Thin-walled cylindrical workpiece is easy to deform during machining and clamping processes due to the insufficient rigidi.Moreover,it’s also difficult to ensure the perpendicularity of flange holes during drilling p...Thin-walled cylindrical workpiece is easy to deform during machining and clamping processes due to the insufficient rigidi.Moreover,it’s also difficult to ensure the perpendicularity of flange holes during drilling process.In this paper,the element birth and death technique is used to obtain the axial deformation of the hole through finite element simulation.The measured value of the perpendicularity of the hole was compared with the simulated value to verify then the rationality of the simulation model.To reduce the perpendicularity error of the hole in the drilling process,the theory of inventive principle solution(TRIZ)was used to analyze the drilling process of thin-walled cylinder,and the corresponding fixture was developed to adjust the supporting surface height adaptively.Three different fixture supporting layout schemes were used for numerical simulation of drilling process,and the maximum,average and standard deviation of the axial deformation of the flange holes and their maximum hole perpendicularity errors were comparatively analyzed,and the optimal arrangement was optimized.The results show that the proposed deformation control strategy can effectively improve the drilling deformation of thin-walled cylindrical workpiece,thereby significantly improving the machining quality of the parts.展开更多
Recently application of functionally graded materials(FGMs) have attracted a great deal of interest. These materials are composed of various materials with different micro-structures which can vary spatially in FGMs...Recently application of functionally graded materials(FGMs) have attracted a great deal of interest. These materials are composed of various materials with different micro-structures which can vary spatially in FGMs. Such composites with varying thickness and non-uniform pressure can be used in the aerospace engineering. Therefore, analysis of such composite is of high importance in engineering problems. Thermoelastic analysis of functionally graded cylinder with variable thickness under non-uniform pressure is considered. First order shear deformation theory and total potential energy approach is applied to obtain the governing equations of non-homogeneous cylinder. Considering the inner and outer solutions, perturbation series are applied to solve the governing equations. Outer solution for out of boundaries and more sensitive variable in inner solution at the boundaries are considered. Combining of inner and outer solution for near and far points from boundaries leads to high accurate displacement field distribution. The main aim of this paper is to show the capability of matched asymptotic solution for different non-homogeneous cylinders with different shapes and different non-uniform pressures. The results can be used to design the optimum thickness of the cylinder and also some properties such as high temperature residence by applying non-homogeneous material.展开更多
The present paper deals with thermoelastic problems of finitely long hollow cylinder com-posed of two different materials with axial sym- metry. The medium is traction-free, with neglig-ible body forces and with inter...The present paper deals with thermoelastic problems of finitely long hollow cylinder com-posed of two different materials with axial sym- metry. The medium is traction-free, with neglig-ible body forces and with internal and external heat generations. The governing equations for different theories of the generalized thermoe-lasticity are written in terms of displacement and temperature increment. The exact solution of the problem;using different theories of generalized thermoelasticity;has been deduced. The analytical expressions for displacements, temperature and stresses are found in final forms, and a numerical example has been taken to discuss the effect of the relaxation times. Finally, the results have been illustrated graphi- cally to find the responses of different theories.展开更多
This study investigates the hydro-elastic behaviors of fully submerged horizontal cylinders in different regular waves.Two methods were proposed and compared in this study.The first method was based on potential theor...This study investigates the hydro-elastic behaviors of fully submerged horizontal cylinders in different regular waves.Two methods were proposed and compared in this study.The first method was based on potential theory in frequency domain and the discrete-module-beam(DMB)method,which discretizes a floating elastic structure into a sufficient number of rigid bodies while simultaneously representing the elastic behavior from beam elements with Euler-Bernoulli beam and Saint-Venant torsion.Moreover,the Morison method in time domain was employed;this method estimates wave forces from the semi-empirical Morison equation,and the elastic behavior is embodied by massless axial,bending,and torsional springs.Various parametric studies on cylinder diameter,submergence depth,and wave direction were conducted.Wave forces,dry/wet mode shapes/natural frequencies,and dynamic motions are presented and analyzed.展开更多
Until now, most researches into the rogue-wave-structure interaction have relied on experimental measurement and numerical simulation. Owing to the complexity of the physical mechanism of rogue waves, theoretical stud...Until now, most researches into the rogue-wave-structure interaction have relied on experimental measurement and numerical simulation. Owing to the complexity of the physical mechanism of rogue waves, theoretical study on the wave-structure issue still makes little progress. In this paper, the rogue wave flow around a vertical cylinder is analytically studied within the scope of the potential theory. The rogue wave is modeled by the Gauss envelope, which is one particular case of the well-known focusing theory. The formulae of the wave-induced horizontal force and bending moment are proposed. For the convenience of engineering application, the derived formulae are simplified appropriately, and verified against numerical results. In addition, the influence of wave parameters, such as the energy focusing degree and the wave focusing position, is thoroughly investigated.展开更多
