期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
褐色高温单孢菌PE-211产纤维素酶的酶学特性研究 被引量:5
1
作者 黎海彬 黄日波 韦小英 《广西大学学报(自然科学版)》 CAS CSCD 2004年第3期207-210,共4页
对褐色高温单孢菌PE-211(ThermomonosporafuscaPE-211)形态学和生物学特征进行了研究.该菌适宜在pH8.0~10.0、55~60℃条件下生长.初步研究了该菌产生的纤维素酶(CMCase)的一些基本性质,结果表明,CMCase最适作用温度为75℃,最适作用pH... 对褐色高温单孢菌PE-211(ThermomonosporafuscaPE-211)形态学和生物学特征进行了研究.该菌适宜在pH8.0~10.0、55~60℃条件下生长.初步研究了该菌产生的纤维素酶(CMCase)的一些基本性质,结果表明,CMCase最适作用温度为75℃,最适作用pH为9.0,Ca2+和Mn2+对酶反应有促进作用,Pb2+和Hg2+对酶反应有抑制作用.这种酶制剂在洗涤剂工业中具有良好的应用前景. 展开更多
关键词 褐色高温单孢菌 纤维索酶 酶学性质
下载PDF
紫外线和^(60)Co-γ联合诱变褐色高温单孢菌及产酶特性研究
2
作者 周望平 邱美珍 +2 位作者 杨俊 杜丽飞 王红兵 《激光生物学报》 CAS CSCD 2012年第5期394-398,共5页
本研究以褐色高温单孢菌(Thermomonospora fusca)为出发菌株,通过紫外线和60Co-γ射线联合诱变,获得了一株纤维素酶高产菌株AV8,CMC酶活力达到0.679 IU/mL,与出发菌株相比,其产酶能力提高3.53倍。通过对AV8产纤维素酶的培养条件进行测定... 本研究以褐色高温单孢菌(Thermomonospora fusca)为出发菌株,通过紫外线和60Co-γ射线联合诱变,获得了一株纤维素酶高产菌株AV8,CMC酶活力达到0.679 IU/mL,与出发菌株相比,其产酶能力提高3.53倍。通过对AV8产纤维素酶的培养条件进行测定,结果显示:产纤维素酶最适应温度为55℃;该菌的最适产CMC酶初始PH值为7.0,最适产FPA酶初始PH值为8.0;当培养到第7天时,产CMC酶达到高峰。当培养到第8天时产FPA酶达到高峰。 展开更多
关键词 褐色高温单孢菌 纤维素酶 诱变
下载PDF
褐色高温单孢菌PE-211纤维素酶的纯化及固定化研究
3
作者 黎海彬 《现代化工》 CAS CSCD 北大核心 2007年第z1期181-183,185,共4页
褐色高温单孢菌PE-211纤维素酶经硫酸铵盐析、2次SephadexG-100柱纯化,粗酶液被纯化47.5倍,比活力为54.15 IU/mg,以戊二醛为交联剂制备固定化酶.酶动力学研究表明,固定化酶的最适pH为8.5,最适温度为70℃,且固定化酶在60~80℃活力较高;... 褐色高温单孢菌PE-211纤维素酶经硫酸铵盐析、2次SephadexG-100柱纯化,粗酶液被纯化47.5倍,比活力为54.15 IU/mg,以戊二醛为交联剂制备固定化酶.酶动力学研究表明,固定化酶的最适pH为8.5,最适温度为70℃,且固定化酶在60~80℃活力较高;该酶的耐热性很强,而固定化酶的热稳定性比原酶强;以羧甲基纤维素钠为底物,固定化酶的Km为7.19 mg/mL,Vmax为0.132 mg/(mL·min). 展开更多
关键词 褐色高温单孢菌 纤维素酶 固定化
下载PDF
Selection of a Thermophilic Alkalitolerant Actinomycete and Conditions for CMCase Production
4
作者 齐云 赵林 +1 位作者 廖银章 谭欣 《Transactions of Tianjin University》 EI CAS 2005年第3期204-208,共5页
Five thermophilic strains that can degrade cellulose were isolated from the compost of a waste management in Guangzhou, China. Since one of them degraded cellulose effectively, it was chosen as the study strain. Based... Five thermophilic strains that can degrade cellulose were isolated from the compost of a waste management in Guangzhou, China. Since one of them degraded cellulose effectively, it was chosen as the study strain. Based on its morphology, spores′ susceptibility to heat, cell wall composition and other characteristics, the organism was classified as Thermomonospora fusca. Conditions for production of carboxy methyl cellulase (CMCase) were examined. The optimal temperature and pH value for enzyme production were 50 ℃ and 10.5, respectively. Cellulosic materials and easily metabolisable carbohydrates served as carbon sources for the growth of the strain. Only cotton, avicel,carboxy methyl cellulose (CMC) acted as potent inducers for the production of cellulases by this strain. Despite excellent growth on easily metabolisable carbohydrates, only constitutive levels of cellulases were produced. The optimal carbon and nitrogen sources for CMCase production were cotton and soybean respectively. The high thermostability, wide pH stability, and cheap nitrogen source show well potential use for composting treatment and commercial detergents. 展开更多
关键词 ACTINOMYCETES thermomonospora fusca carboxy methyl cellulase (CMCase)
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部