High potassium to magnesium ratio affected the growth and magnesium uptake of three tomato(Solanum lycopersicum L.) cultivars

Potassium(K) and magnesium(Mg) levels and their balances are two factors affecting the growth of plant. However, the responses of different crop cultivars to K/Mg ratios are less clear. This study was aimed at assessing the different responses of tomato(Solanum Lycopersicum L.) cultivars to the different K/Mg supply ratios. Three tomato cultivars(Zhongza 9(ZZ), Gailiangmaofen(MF), and Jinpengchaoguan(JP)) were grown in pots with three different K+/Mg2+ratios(4:0, 4:1 and 8:1, represented by K/Mg4:0, K/Mg4:1, and K/Mg8:1, respectively). Compared with K/Mg4:1treatment, the leaf chlorophyll content, net photosynthetic rate, and total biomass of tomato seedlings under K/Mg4:0treatments were decreased by 69.7, 89.1, and 53.1%, respectively. The Mg deficiency symptoms were observed when the Mg content in shoot became lower than 4 mg g–1DW. Compared with K/Mg4:1treatment, total biomass of tomato seedlings of K/Mg8:1treatment was decreased by 21.6%; the shoot and root Mg contents were decreased by 10.4 and 21.8%, respectively; and Mg uptake of tomato was reduced by 34.1%. There were significant differences in biomass and Mg uptake for the three cultivars between the different K+/Mg2+treatments. The Mg uptake of the three different cultivars ranked as ZZ>JP>MF under Mg deficiency and high K condition. In conclusion, the growth and Mg uptake and allocation of tomato were influenced significantly by imbalance K and Mg supply. JP and ZZ were the cultivars with the highest efficiency in Mg uptake.

Effects of Foliar Spraying of Magnesiumpotassium Sulfate Fertilizer on Absorption of Magnesium, Potassium and Calcium in Differentposition Tobacco Leaves

[Objective] ln the Mg-deficient （exchangeable Ca/Mg ratio ＆gt; 20） tobacco-growing areas in Qujing City of Yunnan Province, the ratio of Ca/Mg was adjusted by applying Mg fertilizer in soil and spraying Mg fertilizer on tobacco leaves. ln ad-dition, the effects of Mg fertilization on the absorption of K, Ca and Mg in flue-cured tobacco leaves were investigated, providing theoretical basis and production guidance for the balanced fertilization technology in the Mg-deficient flue-cured to-bacco-growing areas in Qujing City of Yunnan Province. [Method] The field plot test and randomized complete block design were adopted in this research. The group without Mg fertilization was treated as control. There were 3 treatment groups for foliar spraying of magnesium-potassium sulfate fertilizer and 2 treatment groups for soil application ＋ foliar spraying of magnesium-potassium sulfate fertilizer. The tobac-co roots, stems, lower leaves, middle leaves and upper leaves were dried and weighed. They were grinded for the determination of K, Ca and Mg content. The total K, Ca and Mg content in upper （B2F）, middle （C3F） and lower （X2F） flue-cured tobacco leaves in each plot was measured. [Result] The foliar spraying and soil application ＋ foliar spraying al increased the absorption of Mg and K in middle and lower tobacco leaves and the absorption of Ca in lower tobacco leaves, but de-creased the absorption of Mg, K and Ca in upper leaves and the absorption of Ca in middle leaves. Among the positions, the accumulated distribution of Mg, K and Ca ranked as middle leaves ＆gt; lower leaves ＆gt; upper leaves. With the application of Mg fertilizer, the Ca/Mg ratio and K/Mg ratio al decreased in middle and upper to-bacco leaves; while the Ca/Mg ratio increased in the lower tobacco leaves, and the K/Mg ratio showed no significant difference among treatment groups. [Conclusion] The foliar spraying and soil application ＋ foliar spraying of magnesium-potassium sulfate fertilizer affected the Ca/Mg ratio and K/Mg ratio in tobacco leaves mainly through affecting the absorption of Mg.