Owing to the complexity of the physical mechanisms of rouge waves,the theoretical study of the rogue-wavestructure interaction problems still makes little progress.However,for regular-shaped structures,it is possible ...Owing to the complexity of the physical mechanisms of rouge waves,the theoretical study of the rogue-wavestructure interaction problems still makes little progress.However,for regular-shaped structures,it is possible to give a theoretical analysis,if a relatively simple model of the rogue waves is used.The wave load,induced by a focusing wave which is known as an intuitive basic model of the rouge waves,upon a semi-submerged cylinder is studied analytically.The focusing wave is approximate by the Gauss envelope wave,an ideal model which contains most features of the rogue wave.The diffraction velocity potential is derived through the separation of flow field,and the formulas of the horizontal force and bending moment are proposed.The derived formulas are simplified appropriately,and validated through comparison against numerical results.In addition,the influence of parameters,such as the focusing degree,the submerging depth and the wave focusing position,is thoroughly investigated.展开更多
The analysis of the data of model tests of two large deep wharves and monographic experimental studies show that two aspects are to be improved so as to predict the wave uplift forces on the bottom of a circular cylin...The analysis of the data of model tests of two large deep wharves and monographic experimental studies show that two aspects are to be improved so as to predict the wave uplift forces on the bottom of a circular cylinder. The first aspect is the uplift pressure distribution on the bottom, and the second is the correct determination of the phase for maximum horizontal wave forces. The second problem has been solved. Synthesizing the results of theoretical analysis and experiments, we suggest a diagram for the determination of the phase when the maximum horizontal wave force appears. On the basis-ef the diagram the simultaneous wave uplift forces can be obtained for the structural stability analysis.展开更多
In the structural design of the high pier,in order to analyze the strength and structure stability,the pier was often considered a thin-walled structure.Elastoplastic incremental theory was used to establish the model...In the structural design of the high pier,in order to analyze the strength and structure stability,the pier was often considered a thin-walled structure.Elastoplastic incremental theory was used to establish the model of elastoplastic stability of high pier.By considering the combined action of pile,soil and pier together,the destabilization bearing capacity was calculated by using 3-D finite element method(3-D FEM) for piers with different pile and section height.Meanwhile,the equivalent stress in different sections of pier was computed and the processor of destabilization was discussed.When the pier is lower,the bearing capacity under mutual effect of pile,soil and pier is less than the situation when mutual effect is not considered;when the pier is higher,their differences are not conspicuous.Along with the increase of the cross-sectional height,the direction of destabilization bearing capacity is varied and the ultimate capacity is buildup.The results of a stability analysis example are almost identical with the practice.展开更多
A can0nical problem is investigated for high frequency electromagnetic radiation from amonopo1e on a conducting cylinder with c0ating-At first, the exact solution of this problem is given interms of Dyadic Green's...A can0nical problem is investigated for high frequency electromagnetic radiation from amonopo1e on a conducting cylinder with c0ating-At first, the exact solution of this problem is given interms of Dyadic Green's function method. Then, using Watson transformation and high frequency asymptotic approximate technique to the exact soluton, a UTD soultion is obtained. The radiation field excitedby a monopole is expressed in terms of the compound Fock' S functions (CFF), which reduce to the geomertrical optics result in the deep lit region and the creeping waves in the shadow region.展开更多
A dynamic Bayesian error function of material constants of the structure is developed for thin-walled curve box girders. Combined with the automatic search scheme with an optimal step length for the one-dimensional Fi...A dynamic Bayesian error function of material constants of the structure is developed for thin-walled curve box girders. Combined with the automatic search scheme with an optimal step length for the one-dimensional Fibonacci series, Powell's optimization theory is used to perform the stochastic identification of material constants of the thin-walled curve box. Then, the steps in the parameter identification are presented. Powell's identification procedure for material constants of the thin-walled curve box is compiled, in which the mechanical analysis of the thin-walled curve box is completed based on the finite curve strip element (FCSE) method. Some classical examples show that Powell's identification is numerically stable and convergent, indicating that the present method and the compiled procedure are correct and reliable. During the parameter iterative processes, Powell's theory is irrelevant with the calculation of the FCSE partial differentiation, which proves the high computation efficiency of the studied methods. The stochastic performances of the system parameters and responses axe simultaneously considered in the dynamic Bayesian error function. The one-dimensional optimization problem of the optimal step length is solved by adopting the Fibonacci series search method without the need of determining the region, in which the optimized step length lies.展开更多
