During heat treatment process, the distortion behavior inevitably appears in hydraulic turbine blade castings. In this research, a technology was developed for real-time measurement of the distortion in hydraulic turb...During heat treatment process, the distortion behavior inevitably appears in hydraulic turbine blade castings. In this research, a technology was developed for real-time measurement of the distortion in hydraulic turbine blade castings at the still air cooling and forced air cooling stages during heat treatment process. The method was used to measure the distortion behavior at the cooling stages in both normalizing and tempering processes. At the normalization, the distortion at the blade comer near outlet side undergoes four stages with alternating bending along positive and negative directions. At the tempering stage, the distortion could be divided into two steps. The temperature difference between the two surfaces of blade casting was employed to analyze the distortion mechanism. The measured results could be applied to guide the production, and the machining allowance could be reduced by controlling the distortion behavior.展开更多
Distortion is a technical indicator in the field of voice signal processing. The design is a portable distortion degree tester, based on Field-Progranmmble Gate Array （FleA, EP2C20） as the cote, using harmonic analy...Distortion is a technical indicator in the field of voice signal processing. The design is a portable distortion degree tester, based on Field-Progranmmble Gate Array （FleA, EP2C20） as the cote, using harmonic analysis method which better solve the distortion problem of acctwacy. It can achieve the signal transformation from the time-domain to the frequency-donkain, and is widely used for signal spectrum analysis. All the componets used in the design are low power, high perf-, low drift and industrial grade compionents. The reference voltage sources of ADC and DAC have identical performance of high stability, high precision. The dtr.k is the precise stable clock with FPGA temperature compensation. This project can get the cost-effective, high-precision, low power and portable design goals.展开更多
The objective of the present paper is to develop nonlinear finite element method models for predicting the weld-induced initial deflection and residual stress of plating in steel stiffened-plate structures. For this p...The objective of the present paper is to develop nonlinear finite element method models for predicting the weld-induced initial deflection and residual stress of plating in steel stiffened-plate structures. For this purpose, three-dimensional thermo-elastic-plastic finite element method computations are performed with varying plate thickness and weld bead length (leg length) in welded plate panels, the latter being associated with weld heat input. The finite element models are verified by a comparison with experimental database which was obtained by the authors in separate studies with full scale measurements. It is concluded that the nonlinear finite element method models developed in the present paper are very accurate in terms of predicting the weld-induced initial imperfections of steel stiffened plate structures. Details of the numerical computations together with test database are documented.展开更多
The uniform mathematical model of distortion signals in power grid has been setup with the theory of Wiener-G Functional. Firstly,the Matlab simulation models were established. Secondly,the Wiener kernel of power load...The uniform mathematical model of distortion signals in power grid has been setup with the theory of Wiener-G Functional. Firstly,the Matlab simulation models were established. Secondly,the Wiener kernel of power load was found based on the Gaussian white noise as input. And then the uniform mathematical model of the power grid signal was established according to the homogeneous of the same order of Wiener functional series. Finally,taking three typical distortion sources which are semiconductor rectifier,electric locomotive and electric arc furnace in power grid as examples,we have validated the model through the Matlab simulation and analyzed the simulation errors. The results show that the uniform mathematical model of distortion signals in power grid can approximation the actual model by growing the items of the series under the condition of the enough storage space and computing speed.展开更多
In this paper, new risk measures are introduced, tation results are also given. These newly introduced risk introduced by Song and Yan （2009） and Karoui （2009）. and the corresponding represen- measures are extens...In this paper, new risk measures are introduced, tation results are also given. These newly introduced risk introduced by Song and Yan （2009） and Karoui （2009）. and the corresponding represen- measures are extensions of those展开更多
Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of sp...Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of specimens under loading and unloading in tensile tests, and combining with calculating welding parameters. Meanwhile, the welding heat source eficiencies obtained are compared with those of the measuring-calculating method. The research results show that the welding heat source efficiencies are almost the same as those obtained by the measuring-calculating method. Therefore, the welding heat source efficiency can be determined accurately by this method, and a new determining method of the heat source efficiency for the welding heat process calculating has been provided.展开更多
基金supported financially by the National Eleventh Five-Year Science and Technology Support Program of China through Grant No.2007BAF02B02Major National Sci-Tech Project of China No 2011ZX04014-052
文摘During heat treatment process, the distortion behavior inevitably appears in hydraulic turbine blade castings. In this research, a technology was developed for real-time measurement of the distortion in hydraulic turbine blade castings at the still air cooling and forced air cooling stages during heat treatment process. The method was used to measure the distortion behavior at the cooling stages in both normalizing and tempering processes. At the normalization, the distortion at the blade comer near outlet side undergoes four stages with alternating bending along positive and negative directions. At the tempering stage, the distortion could be divided into two steps. The temperature difference between the two surfaces of blade casting was employed to analyze the distortion mechanism. The measured results could be applied to guide the production, and the machining allowance could be reduced by controlling the distortion behavior.