Synthesis of platy potassium magnesium titanate and its application in removal of copper ions from aqueous solution

Platy potassium magnesium titanate (K0.8Mg0.4Ti1.6O4, KMTO) was synthesized by a flux method. The potential application of KMTO in removing copper ions from water pollutants was investigated. The crystal phases of specimens were identified by XRD. The morphology and structural information were characterized by SEM and TEM. The adsorption behavior under different conditions was investigated, including different pH values and different initial copper ion concentrations. The results show that the maximum adsorption capacity of Cu(II) ions is 290.697 mg/g, and almost 99.9% of Cu(II) ions can be removed, which is much higher than that of other sorbents reported. The kinetics of KMTO for the adsorption of Cu(II)ions was studied and the best fit can be obtained by the pseudo-second-order model. Adsorption isothermal data can be well interpreted by the Freundlich equation (R2=0.991). In conclusion, this study highlights that KMTO is a potential material for the efficient removal of heavy metal ions in polluted water. It also opens up a new opportunity for the applications of platy KMTO.

The unimodal latitudinal pattern of K,Ca and Mg concentration and its potential drivers in forest foliage in eastern China

Potassium(K),calcium(Ca),and magnesium(Mg)are essential elements with important physiological functions in plants.Previous studies showed that leaf K,Ca,and Mg concentrations generally increase with increasing latitudes.However,recent meta-analyses suggested the possibility of a unimodal pattern in the concentrations of these elements along latitudinal gradients.The authenticity of this unimodal latitudinal pattern,however,requires validation through large-scale field experimental data,and exploration of the underlying mechanisms if the pattern is confirmed.Here,we collected leaves of common species of woody plants from 19 montane forests in the north-south transect of eastern China,including 322 species from 160 genera,67 families;and then determined leaf K,Ca,and Mg concentrations to explore their latitudinal patterns and driving mechanisms.Our results support unimodal latitudinal patterns for all three elements in woody plants across eastern China,with peak values at latitude 36.5±1.0°N.The shift of plant-functional-type compositions from evergreen broadleaves to deciduous broadleaves and to conifers along this latitudinal span was the key factor contributing to these patterns.Climatic factors,mainly temperature,and to a lesser extent solar radiation and precipitation,were the main environmental drivers.These factors,by altering the composition of plant communities and regulating plant physiological activities,influence the latitudinal patterns of plant nutrient concentrations.Our findings also suggest that high leaf K,Ca,and Mg concentrations may represent an adaptive strategy for plants to withstand water stress,which might be used to predict plant nutrient responses to climate changes at large scales,and broaden the understanding of biogeochemical cycling of K,Ca,and Mg.

Effects of Paper Mill Sludge on Potassium, Sodium, Calcium, and Magnesium Concentrations in Different Soybean Cultivars

A field experiment was conducted on a sandy loam soil at an Experimental Farm in Taejon, South Korea, to determine the effects of paper mill sludge compost application rates on K, Na, Ca and Mg concentrations of soybean (Glycine max (L.) Merr.) aboveground tissues and the genotypic effects on the concentrations of these elements. Sludge compost treatments of 0, 75, and 150 t ha-1 were applied to 30 diverse soybean cultivars. Concentrations of K, Na, Ca, and Mg in aboveground tissues harvested 69 days after …

Low Magnesium with High Potassium Supply Changes Sugar Partitioning and Root Growth Pattern Prior to Visible Magnesium Deficiency in Leaves of Rice (<i>Oryza sativa</i>L.)

This research was conducted to investigate the effects of low magnesium (Mg) with high potassium (K) supply on the Mg concentration, sugar partitioning and root growth of rice (Oryza sativa L. cv. Wuyunjing 7) plants grown in hydroponics under greenhouse conditions, at Nanjing Agricultural University, China. The nutrient solution contained 0.01 and 1.0 mM Mg concentration, with K at 1.0 and 6.0 mM. Compared with the control (1mM Mg and K) treatment, the soluble sugar content at the treatment of low Mg (0.01 mM) with high K (6 mM) decreased by 35.7% in leaves, whereas increased 29.2% in roots at day 15 after treatment initiation. The shoot dry weight (DW) declined 12.9%, but root DW increased 12.1% leading to the significant increase in the root to shoot ratio at day 30. Furthermore, the total root length, total root surface area, root volume, average root diameter, total length of 0 - 0.5 mm and 0.5 - 1.0 mm diameter roots at day 30 significantly increased by 11.8%, 16.4%, 25.3%, 8.1%, 16.6% and 12.5%, respectively. Correlation analysis revealed the root to shoot ratio is closely related to the soluble sugar contents in roots and root morphological parameters of rice at day 15 and day 30. The typical visible symptoms of Mg deficiency in leaves of rice were obtained in the treatment of low Mg with high K at day 35. These findings indicated that low Mg with high K supply altered sugar partitioning and root morphological parameters, resulting in the increased root to shoot ratio prior to visible Mg deficiency symptoms in rice leaves. The increase in root to shoot ratio maybe an important adaptive mecha-nism for rice plants to respond to low-Mg stress during the early growth stage.

