The bound weighted average method(BWAM)for predicting S-wave velocity

The shear-wave velocity is a very important parameter in oil and gas seismic exploration, and vital in prestack elastic-parameters inversion and seismic attribute analysis. However, sheafing-velocity logging is seldom carried out because it is expensive. This paper presents a simple method for predicting S-wave velocity which covers the basic factors that influence seismic wave propagation velocity in rocks. The elastic modulus of a rock is expressed here as a weighted arithmetic average between Voigt and Reuss bounds, where the weighting factor, w, is a measurement of the geometric details of the pore space and mineral grains. The S-wave velocity can be estimated from w, which is derived from the P-wave modulus. The method is applied to process well-logging data for a carbonate reservoir in Sichuan Basin, and shows the predicted S-wave velocities agree well with the measured S-wave velocities.

Minimizing the Variance of a Weighted Average

It is common practice in science to take a weighted average of estimators of a single parameter. If the original estimators are unbiased, any weighted average will be an unbiased estimator as well. The best estimator among the weighted averages can be obtained by choosing weights that minimize the variance of the weighted average. If the variances of the individual estimators are given, the ideal weights have long been known to be the inverse of the variance. Nonetheless, I have not found a formal proof of this result in the literature. In this article, I provide three different proofs of the ideal weights.

TOEPLITZ OPERATORS BETWEEN WEIGHTED BERGMAN SPACES OVER THE HALF-PLANE

In this paper,by characterizing Carleson measures,we investigate a class of bounded Toeplitz operator between weighted Bergman spaces with Békolléweights over the half-plane for all index choices.

The Weighted Basis for PHT-Splines

PHT-splines are defined as polynomial splines over hierarchical T-meshes with very efficient local refinement properties.The original PHT-spline basis functions constructed by the truncation mechanism have a decay phenomenon,resulting in numerical instability.The non-decay basis functions are constructed as the B-splines that are defined on the 2×2 tensor product meshes associated with basis vertices in Kang et al.,but at the cost of losing the partition of unity.In the field of finite element analysis and topology optimization,forming the partition of unity is the default ingredient for constructing basis functions of approximate spaces.In this paper,we will show that the non-decay PHT-spline basis functions proposed by Kang et al.can be appropriately modified to form a partition of unity.Each non-decay basis function is multiplied by a positive weight to form the weighted basis.The weights are solved such that the sum of weighted bases is equal to 1 on the domain.We provide two methods for calculatingweights,based on geometric information of basis functions and the subdivision of PHT-splines.Weights are given in the form of explicit formulas and can be efficiently calculated.We also prove that the weights on the admissible hierarchical T-meshes are positive.

THE BOUNDEDNESS OF OPERATORS ON WEIGHTED MULTI-PARAMETER LOCAL HARDY SPACES

Though atomic decomposition is a very useful tool for studying the boundedness on Hardy spaces for some sublinear operators,untill now,the boundedness of operators on weighted Hardy spaces in a multi-parameter setting has been established only by almost orthogonality estimates.In this paper,we mainly establish the boundedness on weighted multi-parameter local Hardy spaces via atomic decomposition.

The UNIFORM C^(0)ESTIMATE AND WEIGHTED ESTIMATE OF GENERALIZED CHRISTOFFEL-MINKOWSKI PROBLEMS

In this paper,we consider generalized Christo®el-Minkowski problems as followsσ_(k)(u_(ij)+uδ_(ij))/σ_(l)(u_(ij)+uδ_(ij))=|u^(p-1)f(x),x∈S^(n),where 0≤l≤k≤n,p-1>0 and f is positive,and we establish the weighted gradient estimate and uniform C^(0)estimate for the positive convex even solutions,which is a generalization of Guan-Xia[1]and Guan[2].

Operational optimization of copper flotation process based on the weighted Gaussian process regression and index-oriented adaptive differential evolution algorithm

Concentrate copper grade(CCG)is one of the important production indicators of copper flotation processes,and keeping the CCG at the set value is of great significance to the economic benefit of copper flotation industrial processes.This paper addresses the fluctuation problem of CCG through an operational optimization method.Firstly,a density-based affinity propagationalgorithm is proposed so that more ideal working condition categories can be obtained for the complex raw ore properties.Next,a Bayesian network(BN)is applied to explore the relationship between the operational variables and the CCG.Based on the analysis results of BN,a weighted Gaussian process regression model is constructed to predict the CCG that a higher prediction accuracy can be obtained.To ensure the predicted CCG is close to the set value with a smaller magnitude of the operation adjustments and a smaller uncertainty of the prediction results,an index-oriented adaptive differential evolution(IOADE)algorithm is proposed,and the convergence performance of IOADE is superior to the traditional differential evolution and adaptive differential evolution methods.Finally,the effectiveness and feasibility of the proposed methods are verified by the experiments on a copper flotation industrial process.

