Sedimentary Facies Architectures of Third-Order Sequences from Early to Middle Triassic in Nanpanjiang Basin

There are complex and regular changes on sedimentary facies from the Early to the Middle Triassic in the Nanpanjiang basin. After the obvious drowned event of carbonate platforms in the transitional period between Permian and Triassic, carbonate platforms have evolved into the ramp type from the rimmed shelf type. The differentiation of sedimentary facies becomes clearer in space, which are marked by the changes from an attached platform to a turbidity basin and several isolated platforms in the basin. The striking characteristics are the development of oolitic banks on isolated platforms in Nanning and Jingxi and the reef and bank limestones in the margin of the attached platform in the Early Triassic. Despite the difference of the time span and the architecture of facies succession of third order sedimentary sequences, the process of the third order relative sea level changes reflected by the sedimentary facies succession of the third order sequences is generally synchronous. Therefore, six third order sequences could be discerned in the strata from the Early to the Middle Triassic in the Nanpanjiang basin. Using two types of facies changing surfaces and two types of diachronisms in stratigraphic records as the key elements, the sedimentary facies architectures of the third order sequences that represent sequence stratigraphic frameworks from the Early to the Middle Triassic in the Nanpanjiang basin could be constructed.

Development characteristics of the third-order sequence of Upper Devonian–Lower Carboniferous shore-mixed shelf in Tarim Basin, NW China

Based on the study of stratigraphic sedimentary facies of the prototype sedimentary basin formed in the Late Devonian to Permian Period in the Tarim Basin, the prototype sedimentary basin are divided into five order sequences according to the theory of sequence stratigraphy. It is considered that the Upper Devonian–Lower Carboniferous shore-mixing shelf in the lower part of the prototype sedimentary basin is a typical third-order sequence and a sequence development model is established. The third-order sequence is actually a transgression systems tract and highstand systems tract cycle assemblage, and the type I sequence(no lowstand systems tract) is a typical developmental mode of the third order sequence, and the identification mark is the existence of huge mudstone and limestone wedges from sea to land. The fifth-order parasequence is the basic sequence, which is a single cycle sequence. The thin layer limestone isochronous sediments, which are easy to be identified in the mixed shelf areas, are the isochronous sediments of the largest or secondary marine-flooding surface. The mixed shelf area belongs to the equilibrium sedimentary profile of internal and external sediments, and there is no condensed section. The inclined deposition phenomenon of extraneous source sediments in the sea area weakens or disappears in the mixed shelf area. The paleogeomorphology at the bottom of the third-order sequence is a terrace-slope break zone. This paleogeomorphological feature is not only the main reason for the sedimentary diachronism of Donghe sandstone, but also the main reason for the formation of the transgression-highstand fourth-order cyclic sequences of the Donghe sandstone section and its upper gravel-bearing sandstone section.

Facies-succession and architecture of the third-order sequences and their stratigraphic framework of the Devonian in Yunnan-Guizhou-Guangxi area,South China

The Caledonian orogeny at the end of the Silurian resulted in great changes in the palaeogeography in the Yunnan-Guizhou-Guangxi area of South China; the continental area of the Early Paleozoic evolved into the extensive Dian-Qian-Gui Sea in the Late Paleo-zoic. Early in the Devonian, as a result of a major transgression, seawater encroached gradually from the south to the north and clastic facies were deposited. Carbonate deposition was then established in the Yunnan-Guizhou-Guangxi area, with a palaeogeography marked by attached platforms, isolated platforms and narrow basins. As a result of the Ziyun movement towards the end of the Devonian, the Upper Devonian strata are regressive and thin out from the open-sea to the land areas. A study of the nature and distribution of sedimentary facies in space and time recognises 13 third-order sequences in the Devonian strata in Yunnan-Guizhou-Guangxi area, and these form two second-order sequences. The strata of the Lower Devonian comprise 5 third-order sequences (SQ1 to SQ5 ), which are dominated by transgressive clastics. 4 third-order sequences (SQ6 to SQ9 ) in the Middle Devonian are characterized by alternations of transgressive clastics and highstand carbonates. In the Upper Devonian, carbonates constitute 4 third-order sequences (SQ10 to SQ13 ), which are generally marked by the transgressive limestones and highstand dolomites. On the basis of earlier biostratigraphic studies, sea-level changes represented by the third-order sequences with their different facies successions are explored, and the sequence stratigraphic framework is established. There-fore, the Devonian strata in the study area provide an example for further understanding of depositional trends within the sequence-stratigraphic framework.

