Finite element simulation of welded thin-walled stainless steel container based on SYSWELD

The temperature field and stress fields of 18 - 8 stainless steel container structure were computed during and after tungsten inert gas （TIG） arc welding based on the SYSWELD software. The convection, radiation and conduction were all considered during the simulation process as well as temperature-dependent material properties. The results show that the peak temperature occurs on the heat source location. Steep temperature gradients are observed ahead of the heat source. Axial tensile stress and hoop compressive stress are observed in the weld seam between cylinder and head. Axial compressive stress and hoop tensile stress are observed near the weld seam between cylinder and heads. Axial compressive stress and hoop tensile stress are observed in the axial weld seam of cylinder. Axial tensile stress and hoop compressive stress are observed near the axial weld seam of cylinder. The aim of the above research is to provide a basic theory and some calculation methods for the thin-walled container welding technology so that the failures of these structures in service due to residual stresses may be minimized.

Optimization of Fixture Number in Large Thin-Walled Parts Assembly Based on IPSO

There are lots of researches on fixture layout optimization for large thin-walled parts.Current researches focus on the positioning problem,i.e.,optimizing the positions of a constant number of fixtures.However,how to determine the number of fixtures is ignored.In most cases,the number of fixtures located on large thin-walled parts is determined based on engineering experience,which leads to huge fixture number and extra waste.Therefore,this paper constructs an optimization model to minimize the number of fixtures.The constraints are set in the optimization model to ensure that the part deformation is within the surface profile tolerance.In addition,the assembly gap between two parts is also controlled.To conduct the optimization,this paper develops an improved particle swarm optimization(IPSO)algorithm by integrating the shrinkage factor and adaptive inertia weight.In the algorithm,particles are encoded according to the fixture position.Each dimension of the particle is assigned to a sub-region by constraining the optional position range of each fixture to improve the optimization efficiency.Finally,a case study on ship curved panel assembly is provided to prove that our method can optimize the number of fixtures while meeting the assembly quality requirements.This research proposes a method to optimize the number of fixtures,which can reduce the number of fixtures and achieve deformation control at the same time.

Development of Fixture Layout Optimization for Thin-Walled Parts:A Review

An increasing number of researchers have researched fixture layout optimization for thin-walled part assembly during the past decades.However,few papers systematically review these researches.By analyzing existing literature,this paper summarizes the process of fixture layout optimization and the methods applied.The process of optimization is made up of optimization objective setting,assembly variation/deformation modeling,and fixture layout optimization.This paper makes a review of the fixture layout for thin-walled parts according to these three steps.First,two different kinds of optimization objectives are introduced.Researchers usually consider in-plane variations or out-of-plane deformations when designing objectives.Then,modeling methods for assembly variation and deformation are divided into two categories:Mechanism-based and data-based methods.Several common methods are discussed respectively.After that,optimization algorithms are reviewed systematically.There are two kinds of optimization algorithms:Traditional nonlinear programming and heuristic algorithms.Finally,discussions on the current situation are provided.The research direction of fixture layout optimization in the future is discussed from three aspects:Objective setting,improving modeling accuracy and optimization algorithms.Also,a new research point for fixture layout optimization is discussed.This paper systematically reviews the research on fixture layout optimization for thin-walled parts,and provides a reference for future research in this field.

Meter-Scale Thin-Walled Structure with Lattice Infill for Fuel Tank Supporting Component of Satellite:Multiscale Design and Experimental Verification

Lightweight thin-walled structures with lattice infill are widely desired in satellite for their high stiffness-to-weight ratio and superior buckling strength resulting fromthe sandwich effect.Such structures can be fabricated bymetallic additive manufacturing technique,such as selective laser melting(SLM).However,the maximum dimensions of actual structures are usually in a sub-meter scale,which results in restrictions on their appliance in aerospace and other fields.In this work,a meter-scale thin-walled structure with lattice infill is designed for the fuel tank supporting component of the satellite by integrating a self-supporting lattice into the thickness optimization of the thin-wall.The designed structure is fabricated by SLM of AlSi10Mg and cold metal transfer welding technique.Quasi-static mechanical tests and vibration tests are both conducted to verify the mechanical strength of the designed large-scale lattice thin-walled structure.The experimental results indicate that themeter-scale thin-walled structure with lattice infill could meet the dimension and lightweight requirements of most spacecrafts.