THE WEIGHTED KATO SQUARE ROOT PROBLEMOF ELLIPTIC OPERATORS HAVING A BMOANTI-SYMMETRICPART

Let n≥2 and let L be a second-order elliptic operator of divergence form with coefficients consisting of both an elliptic symmetric part and a BMO anti-symmetric part in ℝ^(n).In this article,we consider the weighted Kato square root problem for L.More precisely,we prove that the square root L^(1/2)satisfies the weighted L^(p)estimates||L^(1/2)(f)||L_(ω)^p(R^(n))≤C||■f||L_(ω)^p(R^(n);R^(n))for any p∈(1,∞)andω∈Ap(ℝ^(n))(the class of Muckenhoupt weights),and that||■f||L_(ω)^p(R^(n);R^(n))≤C||L^(1/2)(f)||L_(ω)^p(R^(n))for any p∈(1,2+ε)andω∈Ap(ℝ^(n))∩RH_(2+ε/p),(R^(n))(the class of reverse Hölder weights),whereε∈(0,∞)is a constant depending only on n and the operator L,and where(2+ε/p)'denotes the Hölder conjugate exponent of 2+ε/p.Moreover,for any given q∈(2,∞),we give a sufficient condition to obtain that||■f||L_(ω)^p(R^(n);R^(n))≤C||L^(1/2)(f)||L_(ω)^p(R^(n))for any p∈(1,q)andω∈A_(p)(R^(n))∩pRH_(q/p),(R^(n)).As an application,we prove that when the coefficient matrix A that appears in L satisfies the small BMO condition,the Riesz transform∇L^(−1/2)is bounded on L_(ω)^(p)(ℝ^(n))for any given p∈(1,∞)andω∈Ap(ℝ^(n)).Furthermore,applications to the weighted L^(2)-regularity problem with the Dirichlet or the Neumann boundary condition are also given.

Optimizing Average Electric Power During the Charging of Lithium-Ion Batteries Through the Taguchi Method

In recent times, lithium-ion batteries have been widely used owing to their high energy density, extended cycle lifespan, and minimal self-discharge rate. The design of high-speed rechargeable lithium-ion batteries faces a significant challenge owing to the need to increase average electric power during charging. This challenge results from the direct influence of the power level on the rate of chemical reactions occurring in the battery electrodes. In this study, the Taguchi optimization method was used to enhance the average electric power during the charging process of lithium-ion batteries. The Taguchi technique is a statistical strategy that facilitates the systematic and efficient evaluation of numerous experimental variables. The proposed method involved varying seven input factors, including positive electrode thickness, positive electrode material, positive electrode active material volume fraction, negative electrode active material volume fraction, separator thickness, positive current collector thickness, and negative current collector thickness. Three levels were assigned to each control factor to identify the optimal conditions and maximize the average electric power during charging. Moreover, a variance assessment analysis was conducted to validate the results obtained from the Taguchi analysis. The results revealed that the Taguchi method was an eff ective approach for optimizing the average electric power during the charging of lithium-ion batteries. This indicates that the positive electrode material, followed by the separator thickness and the negative electrode active material volume fraction, was key factors significantly infl uencing the average electric power during the charging of lithium-ion batteries response. The identification of optimal conditions resulted in the improved performance of lithium-ion batteries, extending their potential in various applications. Particularly, lithium-ion batteries with average electric power of 16 W and 17 W during charging were designed and simulated in the range of 0-12000 s using COMSOL Multiphysics software. This study efficiently employs the Taguchi optimization technique to develop lithium-ion batteries capable of storing a predetermined average electric power during the charging phase. Therefore, this method enables the battery to achieve complete charging within a specific timeframe tailored to a specificapplication. The implementation of this method can save costs, time, and materials compared with other alternative methods, such as the trial-and-error approach.

Average Secrecy Capacity of the Reconfigurable Intelligent Surface-Assisted Integrated Satellite Unmanned Aerial Vehicle Relay Networks

Integrated satellite unmanned aerial vehicle relay networks(ISUAVRNs)have become a prominent topic in recent years.This paper investigates the average secrecy capacity(ASC)for reconfigurable intelligent surface(RIS)-enabled ISUAVRNs.Especially,an eve is considered to intercept the legitimate information from the considered secrecy system.Besides,we get detailed expressions for the ASC of the regarded secrecy system with the aid of the reconfigurable intelligent.Furthermore,to gain insightful results of the major parameters on the ASC in high signalto-noise ratio regime,the approximate investigations are further gotten,which give an efficient method to value the secrecy analysis.At last,some representative computer results are obtained to prove the theoretical findings.