Mitochondrial targeting sequence of magnetoreceptor MagR:More than just targeting

Iron-sulfur clusters(ISC)are essential cofactors for proteins involved in various biological processes,such as electron transport,biosynthetic reactions,DNA repair,and gene expression regulation.ISC assembly protein IscA1(or MagR)is found within the mitochondria of most eukaryotes.Magnetoreceptor(MagR)is a highly conserved A-type iron and iron-sulfur cluster-binding protein,characterized by two distinct types of iron-sulfur clusters,[2Fe-2S]and[3Fe-4S],each conferring unique magnetic properties.MagR forms a rod-like polymer structure in complex with photoreceptive cryptochrome(Cry)and serves as a putative magnetoreceptor for retrieving geomagnetic information in animal navigation.Although the N-terminal sequences of MagR vary among species,their specific function remains unknown.In the present study,we found that the N-terminal sequences of pigeon MagR,previously thought to serve as a mitochondrial targeting signal(MTS),were not cleaved following mitochondrial entry but instead modulated the efficiency with which iron-sulfur clusters and irons are bound.Moreover,the N-terminal region of MagR was required for the formation of a stable MagR/Cry complex.Thus,the N-terminal sequences in pigeon MagR fulfil more important functional roles than just mitochondrial targeting.These results further extend our understanding of the function of MagR and provide new insights into the origin of magnetoreception from an evolutionary perspective.

Broadband third-order optical nonlinearities of layered franckeite towards mid-infrared regime

The study of nonlinear optical responses in the mid-infrared(mid-IR)regime is essential for advancing ultrafast mid-IR laser applications.However,nonlinear optical effects under mid-IR excitation are rarely reported due to the lack of suitable nonlinear optical materials.The natural van derWaals heterostructure franckeite,known for its narrow bandgap and stability in air,shows great potential for developing mid-IR nonlinear optical devices.We have experimentally demonstrated that layered franckeite exhibits a broadband wavelength-dependent nonlinear optical response in the mid-IR spectral region.Franckeite nanosheets were prepared using a liquid-phase exfoliation method,and their nonlinear optical response was characterized in the spectral range of 3000 nm to 5000 nm.The franckeite nanosheets exhibit broadband wavelengthdependent third-order nonlinearities,with nonlinear absorption and refraction coefficients estimated to be about 10^(-7)cm/W and 10^(-11)cm^(2)/W,respectively.Additionally,a passively Q-switched fluoride fiber laser operating around a wavelength of 2800 nm was achieved,delivering nanosecond pulses with a signal-to-noise ratio of 43.6 dB,based on the nonlinear response of franckeite.These findings indicate that layered franckeite possesses broadband nonlinear optical characteristics in the mid-IR region,potentially enabling new possibilities for mid-IR photonic devices.

The Application of Nicotiana benthamiana as a Transient Expression Host to Clone the Coding Sequences of Plant Genes

Coding sequences (CDS) are commonly used for transient gene expression, in yeast two-hybrid screening, to verify protein interactions and in prokaryotic gene expression studies. CDS are most commonly obtained using complementary DNA (cDNA) derived from messenger RNA (mRNA) extracted from plant tissues and generated by reverse transcription. However, some CDS are difficult to acquire through this process as they are expressed at extremely low levels or have specific spatial and/or temporal expression patterns in vivo. These challenges require the development of alternative CDS cloning technologies. In this study, we found that the genomic intron-containing gene coding sequences (gDNA) from Arabidopsis thaliana, Oryza sativa, Brassica napus, and Glycine max can be correctly transcribed and spliced into mRNA in Nicotiana benthamiana. In contrast, gDNAs from Triticum aestivum and Sorghum bicolor did not function correctly. In transient expression experiments, the target DNA sequence is driven by a constitutive promoter. Theoretically, a sufficient amount of mRNA can be extracted from the N. benthamiana leaves, making it conducive to the cloning of CDS target genes. Our data demonstrate that N. benthamiana can be used as an effective host for the cloning CDS of plant genes.

