Construction of Anti-breaking Models of the Main Veins of Flue-cured Tobacco Leaves and Principal Component Analysis

[Objective] This study aimed to explore the related mechanisms of the breaking of flue-cured tobacco leaves. [Method] Anti-breaking models of the main veins of flue-cured tobacco leaves were constructed for principal component analysis on the anti-breaking index, leaf traits and cellulose contents. [Result] The results showed that the growth traits had certain relevance with the cellulose contents while the leaf weight assumed a significant negative correlation with the anti-breaking index, indicating that the heavier the leaf weight was, the weaker the anti-breaking capacity of flue-cured tobacco would be; the cross-sectional area of main veins and the cellulose contents had shown a positive correlation with the anti-breaking index, indicating that the thicker the main vein of flue-cured tobacco was, the higher the cellulose contents would be, and the stronger the anti-breaking capacity of flue-cured tobacco leaves would be. [Conclusion] This study provided theoretical basis and reference to improve tobacco production and enhance the quality of flue-cured tobacco.

Genetic Diversity Analysis of the Main Commercial Varieties of Brassica napus in Guizhou Province

[Objective] The aim was to investigate the genetic diversity of the main commercial varieties of Brassica napus in Guizhou Province at the molecular level. [Method] Nine main commercial rapeseed cultivars in Guizhou were detected by 40 pairs of SSR primers used in the national regional trial of B. napus, and then clus-tering analysis was carried out. [Result] A total of 191 bands were amplified, and 143 （accounting for 75%） of them showed polymorphism among the nine rapeseed cultivars. By cluster analysis, the nine cultivars were divided into two groups. Group A included seven varieties, and group B consisted of two cultivars from Guizhou In-stitute of Oil Crops. The cultivars in group A were further divided into sub-groups A1 and A2 at the similarity coefficient of 0.643 4. Sub-group A1 included three culti-vars from Guizhou Rapeseed Institute, and sub-group A2 included the other four cultivars from Guizhou Institute of Oil Crops. [Conclusion] The cultivars bred by the same institute had similar genetic background. The cultivars from Guizhou Institute of Oil Crops showed wider genetic basis. However, the genetic similarity coefficient between Qianyou 17 and Qianyou 29 was up to 0.87, suggesting that they shared closer genetic basis.

STIFFNESS ANALYSIS OF THE MAIN MODULE FOR PARALLEL MACHINE TOOLS BY FINITE ELEMENT ANALYSIS

With the aid of commercial finite element analysis software package ANSYS,investigations are made on the contributions of main components to stiffness of the main module for parallel machine tools,and it is found that the frame is the main contributor.Then,influences of constraints,strut length and working ways of the main module have also been investigated.It can be concluded that when one of the main planes of the frame without linear drive unit is constrained,the largest whole stiffness can be acquired.And,the stiffness is much better when the main module is used in a vertical machine tool instead of a horizontal one.Finally,the principle of stiffness variation is summarized when the mobile platform reaches various positions within its working space and when various loads are applied.These achievements have provided critical instructions for the design of the main module for parallel machine tools.

Analysis on the Reason of Local Heavy Rainstorm Forecast Error in the Subtropical High Control

[Objective] The research aimed to study the reason of local heavy rainstorm forecast error in the subtropical high control. [Method] Started from summarizing the reason of forecast error, by using the conventional ground observation data, the upper air sounding data, T639, T213 and European Center (ECMWF) numerical prediction product data, GFS precipitation forecast product of U.S. National Center for Environmental Prediction, the weather situation, physical quantity field in a heavy rainstorm process which happened in the north of Shaoyang at night on August 5, 2010 were fully analyzed. Based on the numerical analysis forecast product data, the reason of heavy rainstorm forecast error in the subtropical high was comprehensively analyzed by using the comparison and analysis method of forecast and actual situation. [Result] The forecasters didn’t deeply and carefully analyze the weather situation. On the surface, 500 hPa was controlled by the subtropical high, but there was the weak shear line in 700 and 850 hPa. Moreover, they neglected the influences of weak cold air and easterlies wave. The subtropical high quickly weakened, and the system adjustment was too quick. The wind field variations in 850, 700 and 500 hPa which were forecasted by ECMWF had the big error with the actual situation. It was by east about 2 longitudes than the actual situation. In summer forecast, they only considered the intensity and position variations of 500 hPa subtropical high, and neglected the situation variations in the middle, low levels and on the ground. It was the most key element which caused the rainstorm forecast error in the subtropical high. The forecast error of numerical forecast products on the height field situation variation was big. The precipitation forecasts of Japan FSAS, U.S. National Center for Environmental Prediction GFS, T639 and T213 were all small. The humidity field forecast value of T639 was small. In the rainstorm forecast, the local rainstorm forecast index and method weren’t used in the forecast practice. In the precipitation forecast process, they only paid attention to the score prediction of station and didn’t value the non-site prediction. Some important physical quantity factors weren’t carefully studied. [Conclusion] The research provided the reference basis for the forecast and early warning of local heavy rainstorm.

