Study on Load Bearing Characteristics of Novel Expandable Deepwater Drilling Conductor Based on Laboratory Experiment and Field Test

A novel expandable conductor was designed and applied in deep-water drilling to improve the vertical and lateral bearing capacity with a significant reduction of conductor jetting depth and soaking time. The vertical and lateral bearing capability of expandable conductors was depicted based on the ultimate subgrade reaction method and pile foundation bearing theory. The load-bearing characteristics of a laboratory-scale expandable conductor were analyzed through laboratory experiments. The serial simulation experiments are accomplished to study the bearing characteristics(vertical ultimate bearing capacity, lateral soil pressure, and lateral displacement) during the conductor soaking process. The laboratory experimental results show that the larger the length and thickness of expandable materials are,the higher the bearing capacity of the wellhead will be. During the conductor soaking process, the soil pressure around the three expandable conductors increases faster, strings representing a stronger squeezing effect and resulting in higher vertical bearing capacity. Furthermore, the lateral displacement of novel expandable conductor is smaller than that of the conventional conductor. All the advantages mentioned above contributed to the reduction of conductor’s jetting depth and soaking time. Lastly, the application workflow of a novel expandable deep-water drilling conductor was established and the autonomous expandable conductor was successfully applied in the South China Sea with a significant reduction of conductor’s jetting depth and soaking time. According to the soil properties and designed installation depth of the surface conductor, the arrangement of expandable materials should be designed reasonably to meet the safety condition and reduce the construction cost of the subsea wellhead.

Clinical Diagnosis and Treatment Characteristics of Acute Respiratory Infections in Children and New Developments in Laboratory Testing

Acute respiratory tract infection (ARTI) in children is the most common infectious disease in childhood, and its pathogens include viruses, bacteria and fungi, mycoplasma, chlamydia and rickettsia. In recent years, with the continuous development of pathogen detection methods, the diagnosis and treatment of acute respiratory infections has received more and more clinical attention. The clinical diagnosis and treatment characteristics of acute respiratory infections in children and the research of clinical laboratory detection methods have also been continuously developed. The author collected references to review the clinical features and new developments in laboratory testing of acute respiratory tract infection in children.

Mode Innovation of School-Enterprise Cooperation on Food Safety Testing Laboratory Reform

In view of the difficulties about school-enterprise cooperation on food safety testing laboratory reform,the current training program,teaching methods and teaching forms are not suitable for the new platform.This paper provides new ideas and modes to solve these problems,such as integrating the resource elements between school and enterprise,establishing new platforms with the help of external force and innovating the cooperation modes to improve the laboratory,which can fully serve teaching,scientific research and enterprise production.

New Explorations of Laboratory and On-site Testing of Broadband Seismographs in China

According to different testing purposes, methods and available environmental conditions, the seismograph testing can be divided into laboratory and on-site testing, respectively. The testing of the seismograph's key parameters and other concerning technical specifications are well described in guide documents(China Earthquake Administration, 2017). This includes seismometer sensitivity, linearity and clip levels based on the shake table test, as well as the seismometer natural period, damping constant based on electrical calibration(Wang Guangfu,1986; Ple?inger A.,1993) and instrumental self-noise collocation estimation(Holcomb L.G., 1989; Sleeman R. et al., 2006). However, with the development of seismic observation technology, many new requirements for the performance evaluation of seismographs have been put forward, and new testing items and methods have emerged.

A Proposed New Laboratory Protocol for Dispersant Effectiveness Testing Adapted for Subsea Dispersant Injection

The main objective of this study is to develop a new protocol for bench-scale dispersant effectiveness testing adapted for subsea dispersants injection (SSDI). The new approach includes turbulence conditions, dispersant injection techniques and quantification of effectiveness, more representative for a SSDI operation. Results from the new system are compared to dispersant effectiveness measured with established laboratory methods, used for screening dispersants for surface application. The most significant result is that the dispersant ranking obtained with the new test relevant for subsea releases was very different compared to the ranking obtained by screening methods used for surface application of dispersants. This strongly indicates that existing standard methods for dispersant effectiveness testing designed for simulating conditions relevant for surface application of dispersants, are less relevant for SSDI effectiveness testing and justify the need for a more relevant method. Such a Dispersant Injection Effectiveness Test (DIET) is suggested and documented in this study.