Pig pangenome graph reveals functional features of non‑reference sequences

Background The reliance on a solitary linear reference genome has imposed a significant constraint on our compre-hensive understanding of genetic variation in animals.This constraint is particularly pronounced for non-reference sequences(NRSs),which have not been extensively studied.Results In this study,we constructed a pig pangenome graph using 21 pig assemblies and identified 23,831 NRSs with a total length of 105 Mb.Our findings revealed that NRSs were more prevalent in breeds exhibiting greater genetic divergence from the reference genome.Furthermore,we observed that NRSs were rarely found within coding sequences,while NRS insertions were enriched in immune-related Gene Ontology terms.Notably,our investigation also unveiled a close association between novel genes and the immune capacity of pigs.We observed substantial differences in terms of frequencies of NRSs between Eastern and Western pigs,and the heat-resistant pigs exhibited a substantial number of NRS insertions in an 11.6 Mb interval on chromosome X.Additionally,we discovered a 665 bp insertion in the fourth intron of the TNFRSF19 gene that may be associated with the ability of heat tolerance in South-ern Chinese pigs.Conclusions Our findings demonstrate the potential of a graph genome approach to reveal important functional features of NRSs in pig populations.

Phylogenetic, phylogeographic and divergence time analysis of Anopheles subpictus species complex using ITS2 and COI sequences

Objective:To address the phylogenetic and phylogeographic relationship between different lineages of Anopheles(An.)subpictus species complex in most parts of the Asian continent by maximum utilization of Internal Transcriber Spacer 2(ITS2)and cytochrome C oxidase I(COI)sequences deposited at the GenBank.Methods:Seventy-five ITS2,210 COI and 26 concatenated sequences available in the NCBI database were used.Phylogenetic analysis was performed using Bayesian likelihood trees,whereas median-joining haplotype networks and time-scale divergence trees were generated for phylogeographic analysis.Genetic diversity indices and genetic differentiation were also calculated.Results:Two genetically divergent molecular forms of An.subpictus species complex corresponding to sibling species A and B are established.Species A evolved around 37-82 million years ago in Sri Lanka,India,and the Netherlands,and species B evolved around 22-79 million years ago in Sri Lanka,India,and Myanmar.Vietnam,Thailand,and Cambodia have two molecular forms:one is phylogenetically similar to species B.Other forms differ from species A and B and evolved recently in the above mentioned countries,Indonesia and the Philippines.Genetic subdivision among Sri Lanka,India,and the Netherlands is almost absent.A substantial genetic differentiation was obtained for some populations due to isolation by large geographical distances.Genetic diversity indices reveal the presence of a long-established stable mosquito population,at mutation-drift equilibrium,regardless of population fluctuations.Conclusions:An.subpictus species complex consists of more than two genetically divergent molecular forms.Species A is highly divergent from the rest.Sri Lanka and India contain only species A and B.

On power series statistical convergence and new uniform integrability of double sequences

In the present paper,we mostly focus on P_(p)^(2)-statistical convergence.We will look into the uniform integrability via the power series method and its characterizations for double sequences.Also,the notions of P_(p)^(2)-statistically Cauchy sequence,P_(p)^(2)-statistical boundedness and core for double sequences will be described in addition to these findings.

A cloud model target damage effectiveness assessment algorithm based on spatio-temporal sequence finite multilayer fragments dispersion

To solve the problem of target damage assessment when fragments attack target under uncertain projectile and target intersection in an air defense intercept,this paper proposes a method for calculating target damage probability leveraging spatio-temporal finite multilayer fragments distribution and the target damage assessment algorithm based on cloud model theory.Drawing on the spatial dispersion characteristics of fragments of projectile proximity explosion,we divide into a finite number of fragments distribution planes based on the time series in space,set up a fragment layer dispersion model grounded in the time series and intersection criterion for determining the effective penetration of each layer of fragments into the target.Building on the precondition that the multilayer fragments of the time series effectively assail the target,we also establish the damage criterion of the perforation and penetration damage and deduce the damage probability calculation model.Taking the damage probability of the fragment layer in the spatio-temporal sequence to the target as the input state variable,we introduce cloud model theory to research the target damage assessment method.Combining the equivalent simulation experiment,the scientific and rational nature of the proposed method were validated through quantitative calculations and comparative analysis.

The Upper Jurassic sediments,Marib-Shabwa Basin,Yemen:Lithofacies aspects and sequence stratigraphic analysis

The present study is devoted to understanding the evolution of the Upper Jurassic Sab'atayn Formation in the Marib-Shabwa Basin,Yemen,through a sequence stratigraphic analysis based on integrating datasets of sedimentology,seismic sections,and well logs.The Sab'atayn Formation(Tithonian age)is represented by a series of clastic and evaporites that were deposited under fluvio-deltaic to prodeltaic settings.It is divided into four members including Yah(at the base),upwards to Seen,Alif,and Safir at the top.Two third-order depositional sequences were determined for the Tithonian succession which were separated by three sequence boundaries.These sequences were classified into their systems tracts signifying several sedimentation patterns of progradational,aggradational,and retrogradational parasequence sets.The first depositional sequence corresponds to the early-middle Tithonian Yah and Seen units that can be classified into lowstand,transgressive,and highstand systems tracts.The second sequence comprises the late Tithonian Alif unit that can be subdivided into transgressive and highstand systems tracts.The sandy deposits of the Alif Member(highstand deposits)represent the most productive hydrocarbon reservoir in the basin.The Upper Jurassic sediments in the study area were resulted from a combination of eustatic and tectonic effects.

