stator current ripple and improve the control performance of the torque and speed,the MPCC strategy is put forward,which can make PMSM MPCC system have better control performance,stronger robustness and good dynamic performance.The simulation results validate the feasibility and effectiveness of the proposed scheme.

基于K-modes聚类算法的安徽历史文化名村分类及保护发展策略

以安徽省44个省级以上历史文化名村为研究对象,分析其空间分布特征与保护管理现状,并探讨影响其类型划分的具体因素。同时,借鉴学者关于历史文化名村和传统村落分类的研究,以地理条件、产业经济、社会生活、历史文化为主要维度,构建形成安徽历史文化名村类型划分的指标体系。基于此,运用K-modes聚类算法,将安徽历史文化名村划分为生态宜居型、文旅资源型、特色民俗型、综合发展型四种类型,并总结各类历史文化名村的典型特征,进而提出相应的保护与发展策略。

Current Situation and Protection Means of Traditional Chinese Garden

Traditional garden is a vital element of traditional cultural heritage in China, and it is a common concern of the public to protect, inherit and develop traditional cultural heritage. This paper, on the basis of investigating current protection of royal gardens, private gardens in southern regions of the Yangtze River, and gardens in different regions, summarized 4 fundamental modes of traditional garden protection, namely protective development mode, developmental protection mode, controlled protection mode, no-protection mode. Advantages and disadvantages of different modes were reviewed, protective development was proposed as a traditional garden protection mode adaptive to actual conditions of China.

Sliding mode control of solid state transformer using a three-level hysteresis function

The solid state transformer(SST) can be viewed as an energy router in energy internet. This work presents sliding mode control(SMC) to improve dynamic state and steady state performance of a three-stage(rectifier stage, isolated stage and inverter stage) SST for energy internet. SMC with three-level hysteresis sliding functions is presented to control the input current of rectifier stage and output voltage of inverter stage to improve the robustness under external disturbance and parametric uncertainties and reduce the switching frequency. A modified feedback linearization technique using isolated stage simplified model is presented to achieve satisfactory regulation of output voltage of the isolated stage. The system is tested for steady state operation, reactive power control, dynamic load change and voltage sag simulations, respectively. The switching model of SST is implemented in Matlab/ Simulink to verify the SST control algorithms.

A Protection Method of VSC-HVDC Cables Based on Generalized S-Transform

Generalized S-transform is a time-frequency analysis method which has higher resolution than S-transform. It can precisely extract the time-amplitude characteristics of different frequency components in the signal. In this paper, a novel protection method for VSC-HVDC (Voltage source converter based high voltage DC) based on Generalized S-transform is proposed. Firstly, extracting frequency component of fault current by Generalized S-transform and using mutation point of high frequency to determine the fault time. Secondly, using the zero-frequency component of fault current to eliminate disturbances. Finally, the polarity of sudden change currents in the two terminals is employed to discriminate the internal and external faults. Simulations in PSCAD/EMTDC and MATLAB show that the proposed method can distinguish faults accurately and effectively.

A Comparison Study of Input ESD Protection Schemes Utilizing NMOS, Thyristor, and Diode Devices

For three fundamental input-protection schemes suitable for high-frequency CMOS ICs, which utilize protection devices such as NMOS transistors, thyristors, and diodes, we attempt an in-depth comparison on HBM ESD robustness in terms of lattice heating inside protection devices and peak voltages developed across gate oxides in input buffers, based on DC, mixed-mode transient, and AC analyses utilizing a 2-dimensional device simulator. For this purpose, we construct an equivalent circuit model of input HBM test environments for CMOS chips equipped with input ESD protection circuits, which allows mixed-mode transient simulations for various HBM test modes. By executing mixed-mode simulations including up to six active protection devices in a circuit, we attempt a detailed analysis on the problems, which can occur in real tests. In the procedure, we suggest to a recipe to ease the bipolar trigger in the protection devices and figure out that oxide failure in internal circuits is determined by the peak voltage developed in the later stage of discharge, which corresponds to the junction breakdown voltage of the NMOS structure residing in the protection devices. We explain strength and weakness of each protection scheme as an input ESD protection circuit for high-frequency ICs, and suggest valuable guidelines relating design of the protection devices and circuits.

Three-level inverter configuration with common mode voltage elimination for induction motor drive (To continue)

The multiplicity of vector combinations for vectors of combined three-level inverters plays an important role, when deciding on the modulation scheme, to obtain minimum switching per inverter vector change, as described in the next Section. This is not possible with reduced common-mode three-level inverter structure, obtained with a five-level cascaded H-bridge configuration, as the space vectors locations do not exhibit multiplicity. Moreover, the proposed configuration requires only two power supplies, whereas the scheme with the five-level H-bridge configuration requires six isolated power supplies.

Three-level inverter configuration with common mode voltage elimination for induction motor drive

The multiplicity of vector combinations for vectors of combined three-level inverters plays an important role, when deciding on the modulation scheme, to obtain minimum switching per inverter vector change, as described in the next Section. This is not possible with reduced common-mode three-level inverter structure, obtained with a five-level cascaded H-bridge configuration, as the space vectors locations do not exhibit multiplicity. Moreover, the proposed configuration requires only two power supplies, whereas the scheme with the five-level H-bridge configuration requires six isolated power supplies.

A Thyristor-Only Input ESD Protection Scheme for CMOS RF ICs

We propose an input protection scheme composed of thyristor devices only without using a clamp NMOS device in order to minimize the area consumed by a pad structure in CMOS RF ICs. For this purpose, we suggest low-voltage triggering thyristor protection device structures assuming usage of standard CMOS processes, and attempt an in-depth comparison study with a conventional thyristor protection scheme incorporating a clamp NMOS device. The comparison study mainly focuses on robustness against the HBM ESD in terms of peak voltages applied to gate oxides in an input buffer and lattice heating inside protection devices based on DC and mixed-mode transient analyses utilizing a 2-dimensional device simulator. We constructed an equivalent circuit for the input HBM test environment of the CMOS chip equipped with the input ESD protection devices. And by executing mixed-mode simulations including up to four protection devices and analyzing the results for five different test modes, we attempt a detailed analysis on the problems which can occur in real HBM tests. We figure out strength of the proposed thyristor-only protection scheme, and suggest guidelines relating the design of the protection devices and circuits.