Three dimensional finite element analysis of acetabulum loaded by static stress and its biomechanical significance

Objective:To explore the mechanical behavior of acetabulum loaded by static stress and provide the mechanical basis for clinical analysis and judgement on acetabular mechanical distribution and effect of static stress.Methods:By means of computer simulation, acetabular three dimensional model was input into three dimensional finite element analysis software ANSYS7.0. The acetabular mechanical behavior was calculated and the main stress value, stress distribution and acetabular unit displacement in the direction of main stress were analyzed when anterior wall of acetabulum and acetabular crest were loaded by 1 000 N static stress. Results:When acetabular anterior wall loaded by X direction and Z direction composition force, the stress passed along 4 directions: (1)from acetabular anterior wall to pubic symphysis along superior branch of pubis firstly, (2)from acetabular anterior wall to cacroiliac joint along pelvic ring,(3)in the acetabulum,(4)from the suffered point to ischium. When acetabular crest loaded by X direction and Y direction composition force, the stress transmitted to 4 directions: (1)from acetabular crest to ilium firstly, (2)from suffered point to cacroiliac joint along pelvic ring,(3) in the acetabulum ,(4)along the pubic branch,but no stress transmitted to the ischium branch.Conclusion:Analyzing the stress distribution of acetabulum and units displacement when static stress loaded can provide internal fixation point for acetabular fracture treatment and help understand the stress distribution of acetabulum.

3D FEM analysis for layered rock considering anisotropy of shear strength

An empirical expression of cohesion （C） and friction angle （Ф） for layered rock was suggested. This expression was compared with a test result made by the former researchers. The constitutive relationship of a transversely isotropic medium and Mohr-Coulomb criterion in which C and Ф vary with directions were employed, and a relative 3D elasto-plastic FEM code was developed, in which the important thing was to adopt a search-trial method to find the orientation angle （p） of shear failure plane （or weakest shear plane） with respect to the major principal stress as well as the corresponding C and Ф Taking an underground opening as the calculation object, the numerical analyses were carried out by using the FEM code for two cases of transversely isotropic rock and isotropic rock, respectively, and the computation results were compared. The results show that when the rock is a transversely isotropic one, the distributions of displacements, plastic zones and stress contours in the surrounding rock will be non-axisymmetric along the tunnel＇s vertical axis, which is very different from that of isotropic rock. The stability of the tunnel in transversely isotropic rock is relatively low.

Settlement Analysis for An Embankment Considering Visco-Elasto-Plastic Characteristics

In the paper. a visco-elasto plastic constitutive model and a method for determining model parameters for soft clay are presented. In this model total strain of soft clay is assumed to be divided into three parts: instantaneous elastic, visco-elastic and visco-plastic. The characteristics of instantaneous and visco-elastic deformation of soft clay are simulated by Merchant's model, the plastic is by a model with two yield surfaces. And related constitutive equation is conducted. A number of stress-controlled triaxial tests are performed to calculated the model parameters. The visco-elasto-plastic model is used for analysis of the displacement of an embankment on soft ground by use of three-dimensional finite element method. The predicted settlements agree well with the measured data. It is indicated that the viscous characteristics should be taken into account in deformation analysis for soft clay.