Landscape of Sequence Variations in Homologous Copies of FAD2 and FAD3 in Rapeseed(Brassica napus L.)Germplasm with High/Low Linolenic Acid Trait

Genetic manipulation(either restraint or enhancement)of the biosynthesis pathway ofα-linolenic acid(ALA)in seed oil is an important goal in Brassica napus breeding.B.napus is a tetraploid plant whose genome often har-bors four and six homologous copies,respectively,of the two fatty acid desaturases FAD2 and FAD3,which con-trol the last two steps of ALA biosynthesis during seed oil accumulation.In this study,we compared their promoters,coding sequences,and expression levels in three high-ALA inbred lines 2006L,R8Q10,and YH25005,a low-ALA line A28,a low-ALA/high-oleic-acid accession SW,and the wildtype ZS11.The expression levels of most FAD2 and FAD3 homologs in the three high-ALA accessions were higher than those in ZS11 and much higher than those in A28 and SW.The three high-ALA accessions shared similar sequences with the pro-moters and CDSs of BnFAD3.C4 and BnFAD3.A3.In A28 and SW,substitution of three amino acid residues in BnFAD2.A5 and BnFAD2.C5,an absence of BnFAD2.C1 locus,and a 549 bp long deletion on the BnFAD3.A3 promoter were detected.The profile of BnFAD2 mutation in the two low-ALA accessions A28 and SW is different from that reported in previous studies.The mutations in BnFAD3 in the high-ALA accessions are reported for thefirst time.In identifying the sites of these mutations,we provide detailed information to aid the design of mole-cular markers for accelerated breeding schemes.

Secure Transmission of Compressed Medical Image Sequences on Communication Networks Using Motion Vector Watermarking

Medical imaging plays a key role within modern hospital management systems for diagnostic purposes.Compression methodologies are extensively employed to mitigate storage demands and enhance transmission speed,all while upholding image quality.Moreover,an increasing number of hospitals are embracing cloud computing for patient data storage,necessitating meticulous scrutiny of server security and privacy protocols.Nevertheless,considering the widespread availability of multimedia tools,the preservation of digital data integrity surpasses the significance of compression alone.In response to this concern,we propose a secure storage and transmission solution for compressed medical image sequences,such as ultrasound images,utilizing a motion vector watermarking scheme.The watermark is generated employing an error-correcting code known as Bose-Chaudhuri-Hocquenghem(BCH)and is subsequently embedded into the compressed sequence via block-based motion vectors.In the process of watermark embedding,motion vectors are selected based on their magnitude and phase angle.When embedding watermarks,no specific spatial area,such as a region of interest(ROI),is used in the images.The embedding of watermark bits is dependent on motion vectors.Although reversible watermarking allows the restoration of the original image sequences,we use the irreversible watermarking method.The reason for this is that the use of reversible watermarks may impede the claims of ownership and legal rights.The restoration of original data or images may call into question ownership or other legal claims.The peak signal-to-noise ratio(PSNR)and structural similarity index(SSIM)serve as metrics for evaluating the watermarked image quality.Across all images,the PSNR value exceeds 46 dB,and the SSIM value exceeds 0.92.Experimental results substantiate the efficacy of the proposed technique in preserving data integrity.