New Progress in Clinical Diagnosis, Treatment and Laboratory Testing of Acute Respiratory Infections in Children

Acute respiratory infection in children (ARTI) is the most common childhood infectious disease, and its pathogens include bacteria, fungi, viruses, chlamydia, mycoplasma and rickettsia. In recent years, with the continuous development of pathogen detection methods, the diagnosis and treatment of acute respiratory infections has received more and more attention from clinicians. The clinical diagnosis and treatment of acute respiratory infections in children and the research of laboratory detection methods have also been continuously developed. The manuscript presents a review of progress in the clinical diagnosis, treatment and laboratory testing of acute respiratory infections in children by collecting references.

AN AUTOMATED TESTING NETWORK SYSTEM FOR PAPER LABORATORY BASED ON CAN BUS

This paper presents an automated testing network system for paper laboratory based on CAN bus. The overall architecture, hardware interface and software function are discussed in detail. It is indicated through experiment that the system can collect, analyze and store the test results from the various measuring instruments in the paper lab automatically. The simple, reliable, low-cost measuring automation system will have a prosperous application in the future paper industry.

The Transformer Short-Circuit Test and the High Power Laboratory in China-the Past,Present,and Future

We review the short-circuit testing of distribution and power transformers, and include a list of 110-220kV power transformers tested up to February 2002.

Testing and modeling of cyclically loaded rock anchors

The Norwegian Public Roads Administration(NPRA) is planning for an upgrade of the E39 highway route at the westcoast of Norway. Fixed links shall replace ferries at seven fjord crossings. Wide spans and large depths at the crossings combined with challenging subsea topography and environmental loads call for an extension of existing practice. A variety of bridge concepts are evaluated in the feasibility study. The structures will experience significant loads from deadweight, traffic and environment. Anchoring of these forces is thus one of the challenges met in the project. Large-size subsea rock anchors are considered a viable alternative. These can be used for anchoring of floating structures but also with the purpose of increasing capacity of fixed structures. This paper presents first a thorough study of factors affecting rock anchor bond capacity. Laboratory testing of rock anchors subjected to cyclic loading is thereafter presented. Finally, the paper presents a model predicting the capacity of a rock anchor segment, in terms of a ribbed bar, subjected to a cyclic load history. The research assumes a failure mode occurring in the interface between the rock anchor and the surrounding grout. The constitutive behavior of the bonding interface is investigated for anchors subjected to cyclic one-way tensile loads. The model utilizes the static bond capacity curve as a basis, defining the ultimate bond sbuand the slip s1 at τ. A limited number of input parameters are required to apply the model. The model defines the bond-slip behavior with the belonging rock anchor capacity depending on the cyclic load level(τcy/τ), the cyclic load ratio(R= τcy/τcy), and the number of load cycles(N). The constitutive model is intended to model short anchor lengths representing an incremental length of a complete rock anchor.

Analysis and Applications of the Measurement Uncertainty in Electrical Testing

Recently, uncertainty measurement is more and more recognizable in modern data management, conformity assessment, and laboratory accreditation system because of its importance. In this paper, a set of reasonable probability explanations are introduced and an effective method is pro- posed to quantify the assessment indices for the uncertainty measurement of electrical testing laboratory. First of all, the influence from uncertainty factors during the test process is taken into account. With the use of ISO/IEC Guide 98-3 standard and probability theory, the index and model for the measurement uncertainty assessment of a laboratory is then derived. From the simulation results of safety testing, laboratory uncertainty measurement assessment activity for actual electrical appliances, and the confirmation of Monte Carlo simulation method, the appropriateness and correctness of proposed method are verified.

Laboratory Test on Volumetric Characteristics of Saturated Sea Sand Under Cyclic Loading

The deformation of sea coast or sandy deposits caused by earthquakes can lead to catastrophic damages to various port structures. The volumetric deformation is mainly induced by densification of sand during the dissipation of excess pore water pressure created by cyclic loading. Based on laboratory test, the reconsolidation volumetric characteristics of saturated sea sand are investigated. The experiments are conducted with a newly developed multi functional triaxial test equipment. Two types of dynamic loads are applied to the samples to clarify different kinds of affecting factors. It is found that the reconsolidation volumetric strain is correlated not only to the excess pore water pressure and the maximum shear strain during the dynamic loading, but also to the effective confining pressure. A new formula is put forward to calculate the volumetric strain during reconssolidation.

