Terrestrial heat flow is an important physical parameter in the study of heat transfer and thermal structure of the earth and it has great significance in the genesis and development and utilization potential of regio...Terrestrial heat flow is an important physical parameter in the study of heat transfer and thermal structure of the earth and it has great significance in the genesis and development and utilization potential of regional geothermal resources.Although several breakthroughs in geothermal exploration have been made in Guizhou Province.The terrestrial heat flow in this area has not been properly measured,restricting the development of geothermal resources in the province.For this reason,the terrestrial heat flow in Guizhou was measured in this study,during which the characteristics of heat flow were determined using borehole thermometry,geothermal monitoring and thermal property testing.Moreover,the influencing factors of the terrestrial heat flow were analyzed.The results show that the thermal conductivity of rocks ranges from 2.0W/(m·K)to 5.0 W/(m·K),with an average of 3.399 W/(m·K);the heat flow varies from 30.27 mW/m^(2) to 157.55 mW/m^(2),with an average of 65.26±20.93 mW/m^(2),which is slightly higher than that of the average heat flow in entire land area in China.The heat flow in Guizhou generally follows a dumbbell-shaped distribution,with high values present in the east and west and low values occurring in the north and south.The terrestrial heat flow is related to the burial depths of the Moho and Curie surface.The basaltic eruptions in the Emeishan led to a thinner lithosphere,thicker crust and lateral emplacement,which dominated the basic pattern of heat flow distribution in Guizhou.In addition,the dichotomous structure of regional active faults and concealed deep faults jointly control the heat transfer channels and thus influence the terrestrial heat flow.展开更多
Based on temperature logs of 117 boreholes and thermal conductivity of 119 rock samples, the first group of 35 heat flow data in the Junggar Basin are presented. The thermal gradients vary between 11.6 and 26.5℃/km ,...Based on temperature logs of 117 boreholes and thermal conductivity of 119 rock samples, the first group of 35 heat flow data in the Junggar Basin are presented. The thermal gradients vary between 11.6 and 26.5℃/km , and the thermal conductivity changes from 0.17 to 3.6 W/mK. Heat flow ranges from 23.4 to 53.7 mW/m2 with a mean of (42.3±7.7) mW/m2. The heat flow pattern shows that heat flow is higher in the uplifts and lower in the depressions. The factors affecting the heat flow and its distribution include basin type, basement structure, sediment thickness, radioactive heat generation, etc. The overall low present-day heat flow in the Junggar Basin reflected its tectonothermal evolution characterized by lithospheric thickening, thrust and fault at shallow crust as well as consequently quick subsidence during the Late Cenozoic.展开更多
Temperature logging curves at 8 boreholes and well-testing temperature data at 142 boreholes are used to determine geotemperature gradients in the Bohai Basin. The thermal conductivities of 86 rock samples are measure...Temperature logging curves at 8 boreholes and well-testing temperature data at 142 boreholes are used to determine geotemperature gradients in the Bohai Basin. The thermal conductivities of 86 rock samples are measured at laboratory and the effects of porosity and temperature are corrected to obtain conductivities in situ. Terrestrial heat flow densities at 76 wells are determined based on these data. The distribution of the heat flow indicates that the terrestrial heat flow in the Bohai Basin is relatively high with an average value of 65.8 mW/m2. This characteristic is caused by the tectonic evolution of the basin. During Cenozoic, the litho-sphere stretched intermittently and the crust thinned so that heat conducted from the mantle increased and formed thermal abnormity at depth beneath the basin.展开更多
Based on the geo-temperature data of 13 systematically continuous temperature log curves and 700 testing oil boreholes in Jiyang depression, Shengli Oilfield, and the measured thermal conductivities of 47 rock samples...Based on the geo-temperature data of 13 systematically continuous temperature log curves and 700 testing oil boreholes in Jiyang depression, Shengli Oilfield, and the measured thermal conductivities of 47 rock samples, the terrestrial heat flow densities of 114 boreholes of Jiyang depression and its surrounding areas are determined, including 13 of those data derived from systemically continuous temperature logging. The results show that Jiyang depression has a relatively high background heat flow with an average value (65.8 5.4) mW/m2. The lateral variation of heat flow in basin has negative correlation with basement depth. Moreover, heat flow of uplift areas with shallower basement is high, so are those of regions with volcanic rocks, and those of depression areas with deep basement are relatively low. The heat flow densities of different structural units of Jiyang depression can be summarized as follows: The average heat flow value of Zhanhua sag is (67.4 5.3) mW/m2, higher than that of the whole basin, that of Dongying sag is (66.0 6.1) mW/m2, and that of Chezhen sag is (65.1 3.7) mW/m2. It is apparent that these latter two values are approximate to the average value of the whole Jiyang depression, while the average value of Huimin sag is (63.65.0) mW/m2, lower than that of the whole basin. In fact, the basement depth and the distribution framework of uplift and depression areas are all controlled by the process of lithosphere extension. In addition, the distribution of volcanic rocks in basin is also relatively close to this extension geodynamic process. In summary, the distribution characteristics of terrestrial heat flow of Jiyang depression is determined by the Cenozoic tectono-thermal events of this region.展开更多
