Usefulness of three-dimensional visualization technology in minimally invasive treatment for infected necrotizing pancreatitis

AIM To explore the value of three-dimensional(3 D) visualization technology in the minimally invasive treatment for infected necrotizing pancreatitis(INP). METHODS Clinical data of 18 patients with INP, who were admitted to the PLA General Hospital in 2017, were retrospectively analyzed. Two-dimensional images of computed tomography were converted into 3 D images based on 3 D visualization technology. The size, number, shape and position of lesions and their relationship with major abdominal vasculature were well displayed. Also, percutaneous catheter drainage(PCD) number and puncture paths were designed through virtual surgery(percutaneous nephroscopic necrosectomy) based on the principle of maximum removal of infected necrosis conveniently.RESULTS Abdominal 3 D visualization images of all the patients were well reconstructed, and the optimal PCD puncture paths were well designed. Infected necrosis was conveniently removed in abundance using a nephroscope during the following surgery, and the median operation time was 102(102 ± 20.7) min. Only 1 patient underwent endoscopic necrosectomy because of residual necrosis. CONCLUSION The 3 D visualization technology could optimize the PCD puncture paths, improving the drainage effect in patients with INP. Moreover, it significantly increased the efficiency of necrosectomy through the rigid nephroscope. As a result, it decreased operation times and improved the prognosis.

Three-dimensional visualization of soil pore structure using computed tomography

The geometric and spatial characteristics of pore structures determine the permeability and water retention of soils, which have important effects on soil functional diversity and ecological restoration. Until recently, there have not been tools and methods to visually and quantitatively describe the characteristics of soil pores. To solve this problem, this research reconstructs the geometry and spatial distribution of soil pores by the marching cubes method, texture mapping method and the ray casting method widely used in literature. The objectives were to explore an optimal method for three-dimensional visualization of soil pore structure by comparing the robustness of the three methods on soil CT images with single pore structure and porosity ranging from low (2–5%) to high (12–18%), and to evaluate the reconstruction performance of the three methods with different geometric features. The results demonstrate that there are aliases (jagged edges) and deficiency at the boundaries of the model reconstructed by the marching cubes method and pore volumes are smaller than the ground truth, whereas the results of the texture mapping method lack the details of pore structures. For all the soil images, the ray casting method is preferable since it better preserves the pore characteristics of the ground truth. Furthermore, the ray casting method produced the best soil pore model with higher rendering speed and lower memory consumption. Therefore, the ray casting method provides a more advanced method for visualization of pore structures and provides an optional technique for the study of the transport of moisture and the exchange of air in soil.

Visualization analysis of the capability of weapon system of systems for multi-dimensional indicators

In the field of weapon system of systems (WSOS) simulation, various indicators are widely used to describe the capability of WSOS, but it is always difficult to describe the comprehensive capability of WSOS quickly and intuitively by visualization of multi-dimensional indicators. A method of machine learning and visualization is proposed, which can display and analyze the capabilities of different WSOS in a two-dimensional plane. The analysis and comparison of the comprehensive capability of different components of WSOS is realized by the method, which consists of six parts: multiple simulations, key indicators mining, three spatial distance calculation, fusion project calculation, calculation of individual capability density, and calculation of multiple capability ranges overlay. Binding a simulation experiment, the collaborative analysis of six indicators and 100 possible kinds of red WSOS are achieved. The experimental results show that this method can effectively improve the quality and speed of capabilities analysis, reveal a large number of potential information, and provide a visual support for the qualitative and quantitative analysis model.

Four-dimensional Visual Analysis and Design Optimization of LC Filters at DC Side of Single-phase Diode Rectifiers

整流滤波电路用途广泛但其优化设计不易得到全局最优解。对单相桥式不控整流电路的LC滤波器进行深分析，得到输出平均电压、浪涌电流、振荡电压、谐波衰减比和体积等的表达式f（L，C,R），并在Matlab环境下用四维数据场展现其全局的值域分布，按需用不同交集来表征所须兼顾的多个设计目标，逐步导入约束条件来进行优化。实验结果表明，在滤波器外特性基本相同的前提下，基于数据场可视化算法的优化设计达到了体积缩小1／4的效果。

Geologic body three-dimensional model generation and visualization method

The divergence three-dimensional millet-seed body model and the continuous distributing layer-imitating model were introduced, which were used to express geologic body, and the procedure of generating these two models and their merits and demerits were synthesized. Three methods of geologic body’s three-dimensional expression were separately introduced, and the merits of the continuous distributing layer imitating model were proposed as comparing with the divergence three-dimensional millet-seed body model. The three-dimensional cubes were observed from any direction and any tangle with the application of dealing methods such as peeling, hollowing out, transparent or half-transparent.