Effects of Co-Existing Ions on the Phosphorus Potassium Ratio of the Precipitate Formed in the Potassium Phosphate Crystallization Process

Livestock wastewater is mainly treated with activated sludge, but ions such as phosphorus, potassium, ammonium, nitrate and sulfate remain in the effluent. In this study, the effects of residual ions on phosphorus recovery using the magnesium potassium phosphate crystallization method were investigated when magnesium was added to increase the pH. If co-existing ions affect the products, the phosphorus to potassium molar ratio (K/P ratio) of the precipitate will deviate from being equimolar. Artificial wastewater test solutions containing 5.6 - 20.3 mM ammonium, 25.6 mM potassium, 6.5 mM phosphorus, 0 - 7.35 mM nitrate, and 0 - 3.06 mM sulfate were used. First, the optimum operating pH and amount of magnesium added to give a high phosphorus removal rate and recovery rate were determined. The experimental setup was a 10 L aerated and stirred reactor, and a 5 L settling tank. The K/P ratio in precipitate was approximately 1 using the optimum conditions. Continuous 2 h treatment allowed a white precipitate containing about 30 g of needle-like crystals to be obtained. Next, the effects of varying the ammonium, nitrate, and sulfate ion concentrations in the artificial effluent were investigated. Ammonium and sulfate ion concentrations of 8 mM or more and 3 mM or more, respectively, caused the K/P ratio to decrease to about 0.7 and 0.5, respectively. Varying the nitrate concentration did not affect the K/P ratio, even at a nitrate concentration of 7.35 mM.

Great Breakthrough Achieved in Extraction of Lithium from Brine with High Magnesium to Lithium Ratios

With the worldwide rise in electric vehicles, the demand for lithium batteries is increasing day by day. In 2015, China＇s new energy vehicles developed rapidly, and the price of lithium carbonate rose from fifty or sixty thousand yuan per ton to 150 thousand yuan. In the past, lithium was often extracted from spodumene （LiAlSi2O6）, which is time consuming, laborious and expensive. Over the past decade, abundant lithium has been discovered in brackish and salt water lakes, which is an important way to obtain lithium resources.

The copolymerization of L-lactide andε-caprolactone using magnesium octoate as a catalyst

Copolymerizations of L-lactide （L-LA） and ε-caprolactone （ε-CL） were conducted in bulk using magnesium octoate as a catalyst. The reactivity ratios of L-LA and ε-CL were determined to be rL=23 and rc=0.22, respectively. The sequence analyses of the copolymers were performed on ^13C NMR. An increase in the reaction temperature enhances the role of transesterification and the extent of randomness.

Effect of Initial Microstructure Prior to Extrusion on the Microstructure and Mechanical Properties of Extruded AZ80 Alloy with a Low Temperature and a Low Ratio

Magnesium(Mg)alloys are the lightest metal structural material for engineering applications and therefore have a wide market of applications.However,compared to steel and aluminum alloys,Mg alloys have lower mechanical properties,which greatly limits their application.Extrusion is one of the most important processing methods for Mg and its alloys.However,the effect of such a heterogeneous microstructure achieved at low temperatures on the mechanical properties is lacking investigation.In this work,commercial AZ80 alloys with different initial microstructures(as-cast and as-homogenized)were selected and extruded at a low extrusion temperature of 220℃and a low extrusion ratio of 4.The microstructure and mechanical properties of the two extruded AZ80 alloys were investigated.The results show that homogenized-extruded(HE)sample exhibits higher strength than the cast-extruded(CE)sample,which is mainly attributed to the high number density of fine dynamic precipitates and the high fraction of recrystallized ultrafine grains.Compared to the coarse compounds existing in CE sample,the fine dynamical precipitates of Mg17(Al,Zn)12form in the HE sample can effectively promote the dynamical recrystallization during extrusion,while they exhibit a similar effect on the size and orientation of the recrystallized grains.These results can facilitate the designing of high-strength wrought magnesium alloys by rational microstructure construction.

