The thick target neutron yields （TTNYs） of deuteron-induced reaction on AI and Cu isotopes are analyzed by combining the improved nuclear models and particle transport effects. The modified Glauber model is employed...The thick target neutron yields （TTNYs） of deuteron-induced reaction on AI and Cu isotopes are analyzed by combining the improved nuclear models and particle transport effects. The modified Glauber model is employed mainly to produce the peak of double differential cross section for the breakup process, and the exciton model and the Hauser-Feshbach theory are used for the statistical processes. The thin-layer accumulation method is used to calculate the TTNYs considering the neutron attenuation effects in the target. The calculated results are compared with the existing experimental data, and the analysis method can predict the TTNY data well at the deuteron energy of 40 MeV.展开更多
High energy γ-rays can be used in many fields, such as nuclear waste transmutation, flash photographics, and astrophysics. The13 C(p, γ)14 N resonance reaction was used to generate high energy and mono-energetic γ-...High energy γ-rays can be used in many fields, such as nuclear waste transmutation, flash photographics, and astrophysics. The13 C(p, γ)14 N resonance reaction was used to generate high energy and mono-energetic γ-rays in this work. The thick-target yield of the 9.17-MeV γ-ray from the resonance in this reaction was determined to be(4.7±0.4)×10-9γ/proton,which was measured by a HPGe detector. Meanwhile, the angular distribution of 9.17-MeV γ-ray was also determined.The absolute efficiency of HPGe detector was calibrated using56 Co and152 Eu sources with known radioactive activities and calculated by GEANT4 simulation.展开更多
Neutron energy, fluence rate, angular distributions and dose equivalent rate distributions around the thick Be, Cu, An targets bombarded by 50 MeV/u 18O-ion were measured using a threshold detector activation method. ...Neutron energy, fluence rate, angular distributions and dose equivalent rate distributions around the thick Be, Cu, An targets bombarded by 50 MeV/u 18O-ion were measured using a threshold detector activation method. At the same time,the neutron yields of 18O-ion and the neutron emission rates in the forward direction were obtained approximately.展开更多
The elastic resonance scattering of ^12C＋p has been studied in inverse kinematics via a novel thicktarget method at GIRAFFE facility of HI-13 tandem accelerator laboratory, Beijing. The recoil protons weremeasured by...The elastic resonance scattering of ^12C＋p has been studied in inverse kinematics via a novel thicktarget method at GIRAFFE facility of HI-13 tandem accelerator laboratory, Beijing. The recoil protons weremeasured by a AE-E counter telescope based on a large area double-sided silicon strip detector at laboratoryangles around θ0 = 15^o. The excitation function for ^12C（p,p） elastic scattering has been obtained over a wideenergy range of Ec.m. =0.31-3.45 MeV, which was explained quite well by the R-matrix calculation with known resonance parameters of the first three levels in ^13N nucleus. Thus it is demonstrated that the present setup can be directly applied to the study of elastic resonance scattering with secondary radioactive beams.展开更多
Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protect...Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protected.One-dimensional heat transfer models of a metal plate and imitative material were established to explore the influences of the thermophysical properties of imitative material on the surface temperature difference（STD） between the metal plate and imitative material which were subjected to periodical ambient conditions.It is elucidated that the STD is determined by the imitative material’s dimensionless thickness（dim*,） and the thermal inertia(Pim).When dim* is above 1.0,the STD is invariable as long as Pim is a constant.And if the dimensionless thickness of metal plate（d,m*） is also larger than 1.0,the STD approaches to zero as long as Pimis the same as the thermal inertia of metal plate（Pm）.When dim* is between 0.08 and 1,the STD varies irregularly with Pim and dim*.However,if dm* is also in the range of 0.08-1,the STD approaches to zero on condition that Pim=Pm and dim*= dm*.If dim*,is below 0.08,the STD is unchanged when Pimdim* is a constant.And if dm* is also less than 0.08,the STD approaches to zero as long as Pimdim* = Pmdm*.Furthermore,an applicationoriented discussion indicates that the imitative material can be both light and thin via the application of the phase change material with a preset STD because of its high specific heat capacity during the phase transition process.展开更多
基金Supported by the Project of China Academy of Engineering Physics under Grant No 2013B0103015
文摘The thick target neutron yields （TTNYs） of deuteron-induced reaction on AI and Cu isotopes are analyzed by combining the improved nuclear models and particle transport effects. The modified Glauber model is employed mainly to produce the peak of double differential cross section for the breakup process, and the exciton model and the Hauser-Feshbach theory are used for the statistical processes. The thin-layer accumulation method is used to calculate the TTNYs considering the neutron attenuation effects in the target. The calculated results are compared with the existing experimental data, and the analysis method can predict the TTNY data well at the deuteron energy of 40 MeV.