Numerical Analysis of Cold-Formed Thin-Walled Steel Short Columns with Pitting Corrosion during Bridge Construction

Pitting corrosion is harmful during bridge construction,which will lead to uneven roughness of steel surfaces and reduce the thickness of steel.Hence,the effect of pitting corrosion on the mechanical properties of cold-formed thin-walled steel stub columns is studied,and the empirical formulas are established through regression fitting to predict the ultimate load of web and flange under pitting corrosion.In detail,the failure modes and load-displacement curves of specimens with different locations,area ratios,and depths are obtained through a large number of non-linear finite element analysis.As for the specimens with pitting corrosion on the web,all the specimens are subject to local buckling failure,and the failure mode will not change with pitting corrosion,but the failure location will change with pitting corrosion location;the size,location,and area ratio of pitting corrosion have little influence on the ultimate load of cold-formed thin-walled steel short columns,but the loss rate of pitting corrosion section area has a greater impact on the ultimate bearing capacity.As for the specimen with flange pitting corrosion,the location and area ratio of pitting corrosion have less influence on the ultimate load of cold-formed thin-walled steel short columns,and the section area loss rate has greater influence on the ultimate bearing capacity;the impact of web pitting corrosion on the ultimate load is greater than that of flange pitting corrosion under the same condition of pitting corrosion section area.The prediction formulas of limit load which are suitable for pitting corrosion of web and flange are established,which can provide a reference for performance evaluation of corroded cold-formed thin-walled steel.

Improved STNModels and Heuristic Rules for Cooperative Scheduling in Automated Container Terminals

Improving the cooperative scheduling efficiency of equipment is the key for automated container terminals to copewith the development trend of large-scale ships. In order to improve the solution efficiency of the existing spacetimenetwork (STN) model for the cooperative scheduling problem of yard cranes (YCs) and automated guidedvehicles (AGVs) and extend its application scenarios, two improved STN models are proposed. The flow balanceconstraints in the original model are decomposed, and the trajectory constraints of YCs and AGVs are added toacquire the model STN_A. The coupling constraint in STN_A is updated, and buffer constraints are added toSTN_A so that themodel STN_B is built.As the size of the problem increases, the solution speed of CPLEX becomesthe bottleneck. So a heuristic method containing three groups of heuristic rules is designed to obtain a near-optimalsolution quickly. Experimental results showthat the computation time of STN_A is shortened by 49.47% on averageand the gap is reduced by 1.69% on average compared with the original model. The gap between the solution ofthe heuristic rules and the solution of CPLEX is less than 3.50%, and the solution time of the heuristic rules is onaverage 99.85% less than the solution time of CPLEX. Compared with STN_A, the computation time for solvingSTN_B increases by 58.93% on average.

A Pre-Selection-Based Ant Colony System for Integrated Resources Scheduling Problem at Marine Container Terminal

Marine container terminal(MCT)plays a key role in the marine intelligent transportation system and international logistics system.However,the efficiency of resource scheduling significantly influences the operation performance of MCT.To solve the practical resource scheduling problem(RSP)in MCT efficiently,this paper has contributions to both the problem model and the algorithm design.Firstly,in the problem model,different from most of the existing studies that only consider scheduling part of the resources in MCT,we propose a unified mathematical model for formulating an integrated RSP.The new integrated RSP model allocates and schedules multiple MCT resources simultaneously by taking the total cost minimization as the objective.Secondly,in the algorithm design,a pre-selection-based ant colony system(PACS)approach is proposed based on graphic structure solution representation and a pre-selection strategy.On the one hand,as the RSP can be formulated as the shortest path problem on the directed complete graph,the graphic structure is proposed to represent the solution encoding to consider multiple constraints and multiple factors of the RSP,which effectively avoids the generation of infeasible solutions.On the other hand,the pre-selection strategy aims to reduce the computational burden of PACS and to fast obtain a higher-quality solution.To evaluate the performance of the proposed novel PACS in solving the new integrated RSP model,a set of test cases with different sizes is conducted.Experimental results and comparisons show the effectiveness and efficiency of the PACS algorithm,which can significantly outperform other state-of-the-art algorithms.

