A lot of new gold deposits have been found on the eastern margin of the Qinghai-Tibet Plateau during the past two decades. Among them, three main types of gold deposits have been recognized, including quartz-vein-type...A lot of new gold deposits have been found on the eastern margin of the Qinghai-Tibet Plateau during the past two decades. Among them, three main types of gold deposits have been recognized, including quartz-vein-type, shear- zone-type and porphyry-type. The former two types of gold deposits are mainly hosted within metamorphic rocks, while the latter is related to Cenozoic magmatism. Although all of these gold deposits are believed to have been formed during the uplift process of the Qinghai-Tibet Plateau in the Cenozoic era (Wang et al., 2002b), precise isotopic age constraints have still been lacking until quite recently. This paper presents new 40Ar/39Ar data of some gold deposits on the eastern margin of the Qinghai-Tibet Plateau, which indicate that gold mineralization in the region occurred in response to the episodic stages of the orogenies. Recently obtained 40Ar/39Ar data on quartz and feldspars from several gold deposits, such as the Sandiao deposit, the Baijintaizi deposit, the Pusagang deposits, provide new constraints on gold mineralization on the eastern margin of the Qinghai-Tibet Plateau. Geochronological studies of gold deposits along the Daduhe River indicate that there are three stages of gold mineralization. The early two stages occurred as early as 65.1 Ma in the Shuibaiyang deposit and 58.95 Ma in the Ruoji deposit, while the latter stage occurred as late as 25.35 Ma in Baijintaizi and 24.70 Ma in Sandiao. Isotopic dating of three plagioclases from the Beiya deposit, Zhifanggou deposit and Luobodi deposit and a K-feldspar from the Jinchangqing deposit in Yunnan Province indicates that these deposits were formed at two stages. The Zhifanggou and Jinchangqing deposits have early stage records as old as 58.82 Ma in Zhifanggou and 55.49 Ma in Jinchangqing, but all of the above four deposits in Yunnan have late stage records of 23.18 Ma in Jinchangqing, 24.54 Ma in Zhifanggou, 24.60 Ma in Luobodi and 24.56 Ma in Hongnitang. The above results suggest that the gold deposits on the eastern margin of the Qinghai-Tibet Plateau were formed concentratedly at two main episodes, i.e. the end of the Paleocene (about 58 Ma) and the boundary between the Paleogene and the Neogene (about 25 Ma). The later episode appears to be looks like more important and was coupled with the Sichuan movement, which was extensively activated at that period. The beginning of the Cenozoic Era (about 65 Ma) might be another episode of gold mineralization, but only one deposit (Shuibaiyang) in this study has been proved to have been be formed at this stage and might be earlier than the initial collision between the Indian Plate and the Eurasia Plate. In view of geology, the above three episodes of gold mineralization are associated with three events of tectonic- magmatism and/or fluid events. Even though the gold deposits (for example, the Shuibaiyang deposit, Ruoji deposit and Pusagang deposit) were formed at different episodes, all of them are genetically related to tectonic movements in large- scale shear zones. It looks like theat tectonic events (including large-scale strike-slip) between Paleogene and Neogene had a wide influence upon gold mineralization, with new deposits formed and old deposits enriched or superimposed to be a higher grade by new stage of mineralization. The above data suggest that gold deposits were not only concentrated in some areas, but also formed mainly at different boundaries of geological times, indicating that there existed some peak stages of gold mineralization (metallogenic episodes), and that the gold deposits were formed mainly by episodic mineralization.展开更多
The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block, also being the northern segment of the North-South Seismic Belt, is characterized by considerably high ...The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block, also being the northern segment of the North-South Seismic Belt, is characterized by considerably high seismicity level and high risk of strong earthquakes. In view of the special tectonic environment and deep tectonic setting in this area, this study used two seismic wide-angle reflection/refraction cross profiles for double constraining, so as to more reliably obtain the fine-scale velocity structure characteristics in both the shallow and deep crust of individual blocks and their boundaries in the study area, and further discuss the seismogenic environment in seismic zones with strong historical earthquakes. In this paper, the P-wave data from the two profiles are processed and interpreted, and two-dimensional crustal velocity structure models along the two profiles are constructed by travel time forward modeling. The results show that there are great differences in velocity structure, shape of intra-crustal