Structural Stress Monitoring and FEM Analysis of the Cutting Operation of the Main Bracket of A Semi-Submersible Platform

For a semi-submersible platform in repair, the eight old main brackets which connect columns with pontoons need to be replaced by new ones. In order to ensure the safety of the cutting operation of the old main bracket and calculate the initial stress condition of new main bracket, the structural stress monitoring of eight key spots is carried out, and then the calibrated finite element model is established according to the field monitoring results. Before cutting the main bracket and all associated structures, eight rectangular rosettes were installed, and a tailored cutting scheme was proposed to release the initial stress, in which the main bracket and associated column and pontoon plates were partly cut. During the cutting procedure, the strains of the monitoring spots were measured, and then the structural stress of the monitored spots were obtained. The stress variation characteristics at different spots during the initial cutting operation were shown and the initial stress condition of the monitored spots was figured out. The loading and support conditions of the semi-submersible platform were calibrated based on the measured initial stress condition, which made the finite element model more credible. The stress condition with the main bracket and associated structures being entirely cut out is analyzed by the Finite Element Method (FEM), which demonstrates the cutting operation to be safe and feasible. In addition, the calibrated finite element model can be used to calculate the initial stress condition of the new main bracket, which will be very helpful for the long-term stress monitoring on the main bracket.

Analysis on the Influence of Spring Low Temperature on the Agriculture and the Formation Reason in Liaoning Province in 2010

[Objective] The research aimed to study the influence of spring low temperature on the agriculture and the formation reason in Liaoning Province in 2010. [Method] Based on the synoptics analysis principle, by analyzing the atmospheric circulation situation and satellite cloud map, the influence of spring low temperature on the agriculture and the formation reason of low temperature weather in Liaoning Province during April-May, 2010 were discussed. [Result] The high-altitude situation analysis showed that it was two-trough-two-ridge situation in the high latitude of Eurasia in April, 2010. Ural Mountains high-pressure ridge strengthened to move eastward. Lake Baikal cold air went down toward the southeast along the front of ridge and strengthened into the cold vortex. Liaoning was in the front of cold vortex. Affected by the cold vortex, the temperature in Liaoning area was low. In the first dekad of May, 2010, the activity of cold air was frequent. There were two times cold vortex influence, and the temperature was still low. In the later period of middle dekad of May, the warm ridge entered, and the temperature rose. The high-altitude trough and the low-level jet were the main system and the dynamic condition of precipitation generation respectively. The cold vortex was the main reason of spring continuous low temperature generation, and the secondary reason was the more precipitation. [Conclusion] The research provided the reference basis for the prevention and prediction of spring low temperature in Liaoning Province.