Effect of mole ratio of Y to Zn on phase constituent of Mg-Zn-Zr-Y alloys

The phase constituent evolution of Mg-Zn-Y-Zr alloys with the mole ratio of Y to Zn both in the as-cast and as-annealed states at the Mg-rich corner was investigated by XRD and SEM/EDS analysis and was further explained from the ternary phase diagram calculation. The results show that the formation of the secondary phases in Mg-Zn-Y-Zr alloys firmly depends on the mole ratio of Y to Zn, and X （Mg 12 YZn）-phase, W （Mg 3 Y 2 Zn 3 ）-phase and I （Mg 3 YZn 6 ）-phase come out in sequence as the ratio of Y to Zn decreases. The mole ratios of Y to Zn with the corresponding phase constituent are suggested quantitatively as follows： the phase constituent is α-Mg ＋ I when the mole ratio of Y to Zn is about 0.164; α-Mg ＋ I ＋W when the mole ratio of Y to Zn is in the range of 0.164 0.33;α-Mg ＋W when the mole ratio of Y to Zn is about 0.33; α-Mg ＋W＋X when the mole ratio of Y to Zn is in the range of 0.33 1.32; and α-Mg ＋X when the mole ratio of Y to Zn is about 1.32. The results also offer a guideline for alloy selection and alloy design in Mg-Zn-Y-Zr system.

Effect of Borax on Hydration and Hardening Properties of Magnesium and Pottassium Phosphate Cement Pastes

Magnesium and potassium phosphate cement （MKPC） sample were prepared by mixing dead burnt MgO powder, potassium phosphate and different dosages of retarder borax to investigate the effect of borax on its hydration and hardening characteristics. The pH value, fluidity, hydration temperature and strength development of MKPC paste were investigated, and the mineralogical composition and microstructural morphology of its hydration products were analyzed. The experimental results indicated that, within a certain dosage, borax caused an endothermal effect for MKPC paste, which decreased the early hydration rate of MKPC paste, increased the fluidity of MKPC paste. Thus, strength and micro-morphology of hardened MKPC are affected. It can be concluded that borax in MKPC paste retards the early hydration rate of MKPC paste by forming a film onto surface of MgO, decreasing the temperature and increasing the pH value of the system. As borax dosage varying, different factors may dorminate the effects.

High Potassium Aggravates the Oxidative Stress Inducedy by Magnesium Deficiency in Rice Leaves

Magnesium （Mg） deficiency in plant affects photosynthesis and many other metabolic processes. Rice （Oryza sativa L. cv. ＇Wuyunjing 7＇） plants were grown in hydroponics culture at three Mg and two potassium （K） levels under greenhouse conditions to examine the induction of oxidative stress and consequent antioxidant responses in rice leaves due to Mg deficiency. At low Mg （0.2 mmol L 1 Mg supply for two weeks after transplanting） and high K （6 mmol L^-1） for 21 days, the rice plants showed severe Mg deficiency and a significant decreases in the dry matter production. The Mg deficiency in leaves decreased chlorophyll concentrations, photosynthetic activity, and soluble protein, but significantly increased the concentrations of soluble sugars and malondialdchyde （MDA） and the activities of superoxide dismutase （SOLD, EC 1.15.1.1）, catalase （CAT, EC 1.11.1.6） and peroxidase （POD, EC 1.11.1.7）. In addition, Mg concentrations in the leaves and in the shoot biomass were negatively related to the activities of the three antioxidative enzymes and the concentration of MDA in leaves. There were very significant interactive effects between Mg and K supplied in the culture solution on shoot biomass yield, chlorophyll content, photosynthesis rate, the activities of SOD, CAT and POD, and MDA content in the leaves of rice. It is suggested that the high K level in the nutrient solution aggravated the effect of low Mg supply-induced Mg deficiency and created the oxidative damage in rice plants.