Large-scale interceptors constitute the main structure of offshore self-driven floating marine litter collection devices,and the structural stability of such interceptors under the action of waves directly influences ...Large-scale interceptors constitute the main structure of offshore self-driven floating marine litter collection devices,and the structural stability of such interceptors under the action of waves directly influences the overall safety of the device.When the ratio of the diameter of a horizontal cylinder in such interceptors to the incident wavelength is larger than 0.25,the wave force can be calculated by using the diffraction theory,by considering the problem as that of the interaction between the waves and a partially immersed large-scale horizontal cylinder.In this study,an analytical approach to calculate the wave force on a partially immersed large-scale horizontal cylinder was formulated by using the stepwise approximation method.Physical model tests were conducted to investigate the effects of different factors(wave height,period,and immersion depth)on the wave force on a large-scale horizontal cylinder under conditions involving short-period waves.The results show that both horizontal and vertical wave forces on the cylinder increase as the wave height(immersion depth)increases in most cases.The vertical wave force decreases with the decrease of the period.For the horizontal wave force,it increases with the decrease of the period when the wavelength is larger than the diameter of the cylinder and decreases with the decrease of the period when the wavelength is smaller than the diameter of the cylinder.展开更多
In this paper, the measurement of an aerodynamic sound source for a semi-circular cylinder in a uniform flow is described using Particle Image Velocimetry (PIV). This experimental technique is based on vortex sound th...In this paper, the measurement of an aerodynamic sound source for a semi-circular cylinder in a uniform flow is described using Particle Image Velocimetry (PIV). This experimental technique is based on vortex sound theory, where the time derivative of vorticity is evaluated with the aid of two sets of standard PIV systems. The experimental results indicate that the sound source for the semi-circular cylinder is located around the shear layer near the edge of the semi-circular cylinder. The sound source intensity and the area are reduced in the semi-circular cylinder compared with those of a circular cylinder. This result indicates that the aerodynamic sound of the semi- circular cylinder is smaller than that of the circular cylinder, which supports the microphone measurement result.展开更多
A flow of silicon fluid in the gap between eccentric cylinders was studied experimentally.The condition of gaseous cavitation inception during the rotation of internal cylinder was considered.It was shown that at redu...A flow of silicon fluid in the gap between eccentric cylinders was studied experimentally.The condition of gaseous cavitation inception during the rotation of internal cylinder was considered.It was shown that at reduction of the gap between cylinders Saffman–Taylor instability appeared on surface of the internal cylinder and then gaseous cavitation was observed.Possibility of one uniform gas formation appearance under this type of instability was demonstrated.展开更多
Understanding the dynamic response of composite material cartridges during the firing process is of great significance for improving their reliability and safety.A theoretical model describing the dynamic response of ...Understanding the dynamic response of composite material cartridges during the firing process is of great significance for improving their reliability and safety.A theoretical model describing the dynamic response of composite material cartridges is established based on the thick-walled cylinder theory and rate-dependent constitutive model of composite materials.The correctness of the theoretical model is validated through finite element simulations of cartridge deformation.The influence of chamber pressure and cartridge wall thickness on the cartridge's deformation process and stress distribution is analyzed.The results indicate that the primary deformation of composite material cartridges inside the chamber is elastic deformation.Compared to metal cartridges,composite material cartridges require higher pressure for touching-chamber and are more prone to developing gaps after unloading to ensure smooth extraction.During the deformation process,the touching-chamber behavior of the cartridge can improve the stress distribution.Under the same chamber pressure,the touching-chamber behavior can reduce the circumferential stress by approximately 30%.The inner wall surface of the cartridge is a critical area that requires attention.The touching-chamber behavior can be facilitated by appropriately reducing the cartridge wall thickness while ensuring overall strength.This study can provide guidance for the optimization design of composite material cartridges.展开更多
