Effect of thermal processing and fermentation with Chinese traditional starters on characteristics and allergenicity of wheat matrix

Wheat allergy has become a serious health threat worldwide and its prevalence has increased alarmingly in the past few years.Factors such as food matrix and food processing may alter the structure of wheat proteins,and hence affect its allergenic properties.However,few reports have focused on the influence of Chinese traditional starter fermentation on wheat allergy.In this study,5 starters from different regions of China were used for fermentation,and protein characteristics were monitored by sodium dodecyl sulfate polyacrylamide gel electropheresis,and immunoreactivity analyzed by immunoassay with allergenic serum was obtained from New Zealand white rabbits.The allergenicity of steamed and baked matrices was also evaluated.The results showed that the allergenicity of wheat dough was basically increased at the beginning and then decreased during fermentation,but specific trends depend on different starters.With the progress of fermentation,especially as pH value decreased to 3.0-4.0,the allergenicity decreased significantly.Baking and steaming can reduce the allergenicity of wheat matrix,but fermentation is not a key factor affecting the allergenic activity of proteins.Our results can provide a theoretical basis for controlling wheat allergenicity in food proces sing or producing hypoallergenic food.

Effects of different thermal processing methods on bioactive components,phenolic compounds,and antioxidant activities of Qingke(highland hull-less barley)

Qingke(highland hull-less barley)is a grain replete with substantial nutrients and bioactive ingredients.In this study,we evaluated the effects of boiling(BO),steaming(ST),microwave baking(MB),far-infrared baking(FB),steam explosion(SE),and deep frying(DF)on bioactive components,phenolic compounds,and antioxidant activities of Qingke compared with the effects of traditional roast(TR).Results showed that the soluble dietary fiber,beta-glucan and water-extractable pentosans of Qingke in dry heat processes of TR,SE,MB and FB had a higher content compared with other thermal methods and had a better antioxidant activity of hydroxyl radical scavenging and a better reduction capacity,while those in wet heat processes of BO and ST had a better antioxidant activity of ABTS radical scavenging and a better Fe^(2+) chelating ability.DF-and SE-Qingke had a higher content of tocopherol,phenolic,and flavonoid.Overall,6 free phenolic compounds and 12 bound phenolic compounds of Qingke were identified,and free phenolic compounds suffered more damage during thermal processing.Principal component analysis showed that SE had more advantages in retaining and improving the main biological active ingredients of Qingke,and it may be the best method for treating Qingke.

Point-defect engineering of nanoporous CuBi_(2)O_(4) photocathode via rapid thermal processing for enhanced photoelectrochemical activity

Engineering point defects such as metal and oxygen vacancies play a crucial role in manipulating the electrical,optical,and catalytic properties of oxide semiconductors for solar water splitting.Herein,we synthesized nanoporous CuBi_(2)O_(4)(np-CBO)photocathodes and engineered their surface point defects via rapid thermal processing(RTP)in controlled atmospheres(O_(2),N_(2),and vacuum).We found that the O_(2)-RTP treatment of np-CBO increased the charge carrier density effectively without hampering the nanoporous morphology,which was attributed to the formation of copper vacancies(VCu).Further analyses revealed that the amounts of oxygen vacancies(Vo)and Cu^(1+)were reduced simultaneously,and the relative electrochemical active surface area increased after the O_(2)-RTP treatment.Notably,the point defects(VC_(u),Cu^(1+),and Vo)regulated np-CBO achieved a superb water-splitting photocurrent density of-1.81 m A cm^(-2) under simulated sunlight illumination,which is attributed to the enhanced charge transport and transfer properties resulting from the regulated surface point defects.Finally,the reversibility of the formation of the point defects was checked by sequential RTP treatments(O_(2)-N_(2)-O_(2)-N_(2)),demonstrating the strong dependence of photocurrent response on the RTP cycles.Conclusively,the surface point defect engineering via RTP treatment in a controlled atmosphere is a rapid and facile strategy to promote charge transport and transfer properties of photoelectrodes for efficient solar water-splitting.