Boundary Element Analysis forModeⅢCrack Problems of Thin-Walled Structures from Micro-to Nano-Scales

This paper develops a new numerical framework for modeⅢcrack problems of thin-walled structures by integrating multiple advanced techniques in the boundary element literature.The details of special crack-tip elements for displacement and stress are derived.An exponential transformation technique is introduced to accurately calculate the nearly singular integral,which is the key task of the boundary element simulation of thin-walled structures.Three numerical experiments with different types of cracks are provided to verify the performance of the present numerical framework.Numerical results demonstrate that the present scheme is valid for modeⅢcrack problems of thin-walled structures with the thickness-to-length ratio in the microscale,even nanoscale,regime.

Container-Based Internet of Vehicles Edge Application Migration Mechanism

Internet of Vehicles(IoV)applications integrating with edge com-puting will significantly drive the growth of IoV.However,the contradiction between the high-speed mobility of vehicles,the delay sensitivity of corre-sponding IoV applications and the limited coverage and resource capacity of distributed edge servers will pose challenges to the service continuity and stability of IoV applications.IoV application migration is a promising solution that can be supported by application containerization,a technology for seamless cross-edge-server application migration without user perception.Therefore,this paper proposes the container-based IoV edge application migration mechanism,consisting of three parts.The first is the migration trigger determination algorithm for cross-border migration and service degra-dation migration,respectively,based on trajectory prediction and traffic awareness to improve the determination accuracy.The second is the migration target decision calculation model for minimizing the average migration time and maximizing the average service time to reduce migration times and improve the stability and adaptability of migration decisions.The third is the migration decision algorithm based on the improved artificial bee colony algorithm to avoid local optimal migration decisions.Simulation results show that the proposed migration mechanism can reduce migration times,reduce average migration time,improve average service time and enhance the stability and adaptability of IoV application services.

“Smart”micro/nano container-based self-healing coatings on magnesium alloys:A review

Coating technologies are a commonly used way to protect metals against corrosion.However,with more and more severe service environments of materials,many protective coating systems often are not environmentally friendly or toxic as in the case of chromates.Based on the world’s abundant ideal magnesium(Mg)and its alloy,the smart self-healing anticorrosive coating can autonomously restore the damaged part of the coating according to the environmental changes,strengthen the corrosion protection ability,and prolong its service life.This paper reviews the research progress of smart self-healing coatings on Mg alloys.These coatings mostly contain suitable corrosion inhibitors encapsulated into micro/nano containers.Moreover,the different self-healing mechanisms and functionalities of micro/nano containers are discussed.The micro/nano containers range from inorganic nanocontainers such as mesoporous nanoparticles(silica(SiO_(2)),titanium dioxide(TiO_(2)),etc.),over inorganic clays(halloysite,hydrotalcite-like,zeolite),to organic nanocontainers such as polymer microcapsules,nanofibers,chitosan(CS)and cyclodextrin(CD),as well as,carbon materials such as graphene and carbon nanotubes and hybrids such as metal organic frameworks.The functioning of micro/nano containers can be divided in two principal groups:autonomous(based on defect filling and corrosion inhibition)and non-autonomous(based on dynamic bonds and shape memory polymers).Moreover,multi functionalities and composite applications of various micro/nano containers are summarized.At present,significant progress has been made in the preparation methods and technologies of micro/nano containers.Achieving long-term self-healing properties of coatings sensing of coating failure and early warning after self-healing function failure can be expected as the main development direction of self-healing corrosion protection coatings in the future.