Optimal mining sequence for coal faces under a bedding slope:insight from landslide prevention

Repetitive mining beneath bedding slopes is identified as a critical factor in geomorphic disturbances, especially landslides and surface subsidence. Prior research has largely concentrated on surface deformation in plains due to multi-seam coal mining and the instability of natural bedding slopes, yet the cumulative impact of different mining sequences on bedding slopes has been less explored. This study combines drone surveys and geological data to construct a comprehensive three-dimensional model of bedding slopes. Utilizing FLAC3D and PFC2D models, derived from laboratory experiments, it simulates stress, deformation, and failure dynamics of slopes under various mining sequences. Incorporating fractal dimension analysis, the research evaluates the stability of slopes in relation to different mining sequences. The findings reveal that mining in an upslope direction minimizes disruption to overlying strata. Initiating extraction from lower segments increases tensile-shear stress in coal pillar overburdens, resulting in greater creep deformation towards the downslope than when starting from upper segments, potentially leading to localized landslides and widespread creep deformation in mined-out areas. The downslope upward mining sequence exhibits the least fractal dimensions, indicating minimal disturbance to both strata and surface. While all five mining scenarios maintain good slope stability under normal conditions, recalibrated stability assessments based on fractal dimensions suggest that downslope upward mining offers the highest stability under rainfall, contrasting with the lower stability and potential instability risks of upslope downward mining. These insights are pivotal for mining operations and geological hazard mitigation in multi-seam coal exploitation on bedding slopes.

3D static modeling and sequence stratigraphy using well logs and seismic data:An example of Abu Roash G member in Bahga oilfield

This research uses both three-dimensional(3D)modeling and geologic well control to piece back together the architectural parts of the Late Cretaceous formations.The goal is to figure out the sizes,directions,locations,and controls of the layers of the fluvial sandstone reservoirs.Sequence stratigraphy is essential for 3D reservoir modeling and petroleum geology understanding in the Bahga oilfield.The purpose of this work is to create a static model that shows the layers and facies distribution in the reservoir interval.We will use data from nine well logs and 22 seismic lines calibrated by the Abu Roash G Member reservoir core intervals to accomplish this.The petrophysical study discovered three parts in the Abu Roash G Member reservoir rock:channel fill that is affected by tides,channel fill that is dominated by tides(intertidal sands),and channel top with lenticular bedded sandstone.The model's findings point to the existence of an NNW-oriented sand body,which could be a prime location to produce hydrocarbons.The original oil in place(OOIP)is about 3,438,279 Stock Tank Barrels(STB),and the oil reserve reaches up to 1,031,484(STB).Sequence stratigraphic analysis using seismic and well log information(SB)reveals that the Upper Cretaceous AR/G reservoir of the Bahga field is characterized by third-and fourth-order stratigraphic sequences,which are constrained by three Maximum Flooding Surfaces(MFS)and two Sequence Boundaries.The integration of the derived geological model and sequence stratigraphic results can lower future extraction risk by identifying the locations and trends of the geologic facies with the necessary petrophysical properties for the hydrocarbon accumulations.

Highlighting relationships between sand thicknesses,reservoir-seal pairs and paleobathymetry from a sequence stratigraphic perspective:An example from Tortonian Serravallian deposits,onshore Niger Delta Basin

The utilization of sequence stratigraphic concepts in identifying sands and their spatial continuity in distinct gross depositional settings is key,especially in frontier settings where data paucity is a common challenge.In the Baka field,onshore Niger Delta,detailed reservoir correlation guided by sequence stratigraphic framework analysis showed the distribution of sand and shale units constituting reservoirseal pairs(RSP)correlatable across the field.Within the 3rd-order packages,it is observed that the lowstand systems tract(LST)and highstand systems tract(HST)contain more RSPs and thicker 4th-and 5th-order sands than the transgressive systems tract(TST).In terms of bathymetry,it is noted that irrespective of systems tracts,the RSP Index(RI)decreases from the proximal shallow/inner shelf settings to the more distal outer shelf areas.Amongst all three systems tracts,intervals interpreted as lowstand prograding complexes contain the best developed sands and highest RSP.Sand development within the LSTs has been controlled by a pronounced growth fault regime accompanied by high subsidence and sedimentation rates.This is linked to the basinward migration of the sands during prolonged sea-level fall,creating significant accommodation space for sand deposition.On the other hand,the TSTs known to mark periods of progressive sea-level rise and landward migration of sandy facies,show thinner sands enclosed in much thicker,laterally extensive,and better-preserved deeper marine shales.Interpreted seismic sections indicate intense growth faulting and channelization that influenced the syn-and postdepositional development of the sand packages across the field.The initial timing of deformation of subregional faults in this area coincides with periods of abrupt falls in sea level.This approach could be useful for predicting sand-prone areas in frontier fields as well as possible reservoir-seal parameters required for some aspects of petroleum system analysis and quick-look volume estimation.