Design of Rapid Thermal Processing for Large Diameter Wafer

The relationship between the arrangement of tungsten-halogen lamps and the uniformity of irradiance received by the wafer is discussed, and a sort of axial-symmetrical lamps-array is designed to guarantee that the irradiation on the edge is approximately the same as the one on the center of the wafer. The magnitude of temperature on the wafer vs. the power of tungsten-halogen lamps is calculated numerically.

Effects of bioactive compounds and pharmacological activities in medicinal fruits and vegetables by thermal processing

With the advancement of living standards,the role of healthy diets in maintaining well-being has gained prominence.The concept of“medicinal fruits and vegetables”has attracted much research attention recently.Medicinal fruits and vegetables are rich in nutrients and high in edible value,and are also necessary for people's daily diet.In order to better exert the effect of medicinal fruits and vegetables and prolong their shelf life,this paper reviews the effects of common thermal processing methods(boiling,steaming,microwaving,hot air drying,and pasteurization)on the bioactive compounds and pharmacological activities of medicinal fruits and vegetables.It is found that different heat treatment methods have their own advantages and disadvantages,and microwave drying has greater advantages in comparison.Through the summary of the thermal processing methods of medicinal fruits and vegetables,it is expected to provide a theoretical reference for its rational utilization in the field of fruits and vegetables and the improvement of thermal processing methods.

Application of Spectral Angle Mapper Classification to Discriminate Hydrothermal Alteration in Southwest Birjand, Iran, Using Advanced Spaceborne Thermal Emission and Reflection Radiometer Image Processing

The purpose of this study is to evaluate the Spectral Angle Mapper （SAM） classification method for determining the optimum threshold （maximum spectral angle） to unveil the hydrothermal mineral assemblages related to mineral deposits. The study area indicates good potential for Cu-Au porphyry, epithermal gold deposits and hydrothermal alteration well developed in arid and semiarid climates, which makes this region significant for Advanced Spaceborne Thermal Emission and Reflection Radiometer （ASTER） image processing analysis. Given that achieving an acceptable mineral mapping requires knowing the alteration patterns, petrochemistry and petrogenesis of the igneous rocks while considering the effect of weathering, overprinting of supergene alteration, overprinting of hypogene alteration and host rock spectral mixing, SAM classification was implemented for argillic, sericitic, propylitic, alunitization, silicification and iron oxide zones of six previously known mineral deposits： Maherabad, a Cu-Au porphyry system; Sheikhabad, an upper part of Cu-Au porphyry system; Khoonik, an Intrusion related Au system; Barmazid, a low sulfidation epithermal system; Khopik, a Cu-Au porphyry system; and Hanish, an epithermal Au system. Thus, the investigation showed that although the whole alteration zones are affected by mixing, it is also possible to produce a favorable hydrothermal mineral map by such complementary data as petrology, petrochemistry and alteration patterns.

Guide and control of thermal conduction with isotropic thermodynamic parameters based on a rotary-concentrating device

A rotary-concentrating device for thermal conduction is constructed to control and guide thermal energy transmitting in elastic plates.The designed device has the ability of concentrating for thermal conduction and controlling the processes of thermal diffusion in a plate.The multilayered isotropic material properties of the rotary-concentrating device are derived based on the transformation and rotary medium method and a rotation parameter to control the thermal diffusion process is introduced.The efficiency of the rotary-concentrating device for thermal conduction is verified.Stability of temperature fields in a plate with the rotary-concentrating device is analyzed to study the performance of rotary-concentrating.Numerical examples show that the constructed rotary-concentrating device for thermal conduction can effectively rotate and focus on the thermal energy into the device for a wide range of diffusion temperatures,which can enhance the thermal conduction.Therefore,this study can provide a theoretical support for potential applications in fields of energy harvesting and thermal conduction control.

Emitter of hetero-junction solar cells created using pulsed rapid thermal annealing

In this paper, we use a pulsed rapid thermal processing （RTP） approach to create an emitter layer of heterojunction solar cell. The process parameters and crystallization behaviour are studied. The structural, optical and electric properties of the crystallized films are also investigated. Both the depth of PN junction and the conductivity of the emitter layer increase with the number of RTP pulses increasing. Simulation results show that efficiencies of such solar cells can exceed 15% with a lower interface recombination rate, but the highest efficiency is 11.65% in our experiments.