Application of Three-Dimensional Visualization Technology in Project Management of Offshore Platform Engineering Construction

Three-dimensional visualization technology converts engineering design drawings and data into graphics or images, realizes virtual reality perception of simulated users in future construction scene, enhances the interaction between project management and technical personnel and engineering construction achievement, and provides intuitive, flexible and strong realistic experience for project management. It can effectively improve the level of project communication, and assist the needs of project construction planning management, training, exhibition, etc. As a tool to help improve project management skills, it has good application effect and prospects.

In-situ three-dimensional visualization of dynamic tension deformation in ferrite stainless steels

An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning electron microscope （ESEM）. The samples were machined with a radial notched shape and a sloped surface. Both planar surface deformation and sloping surface deformation-induced microvoids were observed during dynamic tension experiments, where a greater amount of information could be obtained from the sloping surface. The results showed that microvoids formed at the grain boundaries of highly elongated large grains. The microvoids nucleated in the severely deformed regions grew nearly parallel to the tensile axis, predominantly along the grain boundaries. The microvoids nucleated at the interface of particles and the matrix did not propagate due to the high plasticity of the matrix. The large microvoids propagated and showed a zigzag shape along the grain boundaries,seemingly a consequence of the fracture of the slip bands caused by dislocation pile-ups. The final failure took place due to the reduction of the load-beating area.

VISUALIZATION OF THREE-DIMENSIONAL DATA FIELD AND ITS APPLICATION IN MACHINE TESTING

In order to realize visualization of three-dimensional data field （TDDF） in instrument, two methods of visualization of TDDF and the usual manner of quick graphic and image processing are analyzed. And how to use OpenGL technique and the characteristic of analyzed data to construct a TDDF, the ways of reality processing and interactive processing are described. Then the medium geometric element and a related realistic model are constructed by means of the first algorithm. Models obtained for attaching the third dimension in three-dimensional data field are presented. An example for TDDF realization of machine measuring is provided. The analysis of resultant graphic indicates that the three-dimensional graphics built by the method developed is featured by good reality, fast processing and strong interaction

Values of macular ganglion cell-inner plexiform layer and 10-2 visual field measurements in detecting and evaluating glaucoma

AIM:To assess the performance of macular ganglion cell-inner plexiform layer thickness(mGCIPLT)and 10-2 visual field(VF)parameters in detecting early glaucoma and evaluating the severity of advanced glaucoma.METHODS:Totally 127 eyes from 89 participants(36 eyes of 19 healthy participants,45 eyes of 31 early glaucoma patients and 46 eyes of 39 advanced glaucoma patients)were included.The relationships between the optical coherence tomography(OCT)-derived parameters and VF sensitivity were determined.Patients with early glaucoma were divided into eyes with or without central 10°of the VF damages(CVFDs),and the diagnostic performances of OCT-derived parameters were assessed.RESULTS:In early glaucoma,the mGCIPLT was significantly correlated with 10-2 VF pattern standard deviation(PSD;with average mGCIPLT:β=-0.046,95%CI,-0.067 to-0.024,P<0.001).In advanced glaucoma,the mGCIPLT was related to the 24-2 VF mean deviation(MD;with average mGCIPLT:β=0.397,95%CI,0.199 to 0.595,P<0.001),10-2 VF MD(with average mGCIPLT:β=0.762,95%CI,0.485 to 1.038,P<0.001)and 24-2 VF PSD(with average mGCIPLT:β=0.244,95%CI,0.124 to 0.364,P<0.001).Except for the minimum and superotemporal mGCIPLT,the decrease of mGCIPLT in early glaucomatous eyes with CVFDs was more severe than that of early glaucomatous eyes without CVFDs.The area under the curve(AUC)of the average mGCIPLT(AUC=0.949,95%CI,0.868 to 0.982)was greater than that of the average circumpapillary retinal nerve fiber layer thickness(cpRNFLT;AUC=0.827,95%CI,0.674 to 0.918)and rim area(AUC=0.799,95%CI,0.610 to 0.907)in early glaucomatous eyes with CVFDs versus normal eyes.CONCLUSION:The 10-2 VF and mGCIPLT parameters are complementary to 24-2 VF,cpRNFLT and ONH parameters,especially in detecting early glaucoma with CVFDs and evaluating the severity of advanced glaucoma in group level.