Vertical Pod Autoscaling in Kubernetes for Elastic Container Collaborative Framework

Kubernetes is an open-source container management tool which automates container deployment,container load balancing and container(de)scaling,including Horizontal Pod Autoscaler(HPA),Vertical Pod Autoscaler(VPA).HPA enables flawless operation,interactively scaling the number of resource units,or pods,without downtime.Default Resource Metrics,such as CPU and memory use of host machines and pods,are monitored by Kubernetes.Cloud Computing has emerged as a platform for individuals beside the corporate sector.It provides cost-effective infrastructure,platform and software services in a shared environment.On the other hand,the emergence of industry 4.0 brought new challenges for the adaptability and infusion of cloud computing.As the global work environment is adapting constituents of industry 4.0 in terms of robotics,artificial intelligence and IoT devices,it is becoming eminent that one emerging challenge is collaborative schematics.Provision of such autonomous mechanism that can develop,manage and operationalize digital resources like CoBots to perform tasks in a distributed and collaborative cloud environment for optimized utilization of resources,ensuring schedule completion.Collaborative schematics are also linked with Bigdata management produced by large scale industry 4.0 setups.Different use cases and simulation results showed a significant improvement in Pod CPU utilization,latency,and throughput over Kubernetes environment.

Geometric Accuracy and Energy Absorption Characteristics of 3D Printed Continuous Ramie Fiber Reinforced Thin-Walled Composite Structures

The application of continuous natural fibers as reinforcement in composite thin-walled structures offers a feasible approach to achieve light weight and high strength while remaining environmentally friendly.In addition,additive manufacturing technology provides a favorable process foundation for its realization.In this study,the printability and energy absorption properties of 3D printed continuous fiber reinforced thin-walled structures with different configurations were investigated.The results suggested that a low printing speed and a proper layer thickness would mitigate the printing defects within the structures.The printing geometry accuracy of the structures could be further improved by rounding the sharp corners with appropriate radii.This study successfully fabricated structures with vari-ous configurations characterized by high geometric accuracy through printing parameters optimization and path smoothing.Moreover,the compressive property and energy absorption characteristics of the structures under quasi-static axial compression were evaluated and compared.It was found that all studied thin-walled structures exhibited progressive folding deformation patterns during compression.In particular,energy absorption process was achieved through the combined damage modes of plastic deformation,fiber pullout and delamination.Furthermore,the com-parison results showed that the hexagonal structure exhibited the best energy absorption performance.The study revealed the structure-mechanical property relationship of 3D printed continuous fiber reinforced composite thin-walled structures through the analysis of multiscale failure characteristics and load response,which is valuable for broadening their applications.

Nonlinear semi-analytical modeling of liquid sloshing in rectangular container with horizontal baffles

A nonlinear semi-analytical scheme is proposed for investigating the finiteamplitude nonlinear sloshing in a horizontally baffled rectangular liquid container under the seismic excitation.The sub-domain method is developed to analytically derive the modal behaviors of the baffled linear sloshing.The viscosity dissipation effects from the interior liquid and boundary layers are considered.With the introduction of the generalized time-dependent coordinates,the surface wave elevation and velocity potential are represented by a series of linear modal eigenfunctions.The infinite-dimensional modal system of the nonlinear sloshing is formulated based on the Bateman-Luke variational principle,which is further reduced to the finite-dimensional modal system by using the NarimanovMoiseev asymptotic ordering.The base force and overturning moment induced by the nonlinear sloshing are derived as the functions of the generalized time-dependent coordinates.The present results match well with the available analytical,numerical,and experimental results.The paper examines the surface wave elevation,base force,and overturning moment versus the baffle parameters and excitation amplitude in detail.