Methane Conversion Using Dielectric Barrier Discharge: Comparison with Thermal Process and Catalyst Effects

The direct conversion of methane using a dielectric barrier discharge has been experimentally studied. Experiments with different values of flow rates and discharge voltages have been performed to investigate the effects on the conversion and reaction products both qualitatively and quantitatively. Experimental results indicate that the maximum conversion of methane has been 80% at an input flow rate of 5 ml/min and a discharge voltage of 4 kV. Experimental results also show that the optimum condition has occurred at a high discharge voltage and higher input flow rate. In terms of product distribution, a higher flow rate or shorter residence time can increase the selectivity for higher hydrocarbons. No hydrocarbon product was detected using the thermal method, except hydrogen and carbon. Increasing selectivity for ethane was found when Pt and Ru catalysts presented in the plasma reaction. Hydrogenation of acetylene in the catalyst surface could have been the reason for this phenomenon as the selectivity for acetylene in the products was decreasing.

Effects of Elevated Air Temperatures on Soil Thermal and Hydrologic Processes in the Active Layer in an Alpine Meadow Ecosystem of the Qinghai-Tibet Plateau

In this study,effects of elevated air temperatures on thermal and hydrologic process of the shallow soil in the active layer were investigated. Open-top chambers(OTCs)were utilized to increase air temperatures 1-2℃ in OTC-1 and 3-5℃ in OTC-2 in the alpine meadow ecosystem on the Qinghai- Tibetan Plateau.Results show that the annual air temperatures under OTC-1 and OTC-2 were 1.21℃ and 3.62℃ higher than the Control,respectively.The entirely-frozen period of shallow soil in the active layer was shortened and the fully thawed period was prolonged with temperature increase.The maximum penetration depth and duration of the negative isotherm during the entirely-frozen period decreased, and soil freezing was retarded in the local scope of the soil profile when temperature increased.Meanwhile, the positive isotherm during the fully-thawed period increased,and the soil thawing was accelerated.Soil moisture under different manipulations decreased with the temperature increase at the same depth. During the early freezing period and the early fully- thawed period,the maximum soil moisture under the Control manipulation was at 0.2 m deep,whereas under OTC-1 and OTC-2 manipulations,the maximum soil moisture were at 0.4-0.5 m deep. These results indicate that elevated temperatures led to a decrease of the moisture in the surface soil.The coupled relationship between soil temperature and moisture was significantly affected by the temperature increase.During the freezing and thawing processes, the soil temperature and moisture under different manipulations fit the regression model given by the equationθV=a/{1+exp[b(TS+c)]}+d.

Surface modification of magnesium alloys using thermal and solid-state cold spray processes:Challenges and latest progresses

Potential engineering applications of magnesium(Mg)and Mg-based alloys,as the lightest structural metal,have made them a popular subject of study.However,the inferior corrosion and wear characteristics significantly limit their application range.It is widely recognized that surface treatment is the most commonly utilized technique for remarkably improving a substrate’s surface characteristics.Numerous methods have been introduced for the surface treatment of Mg and Mg-based alloys to improve their corrosion behavior and tribological performance.Among these,thermal spray(TS)technology provides several methods for deposition of various functional metallic,ceramic,cermet,or other coatings tailored to particular conditions.Recent researches have shown the tremendous potential for thermal spray coated Mg alloys for biomedical and industrial applications.In this context,the cold spray(CS)method,as a comparatively new TS coating technique,can generate the coating layer using kinetic energy rather than combined thermal and kinetic energies,like the high-velocity oxy-fuel(HVOF)spray method.Moreover,the CS process,as a revolutionary method,is able to repair and refurbish with a faster turnaround time;it also provides solutions that do not require dealing with the thermal stresses that are part of the other repair processes,such as welding or other TS processes using a high-temperature flame.In this review paper,the recently designed coatings that are specifically applied to Mg alloys(primarily for industrial applications)employing various coating processes are reviewed.Because of the increased utilization of CS technology for both 3D printed(additively manufactured)coatings and repair of structurally critical components,the most recent CS methods for the surface treatment,repair,and refurbishment of Mg alloys as well as their benefits and restrictions are then discussed and reviewed in detail.Lastly,the prospects of this field of study are briefly discussed,along with a summary of the presented work.