Engineering behaviors of reinforced gabion retaining wall based on laboratory test

In order to study the engineering behaviors of reinforced gabion retaining wall,laboratory model test was carried out.Cyclic load and unload of five levels(0-50,0-100,0-50,0-200 and 0-250 kPa) were imposed.Vertical earth pressure,lateral earth pressure,deformation behaviors of reinforcements,potential failure surface and deformation behaviors of wall face were studied.Results show that vertical earth pressure is less than theoretical value,the ratio of vertical earth pressure to theoretical value increases nearly linearly with increasing load,and the correlation coefficient of regression equation is 0.92 for the second layer and 0.79 for the fifth layer.The distribution of lateral earth pressure along the wall back is nonlinear and it is less than theoretical value especially when the load imposed at the top of retaining wall is large.Therefore,reinforced gabion retaining wall will be in great safety when current method is adopted.The deformation behaviors of reinforcements both in the third layer and the fifth layer are single-peak distributions,and the position of the maximum strain is behind that determined by 0.3H(Here H refers to the height of retaining wall) method or Rankine theory.Lateral deformation of wall face increases with increasing load,and the largest lateral deformation occurs in the fourth layer,which lead to a bulging in the middle of wall face.

Subjective Evaluation of Clothing Comfort and Their Correlation with Laboratory Test

A series of polyester, cotton, and polyester/cotton blend fabrics were evaluated in a subjective wear. Subjective trial data were correlated with the results of in-house laboratory tests with the regression methods. Experimental results indicate that clothing-comfort assessment by human perception provides a sound basis for comparison of apparel garments under combined microclimates and human-activity levels of

The Importance of Molecular and Clinical Laboratory Tests in Diagnosis and Treatment of Coronavirus Disease

900 abusers were tested for the presence of drug abuse and coronavirus disease.In the early stage,the throat and noise samples of these patients were examined by polymerase chain reaction(PCR).The mean age of the study group is 42±23.Hematological and serological examinations were performed on 131 patients.All data were analyzed by t-test and one-way analysis of variance(ANOVA).Therefore,P<0.05 is considered as the significance of the test results.The results showed that 131 patients in the study group had positive results of PCR tests and nearby they had Covid-19.Approximately 90%of patients with coronavirus disease showed positive serological tests and lymphopenic condition.All of urine or blood samples in the 131 patients were positive for the presence of abuse drugs.C-reactive protein(CRP)is one of important serologic test that detected on these patients.This study showed the importance of molecular genetics test such as PCR and also hematology and serology tests in distinguish of coronavirus diseases.

Evaluation of Abuse Drugs and Clinical Laboratory Tests Variations in Whole Blood ＆ Urine Samples of Abusers

In this study, five hundred urine samples and five hundred blood samples of abusers were examined for the presence of alkaloid substances and abuse drugs in urines and bloods. These numbers of blood and urine samples of addicts in clinics of welfare organization, during detoxification treatment or maintenance treatment were screened for abuse drugs presence. The all of samples were tested through as a view of clinical laboratory methods. Age ranges of female patients were 35 ~ 15 and age range of males patients were 45 ~ 15. All patients filled questionnaire and satisfy forms too. First, all fresh urine and blood samples were examined to confirm presence drugs abuses, depend on their addiction and treatment, so all samples were confirmed by two tests. Then they were examined to other clinical laboratory tests. All data were analyzed by t-test and were Anova one way and two ways of Anova Turkey, and p 〈 0.05 was considered significant. The p-value of this study was p = 0.0001. The results of this study were showed that 4% of abusers had mild increase in hematocrite level and 2% of narcotic drugs abusers had mild lower level of blood sugars than normal range and 4% of participants had increase liver enzymes such ALT （alanine transferase）, AST （aspartat transferase）, ALP （alkaline phosphatease） and 1% of them had renal failure. Although blood level BUN （blood urea nitrogen） and creatinin were examined to evaluation of their renal failure .The results in Tabriz/Iran undrevision of welfare organization clinics were approximately showed that positive results of addiction are in each of urine and blood samples. Because some of abusers directly consumed full long time agonist or partial agonists＇ drugs such as methadone and buprenorphine for their maintenance therapy in clinics. Also doing test on blood samples has high importance in distinguishing and confirmation of drugs abuse in samples. Also in this study we conclude that among all drug analytical methods the cheapest and easiest test to screening opioids and other abuse drugs in urine and blood samples is strip test for rapid diagnosis, also tests on blood samples have high importance as a view point of accuracy to distinguishing of drugs abuse, and serum levels of some other parameters showed all abusers patients situation such as liver and renal dysfimction through clinical laboratory tests.