Indoor air quality risk assessment on the Canadian campus by a multilevel integrated weighted average method

Increasing incidents of indoor air quality(IAQ) related complaints lead us to the fact that IAQ has become a significant occupational health and environmental issue. However, how to effectively evaluate IAQ under different scale of multiple indicators is still a challenge. The traditional single-indicator method is subjected to uncertainties in assessing IAQ due to different subjectivity on good or bad quality and scalar differences of data set. In this study, a multilevel integrated weighted average IAQ method including initial walking through assessment(IWA) and two-layers weighted average method are developed and applied to evaluate IAQ of the laboratory building at the University of Regina in Canada. Some important chemical parameters related to IAQ in terms of volatile organic compounds(VOCs), methanol(HCHO), carbon dioxide(CO2), and carbon monoxide(CO) are evaluated based on 5 months continuous monitoring data. The new integrated assessment result can not only indicates the risk of an individual parameter, but also able to quantify the overall IAQ risk on the sampling site. Finally, some recommendations based on the result are proposed to address sustainable IAQ practices in the sampling area.

Exploration of the efficacy and mechanism of treating head wind disease with the combination change of ginger volatile oil and gingerol by using content-weighted network pharmacology technology

Background:Exploring the efficacy,potential components,and mechanism of the combination of ginger essential oil and gingerols in the treatment of head wind disease based on network pharmacology technology with content weight.Methods:The experimental groups were divided into:0:10,1:4,1:2,1:1,2:1,4:1,10:0.The relative content(Ri)of the chemical constituents of ginger's volatile oil was determined using gas chromatography-mass spectrometry(GC-MS).Additionally,the physicochemical and biological property parameters(LogP,MDCK,PPB,MW)of the components were considered.To assess the quantitative effect of the components,a grading score was performed,and the quantitative effect index(Ki)was calculated.Subsequently,the target effect index(Ti)was calculated by combining the component-target matching score(Fit score).Using these calculations,the target effect score A was determined under the influence of multiple components targeting different targets.Key targets with A≥1000 were identified.To predict the targets related to head wind disease,the Comparative Toxicogenomics Database(https://ctdbase.org/),Gene Cards(https://www.genecards.org/),and Disgenet database(https://www.disgenet.org/)were utilized.The key targets,obtained from different proportions of ginger's volatile oil and gingerol,were intersected with the predicted targets.This facilitated network pharmacological analysis and verification of the efficacy.Results:The content of volatile oil in ginger demonstrated an impact on key targets associated with the volatile oil group.Each specific combination of volatile oil consistently activated distinct pathways,with variations stemming from changes in content.Experimental testing revealed that different combinations of ginger's volatile oil and gingerol effectively alleviated migraine symptoms in rats.Conclusion:Through the application of content-weighted network pharmacology technology and pharmacodynamic verification,it was determined that altering the ratio between ginger's volatile oil and gingerol leads to variations in potential targets and pathways,consequently impacting its efficacy.

Analysis of the COVID-19, Outbreak in Brazil Using Topological Weighted Centroid: An Intelligent Geographic Information System Approach

This study used Topological Weighted Centroid (TWC) to analyze the Coronavirus outbreak in Brazil. This analysis only uses latitude and longitude in formation of the capitals with the confirmed cases on May 24, 2020 to illustrate the usefulness of TWC though any date could have been used. There are three types of TWC analyses, each type having five associated algorithms that produce fifteen maps, TWC-Original, TWC-Frequency and TWC-Windowing. We focus on TWC-Original to illustrate our approach. The TWC method without using the transportation information predicts the network for COVID-19 outbreak that matches very well with the main radial transportation routes network in Brazil.