Numerical study on three-dimensional flow field of continuously rotating detonation in a toroidal chamber

Gaseous detonation propagating in a toroidal chamber was numerically studied for hydrogen/oxygen/nitrogen mixtures. The numerical method used is based on the three-dimensional Euler equations with detailed finiterate chemistry. The results show that the calculated streak picture is in qualitative agreement with the picture recorded by a high speed streak camera from published literature. The three-dimensional flow field induced by a continuously rotating detonation was visualized and distinctive features of the rotating detonations were clearly depicted. Owing to the unconfined character of detonation wavelet, a deficit of detonation parameters was observed. Due to the effects of wall geometries, the strength of the outside detonation front is stronger than that of the inside portion. The detonation thus propagates with a constant circular velocity. Numerical simulation also shows three-dimensional rotating detonation structures, which display specific feature of the detonation- shock combined wave. Discrete burning gas pockets are formed due to instability of the discontinuity. It is believed that the present study could give an insight into the interest- ing properties of the continuously rotating detonation, and is thus beneficial to the design of continuous detonation propulsion systems.

Infinite Three-Dimensional Coordination Polymers: Synthesis and Structures of [Cd (4,4'-bpy)_2 (H_2O)_2]_n (pic)_(2n),[Zn (4,4'-bpy)_2 (H_2O)_2]_n(pic)_(2n) (H_2O)_(2n), and [Zn (4,4'-bpy)_2 (H_2O)_2]_n (4,4'-bpy)_n(H_2O)_n (pic)_(2n)

Three Complexes of the formula [Cd (4,4'-bpy)_2 (H_2O)_2]_n. (pic)_(2n) (1) [Zn (4,4'-bpy)_2 (H_2O)]_n (4,4'-bpy)_n(H_2O)_n (pic)-(2n) (2) and [Zn (4,4'-bpy)_2 (H_2O)]_n (4,4'-bpy)_n (pic)-(2n)(H_2O)_n (3) (4.4'-bpy = 4.4'-bipyridine. pic = picric anion ) have been synthesized and characterized by elemental analysis and single-crystal x-ray diffraction. They all have infinite three-dimensional network structure. crystallizing in the monoclinic space group C2/c (1) and Cc (2.3).

Four-dimensional flow magnetic resonance imaging incirrhosis

Since its introduction in the 1970’s,magnetic resonance imaging(MRI)has become a standard imaging modality.With its broad and standardized application,it is firmly established in the clinical routine and an essential element in cardiovascular and abdominal imaging.In addition to sonography and computer tomography,MRI is a valuable tool for diagnosing cardiovascular and abdominal diseases,for determining disease severity,and for assessing therapeutic success.MRI techniques have improved over the last few decades,revealing not just morphologic information,but functional information about perfusion,diffusion and hemodynamics as well.Four-dimensional(4D)flow MRI,a time-resolved phase contrast-MRI with three-dimensional(3D)anatomic coverage and velocity encoding along all three flow directions has been used to comprehensively assess complex cardiovascular hemodynamics in multiple regions of the body.The technique enables visualization of 3D blood flow patterns and retrospective quantification of blood flow parameters in a region of interest.Over the last few years,4D flow MRI has been increasingly performed in the abdominal region.By applying different acceleration techniques,taking 4D flow MRI measurements has dropped to a reasonable scanning time of 8 to 12 min.These new developments have encouraged a growing number of patient studies in the literature validating the technique’s potential for enhanced evaluation of blood flow parameters within the liver’s complex vascular system.The purpose of this review article is to broaden our understanding of 4D flow MRI for the assessment of liver hemodynamics by providing insights into acquisition,data analysis,visualization and quantification.Furthermore,in this article we highlight its development,focussing on the clinical application of the technique.

3-D Visualization of Medical Images with Arbitrary Sections

In this paper, with the general retrospect to the research on surface reconstruction and the marching cubes algorithm, we gave detailed description of an algorithm on the construction of object surfaces. The possible ambiguity problem in the original marching cubes algorithm was eliminated by its index mechanism. Some results on the MRI images were presented. Based on extracting and clipping contours from a set of medial slice images and setting the patch vertices values according to the gray images, this algorithm may be applied to form the arbitrary section images with three dimensional effects. It can also enhance the visual effect and interpretation of medical data.

3-Dimensional Body Measurement Technology

3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.