基金supported by the China Geological Survey Project(Grant No.DD20190128Grant No.DD20221676)Basic Research Operations Project of the Institute of Hydrogeology and Environmental Geology,Chinese Academy of Geological Sciences(SK202212)。
文摘Terrestrial heat flow is an important physical parameter in the study of heat transfer and thermal structure of the earth and it has great significance in the genesis and development and utilization potential of regional geothermal resources.Although several breakthroughs in geothermal exploration have been made in Guizhou Province.The terrestrial heat flow in this area has not been properly measured,restricting the development of geothermal resources in the province.For this reason,the terrestrial heat flow in Guizhou was measured in this study,during which the characteristics of heat flow were determined using borehole thermometry,geothermal monitoring and thermal property testing.Moreover,the influencing factors of the terrestrial heat flow were analyzed.The results show that the thermal conductivity of rocks ranges from 2.0W/(m·K)to 5.0 W/(m·K),with an average of 3.399 W/(m·K);the heat flow varies from 30.27 mW/m^(2) to 157.55 mW/m^(2),with an average of 65.26±20.93 mW/m^(2),which is slightly higher than that of the average heat flow in entire land area in China.The heat flow in Guizhou generally follows a dumbbell-shaped distribution,with high values present in the east and west and low values occurring in the north and south.The terrestrial heat flow is related to the burial depths of the Moho and Curie surface.The basaltic eruptions in the Emeishan led to a thinner lithosphere,thicker crust and lateral emplacement,which dominated the basic pattern of heat flow distribution in Guizhou.In addition,the dichotomous structure of regional active faults and concealed deep faults jointly control the heat transfer channels and thus influence the terrestrial heat flow.
文摘Based on temperature logs of 117 boreholes and thermal conductivity of 119 rock samples, the first group of 35 heat flow data in the Junggar Basin are presented. The thermal gradients vary between 11.6 and 26.5℃/km , and the thermal conductivity changes from 0.17 to 3.6 W/mK. Heat flow ranges from 23.4 to 53.7 mW/m2 with a mean of (42.3±7.7) mW/m2. The heat flow pattern shows that heat flow is higher in the uplifts and lower in the depressions. The factors affecting the heat flow and its distribution include basin type, basement structure, sediment thickness, radioactive heat generation, etc. The overall low present-day heat flow in the Junggar Basin reflected its tectonothermal evolution characterized by lithospheric thickening, thrust and fault at shallow crust as well as consequently quick subsidence during the Late Cenozoic.
基金This work was supported by the State Key Basic Research and Development Project of China (Grant No. G1999330402) the "95" Plan Research Project of China Ocean Petroleum Corporation (Grant No. 9605-3) the Research Fund for Doctoral Program of Higher E
文摘Temperature logging curves at 8 boreholes and well-testing temperature data at 142 boreholes are used to determine geotemperature gradients in the Bohai Basin. The thermal conductivities of 86 rock samples are measured at laboratory and the effects of porosity and temperature are corrected to obtain conductivities in situ. Terrestrial heat flow densities at 76 wells are determined based on these data. The distribution of the heat flow indicates that the terrestrial heat flow in the Bohai Basin is relatively high with an average value of 65.8 mW/m2. This characteristic is caused by the tectonic evolution of the basin. During Cenozoic, the litho-sphere stretched intermittently and the crust thinned so that heat conducted from the mantle increased and formed thermal abnormity at depth beneath the basin.
文摘Based on the geo-temperature data of 13 systematically continuous temperature log curves and 700 testing oil boreholes in Jiyang depression, Shengli Oilfield, and the measured thermal conductivities of 47 rock samples, the terrestrial heat flow densities of 114 boreholes of Jiyang depression and its surrounding areas are determined, including 13 of those data derived from systemically continuous temperature logging. The results show that Jiyang depression has a relatively high background heat flow with an average value (65.8 5.4) mW/m2. The lateral variation of heat flow in basin has negative correlation with basement depth. Moreover, heat flow of uplift areas with shallower basement is high, so are those of regions with volcanic rocks, and those of depression areas with deep basement are relatively low. The heat flow densities of different structural units of Jiyang depression can be summarized as follows: The average heat flow value of Zhanhua sag is (67.4 5.3) mW/m2, higher than that of the whole basin, that of Dongying sag is (66.0 6.1) mW/m2, and that of Chezhen sag is (65.1 3.7) mW/m2. It is apparent that these latter two values are approximate to the average value of the whole Jiyang depression, while the average value of Huimin sag is (63.65.0) mW/m2, lower than that of the whole basin. In fact, the basement depth and the distribution framework of uplift and depression areas are all controlled by the process of lithosphere extension. In addition, the distribution of volcanic rocks in basin is also relatively close to this extension geodynamic process. In summary, the distribution characteristics of terrestrial heat flow of Jiyang depression is determined by the Cenozoic tectono-thermal events of this region.
