Book Review “Fabrikant,V.I.Contact and Crack Problems in Linear Theory of Elasticity,Bentham Science Publishers,Sharjah,UAE(2010)”

As suggested by the title, this extensive book is concerned with crack and contact prob- lems in linear elasticity. However, in general, it is intended for a wide audience ranging from engineers to mathematical physicists. Indeed, numerous problems of both academic and tech- nological interest in electro-magnetics, acoustics, solid and fluid dynamics, etc. are actually related to each other and governed by the same mixed boundary value problems from a unified mathematical standpoint

RESEARCH ON A SYSTEMATIC METHODOLOGY FOR THEORY OF ELASTICITY

The equivalence between differential form and integral form of a systematic methodology for theory of elasticity is proved. A uniform framework of the systematic methodology is established. New system includes differential form, integral form and mixed form. All kinds of variational principle are proved by the equivalence between differential form and integral form. The idea for generalized virtual work and virtual function is presented.

Some New Results from the Electron Theory on the Elastical of Alkahoe Earth Metals and Rare Earth Elements

With the introduction of Poisson's ratio in the expression of Young's modulus,nearly all the theoretical values of the various elastic moduli for the alkaline earth metals and rare earth elements can be greatly refined, with the single exception of the theoreticalvalue of Young's modulus for Pr which is slightly increased This points to the validityof the new theory, that the bulk modulus is independent of the Poisson's ratio, and further that the valency electron structures of solids as determined by Yu's theory are correct.

Preliminary Report on the Theory of Elastic Circular Plate with no Kirchhoff-Love Assumptions

In this paper, the theory of elastic circular plate with no classical Kirchhoff-Love assumptions is established on the basis of a previous paper. In this theory, no classical Kirchhoff-Love assumptions are pre-assumed and the axial symmetrical analytic solution of fixed circular plate under the action of uniform pressure is obtained. Comparison of this solution and the known classical solution shows that this new solution agrees better than classical solution with the experiment measurement.This gives also the quantitative effect of the thickness on the deflection of circular plate with moderate thickness.

Mechanical Properties of Graphene within the Framework of Gradient Theory of Adhesion

The gradient model of two-dimensional defectless medium is formulated. A graphene sheet is examined as an example of such two-dimensional medium. The problem statement of a graphene sheet deforming in its plane and the bending problem are examined. It is ascertained that the statement of the first problem is equivalent to the flat problem statement of Toupin gradient theory. The statement of the bending problem is equivalent to the plate bending theory of Timoshenko with certain reserves. The characteristic feature of both statements is the fact that the mechanical properties of the sheet of graphene are not defined by “volumetric” moduli but by adhesive ones which have different physical dimension that coincides with the dimension of the corresponding stiffness of classical and nonclassical plates.

Size-dependent shear buckling response of FGM skew nanoplates modeled via different homogenization schemes

The size effects on the shear buckling behaviors of skew nanoplates made of functionally graded materials(FGMs)are presented.The material properties are supposed to be changed uniformly from the ceramic phase to the metal one along the plate thickness.To estimate the associated effective material properties,various homogenization schemes including the Reuss model,the Voigt model,the Mori-Tanaka model,and the Hashin-Shtrikman bound model are used.The nonlocal elasticity theory together with the oblique coordinate system is applied to the higher-order shear deformation plate theory to develop a size-dependent plate model for the shear buckling analysis of FGM skew nanoplates.The Ritz method using Gram-Schmidt shape functions is used to solve the size-dependent problem.It is found that the significance of the nonlocality in the reduction of the shear buckling load of an FGM skew nanoplate increases for a higher value of the material property gradient index.Also,by increasing the skew angle,the critical shear buckling load of an FGM skew nanoplate enhances.This pattern becomes a bit less significant for a higher value of the material property gradient index.Furthermore,among various homogenization models,the Voigt and Reuss models in order estimate the overestimated and underestimated shear buckling loads,and the difference between them reduces by increasing the aspect ratio of the skew nanoplate.

Dynamic Design of Thick Orthotropic Cantilever Plates with Consideration of Bimoments

The paper is devoted to dynamic design of thick orthotropic cantilever plates by applying the bimoment theory of plates, which takes into account the forces, moments and bimoments;and the theory takes into account nonlinear law of displacements distribution in cross section of the plate. The methods for constructing bimoment theory are based on Hooke’s Law, three-dimensional equations of the theory of dynamic elasticity and the method of displacements expansion into Maclaurin series. The article gives the expressions to determine the forces, moments and bimoments. Bimoment theory of plates is described by two unrelated two-dimensional systems with nine equations in each. On each edge of the plate, depending on the type of fastening, nine boundary conditions are given. As an example, the solution of the problem of dynamic bending of thick isotropic and orthotropic plate under the influence of transverse dynamic loads in the form of the Heaviside function is given. The equations of motion of the plate are solved by numerical method of finite differences. The numerical results are obtained for isotropic and orthotropic plate. The graphs of changes of displacements and stresses of faces surfaces of the plate are presented. Maximum values of these displacements are found and analyzed. It is shown that by Timoshenko theory numerical values of stresses are much smaller compared to the ones obtained by bimoment theory of plates. Maximum numerical values of generalized displacements, forces, moments, and bimoments are obtained and presented in tabular form. The analysis of numerical results is done and the conclusions are drawn.