Research on Development of Dolomite-Ferrosilicon Thermal Reduction Process of Magnesium Production

Up to now, the Pedgion magnesium reduction process is the dominating magnesium production process. In 2004, about 98% of raw magnesium is produced by Pedgion magnesium reduction process in China which equals to 60% of the global output. It shows that the dolomite-ferrosilicon thermal reduction process is the most important method to produce magnesium in the world. Limited by the disadvantage of dolomite-ferrosilicon thermal reduction process, the magnesium producing process always followed by relatively severe pollution, while the resource utilizing efficiency keeps very low. With the rapid development of dolomite-ferrosilicon thermal reduction process in China, many research works have been done aiming at the process technology and the reduction theory, and the magnesium producing process has got great evolution. The history of dolomite-ferrosilicon thermal reduction process was introduced; the process character, the merits and which defects were also discussed. Defects in dolomite-ferrosilicon thermal reduction process were expatiated, and feasible method and idea to upgrade the process was put forward. The main problems and the potential troubles hindering the development of magnesium industry were analyzed. Finally, the probability to further improve the thermal reduction process and the effective approaches to develop Chinese magnesium industry were discussed.

Numerical simulation of dynamic thermal process during doublesided asymmetrical TIG backing welding of large thick plates

The dynamic thermal process during double-sided asymmetrical TIG backing welding of large thick plates （ 1 000 mm×700 mm×50 mm） is numerically simulated using MSC. MARC. The effect of arc distance on the thermal cycle in weld zone during double-sided asymmetrical T1G backing welding is investigated. The results show that the workpiece experiences double-peak thermal cycle in double-sided asymmetrical TIG backing welding. On the one hand, the fore arc has the pre- heating effect on the rear pass, and the pre-heating temperature depends on the distance between the double arcs, the heat input of fore arc, and the initial temperature of workpiece. On the other hand, the rear arc has the post-heating effect on the fore pass. The mutual effects of two heat sources decrease with the increase of arc distance.

Perturbation Solutions for Thermal Process of Honeycomb Regenerator

A parameter perturbation for the unsteady-state heat-transfer characteristics of honeycomb regenerator is presented. It is limited to the cases where the storage matrix has a small wall thickness so that no temperature variation in the matrix perpendicular to the flow direction is considered. Starting from a two-phase transient thermal model for the gas and storage matrix, an approximate solution for regenerator heat transfer process is derived using the multiple-scale method for the limiting case where the longitudinal heat conduction of solid matrix is far less than the convective heat transfer between the gas and the solid. The regenerator temperature profiles are expressed as Taylor series of the coefficient of solid heat conduction item in the model. The analytical validity is shown by comparing the perturbation solution with the experiment and the numerical solution. The results show that it is possible for the perturbation to improve the effectiveness and economics of thermal research on regenerators.

Segregation of Molten Salt on Chromizing in Thermal Diffusion Process

The segregation of thermal diffusion salt bath chromizing process was analyzed. The experimental chromizing ingredients were prepared by the four groups A, B, C, and D. In order to study the segregation status of this case, the cooling molten salt in the crucible was removed by drilling from the heart core of molten salt. The core of molten salt was analyzed by X-ray fluorescence spectroscopy and XRD. Through the analysis, we can conclude that the Cr element deposited in the bottom was 4.51 times than the top. Chloride added to the molten salt will reduce segregation. Meantime we proposed some measures to overcome the segregation problem.

Isothermal and athermal martensitic transformations of ceria cerla doped zilrconian

Martensitic transformation behavior was studied for zirconia containing 4%～10% CeO2 (in mole fraction) by using a dilatometric method. The Ms (Martensite start temperature) decreased near linearly with increasing CeO2. Different transformation modes were observed depending on the composition and cooling rate. ZrO2 containing 6% CeO2 showed isothermal transformation behavior, whereas ZrO2 containing 9% and 10% CeO2 showed athermal transformation behavior. However, ZrO2 containing 8% CeO2 showed either isothermal or athermal transformations behavior depending on the cooling rate. A TTT (Time-Temperature-Transformation) diagram was proposed for ZrO2 containing 8% CeO2.