Analysis on Formation Reason of "0902" Blizzard in Northeast China

[Objective]The research aimed to analyze formation reason of ＂ 0902＂ blizzard in northeast China. [Method]By using timely observation data,NCEP reanalysis data and Doppler radar data at Baishan station,blizzard process in southeast part of northeast China during 12-13 February,2009 was analyzed. [Result]Snowfall zone of the blizzard process was wide,snowfall was more,snowfall gradient was big,and snowfall time relatively concentrated. These characteristics reflected that the blizzard process had significant convection characteristics. Baroclinic disturbance at high-altitude straight frontal zone and ground warm frontogenesis caused by eastward movement and northward advancement of North China low vortex at low altitude were the circulation characteristics in the process. Water vapor from the sea went northward as southwest airflow,and strongly converged in blizzard zone,which provided sufficient water vapor condition for the blizzard. Before heavy snowfall occurred,there was accumulation process of heat and energy. Conditional symmetric instability was main unstable mechanism of the blizzard. During heavy snowfall period,ascending branch of secondary vertical circulation at exit zone of high-altitude jet coupled with ascending branch of secondary vertical circulation of warm frontegenesis at low layer,inducing strong development of the vertical motion. Doppler radar intensity echo revealed that it was easy to generate blizzard in the area where echo intensity was consistently above 20 dBz. Strong wind velocity convergence zone at radical velocity field especially adverse wind zone was favorable for the generation of blizzard. [Conclusion]The research could provide reference for blizzard forecast in northeast China.

Collaborative Performance Analysis and the Establishement of Main Body of Agricutlural Technology Innovation

Relying on the relevant data from China Statistical Yearbook and Chinese Rural Statistical Yearbook,the coolabarative performance of main body of agricutlural technology innovation is evaluated by taking quaternary-parties innovation body as the sujects and by establishing the index system from the perspectives of input and output.The results show serious dislocation of main body and bad collabrative performance.On the basis,the quaternary-parties motivation system cocerning agricutlural enterpises,agricutlural science and technology acanamy,rural hosueholds and governments is established.The system is capable of integrating market,sciencetific reserch and diffusion collection into a whole part and solving the seperation of agricutlural innovation supply and demand.

Analysis of 1989/1990 main physical fields for air-sea coupled system in the tropical western Pacific

In this paper, the marine ship observation data sets in the seventh (October 16-December 4. 1989) and eighth (June 1-July 16, 1990) cruises of PRC -US tropical ocean and global atmosphere (TOGA) joint scientific investigation in the tropical western Pacific are used to analyze the elements such as sea surface temperature (SST), surface wind field, fluxes and net heat budget, which are important physical parameters of underlying earth's surface influencing the global mean circulation evolution on seasonal and interannual time scales. These diagnostic analyses are very beneficial to the understanding of the regional climate characteristics and the air-sea interaction mechanism, and the improving of surface flux parameterizations and regional or global climate model.

Towards Improving the Quality of Requirement and Testing Process in Agile Software Development:An Empirical Study

Software testing is a critical phase due to misconceptions about ambiguities in the requirements during specification,which affect the testing process.Therefore,it is difficult to identify all faults in software.As requirement changes continuously,it increases the irrelevancy and redundancy during testing.Due to these challenges;fault detection capability decreases and there arises a need to improve the testing process,which is based on changes in requirements specification.In this research,we have developed a model to resolve testing challenges through requirement prioritization and prediction in an agile-based environment.The research objective is to identify the most relevant and meaningful requirements through semantic analysis for correct change analysis.Then compute the similarity of requirements through case-based reasoning,which predicted the requirements for reuse and restricted to error-based requirements.Afterward,the apriori algorithm mapped out requirement frequency to select relevant test cases based on frequently reused or not reused test cases to increase the fault detection rate.Furthermore,the proposed model was evaluated by conducting experiments.The results showed that requirement redundancy and irrelevancy improved due to semantic analysis,which correctly predicted the requirements,increasing the fault detection rate and resulting in high user satisfaction.The predicted requirements are mapped into test cases,increasing the fault detection rate after changes to achieve higher user satisfaction.Therefore,the model improves the redundancy and irrelevancy of requirements by more than 90%compared to other clustering methods and the analytical hierarchical process,achieving an 80%fault detection rate at an earlier stage.Hence,it provides guidelines for practitioners and researchers in the modern era.In the future,we will provide the working prototype of this model for proof of concept.

Error Analysis of the English Renderings of Public and Scenic Signs in Zunyi

在研究遵义市600多幅具有英文翻译的公示语基础上．本论文根据“错误理论”从语言和文化方层次分析了翻译错误的分布．并找出7种导致翻译错误的主要原因，同时也提出了解决这些翻译错误的建议措施。

Emission Theory with Re-Emission of Photons by the Medium—Instead of Special Relativity

Instead of relying on the erroneous principles of Special Relativity, this paper proposes a new theory based on the emission of photons by a source and their re-emission by a transparent medium. Through over 60 articles, we have demonstrated that Special Relativity is based on optical experiments and observations that have been incorrectly explained by the theory of a non-existent ether. Our findings show that all known experiments can be explained using classical concepts of space and time, thereby refuting the theory of relativity. This article also addresses the fallacy of the widely accepted etheric Doppler effects and its significant role in the history of science.