Container Instrumentation and Enforcement System for Runtime Security of Kubernetes Platform with eBPF

Containerization is a fundamental component of modern cloud-native infrastructure,and Kubernetes is a prominent platform of container orchestration systems.However,containerization raises significant security concerns due to the nature of sharing a kernel among multiple containers,which can lead to container breakout or privilege escalation.Kubernetes cannot avoid it as well.While various tools,such as container image scanning and configuration checking,can mitigate container workload vulnerabilities,these are not foolproof and cannot guarantee perfect isolation or prevent every active threat in runtime.As such,a policy enforcement solution is required to tackle the problem,and existing solutions based on LSM(Linux Security Module)frameworks may not be adequate for some situations.To address this,we propose an enforcement system based on BPF-LSM,which leverages eBPF(extended Berkeley Packet Filter)technology to provide fine-grained control and dynamic adoption of security policies.In this paper,we compare different LSM implementations to highlight the challenges of current enforcement solutions before detailing the design of our eBPF-based Kubernetes Runtime Instrumentation and Enforcement System(KRSIE).Finally,we evaluate the effectiveness of our system using a real-world scenario,as measuring the performance of a policy enforcement system is a complex task.Our results show that KRSIE can successfully control containers’behaviors using LSM hooks at container runtime,offering improved container security for cloud-native infrastructure.

Container Based Nomadic Vehicular Cloud Using Cell Transmission Model

Nomadic Vehicular Cloud(NVC)is envisaged in this work.The predo-minant aspects of NVC is,it moves along with the vehicle that initiates it and functions only with the resources of moving vehicles on the heavy traffic road without relying on any of the static infrastructure and NVC decides the initiation time of container migration using cell transmission model(CTM).Containers are used in the place of Virtual Machines(VM),as containers’features are very apt to NVC’s dynamic environment.The specifications of 5G NR V2X PC5 interface are applied to NVC,for the feature of not relying on the network coverage.Nowa-days,the peak traffic on the road and the bottlenecks due to it are inevitable,which are seen here as the benefits for VC in terms of resource availability and residual in-network time.The speed range of high-end vehicles poses the issue of dis-connectivity among VC participants,that results the container migration failure.As the entire VC participants are on the move,to maintain proximity of the containers hosted by them,estimating their movements plays a vital role.To infer the vehicle movements on the road stretch and initiate the container migration prior enough to avoid the migration failure due to vehicles dynamicity,this paper proposes to apply the CTM to the container based and 5G NR V2X enabled NVC.The simulation results show that there is a significant increase in the success rate of vehicular cloud in terms of successful container migrations.

Scale Breeding and Reproduction Technique of Ficus tikoua Bur.Container Seedlings

Based on the principle of asexual reproduction,a kind of scale breeding and reproduction technique of Ficus tikoua Bur.container seedlings was explored by using the characteristics of strong adaptability to the environment and fast growth and reproduction.Using non-woven bag as a breeding container for seedlings,the scale breeding and reproduction technique of F.tikoua container seedlings was summarized through the important links of seedling bed construction,seedling collection,soil configuration,container selection,cutting cultivation,field management,and disease and pest control.This technique can achieve differential,massive and sustainable efficient breeding and reproduction of F.tikoua seedlings in a short time.

Experimental Study on Entropy Features in Machining Vibrations of A Thin-Walled Tubular Workpiece

In machining processes,chatter vibrations are always regarded as one of the major limitations for production quality and efficiency.Accurate and timely monitoring of chatter is helpful to maintain stable machining operations.At present,most chatter monitoring methods are based on the energy level at specified chatter frequencies or frequency bands.However,the spectral features of chatter could change during machining operations due to complexity and time-varying dynamics of the physical machining process.The purpose of this paper is to investigate the time-varying chatter features in turning of thin-walled tubular workpieces from the perspective of entropy.The airborne acoustics was selected as the source of information for machining condition monitoring.First,corresponding to the distinguishing surface topographies relevant to machining conditions,the features of the sound signal emitted during turning of the thin-walled cylindrical workpieces were extracted using the spectral analysis and wavelet packet transform,respectively.It was shown that the dominant vibration frequency as well as the energy distribution could shift with the transition of the machining status.After that,two relative entropy indicators based on the spectrum and the wavelet packet energy were constructed to identify chattering events in turning of the thin-walled tubes.The experimental results demonstrate that the proposed indicators could accurately reflect the transition of machining conditions with high sensitivity and robustness in comparison with the traditional FFT-based methods.The achievement of this study lays the foundations of the online chatter monitoring and control technique for turning of the thin-walled tubular workpieces.