Titanium alloys are widely used in the aviation and aerospace industries due to their unique mechanical and physical properties.Specifically,thin-walled titanium(Ti)cylinders have received increasing attention for the...Titanium alloys are widely used in the aviation and aerospace industries due to their unique mechanical and physical properties.Specifically,thin-walled titanium(Ti)cylinders have received increasing attention for their applications as rocket engine casings,aircraft landing gear,and aero-engine hollow shaft due to their observed improvement in the thrust-to-weight ratio.However,the conventional cutting(CC)process is not appropriate for thin-walled Ti cylinders due to its low thermal conductivity,high strength,and low stiffness.Instead,high-speed ultrasonic vibration cutting(HUVC)assisted processing has recently proved highly effective for Ti-alloy machining.In this study,HUVC technology is employed to perform external turning of a thinwalled Ti cylinder,which represents a new application of HUVC.First,the kinematics,tool path,and dynamic cutting thickness of HUVC are evaluated.Second,the phenomenon of mode-coupling chatter is analyzed to determine the effects and mechanism of HUVC by establishing a critical cutting thickness model.HUVC can increase the critical cutting thickness and effectively reduce the average cutting force,thus reducing the energy intake of the system.Finally,comparison experiments are conducted between HUVC and CC processes.The results indicate that the diameter error rate is 10%or less for HUVC and 51%for the CC method due to a 40%reduction in the cutting force.In addition,higher machining precision and better surface roughness are achieved during thin-walled Ti cylinder manufacturing using HUVC.展开更多
The accurate estimation of parameters is the premise for establishing a high-fidelity simulation model of a valve-controlled cylinder system.Bench test data are easily obtained,but it is challenging to emulate actual ...The accurate estimation of parameters is the premise for establishing a high-fidelity simulation model of a valve-controlled cylinder system.Bench test data are easily obtained,but it is challenging to emulate actual loads in the research on parameter estimation of valve-controlled cylinder system.Despite the actual load information contained in the operating data of the control valve,its acquisition remains challenging.This paper proposes a method that fuses bench test and operating data for parameter estimation to address the aforementioned problems.The proposed method is based on Bayesian theory,and its core is a pool fusion of prior information from bench test and operating data.Firstly,a system model is established,and the parameters in the model are analysed.Secondly,the bench and operating data of the system are collected.Then,the model parameters and weight coefficients are estimated using the data fusion method.Finally,the estimated effects of the data fusion method,Bayesian method,and particle swarm optimisation(PSO)algorithm on system model parameters are compared.The research shows that the weight coefficient represents the contribution of different prior information to the parameter estimation result.The effect of parameter estimation based on the data fusion method is better than that of the Bayesian method and the PSO algorithm.Increasing load complexity leads to a decrease in model accuracy,highlighting the crucial role of the data fusion method in parameter estimation studies.展开更多
文摘Thin-walled cylindrical workpiece is easy to deform during machining and clamping processes due to the insufficient rigidi.Moreover,it’s also difficult to ensure the perpendicularity of flange holes during drilling process.In this paper,the element birth and death technique is used to obtain the axial deformation of the hole through finite element simulation.The measured value of the perpendicularity of the hole was compared with the simulated value to verify then the rationality of the simulation model.To reduce the perpendicularity error of the hole in the drilling process,the theory of inventive principle solution(TRIZ)was used to analyze the drilling process of thin-walled cylinder,and the corresponding fixture was developed to adjust the supporting surface height adaptively.Three different fixture supporting layout schemes were used for numerical simulation of drilling process,and the maximum,average and standard deviation of the axial deformation of the flange holes and their maximum hole perpendicularity errors were comparatively analyzed,and the optimal arrangement was optimized.The results show that the proposed deformation control strategy can effectively improve the drilling deformation of thin-walled cylindrical workpiece,thereby significantly improving the machining quality of the parts.
文摘Recently application of functionally graded materials(FGMs) have attracted a great deal of interest. These materials are composed of various materials with different micro-structures which can vary spatially in FGMs. Such composites with varying thickness and non-uniform pressure can be used in the aerospace engineering. Therefore, analysis of such composite is of high importance in engineering problems. Thermoelastic analysis of functionally graded cylinder with variable thickness under non-uniform pressure is considered. First order shear deformation theory and total potential energy approach is applied to obtain the governing equations of non-homogeneous cylinder. Considering the inner and outer solutions, perturbation series are applied to solve the governing equations. Outer solution for out of boundaries and more sensitive variable in inner solution at the boundaries are considered. Combining of inner and outer solution for near and far points from boundaries leads to high accurate displacement field distribution. The main aim of this paper is to show the capability of matched asymptotic solution for different non-homogeneous cylinders with different shapes and different non-uniform pressures. The results can be used to design the optimum thickness of the cylinder and also some properties such as high temperature residence by applying non-homogeneous material.