Variation Character of Grain Yield per Unit Area in Main Grain-producing Area of Northeast China

Based on the surveys and the statistic data during 1980-2003, the variation character of grain yield per unit area in Northeast China and its main factors have been discussed by the methods of statistics and grey correlation analysis. The results show that: 1) the grain yield per unit area has been taking on an increasing trend in the recent 20 years. It increased from 2519.80kg/ha in 1980 to 4216.11kg/ha in 2003, with an increasing rate of 67.32%; 2) the variation of grain yield per unit area is considerably prominent and its range is also very great, with the maximal increase rate of 42.59% and maximal decrease rate of 21.13%, respectively, which are far above the whole Chinese average level; 3) the variation of main crops' yield per unit area is remarkable, which takes on the character that the yield of corn is much higher than that of soybean and rice; and 4) the grey correlation analysis shows that the most important factors impacting the variation of grain yield per unit area are the total power of agricultural machinery, the consumption of chemical fertilizer and effective irrigated area. However, the influence of natural disaster and income level should not be ignored. Effective ways to improve grain yield per unit area are to construct farmland improvement groundwork, reclaim the middle- and low-yield farmland, etc.

Analysis on the Disastrous Weather of Serious Drought in Northwest Hunan in Summer and Autumn of 2009

[Objective] The research aimed to analyze the disastrous weather of serious drought in Northwest Hunan in summer and autumn of 2009.[Method] According to the meteorological data in Zhangjiajie of Northwest Hunan during the drought period from June to September,2009,the disaster characteristics of continuous drought in summer and autumn were analyzed.Based on NCEP/NCAR 2.5°×2.5° reanalysis data,by using the climatic diagnostic method,the formation reason of serious drought was initially analyzed from the circulation characteristics in the middle and high latitudes,Western Pacific subtropical high,the abnormal characteristics of sea surface temperature in the equatorial Middle Eastern Pacific Ocean and the tropical system activity.[Result] The characteristics of serious drought in Northwest Hunan in summer and autumn of 2009 were the quick developed speed,wide influence range,long duration,big disaster loss and long high temperature time.The influence range,duration and harm degree were rare to see in the history.During the arid period(June-September),the atmospheric circulation was abnormal.The polar vortex in the northern hemisphere was weak,and the center was by north.It was two-trough-one-ridge type in the middle and high latitudes of Eurasia.The long-wave trough existed respectively near Balkhash Lake and from Sea of Okhotsk to the east coast in China.The long-wave ridge maintained from Lake Baikal to Central Asia and stabilized in 90°-110° E of Central Asia.From the middle dekad of June to the middle dekad of September,the westerly index increased.The zonal circulation was the main one in the middle and high latitudes of Eurasia.The cold air in the high-latitude frontal zone spread eastward with the small-amplitude fluctuation form along the latitude circle direction,and was difficult to pass the westerly barrier near 45° N to reach the low latitude.Meanwhile,Western Pacific subtropical high jumped northward to control Jiangnan and South China for a long time.The down airflow was prevalent.It was hot and rainless.The drought developed quickly.The sea surface temperature in the equatorial Middle Eastern Pacific Ocean started to rise in June,and it entered into El Nino state.When El Nino event of obvious temperature increasing started to appear in spring and summer,the plum rain amount was less in the middle and low reaches of Yangtze River in the year or next year.The probability was 80%.In El Nino year,the typhoon was less.In addition,for the influence of strong Western Pacific subtropical high,the landing pathway of typhoon was by east or south.The kind of typhoon had the small role for easing the drought in Northwest Hunan.[Conclusion] The research provided the theory basis for improving the prediction level of short-term climate and the understanding of extreme climate event.