interfaces and crustal thickness among different blocks sampled by the two seismic profiles. The crustal thickness along the Lanzhou-Huianbu-Yulin seismic sounding profile （L1） increases from -43 km in the western margin of Ordos Block to -56 km in the Qilian Block to the west. In the Ordos Block, the velocity contours vary gently, and the average velocity of the crust is about 6.30 km s^-1; On the other hand, the velocity structures in the crust of the Qilian Block and the arc-like tectonic zone vary dramatically, and the average crustal velocities in these areas are about 0.10 km s^-1 lower than that of the Ordos Block. In addition, discontinuous low-velocity bodies （LVZ1 and LVZ2） are identified in the crust of the Qilian Block and the arc-like tectonic zone, the velocity of which is 0.10-0.20 krn s^-1 lower than that of the surroundings. The average crustal thickness of the Ordos Block is consistently estimated to be around 43 km along both Profile L2 （Tongchuan-Huianbu-Alashan left banner seismic sounding profile） and Profile L1. In contrast to the gently varying intra-crustal interfaces and velocity contours in the Ordos Block along Profile L 1, which is a typical structure characteristic of stable cratons, the crustal structure in the Ordos Block along Profile L2 exhibits rather complex variations. This indicates the presence of significant structural differences in the crust within the Ordos Block. The crustal structure of the Helan Mountain Qilian Block and the Yinchuan Basin is featured by ＂uplift and depression＂ undulations, showing the characteristics of localized compressional deformation. Moreover, there are low-velocity zones with altemative high and low velocities in the middle and lower crust beneath the Helan Mountain, where the velocity is about 0.15-0.25 km s^-1 lower than that of the surrounding areas. The crustal thickness of the Alxa Block is about 49 kin, and the velocity contours in the upper and middle-lower crust of the block vary significantly. The complex crustal velocity structure images along the two seismic sounding profiles L1 and L2 reveal considerable structural differences among different tectonic blocks, their coupling relationships and velocity structural features in the seismic zones where strong historical earthquakes occurred. The imaging result of this study provides fine-scale crustal structure information for further understanding the seismogenic environment and mechanism in the study area.展开更多
基金the Major State BasicResearch Program of China(G19992043203)underthe State Science and Technology Commission,the National Natural Science Foundation of China(No.40202012)+1 种基金the State Planning Commission(Special Program 98-1) the Ministry of Land and Resources(K1.4-3-4).
文摘A lot of new gold deposits have been found on the eastern margin of the Qinghai-Tibet Plateau during the past two decades. Among them, three main types of gold deposits have been recognized, including quartz-vein-type, shear- zone-type and porphyry-type. The former two types of gold deposits are mainly hosted within metamorphic rocks, while the latter is related to Cenozoic magmatism. Although all of these gold deposits are believed to have been formed during the uplift process of the Qinghai-Tibet Plateau in the Cenozoic era (Wang et al., 2002b), precise isotopic age constraints have still been lacking until quite recently. This paper presents new 40Ar/39Ar data of some gold deposits on the eastern margin of the Qinghai-Tibet Plateau, which indicate that gold mineralization in the region occurred in response to the episodic stages of the orogenies. Recently obtained 40Ar/39Ar data on quartz and feldspars from several gold deposits, such as the Sandiao deposit, the Baijintaizi deposit, the Pusagang deposits, provide new constraints on gold mineralization on the eastern margin of the Qinghai-Tibet Plateau. Geochronological studies of gold deposits along the Daduhe River indicate that there are three stages of gold mineralization. The early two stages occurred as early as 65.1 Ma in the Shuibaiyang deposit and 58.95 Ma in the Ruoji deposit, while the latter stage occurred as late as 25.35 Ma in Baijintaizi and 24.70 Ma in Sandiao. Isotopic dating of three plagioclases from the Beiya deposit, Zhifanggou deposit and Luobodi deposit and a K-feldspar from the Jinchangqing deposit in Yunnan Province indicates that these deposits were formed at two stages. The Zhifanggou and Jinchangqing deposits have early stage records as old as 58.82 Ma in Zhifanggou and 55.49 Ma in Jinchangqing, but all of the above four deposits in Yunnan have late stage records of 23.18 Ma in Jinchangqing, 24.54 Ma in Zhifanggou, 24.60 Ma in Luobodi and 24.56 Ma in Hongnitang. The above results suggest that the gold deposits on the eastern margin of the Qinghai-Tibet Plateau were formed concentratedly at two main episodes, i.e. the end of the Paleocene (about 58 Ma) and the boundary between the Paleogene and the Neogene (about 25 Ma). The later episode appears to be