Effect of forging on the microstructure and texture of a high Nb containing γ-TiAl alloy

The effect of forging on the microstructure and texture evolution of a high Nb containing Ti-45Al-7Nb-0.3W(at.%)alloy was investigated by X-ray diffractometer(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).The results show that the as-cast alloy is mainly composed of α_(2)/γ lamellar colonies with a mean size of 70μm,but the hot-forged pancake displays a near duplex microstructure(DP).Kinking and bending of lamellar colonies,deformation twinning and dynamic recrystallization(DRX)occur during hot forging.Meanwhile,dense dislocations in theβphase after forging suggest that the high-temperature β phase with a disordered structure is favorable for improving the hot-workability of the alloy.Unlike the common TiAl casting texture,the solidification process of the investigated as-cast alloy with high Nb content is completely via the β phase region,resulting in the formation of a<110>γ fiber texture where the<110>γ aligns parallel to the heat-flow direction.In comparison,the relatively strong<001>and weak<302>texture components in the as-forged alloy are attributed to the deformation twinning.After annealing,static recrystallization occurs at the twin boundary and intersections,which weakens the deformation texture.

Adaptive Event-Triggered Time-Varying Output Group Formation Containment Control of Heterogeneous Multiagent Systems

In this paper,a class of time-varying output group formation containment control problem of general linear hetero-geneous multiagent systems(MASs)is investigated under directed topology.The MAS is composed of a number of tracking leaders,formation leaders and followers,where two different types of leaders are used to provide reference trajectories for movement and to achieve certain formations,respectively.Firstly,compen-sators are designed whose states are estimations of tracking lead-ers,based on which,a controller is developed for each formation leader to accomplish the expected formation.Secondly,two event-triggered compensators are proposed for each follower to evalu-ate the state and formation information of the formation leaders in the same group,respectively.Subsequently,a control protocol is designed for each follower,utilizing the output information,to guide the output towards the convex hull generated by the forma-tion leaders within the group.Next,the triggering sequence in this paper is decomposed into two sequences,and the inter-event intervals of these two triggering conditions are provided to rule out the Zeno behavior.Finally,a numerical simulation is intro-duced to confirm the validity of the proposed results.

High patatin like phospholipase domain containing 8 expression as a biomarker for poor prognosis of colorectal cancer

BACKGROUND Patatin like phospholipase domain containing 8(PNPLA8)has been shown to play a significant role in various cancer entities.Previous studies have focused on its roles as an antioxidant and in lipid peroxidation.However,the role of PNPLA8 in colorectal cancer(CRC)progression is unclear.AIM To explore the prognostic effects of PNPLA8 expression in CRC.METHODS A retrospective cohort containing 751 consecutive CRC patients was enrolled.PNPLA8 expression in tumor samples was evaluated by immunohistochemistry staining and semi-quantitated with immunoreactive scores.CRC patients were divided into high and low PNPLA8 expression groups based on the cut-off va-lues,which were calculated by X-tile software.The prognostic value of PNPLA8 was identified using univariate and multivariate Cox regression analysis.The over-all survival(OS)rates of CRC patients in the study cohort were compared with Kaplan-Meier analysis and Log-rank test.RESULTS PNPLA8 expression was significantly associated with distant metastases in our cohort(P=0.048).CRC patients with high PNPLA8 expression indicated poor OS(median OS=35.3,P=0.005).CRC patients with a higher PNPLA8 expression at either stage I and II or stage III and IV had statistically significant shorter OS.For patients with left-sided colon and rectal cancer,the survival curves of two PN-PLA8-expression groups showed statistically significant differences.Multivariate analysis also confirmed that high PNPLA8 expression was an independent prog-nostic factor for overall survival(hazard ratio HR=1.328,95%CI:1.016-1.734,P=0.038).