HAMILTONIAN SYSTEM AND SIMPLETIC GEOMETRY IN MECHANICS OF COMPOSITE MATERIALS (Ⅱ)——PLANE STRESS PROBLEM

Fundamental theory presented in Part (I)[8] is used to analyze anisotropic plane stress problems. First we construct the generalized variational principle to enter Hamiltonian system and get Hamiltonian differential operator matrix; then we solve eigen problem; finally, we present the process of obtaining analytical solutions and semi-analytical solutions for anisotropic plane stress porblems on rectangular area.

THE EXACT SOLUTION OF STRESS DISTRIBUTION IN FILLET WELDS

The exact solution of stress distribution in fillet welds under the action of bending moment M is presented in this paper. Together with the exact solution of stress distribution in fillet welds under the action of concentrated force P given in an earlier paper([1]), designers of weldments can improve their work on the foundation of exact analytical solutions.

Computation model of proppant embedment depth based on dimensional analysis

Hydraulic fracturing is designed to form a high-conductivity fracture. The proppant will embed into the formation rock, especially in soft rock, owing to the interaction between proppant and fracture surface after fracture closure. Proppant embedment would reduce the fracture width and then lower the fracture conductivity. According to dimensional analysis, the rock is assumed to be an elastic material. Using the theory of elasticity to describe the stage of elastic deformation and analysis of the corresponding simplified embedding process, the study establish the static computation model of the two-dimensional infinite half plane and three-dimensional infinite half space model of the proppant embedment. According to laboratory results, the calculation model was modified, got an effective correction factor and analyzed the causes of errors, then discussed the factors which have impact on proppant embedment. The result calculated by the model in this paper can be reference of prop- pant optimization in on-site fracturing for a certainty degree.

Notions of resilience and qualitative evaluation of tsunami resiliency using the theory of springs

This study revisits the concept of resilience by critically reviewing the contents of previous literature. Furthermore, it explains a new methodology for measuring resilience based on the theory of springs and qualitatively appraises the resiliency of Minamisanriku town as a case study. Minamisanriku is a tiny coastal town located in the northeastern part of the Miyagi Prefecture, Japan. The town was affected by an earthquake on March 11, 2011, with a magnitude of 9.0, followed by a tsunami. According to the authors’ previously proposed conceptual framework, resilience should be considered by dividing it into three components: onsite capacity, instantaneous survivability, and the recovery potentiality of an area. Each component of the framework depends on two or three factors that can be measured using different indicators and sub-indicators. Onsite capacity is the ability of a given place to withstand a tsunami before it arrives, and it has been considered indispensable for the prevention of a tsunami. Instantaneous survivability is the power to be alive at the point of a disaster climax. Returning speed to its normal daily routines once a catastrophe is over is called recovery potentiality. It is understood that strengthening onsite capacity by moving residences to higher ground, building seawalls and paved roads, relocation of fishing industry infrastructure, and land elevation in Minamisanriku town makes it a benchmark for resilient cities.

A Quadrature Approach for N-Collinear Crack Problem in an Orthotropic Strip

This study presents the determination of the stress intensity factors （SIFs） at the edges of the cracks in an elastic strip weakened by N-collinear cracks. The problem of an orthotropic elastic strip is reduced to a system of Cauchy type singular integral equations. The system of singular integral equations is approached by a Quadrature technique. Under two different loading conditions, the results are obtained for the different cases of crack numbers. The resistance of the strip is examined by considering the orthotropic properties of the strip material. Finally, the crack interactions are clarified during the analysis.

A THREE-DIMENSIONAL ELASTICITY SOLUTION FOR TWO-DIRECTIONAL FGM ANNULAR PLATES WITH NON-UNIFORM ELASTIC FOUNDATIONS SUBJECTED TO NORMAL AND SHEAR TRACTIONS

In the present paper, bending and stress analyses of two-directional functionally graded （FG） annular plates resting on non-uniform two-parameter Winkler-Pasternak founda- tions and subjected to normal and in-plane-shear tractions is investigated using the exact three- dimensional theory of elasticity. Neither the in-plane shear loading nor the influence of the two- directional material heterogeneity has been investigated by the researchers before. The solution is obtained by employing the state space and differential quadrature methods. The material proper- ties are assumed to vary in both transverse and radial directions. Three different types of variations of the stiffness of the foundation are considered in the radial direction： linear, parabolic, and sinu- soidal. The convergence analysis and the comparative studies demonstrate the high accuracy and high convergence rate of the present approach. A parametric study consisting of evaluating effects of different parameters （e.g., exponents of the material properties laws, the thickness to radius ratio, trends of variations of the foundation stiffness, and different edge conditions） is carried out. The results are reported for the first time and are discussed in detail.