Preparation and modification of VO_2 thin film on R-sapphire substrate by rapid thermal process

The VO2 thin film with high performance of metal-insulator transition （MIT） is prepared on R-sapphire substrate for the first time by magnetron sputtering with rapid thermal process （RTP）. The electrical characteristic and THz transmittance of MIT in VO2 film are studied by four-point probe method and THz time domain spectrum （THz-TDS）. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, atomic force microscopy （AFM）, and search engine marketing （SEM） are employed to analyze the crystalline structure, valence state, surface morphology of the film. Results indicate that the properties of VO2 film which is oxidized from the metal vanadium film in oxygen atmosphere are improved with a follow- up RTP modification in nitrogen atmosphere. The crystallization and components of VO2 film are improved and the film becomes compact and uniform. A better phase transition performance is shown that the resistance changes nearly 3 orders of magnitude with a 2-~C hysteresis width and the THz transmittances are reduced by 64% and 60% in thermal and optical excitation respectively.

Preparation and Property of Chromium Carbide Thermal Diffusion Coating on Cold Working Die Materials

Thermal diffusion （TD） salt bath chromizing of cold working dies was studied. Firstly, it obtained an ideal salt bath formula by comparing with a variety of formulas, and then obtained the influence rule of coating thickness based on studying of some process parameters. The microstructure morphologies and phase structures of the TD chromizing coating were investigated by X-ray diffraction （XRD）, energy-dispersive spectrometry （EDS） and other modern analysis methods. Meanwhile, it carried out a system of testing and analysis of coating, such as hardness, wear resistance, etc.

Mathematical model of metallurgical thermal processes and application

There are lots of physical changes and chemical reactions in the processes of iron and steel making, these processes are quite complex in the aspect of heat transfer.The processes of iron and steel making can be approximately divided into three kinds.The first kinds are the processes of fusion metallurgy which involve enormous chemical reactions,such as blast furnace,converter,electric furnace and coke oven.The second kinds are the processes of heating and cooling which are mainly the physical changes,such as walking-beam reheating furnace,annular heating furnace and car-type furnace.The third kinds are the processes of heat treatment which mainly adjust metallurgical structure of metal,such as roller hearth heat treatment furnace, strip continuous heat treatment vertical/horizontal furnace and HPH bell-type annealing furnace.Every process can only be finished in particular thermal equipment.And all the physical and chemical processes mentioned above must obey first principles of engineering thermodynamics,heat & mass transfer,hydromechanics, combustion,metallurgy physical chemistry etc,and which can be summarized as principle of heat transfer,mass transfer,momentum transfer and chemistry reaction.In this paper,based on first principle of heat and mass transfer in iron and steel making processes,a series of mathematical models of thermal equipments and processes are presented.Such as the model of hot-blast stoves,coke oven,CDQ-boiler system,sintering, reheating furnace,soaking furnace,annular heating furnace,roller hearth heat treatment furnace,strip continuous heat treatment vertical/horizontal furnace,HPH bell-type annealing furnace,control cooling of medium plate,burner,heat exchanger and regenerative burner etc.The on-line application of the model is based on experimental certification of the mathematical model.And finally the computer optimization system of metallurgical thermal process is obtained.

Morphology and Structure of SiO_2 Film Using Thermal Oxidation Process on(111)Silicon Crystals in Dry Oxygen Atmosphere

By means of scanning electron microscope(SEM)and high voltage electron microscope(HVEM)we have observed and analysed morphology and micro-structure of silicon oxide film with different thickness formed on(111)silicon monocrystal under dry oxygen atmosphere at 1100℃.Compared with their oxidation kinetic curves consisted of three stages,we suggested a mechanism on forming silicon oxide film.According to electron and X-ray diffraction analyses the silicon oxide films consisted of silica with different crystal structure.We also have discussed a stacking fault and a dislocation formed in the Si-Sio_2 interface region simulaneously forming silicon oxide film.