looks like more important and was coupled with the Sichuan movement, which was extensively activated at that period. The beginning of the Cenozoic Era (about 65 Ma) might be another episode of gold mineralization, but only one deposit (Shuibaiyang) in this study has been proved to have been be formed at this stage and might be earlier than the initial collision between the Indian Plate and the Eurasia Plate. In view of geology, the above three episodes of gold mineralization are associated with three events of tectonic- magmatism and/or fluid events. Even though the gold deposits (for example, the Shuibaiyang deposit, Ruoji deposit and Pusagang deposit) were formed at different episodes, all of them are genetically related to tectonic movements in large- scale shear zones. It looks like theat tectonic events (including large-scale strike-slip) between Paleogene and Neogene had a wide influence upon gold mineralization, with new deposits formed and old deposits enriched or superimposed to be a higher grade by new stage of mineralization. The above data suggest that gold deposits were not only concentrated in some areas, but also formed mainly at different boundaries of geological times, indicating that there existed some peak stages of gold mineralization (metallogenic episodes), and that the gold deposits were formed mainly by episodic mineralization.
基金supported by the Special Projects of Scientific Research of the Earthquake Industry (Grant No. 201408023)the National Natural Science Foundation of China (Grant Nos. 41474076 & 41474077)
文摘The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block, also being the northern segment of the North-South Seismic Belt, is characterized by considerably high seismicity level and high risk of strong earthquakes. In view of the special tectonic environment and deep tectonic setting in this area, this study used two seismic wide-angle reflection/refraction cross profiles for double constraining, so as to more reliably obtain the fine-scale velocity structure characteristics in both the shallow and deep crust of individual blocks and their boundaries in the study area, and further discuss the seismogenic environment in seismic zones with strong historical earthquakes. In this paper, the P-wave data from the two profiles are processed and interpreted, and two-dimensional crustal velocity structure models along the two profiles are constructed by travel time forward modeling. The results show that there are great differences in velocity structure, shape of intra-crustal interfaces and crustal thickness among different blocks sampled by the two seismic profiles. The crustal thickness along the Lanzhou-Huianbu-Yulin seismic sounding profile （L1） increases from -43 km in the western margin of Ordos Block to -56 km in the Qilian Block to the west. In the Ordos Block, the velocity contours vary gently, and the average velocity of the crust is about 6.30 km s^-1; On the other hand, the velocity structures in the crust of the Qilian Block and the arc-like tectonic zone vary dramatically, and the average crustal velocities in these areas are about 0.10 km s^-1 lower than that of the Ordos Block. In addition, discontinuous low-velocity bodies （LVZ1 and LVZ2） are identified in the crust of the Qilian Block and the arc-like tectonic zone, the velocity of which is 0.10-0.20 krn s^-1 lower than that of the surroundings. The average crustal thickness of the Ordos Block is consistently estimated to be around 43 km along both Profile L2 （Tongchuan-Huianbu-Alashan left banner seismic sounding profile） and Profile L1. In contrast to the gently varying intra-crustal interfaces and velocity contours in the Ordos Block along Profile L 1, which is a typical structure characteristic of stable cratons, the crustal structure in the Ordos Block along Profile L2 exhibits rather complex variations. This indicates the presence of significant structural differences in the crust within the Ordos Block. The crustal structure of the Helan Mountain Qilian Block and the Yinchuan Basin is featured by ＂uplift and depression＂ undulations, showing the characteristics of localized compressional deformation. Moreover, there are low-velocity zones with altemative high and low velocities in the middle and lower crust beneath the Helan Mountain, where the velocity is about 0.15-0.25 km s^-1 lower than that of the surrounding areas. The crustal thickness of the Alxa Block is about 49 kin, and the velocity contours in the upper and middle-lower crust of the block vary significantly. The complex crustal velocity structure images along the two seismic sounding profiles L1 and L2 reveal considerable structural differences among different tectonic blocks, their coupling relationships and velocity structural features in the seismic zones where strong historical earthquakes occurred. The imaging result of this study provides fine-scale crustal structure information for further understanding the seismogenic environment and mechanism in the study area.