文摘The present paper deals with thermoelastic problems of finitely long hollow cylinder com-posed of two different materials with axial sym- metry. The medium is traction-free, with neglig-ible body forces and with internal and external heat generations. The governing equations for different theories of the generalized thermoe-lasticity are written in terms of displacement and temperature increment. The exact solution of the problem;using different theories of generalized thermoelasticity;has been deduced. The analytical expressions for displacements, temperature and stresses are found in final forms, and a numerical example has been taken to discuss the effect of the relaxation times. Finally, the results have been illustrated graphi- cally to find the responses of different theories.
文摘This study investigates the hydro-elastic behaviors of fully submerged horizontal cylinders in different regular waves.Two methods were proposed and compared in this study.The first method was based on potential theory in frequency domain and the discrete-module-beam(DMB)method,which discretizes a floating elastic structure into a sufficient number of rigid bodies while simultaneously representing the elastic behavior from beam elements with Euler-Bernoulli beam and Saint-Venant torsion.Moreover,the Morison method in time domain was employed;this method estimates wave forces from the semi-empirical Morison equation,and the elastic behavior is embodied by massless axial,bending,and torsional springs.Various parametric studies on cylinder diameter,submergence depth,and wave direction were conducted.Wave forces,dry/wet mode shapes/natural frequencies,and dynamic motions are presented and analyzed.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51579146,51490674,and51609101)the Shanghai Rising-Star Program(Grant No.16QA1402300)
文摘Until now, most researches into the rogue-wave-structure interaction have relied on experimental measurement and numerical simulation. Owing to the complexity of the physical mechanism of rogue waves, theoretical study on the wave-structure issue still makes little progress. In this paper, the rogue wave flow around a vertical cylinder is analytically studied within the scope of the potential theory. The rogue wave is modeled by the Gauss envelope, which is one particular case of the well-known focusing theory. The formulae of the wave-induced horizontal force and bending moment are proposed. For the convenience of engineering application, the derived formulae are simplified appropriately, and verified against numerical results. In addition, the influence of wave parameters, such as the energy focusing degree and the wave focusing position, is thoroughly investigated.
基金The National Natural Science Foundation of China under contract No.51609101the Natural Science Foundation of Fujian Province of China under contract Nos 2017J01701 and 2017J05085
文摘Owing to the complexity of the physical mechanisms of rouge waves,the theoretical study of the rogue-wavestructure interaction problems still makes little progress.However,for regular-shaped structures,it is possible to give a theoretical analysis,if a relatively simple model of the rogue waves is used.The wave load,induced by a focusing wave which is known as an intuitive basic model of the rouge waves,upon a semi-submerged cylinder is studied analytically.The focusing wave is approximate by the Gauss envelope wave,an ideal model which contains most features of the rogue wave.The diffraction velocity potential is derived through the separation of flow field,and the formulas of the horizontal force and bending moment are proposed.The derived formulas are simplified appropriately,and validated through comparison against numerical results.In addition,the influence of parameters,such as the focusing degree,the submerging depth and the wave focusing position,is thoroughly investigated.
文摘The analysis of the data of model tests of two large deep wharves and monographic experimental studies show that two aspects are to be improved so as to predict the wave uplift forces on the bottom of a circular cylinder. The first aspect is the uplift pressure distribution on the bottom, and the second is the correct determination of the phase for maximum horizontal wave forces. The second problem has been solved. Synthesizing the results of theoretical analysis and experiments, we suggest a diagram for the determination of the phase when the maximum horizontal wave force appears. On the basis-ef the diagram the simultaneous wave uplift forces can be obtained for the structural stability analysis.