Influence of MgO/MgCl_2 Molar Ratio on Phase Stability of Magnesium Oxychloride Cement

Formation, solution and phase change of hydration products in MgO-MgCl2-H2O system was studied with thermodynamics method, and resistance to water immersion and phase change of magnesium oxychloride cement with different MgO/MgCl2 molar ratio was experimented. The results show that pH value of immersion solution of cement paste has a remarkable influence on phase stability of hydration products. A higher pH value leads to a lower solubility and a better phase stability of hydration products. When the solution pH value is higher than 10.37, the precipitation of much Mg（OH）2 crystal induces a worse phase stability of hydration products. With the increasing MgO/MgCl2 molar ratio （lower than 6）, the more amount of MgO in the hydration products enhances the alkalinity of solution and the phase stability is improved. However, when the MgO/MgCl2 molar ratio is higher than 6 and the excessive MgO exsits in the hydration products, the cement paste may be damaged by the excessive crystallization stress of a great deal of Mg（OH）2 formation.

Effect of extrusion ratio on microstructure and mechanical properties of AZ91D magnesium alloy recycled from scraps by hot extrusion

A method for recycling AZ91D magnesium alloy scraps directly by hot extrusion was studied.Various microstructural analyses were performed using the techniques of optical microscopy,scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS).Microstructural observations revealed that all the recycled specimens consisted of fine grains due to the dynamic recrystallization.The main strengthening mechanism of the recycled specimen was grain refinement strengthening and homogeneous distribution of oxide precipitates.The interfaces of individual scraps of extruded materials were not identified when the scraps were extruded with the extrusion ratio of 40-1.Oxidation layers of the scraps were broken into pieces by high compressive and shear forces under the extrusion ratio of 40-1.The ultimate tensile strength and elongation to failure increased with increasing the extrusion ratio.Recycled specimens with the extrusion ratio of 40:1 showed higher ultimate tensile strength of 342.61 MPa and higher elongation to failure of 11.32%,compared with those of the cast specimen.

Effects of Potassium Aspartate and Magnesium on Ventricular Arrhythmia in Ischemia-reperfusion Rabbit Heart

The aim of this study was to determine if the potassium aspartate and magnesium （PAM） prevent reperfusion-induced ventricular arrhythmias （RIVA） in ischemia-reperfusion （IR） rabbit heart. Thirty rabbits were randomly divided into control, ischemia and PAM groups. Arterially-perfused rabbit left ventricular preparations were made, and transmural ECG as well as action potentials from both endocardium and epicardium were simultaneously recorded in the whole process of all experiments. In control group rabbit ventricular wedge preparations were continuously perfused with Tyrode＇s solution, and in ischemia group and PAM groups the perfusion of Tyrode＇s solution was stopped for 30 min. Then the ischemia group was reperfused with Tyrode＇s solution and the PAM group with Tyrode＇s solution containing 2.42 mg/L PAM, respectively. ECG, QT interval, transmural repolarization dispersion （TDR） and action potentials from epicardium and endocardium were simultaneously recorded, and the RIVA of the wedge preparation was observed. Compared with control group, TDR and incidence of RIVA were significantly increased in ischemia group （P〈0.05）. The incidence of RIVA in control, ischemia and PAM group was 0/10, 9/10 and 1/10, respectively. Compared with ischemia group, TDR and incidence of RIVA were significantly reduced in PAM group （P〈0.05）. Potassium aspartate and magnesium significantly reduce TDR and prevent ventricular arrhythmia in ischemic rabbit heart.