Laboratory pull-out tests on fully grouted rock bolts and cable bolts:Results and lessons learned

Laboratory pull-out tests were conducted on the following rock bolts and cable bolts:steel rebars,smooth steel bars,fiberglass reinforced polymer threaded bolts,flexible cable bolts,IR5/IN special cable bolts and Mini-cage cable bolts.The diameter of the tested bolts was between 16 mm and 26 mm.The bolts were grouted in a sandstone sample using resin or cement grouts.The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample.In most tests,the rate of displacement was about 0.02 mm/s.The tests were performed using a pull-out bench that allows testing a wide range of parameters.This paper provides an extensive database of laboratory pull-out test results and confirms the influence of the confining pressure and the embedment length on the pull-out response(rock bolts and cable bolts).It also highlights the sensitivity of the results to the operating conditions and to the behavior of the sample as a whole,which cannot be neglected when the test results are used to assess the bolt-grout or the grouterock interface.

Field load testing of copper extraction aeration pipes under simulated high heap pile

Recently a research team at Ohio University,USA,conducted a unique full-scale feld load test to simulate the aeration pipe installations at a copper extraction mine operated in Chile.The overliner material taken from the mine was used in recreating the in situ conditions.Electric heaters were utilized to raise the temperature inside each pipe to simulate the essential element of the copper extraction process.The maximum vertical deflection reached by the test pipes was close to 20%,when the simulated heap pile height was 80 m.The plastic pipes and the overliner material were also tested in the laboratory.Based on the results,the maximum heap pile fll depth was recommended for the aeration system.The results indicated that the vertical deflection was the primary performance index for the aeration pipes installed in heap piles at mines.Lastly,the pipe made of polypropylene resin was super.

Acoustic emission characterization of microcracking in laboratory-scale hydraulic fracturing tests

Understanding microcracking near coalesced fracture generation is critically important for hydrocarbon and geothermal reservoir characterization as well as damage evaluation in civil engineering structures. Dense and sometimes random microcracking near coalesced fracture formation alters the mechanical properties of the nearby virgin material. Individual microcrack characterization is also significant in quantifying the material changes near the fracture faces （i.e. damage）. Acoustic emission （AE） monitoring and analysis provide unique information regarding the microcracking process temporally, and infor- mation concerning the source characterization of individual microcracks can be extracted. In this context, laboratory hydraulic fracture tests were carried out while monitoring the AEs from several piezoelectric transducers. In-depth post-processing of the AE event data was performed for the purpose of under- standing the individual source mechanisms. Several source characterization techniques including moment tensor inversion, event parametric analysis, and volumetric deformation analysis were adopted. Post-test fracture characterization through coring, slicing and micro-computed tomographic imaging was performed to determine the coalesced fracture location and structure. Distinct differences in fracture characteristics were found spatially in relation to the openhole injection interval. Individual microcrack AE analysis showed substantial energy reduction emanating spatially from the injection interval. It was quantitatively observed that the recorded AE signals provided sufficient information to generalize the damage radiating spatially away from the injection wellbore.

Integrating Electronic Systems for Requesting Clinical Laboratory Test into Digital Clinical Records: Design and Implementation

Clinical laboratory tests are basic elements that support healthcare tasks such as disease detection, diagnosis and monitoring of response to treatments. Current laboratory information systems focus on the patient database, tests and results, with multiple modules available, connecting with the various analytical systems or work areas. However laboratory information systems functioned as “islands of information”, because their design was fundamentally inward-looking and disconnected from other healthcare computer applications. Actually, the Electronic Health Register (EHR) is considered by clinicians as a tool with great potential healthcare benefits. The EHR, in the sense of a unique and complete record of a patient’s healthcare and state of health, regardless of the healthcare level used, is a real attempt to eliminate these “islands of information” and need modules to act as “bridges” with the laboratory information systems. This type of module, which in generic terms may be referred to as a laboratory test request module, has become an essential feature of the EHR. These modules need to use a laboratory coding system as a common language for exchanging information, ensuring that tests and results are unequivocally identified. The development of the laboratory test request module requires the commitment of professionals and political authorities, being necessary time for their design and an adequate pilot phase. The laboratory professionals have to assume a leadership role in the whole process of design, development and implementation of these modules, integrating in the equipment of information technologies of healthcare providers. In our manuscript we review the elements that may prove electronic systems for requesting clinical laboratory test into digital clinical records and the key elements to move from theory to practice.

From bed to bench: Which attitude towards the laboratoryliver tests should health care practitioners strike?

There is a general consensus in re-interpreting the so-called liver function tests in the light of novel discoveries. At the same time, recent evidence favours the use of different laboratory data to assess liver damage, fibrosis or regenerative process, but this point is not always shared. Actually, balancing the need for diagnosis, prognostic evaluation and therapy response of liver disease with a good cost/benefit ratio is very difficult. New tests are probably not needed but the aim should be for better utilization of existing tests to contain the increasing cost of health care.