基金Project(06JJ5080) supported by the Hunan Natural Science Foundation of ChinaProject(05026B) supported by the Young Science Foundation of Central South University of Forestry and Technology
文摘In the structural design of the high pier,in order to analyze the strength and structure stability,the pier was often considered a thin-walled structure.Elastoplastic incremental theory was used to establish the model of elastoplastic stability of high pier.By considering the combined action of pile,soil and pier together,the destabilization bearing capacity was calculated by using 3-D finite element method(3-D FEM) for piers with different pile and section height.Meanwhile,the equivalent stress in different sections of pier was computed and the processor of destabilization was discussed.When the pier is lower,the bearing capacity under mutual effect of pile,soil and pier is less than the situation when mutual effect is not considered;when the pier is higher,their differences are not conspicuous.Along with the increase of the cross-sectional height,the direction of destabilization bearing capacity is varied and the ultimate capacity is buildup.The results of a stability analysis example are almost identical with the practice.
文摘A can0nical problem is investigated for high frequency electromagnetic radiation from amonopo1e on a conducting cylinder with c0ating-At first, the exact solution of this problem is given interms of Dyadic Green's function method. Then, using Watson transformation and high frequency asymptotic approximate technique to the exact soluton, a UTD soultion is obtained. The radiation field excitedby a monopole is expressed in terms of the compound Fock' S functions (CFF), which reduce to the geomertrical optics result in the deep lit region and the creeping waves in the shadow region.
基金Project supported by the National Natural Science Foundation of China(Nos.10472045,10772078, and 11072108)the National High-Tech Research and Development Program of China(863 Program) (No.2007AA11Z106)
文摘A dynamic Bayesian error function of material constants of the structure is developed for thin-walled curve box girders. Combined with the automatic search scheme with an optimal step length for the one-dimensional Fibonacci series, Powell's optimization theory is used to perform the stochastic identification of material constants of the thin-walled curve box. Then, the steps in the parameter identification are presented. Powell's identification procedure for material constants of the thin-walled curve box is compiled, in which the mechanical analysis of the thin-walled curve box is completed based on the finite curve strip element (FCSE) method. Some classical examples show that Powell's identification is numerically stable and convergent, indicating that the present method and the compiled procedure are correct and reliable. During the parameter iterative processes, Powell's theory is irrelevant with the calculation of the FCSE partial differentiation, which proves the high computation efficiency of the studied methods. The stochastic performances of the system parameters and responses axe simultaneously considered in the dynamic Bayesian error function. The one-dimensional optimization problem of the optimal step length is solved by adopting the Fibonacci series search method without the need of determining the region, in which the optimized step length lies.
基金This work was financially supported by the Marine Economic Development Subsidy Fund Project in Fujian Province of China(Grant No.FJHJF-L-2019-8)2020 Xiamen Youth Innovation Fund Project of China(Grant No.3502Z20206069).
文摘Large-scale interceptors constitute the main structure of offshore self-driven floating marine litter collection devices,and the structural stability of such interceptors under the action of waves directly influences the overall safety of the device.When the ratio of the diameter of a horizontal cylinder in such interceptors to the incident wavelength is larger than 0.25,the wave force can be calculated by using the diffraction theory,by considering the problem as that of the interaction between the waves and a partially immersed large-scale horizontal cylinder.In this study,an analytical approach to calculate the wave force on a partially immersed large-scale horizontal cylinder was formulated by using the stepwise approximation method.Physical model tests were conducted to investigate the effects of different factors(wave height,period,and immersion depth)on the wave force on a large-scale horizontal cylinder under conditions involving short-period waves.The results show that both horizontal and vertical wave forces on the cylinder increase as the wave height(immersion depth)increases in most cases.The vertical wave force decreases with the decrease of the period.For the horizontal wave force,it increases with the decrease of the period when the wavelength is larger than the diameter of the cylinder and decreases with the decrease of the period when the wavelength is smaller than the diameter of the cylinder.
文摘In this paper, the measurement of an aerodynamic sound source for a semi-circular cylinder in a uniform flow is described using Particle Image Velocimetry (PIV). This experimental technique is based on vortex sound theory, where the time derivative of vorticity is evaluated with the aid of two sets of standard PIV systems. The experimental results indicate that the sound source for the semi-circular cylinder is located around the shear layer near the edge of the semi-circular cylinder. The sound source intensity and the area are reduced in the semi-circular cylinder compared with those of a circular cylinder. This result indicates that the aerodynamic sound of the semi- circular cylinder is smaller than that of the circular cylinder, which supports the microphone measurement result.