文摘Distortion is a technical indicator in the field of voice signal processing. The design is a portable distortion degree tester, based on Field-Progranmmble Gate Array （FleA, EP2C20） as the cote, using harmonic analysis method which better solve the distortion problem of acctwacy. It can achieve the signal transformation from the time-domain to the frequency-donkain, and is widely used for signal spectrum analysis. All the componets used in the design are low power, high perf-, low drift and industrial grade compionents. The reference voltage sources of ADC and DAC have identical performance of high stability, high precision. The dtr.k is the precise stable clock with FPGA temperature compensation. This project can get the cost-effective, high-precision, low power and portable design goals.
文摘The objective of the present paper is to develop nonlinear finite element method models for predicting the weld-induced initial deflection and residual stress of plating in steel stiffened-plate structures. For this purpose, three-dimensional thermo-elastic-plastic finite element method computations are performed with varying plate thickness and weld bead length (leg length) in welded plate panels, the latter being associated with weld heat input. The finite element models are verified by a comparison with experimental database which was obtained by the authors in separate studies with full scale measurements. It is concluded that the nonlinear finite element method models developed in the present paper are very accurate in terms of predicting the weld-induced initial imperfections of steel stiffened plate structures. Details of the numerical computations together with test database are documented.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51277043)
文摘The uniform mathematical model of distortion signals in power grid has been setup with the theory of Wiener-G Functional. Firstly,the Matlab simulation models were established. Secondly,the Wiener kernel of power load was found based on the Gaussian white noise as input. And then the uniform mathematical model of the power grid signal was established according to the homogeneous of the same order of Wiener functional series. Finally,taking three typical distortion sources which are semiconductor rectifier,electric locomotive and electric arc furnace in power grid as examples,we have validated the model through the Matlab simulation and analyzed the simulation errors. The results show that the uniform mathematical model of distortion signals in power grid can approximation the actual model by growing the items of the series under the condition of the enough storage space and computing speed.
基金Supported in part by the National Natural Science Foundation of China (10971157)Key Projects of Philosophy and Social Sciences Research+1 种基金Ministry of Education of China (09JZD0027)The Talent Introduction Projects of Nanjing Audit University
文摘In this paper, new risk measures are introduced, tation results are also given. These newly introduced risk introduced by Song and Yan （2009） and Karoui （2009）. and the corresponding represen- measures are extensions of those
文摘Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of specimens under loading and unloading in tensile tests, and combining with calculating welding parameters. Meanwhile, the welding heat source eficiencies obtained are compared with those of the measuring-calculating method. The research results show that the welding heat source efficiencies are almost the same as those obtained by the measuring-calculating method. Therefore, the welding heat source efficiency can be determined accurately by this method, and a new determining method of the heat source efficiency for the welding heat process calculating has been provided.