Method and Description of Sedimentary System Characterization Based on Sequence Stratigraphy

A Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. By combining well seismic analysis, the middle section of Shahejie-3 is divided into high-level system tract and forced lake retreat system tract, corresponding to the II oil formation and I oil formation, respectively. Using sequence stratigraphy methods, based on seismic profiles and drilling lithological cycles, the high stand system tract is divided into 5 stages of delta progradation. The first and second stages are high angle S-type progradation with large sedimentary thickness, the third stage is oblique progradation, and the fourth and fifth stages are S-oblique composite progradation;By combining seismic data, we characterized the large-scale (8 small-scale) progradation bodies of 5 periods, clarified the distribution characteristics of reservoir planes, and laid the foundation for the later exploration of oilfield potential.

Coseismic Coulomb stress changes induced by a 2020-2021 M_(W)>7.0 Alaska earthquake sequence in and around the Shumagin gap and its influence on the Alaska-Aleutian subduction interface

Three M_(W)>7.0 earthquakes in 2020-2021 occurred in the Shumagin seismic gap and its adjacent area of the Alaska-Aleutian subduction zone,including the Mw7.8 Simeonof thrust earthquake on July 22,2020,the M_(W)7.6 Sand Point strike-slip earthquake on October 19,2020,and the M_(W)8.2 Chignik thrust earthquake on July 29,2021.The spatial and temporal proximity of these three earthquakes prompts us to probe stress-triggering effects among them.Here we examine the coseismic Coulomb stress change imparted by the three earthquakes and their influence on the subduction interface.Our results show that:(1)The Simeonof earthquake has strong loading effects on the subsequent Sand Point and Chignik earthquakes,with the Coulomb stress changes of 3.95 bars and 2.89 bars,respectively.The Coulomb stress change caused by the Sand Point earthquake at the hypocenter of the Chignik earthquake is merely around 0.01 bars,suggesting the negligible triggering effect on the latter earthquake;(2)The triggering effects of the Simeonof,Sand Point,and Chignik earthquakes on aftershocks within three months are not well pronounced because of the triggering rates of 38%,14%,and 43%respectively.Other factors may have played an important role in promoting the occurrence of these aftershocks,such as the roughness of the subduction interface,the complicated velocity structure of the lithosphere,and the heterogeneous prestress therein;(3)The three earthquakes caused remarkable coseismic Coulomb stress changes at the subduction interface nearby these mainshocks,with an average Coulomb stress change of 3.2 bars in the shallow region directly inwards the trench.

Intelligent extraction of road cracks based on vehicle laser point cloud and panoramic sequence images

In light of the limited efficacy of conventional methods for identifying pavement cracks and the absence of comprehensive depth and location data in two-dimensional photographs,this study presents an intelligent strategy for extracting road cracks.This methodology involves the integration of laser point cloud data obtained from a vehicle-mounted system and a panoramic sequence of images.The study employs a vehicle-mounted LiDAR measurement system to acquire laser point cloud and panoramic sequence image data simultaneously.A convolutional neural network is utilized to extract cracks from the panoramic sequence image.The extracted sequence image is then aligned with the laser point cloud,enabling the assignment of RGB information to the vehicle-mounted three dimensional(3D)point cloud and location information to the two dimensional(2D)panoramic image.Additionally,a threshold value is set based on the crack elevation change to extract the aligned roadway point cloud.The three-dimensional data pertaining to the cracks can be acquired.The experimental findings demonstrate that the use of convolutional neural networks has yielded noteworthy outcomes in the extraction of road cracks.The utilization of point cloud and image alignment techniques enables the extraction of precise location data pertaining to road cracks.This approach exhibits superior accuracy when compared to conventional methods.Moreover,it facilitates rapid and accurate identification and localization of road cracks,thereby playing a crucial role in ensuring road maintenance and traffic safety.Consequently,this technique finds extensive application in the domains of intelligent transportation and urbanization development.The technology exhibits significant promise for use in the domains of intelligent transportation and city development.

Galerkin-Bernstein Approximations for the System of Third-Order Nonlinear Boundary Value Problems

This paper is devoted to find the numerical solutions of one dimensional general nonlinear system of third-order boundary value problems (BVPs) for the pair of functions using Galerkin weighted residual method. We derive mathematical formulations in matrix form, in detail, by exploiting Bernstein polynomials as basis functions. A reasonable accuracy is found when the proposed method is used on few examples. At the end of the study, a comparison is made between the approximate and exact solutions, and also with the solutions of the existing methods. Our results converge monotonically to the exact solutions. In addition, we show that the derived formulations may be applicable by reducing higher order complicated BVP into a lower order system of BVPs, and the performance of the numerical solutions is satisfactory. .