同步辐射3Dμ-CT用于棉纱成像研究

纱线内部纤维的分布以及转移规律是纱线研究的热点。同步辐射三维显微CT成像技术(μ-XCT)具有穿透性强、分辨率高等优势,可以清晰地展示被检测物体的内部结构状况。本文基于同步辐射三维显微CT成像技术对一种棉纱(转杯纺棉纱)进行扫描,然后采用Avizo中AI辅助分割模块进行三维构建和可视化表征。结果表明:借助同步辐射CT成像技术实现亚微米分辨率棉纱的三维显微成像表征,可以获取纱的结构特征以及纤维在纱中纤维转移特征。这促进了人们对纱线结构和性能的全面深入理解,为优化棉纱生产、提高棉纱质量和性能提供了宝贵的信息。

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD), space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The object- selection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3D-map, expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover, such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.

Exploring visual quality of multidimensional time series projections

Dimensionality reduction is often used to project time series data from multidimensional to two-dimensional space to generate visual representations of the temporal evolution.In this context,we address the problem of multidimensional time series visualization by presenting a new method to show and handle projection errors introduced by dimensionality reduction techniques on multidimensional temporal data.For visualization,subsequent time instances are rendered as dots that are connected by lines or curves to indicate the temporal dependencies.However,inevitable projection artifacts may lead to poor visualization quality and misinterpretation of the temporal information.Wrongly projected data points,inaccurate variations in the distances between projected time instances,and intersections of connecting lines could lead to wrong assumptions about the original data.We adapt local and global quality metrics to measure the visual quality along the projected time series,and we introduce a model to assess the projection error at intersecting lines.These serve as a basis for our new uncertainty visualization techniques that use different visual encodings and interactions to indicate,communicate,and work with the visualization uncertainty from projection errors and artifacts along the timeline of data points,their connections,and intersections.Our approach is agnostic to the projection method and works for linear and non-linear dimensionality reduction methods alike.

3D visualization model and key techniques for digital mine

Digital mine is the inevitable outcome of the information processing, and is also a complicated system engineering. Firstly, for the 3D visualization application of the digital mine, the ground and underground integrative visualization framework model was proposed based on the mine entity database. So, the visualization problem was availably resolved, as well as the professional analytical ability was improved. Secondly, aiming at the irregularities, non-uniformity, dynamics of mine entities, mix modeling method based on the entity character was put forward, in which 3D expression of mine entities was realized. Lastly, the 3D visualization project for a copper mine was experimentally studied. Satisfactory results were acquired, and the rationality of visualization model and feasibility of 3D modeling were validated.

Urban Vulnerabilities in the Kathmandu Valley, Nepal: Visualizations of Human/Hazard Interactions

Excessive unplanned urban growth leads to many vulnerabilities and impacts on urban environments to varying degrees. However, the majority of the extant literature focuses on the problems related to location and socioeconomic conditions, rather than vulnerability processes and related environmental degradation. This paper analyzes the scope of urban vulnerabilities for five rapidly urbanizing and highly-congested cities in the Kathmandu Valley, Nepal. First, the historic context of the Valley’s uncontrolled urbanization sets the scene. Second, the optic is narrowed to focus upon the geographical features of the resultant urbanized Valley landscape that includes spatial arrangements and of houses, population densities, road networks, vehicular densities, garbage problems, and available open spaces. Additionally, seismic vulnerabilities in the urban areas are also considering in this examination. Third, three-dimensional visualizations of selected urban locations are presented to differentiate between vulnerable and relatively safe locations. The intent of this research is to contribute to the methodological understanding of human/hazards interactions in rapidly urbanizing cities of the Third World, which share similar socioeconomic conditions and environmental con-texts.

基于Visual Modflow研究武隆-广杨深层岩溶水径流特征

近年来,在武隆地区经济快速发展的同时,对水资源的需求量大增,土地石漠化等水文地质问题频发,使岩溶地区生态安全受到巨大威胁。运用Visual Modflow软件对研究区的典型剖面进行数值模拟,研究武隆-广杨地区深层岩溶水的运动规律,研究该地区深层岩溶水流系统循环特征、剖面上岩溶水的径流强度与滞留时间,为该地区工程建设提供技术支撑。研究结果表明:研究区地下存在局部、中间、区域三级地下水流动系统,其排泄区为十三沟、百笋溪和乌江,渗流速度分别为0.34 m/d、0.59 m/d和0.51 m/d。整体上看,研究区局部流动系统最发育,地下水滞留时间10~110年。由于百笋溪与乌江相距不远,垂直海拔相近,导致中间水流系统和区域水流系统发育程度相近,地下水滞留时间分别为约420年和约680年,并且岩溶水年龄沿岩溶水流动路径有逐渐衰老的趋势。总体而言,研究区的岩溶水年龄均小于700年,为现代水。