The New Neutrosophic Double and Triple Exponentially Weighted Moving Average Control Charts

The concept of neutrosophic statistics is applied to propose two monitoring schemes which are an improvement of the neutrosophic exponentially weighted moving average(NEWMA)chart.In this study,two control charts are designed under the uncertain environment or neutrosophic statistical interval system,when all observations are undermined,imprecise or fuzzy.These are termed neutrosophic double and triple exponentially weighted moving average(NDEWMA and NTEWMA)control charts.For the proficiency of the proposed chart,Monte Carlo simulations are used to calculate the run-length characteristics(such as average run length(ARL),standard deviation of the run length(SDRL),percentiles(P_(25),P_(50),P_(75)))of the proposed charts.The structures of the proposed control charts are more effective in detecting small shifts while these are comparable with the other existing charts in detecting moderate and large shifts.The simulation study and real-life implementations of the proposed charts show that the proposed NDEWMA and NTEWMA charts perform better in monitoring the process of road traffic crashes and electric engineering data as compared to the existing control charts.Therefore,the proposed charts will be helpful in minimizing the road accident and minimizing the defective products.Furthermore,the proposed charts are more acceptable and actual to apply in uncertain environment.

Exploration of regional surface average heat flow from meteorological and geothermal series

We attempt to compute the Surface Average Heat Flow （SAHF） from long-term temperature observations of one hundred seventy-seven observational points at the depths of 0.8, 1.6, and 3.2 m, which were relatively evenly distributed in China's Mainland. We first employ Fourier transformation to remove the influence of atmospheric temperature variations from the observation series, which are classified into the type of the steady-state temperature monotonously increasing with depth （type I） and other three types. Then we compare our results obtained from the data of type I, of which the values are thought to equal to those of the mean borehole heat flow, with those obtained from traditional heat flow observations mainly distributed in North China Craton. In computations of the SAHF at the observation stations, we deduce the thermal diffusivity and volumetric specific heat of the soil by employing harmonic solutions of the heat conduction equation for the same moisture group as the first step, and then we determine the SAHF using Fourier＇s law. Our results indicate that the SAHF derived from shallow earth geothermal data can reflect the heat flow field to a large extent.

The Application of Weighted Association Rules in Host-Based Intrusion Detection System

Association rules are useful for determining correlations between items. Applying association rules to intrusion detection system (IDS) can improve the detection rate, but false positive rate is also increased. Weighted association rules are used in this paper to mine intrustion models, which can increase the detection rate and decrease the false positive rate by some extent. Based on this, the structure of host-based IDS using weighted association rules is proposed.

The Interpolation of Operators between Weighted Hardy Spaces and Weighted L^p Spaces

The paper is given the interpolation of operators between weighted Hardy spaces and weighted L p spaces when w∈A 1 by Calderon Zygmund decomposition.

Exploration of the spatial pattern of urban residential land use with geographically weighted regression technique: a case study of Nanjing,China

As the traditional methods and technical means cannot meet the quantitative research needs of the urban land use patterns, quantitative research methods for the urban land use pattern are established via the GIS （geographic information system ） technique combined with the related theories and models. Taking the city of Nanjing as an example, a spatial database of urban land use and other environmental and socio-economic data is constructed. A multiple linear regression model is developed to determine the statistically significant factors affecting the residential land use distributions. To explain the spatial variations of urban land use patterns, the geographically weighted regression （GWR） is employed to establish spatial associations between these significant factors and the distribution of urban residential land use. The results demonstrate that the GWR can provide an effective approach to the exploration of the urban land use spatial patterns and also provide useful spatial information for planning residential development and other types of urban land use.

CONVERGENCE OF WEIGHTED AVERAGES OF MARTINGALES IN NONCOMMUTATIVE BANACH FUNCTION SPACES

Let x （xn）≥1 be a martingale on a noncommutative probability space n （M, r） and （wn）n≥1 a sequence of positive numbers such that Wn = ∑ k=1^n wk →∞ as n →∞ We prove that x = （x.）n≥1 converges in E（M） if and only if （σn（x）n≥1 converges in E（.hd）, where E（A//） is a noncommutative rearrangement invariant Banach function space with the Fatou property and σn（x） is given by σn（x） = 1/Wn ∑k=1^n wkxk, n=1, 2, .If in addition, E（Ad） has absolutely continuous norm, then, （an（x））≥1 converges in E（.M） if and only if x = （Xn）n≥1 is uniformly integrable and its limit in measure topology x∞∈ E（M）.

Weighted average consensus problem in networks of agents with diverse time-delays

This paper studies the weighted average consensus problem for networks of agents with fixed directed asymmetric unbalance information exchange topology. We suppose that the classical distributed consensus protocol is destroyed by diverse time-delays which include communication time-delay and self time-delay. Based on the generalized Nyquist stability criterion and the Gerschgorin disk theorem, some sufficient conditions for the consensus of multi-agent systems are obtained. And we give the expression of the weighted average consensus value for our consensus protocol. Finally, numerical examples are presented to illustrate the theoretical results.