The Analysis of Dimensionless Magnitudes in Economic Science

An economy consists of the economic system of a country or other unit of human society.It includes labor,capital,natural resources,production,trade,distribution and consumption of goods and services in the area where human society is active.These factors give context,content,and determine the conditions and parameters with which the economy operates.When searching with data mining techniques to identify or find out dimensionless groups(DGs)in technical literature,it is possible to meet errors/faults/omissions concerning both,the form and the content of such groups.In the present study,a methodological framework has been developed in terms of a logical flow chart,including 11 activity stages and seven decision nodes,to acquire/process/store/retrieve knowledge for reconstruction and identification of these groups.Case Based Reasoning(CBR),especially modified to meet the needs of this work,has been used for tracing causality paths by similarity and making correction suggestions.Two case examples are presented to prove the functionality of the proposed methodology.Non-dimensional groups are used in engineering but can also be used in economic science.Through this analysis,we can calculate the scale of industrial processes from laboratory to pilot and then factory scale.Still through the study of non-dimensional groups,it is easy to calculate economies of scale embedded in the production process.Synergy savings and target economies cause economies of scale in a production process and reduce the cost of production per unit of output when production is increased.Non-dimensional groups can be a quantitative and measurable indicator for calculating and predicting economies of scale in an industrial unit.The same can happen in an economic unit providing services,that is,intangible products.

A DEEP ANALYSIS OF THE CHARACTER IN TESS OF D'URBERVILLES BY HARDY

A good novel depends on the success in portraying the characters in it. In Tess of the D'Urbervilles,Tess is a beautiful country girl. In this novel,she is a new woman. She is not submissive to man and full of rebel spirit. Because she is educated,she has a strong self-respect. The more important is that after being seduced,she not only maintains her virtue but also becomes stronger. Her true and pure love for Clare drives her to break the convention and tolerate others' satire.

Study on the Urbanization of Nanjing City and Its Greenhouse Effect

To study the relationship between the enlargement of Nanjing City and urban greenhouse effect,the temperature of Nanjing Station and its suburban stations during 1961-2000 was analyzed.The results showed that the temperature of Nanjing area has increased gradually and the urban heat island effect has developed quickly.The average temperature increment in winter is the greatest,followed by that in spring,autumn and summer,most of which was caused by the greenhouse effect in Nanjing area.Finally several effective countermeasures have been proposed correspondingly.

Historical Changes of Ningxia Natural Disasters and Its Reason Analysis

A quantitative model is built and the historical variation of natural disasters is analyzed in this paper,by using materials as affected area(damaged area),affected population(dead and injured),casualty of livestock,collapsed houses(damaged houses),decrease of crops yield,economic loss(direct and indirect) and price index over the same period of Ningxia natural disasters(include drought,flood,gale and hail,frost,pest disasters and other disasters) during 1978-2007,and applying gray correlation analysis method.The long-term changes trend of natural disasters is analyzed by the application of the least squares method for linear trend,and the oscillation period is analyzed by using the maximum entropy statistical method.It is found that natural disasters have basically 2 to 3 years of variation period either in the whole region or in the individual regions;from the mid 1980s to the late 1990s,Ningxia is in an oscillation period with disasters attacked frequently in decadal and interannual scale under the background of climate;the increase of damage intensity of natural disasters slow down and tends to decrease since 2000.

Dynamic character analysis for the arc welding power source based on fuzzy logic

A lot of experimental methods have been brought forth to assess the dynamic character of the arc welding power source, but up to now, this issue has not been solved very well. In this paper, based on the fuzzy logic reasoning method, a dynamic character assessing model for the arc welding power source was established and used to analyze the dynamic character of the welding power source. Three different types of welding machine have been tested, and the characteristic information of the electrical signals such as re-striking arc voltage, low welding current and so on of the welding process were extracted accurately by using a self-developed welding dynamic arc wavelet analyzer. The experimental results indicate that this model can be used as a new assessing method for the dynamic character of the arc welding power source.

Main characters analysis of Pride and Prejudice

该论文主要谈到的是对小说《傲慢与偏见》的人物分析.它向读者展示了该小说中一个个人物的生动画面,如机智而有魅力的伊丽莎白,美丽而纯洁的简,温柔而帅气的宾格利,骄傲而正直的达西,丑恶而势利的柯林斯,以及小气而傲慢的凯瑟林夫人……