文摘A flow of silicon fluid in the gap between eccentric cylinders was studied experimentally.The condition of gaseous cavitation inception during the rotation of internal cylinder was considered.It was shown that at reduction of the gap between cylinders Saffman–Taylor instability appeared on surface of the internal cylinder and then gaseous cavitation was observed.Possibility of one uniform gas formation appearance under this type of instability was demonstrated.
基金supported by the National Defense National Defense Pre-Research Foundation of China(Grant no.301030102)。
文摘Understanding the dynamic response of composite material cartridges during the firing process is of great significance for improving their reliability and safety.A theoretical model describing the dynamic response of composite material cartridges is established based on the thick-walled cylinder theory and rate-dependent constitutive model of composite materials.The correctness of the theoretical model is validated through finite element simulations of cartridge deformation.The influence of chamber pressure and cartridge wall thickness on the cartridge's deformation process and stress distribution is analyzed.The results indicate that the primary deformation of composite material cartridges inside the chamber is elastic deformation.Compared to metal cartridges,composite material cartridges require higher pressure for touching-chamber and are more prone to developing gaps after unloading to ensure smooth extraction.During the deformation process,the touching-chamber behavior of the cartridge can improve the stress distribution.Under the same chamber pressure,the touching-chamber behavior can reduce the circumferential stress by approximately 30%.The inner wall surface of the cartridge is a critical area that requires attention.The touching-chamber behavior can be facilitated by appropriately reducing the cartridge wall thickness while ensuring overall strength.This study can provide guidance for the optimization design of composite material cartridges.
基金supported by the Defense Industrial Technology Development Program of China(No.JCKY2018601C209)。
文摘Titanium alloys are widely used in the aviation and aerospace industries due to their unique mechanical and physical properties.Specifically,thin-walled titanium(Ti)cylinders have received increasing attention for their applications as rocket engine casings,aircraft landing gear,and aero-engine hollow shaft due to their observed improvement in the thrust-to-weight ratio.However,the conventional cutting(CC)process is not appropriate for thin-walled Ti cylinders due to its low thermal conductivity,high strength,and low stiffness.Instead,high-speed ultrasonic vibration cutting(HUVC)assisted processing has recently proved highly effective for Ti-alloy machining.In this study,HUVC technology is employed to perform external turning of a thinwalled Ti cylinder,which represents a new application of HUVC.First,the kinematics,tool path,and dynamic cutting thickness of HUVC are evaluated.Second,the phenomenon of mode-coupling chatter is analyzed to determine the effects and mechanism of HUVC by establishing a critical cutting thickness model.HUVC can increase the critical cutting thickness and effectively reduce the average cutting force,thus reducing the energy intake of the system.Finally,comparison experiments are conducted between HUVC and CC processes.The results indicate that the diameter error rate is 10%or less for HUVC and 51%for the CC method due to a 40%reduction in the cutting force.In addition,higher machining precision and better surface roughness are achieved during thin-walled Ti cylinder manufacturing using HUVC.
基金Supported by National Key R&D Program of China(Grant Nos.2020YFB1709901,2020YFB1709904)National Natural Science Foundation of China(Grant Nos.51975495,51905460)+1 种基金Guangdong Provincial Basic and Applied Basic Research Foundation of China(Grant No.2021-A1515012286)Science and Technology Plan Project of Fuzhou City of China(Grant No.2022-P-022).
文摘The accurate estimation of parameters is the premise for establishing a high-fidelity simulation model of a valve-controlled cylinder system.Bench test data are easily obtained,but it is challenging to emulate actual loads in the research on parameter estimation of valve-controlled cylinder system.Despite the actual load information contained in the operating data of the control valve,its acquisition remains challenging.This paper proposes a method that fuses bench test and operating data for parameter estimation to address the aforementioned problems.The proposed method is based on Bayesian theory,and its core is a pool fusion of prior information from bench test and operating data.Firstly,a system model is established,and the parameters in the model are analysed.Secondly,the bench and operating data of the system are collected.Then,the model parameters and weight coefficients are estimated using the data fusion method.Finally,the estimated effects of the data fusion method,Bayesian method,and particle swarm optimisation(PSO)algorithm on system model parameters are compared.The research shows that the weight coefficient represents the contribution of different prior information to the parameter estimation result.The effect of parameter estimation based on the data fusion method is better than that of the Bayesian method and the PSO algorithm.Increasing load complexity leads to a decrease in model accuracy,highlighting the crucial role of the data fusion method in parameter estimation studies.