基金Project supported by the National Natural Science Foundation of China(Grant No.11655003)
文摘High energy γ-rays can be used in many fields, such as nuclear waste transmutation, flash photographics, and astrophysics. The13 C(p, γ)14 N resonance reaction was used to generate high energy and mono-energetic γ-rays in this work. The thick-target yield of the 9.17-MeV γ-ray from the resonance in this reaction was determined to be(4.7±0.4)×10-9γ/proton,which was measured by a HPGe detector. Meanwhile, the angular distribution of 9.17-MeV γ-ray was also determined.The absolute efficiency of HPGe detector was calibrated using56 Co and152 Eu sources with known radioactive activities and calculated by GEANT4 simulation.
文摘Neutron energy, fluence rate, angular distributions and dose equivalent rate distributions around the thick Be, Cu, An targets bombarded by 50 MeV/u 18O-ion were measured using a threshold detector activation method. At the same time,the neutron yields of 18O-ion and the neutron emission rates in the forward direction were obtained approximately.
基金Supported by National Natural Science Foundation of China (10445004, 10575136, 10735100)Major State Basic Research Development Program (2007CB815003)
文摘The elastic resonance scattering of ^12C＋p has been studied in inverse kinematics via a novel thicktarget method at GIRAFFE facility of HI-13 tandem accelerator laboratory, Beijing. The recoil protons weremeasured by a AE-E counter telescope based on a large area double-sided silicon strip detector at laboratoryangles around θ0 = 15^o. The excitation function for ^12C（p,p） elastic scattering has been obtained over a wideenergy range of Ec.m. =0.31-3.45 MeV, which was explained quite well by the R-matrix calculation with known resonance parameters of the first three levels in ^13N nucleus. Thus it is demonstrated that the present setup can be directly applied to the study of elastic resonance scattering with secondary radioactive beams.
基金funded by the National Natural Science Foundation of China (No. 51576188)
文摘Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protected.One-dimensional heat transfer models of a metal plate and imitative material were established to explore the influences of the thermophysical properties of imitative material on the surface temperature difference（STD） between the metal plate and imitative material which were subjected to periodical ambient conditions.It is elucidated that the STD is determined by the imitative material’s dimensionless thickness（dim*,） and the thermal inertia(Pim).When dim* is above 1.0,the STD is invariable as long as Pim is a constant.And if the dimensionless thickness of metal plate（d,m*） is also larger than 1.0,the STD approaches to zero as long as Pimis the same as the thermal inertia of metal plate（Pm）.When dim* is between 0.08 and 1,the STD varies irregularly with Pim and dim*.However,if dm* is also in the range of 0.08-1,the STD approaches to zero on condition that Pim=Pm and dim*= dm*.If dim*,is below 0.08,the STD is unchanged when Pimdim* is a constant.And if dm* is also less than 0.08,the STD approaches to zero as long as Pimdim* = Pmdm*.Furthermore,an applicationoriented discussion indicates that the imitative material can be both light and thin via the application of the phase change material with a preset STD because of its high specific heat capacity during the phase transition process.