Study of HCP→FCC phase transformation mechanism under different hot compression rates of AZ31 magnesium alloy

At present,there are few studies on the phase transition during the thermocompression plastic deformation of magnesium alloy.In this study,the evolution model of thermal compression plastic of AZ31 magnesium alloy was constructed by molecular dynamics,and the phase transition relationship between HCP and FCC at different thermal compression rates was studied.By combining GLEEBLE thermal compression experiment with transmission electron microscopy experiment,high-resolution transmission electron microscopy images were taken to analyze the transition rules between HCP and FCC during plastic deformation at different thermal compression rates,and the accuracy of molecular dynamics analysis was verified.It is found that the slip of Shockley’s incomplete dislocation produces obvious HCP→FCC phase transition at low strain rate and base plane dislocation at high strain rate,which makes the amorphous phase transition of HCP→OTHER more obvious,which provides theoretical guidance for the formulation of forming mechanism and preparation process of magnesium alloy.

The Effect of Water and Salt Stress on Paspalum dilatatum,a Constituent of Pampas Natural Grasslands

The effects of the salt stress on plant growth are usually increased by the water stress.We studied the impact of both stresses in simultaneous pulses of drought and salinity on Paspalum dilatatum.This forage species is native to South America,spread in grasslands in many tropical,subtropical,and temperate areas of the world,and very common in grasslands of the Flooding Pampas of Argentina.Mimicking what happens in nature.We compared a pot experiment,a non-stressed control against water stress for a month(midpoint between field capacity and wilting point),and two saline stresses(moderate,6 d·Sm^(−1)and strong,12 d·Sm^(−1)),also for a month.Aerial biomass(green leaf;non-leaf green material,and dry material)and roots were harvested,weighed,and analyzed for nitrogen,phosphorus,and cations.The biomass of all components significantly decreased when both stresses were applied.Water plus strong saline stress reduced by half the total biomasses,compared to the control.The proportion of aerial biomass/root biomass ratio as well as aerial green component/dry materials ratio tend to decrease when subjected to both stresses.Nitrogen concentration in plants was not significantly affected,but phosphorus concentration increased in aerial biomass components,from 0.10 to 0.18 mg·kg^(−1)between the extreme treatments,but did not change in roots.Sodium concentration in plants increased(i.e.,in green leave sodium(Na)increased from 0.27 to 2.01 mg·kg^(−1)between the extreme treatments),whereas other cations either did not change or decreased,affecting the ratios between them.Sodium performance allows us to infer that the Na accumulation of P.dilatatum behaves in an intermediate range,compared to very tolerant to salts or non-salt tolerant species of the Paspalum genus.In agreement,when salts were applied in the form of a pulse,P.dilatatum tolerated higher salinity than that found by other authors for the same species,using continuous salinity.

Preparation of Layered Potassium Titanate Whiskers with Large Length-diameter Ratio by KDC Method

Pure K2Ti4O9 whiskers were prepared by KDC（Kneading-Drying-Calcination） method with TiO2 and K2CO3 as raw materials. The influences of TiO2/K2CO3 molar ratio（RT/K）, calcination temperature（TC） and cooling process on phase composition and morphology of the whiskers were investigated by TG-DSC（thermo gravimetric-differential scanning calorimeter）, XRD（X-ray diffraction）, and SEM（scanning electron microscope）. Pure K2Ti4O9 potassium titanate whiskers with large length-diameter ratio（r）（over 250） can be obtained at RT/K = 2.9 and TC = 950 ℃.

Direct Determination of Potassium-Sodium Activity Ratio in Soil Suspension with Two Ion-Selective Electrodes

A K+-selective electrode and a Na+-selective electrode were used to construct a measuring cell without liquid-junction for the determination of the ion activity ratio of K+ to Na+ in soil suspensions. The measured cell potential was not affected by the total electrolyte concentration when the total cation concentration was 10-1-10-3 mol L-1 and the concentration ratio CK+ / CNa+. was 10:1 to 1:50. When the concentration ratios were equal to 1and the total electrolyte concentrations were 10-2 and 10-3 mol L-1, the ion activity ratio measurement would not be affected by pH in the pH range of 3.5 to 11.5 and 4.4 to 11 respectively. Ions other than H+ have no remarkable influence on the measurement. The ion activity ratio of K+ to Na+ measured directly in soil suspension agree well with those in centrifuged supernant solution. The relative deviation was within 4%. From the measured ion activity ratio, the difference of the bonding energies of K+ and Na+ ions was calculated.