Three Dimensional Kinematics Analysis of the Independent Suspension Multibody System

Based on the theory of multibody system dynamics, the spatial kinematics analysis of the Mcpherson independent suspension widely used in the car was carried out. A practical and simpler method was provided to reduce the number of the generalized coordinates and constraint functions. By solving the nonlinear equations, the motion of any points in the whole suspension and wheel system can be predicted, including the spatial changes of the wheel alignment parameters which are of great importance to the car performances.

Three dimensional shear wave velocity structure of crust and upper mantle in South China Sea and its adjacent regions by surface waveform inversion

We assembled approximately 328 seismic records. The data set was from 4 digitally recording long-period and broadband stations of CDSN. We carried out the inversion based on the partitioned waveform inversion (PWI). It partitions the large-scale optimization problem into a number of independent small-scale problems. We adopted surface waveform inversion with an equal block (2((2() discretization in order to acquire the images of shear velocity structure at different depths (from surface to 430 km) in the crust and upper-mantle. The resolution of all these anomalies has been established with (check-board( resolution tests. These results show significant difference in velocity, lithosphere and asthenosphere structure between South China Sea and its adjacent regions.

The Controlled-releasing Drug Implant based on the Three Dimensional Printing Technology: Fabrication and Properties of Drug Releasing in vivo

Three dimensional （3D） printing technology was utilized to fabricate a new type of drug implant with complicated architectures, employing levofloxacin （LVFX） and rifampicine （RFP） as model drugs. The prepared drug implant prototype consists of a doublelayer structure, of which the upper region is a reservoir system containing RFP and the lower region is a matrix one containing LVFX. The release test in vivo revealed that LVFX was released in the early stage; no RFP was detected until 8th day; both of them continuously released more than 6 weeks. Therefore, 3D printing technology provides a precise and feasible method to fabricate a controlled-releasing drug implant with complicated architectures and this drug implant may present a new strategy for the prophylaxis and treatment of bone diseases such as combined bone infections and bone tuberculosis in the near future.

Review of Electronic Speckle Pattern Interferometry(ESPI) for Three Dimensional Displacement Measurement

Three dimensional（3D） displacements, which can be translated further into 3D strain, are key parameters tor design, manufacturing and quality control. Using different optical setups, phase-shift methods, and algorithms, several different 3D electronic speckle pattern interferometry（ESPl） systems for displacement and strain measurements have been achieved and commercialized. This paper provides a review of the recent developments in ESPI systems for 3D displacement and strain measurement. After an overview of the fundamentals of ESP! theory, temporal phase-shift, and spatial phase-shift techniques, 3D deformation measurements by the temporal phase-shift ESPI system, which is suited well for static measurement, and by the spatial phase-shift ESPI system, which is particularly useful for dynamic measurement, are discussed. For each method, the basic theory, a brief derivation and different optical layouts are presented. The state of art application, potential and limitation of the ESPI systems are shown and demonstrated.

Three dimensional tectonic stress field in North China

According to the latest data of geological structure, geophysics, in-situ stress measurement and focal mechanism,3-D tectonic stress field model in North China is built and 3-D tectonic stress field pattern of North China aresimulated by finite element method. Then the overall characteristics and regional specific feature of North Chinaare studied. Finally, the influences of the valid dynamic boundary conditions of North China Block, active faultsand the inhomogeneity of crustal medium on tectonic stress field of North China are investigated.

Three dimensional photovoltaic fibers for wearable energy harvesting and conversion

As the development of smart electronics, self-powered sources have been attracting increasing attention.This review summarizes research progress of photovoltaic fibers and their integrated power sources with multi-stage energy conversion. Recent development of three dimensional photovoltaic fibers is glanced with special attention to structure design and materials of typical photovoltaic types（inorganic, organic,dye/quantum dot sensitized and perovskite solar cells）. The application of carbon materials in fiber energy is focused as it is a hot topic recently. The hybrid energy systems based on fiber solar cells and fiber supercapacitors, fiber batteries and fiber nanogenerators are summarized together with hybrid energy textiles. This review provides a macroscopic view of novel energy fibers and will attract research interest in flexible/wearable fiber electronics and energy textiles.

Modeling and validating three dimensional human normal cervix and cervical cancer tissues in vitro

The use of three dimensional in vitro systems in cancer research is a promising path for developing effective anticancer therapies.The aim of this study was to engineer a functional 3-D in vitro model of normal and cancerous cervical tissue.Normal epithelial and immortalized cervical epithelial carcinoma cell lines were used to construct 3-D artificial normal cervical and cervical cancerous tissues.De-epidermised dermis（DED） was used as a scaffold for both models.Morphological analyses were conducted by using hematoxylin and eosin staining and characteristics of the models were studied by analyzing the expression of different structural cytokeratins and differential protein marker MAX dimerisation protein 1（Mad1） using immunohistochemical technique.Haematoxylin and eosin staining results showed that normal cervical tissue had multi epithelial layers while cancerous cervical tissue showed dysplastic changes.Immunohistochemistry staining revealed that for normal cervix model cytokeratin 10 was expressed in the upper stratified layer of the epithelium while cytokeratin 5 was expressed mainly in the middle and basal layer.Cytokeratin 19 was weakly expressed in a few basal cells.Cervical cancer model showed cytokeratin 19 expression in different epithelial layers and weak or no expression for cytokeratin 5 and cytokeratin 10.Madl expression was detected in some suprabasal cells.The 3-D in vitro models showed stratified epithelial layers and expressed the same types and patterns of differentiation marker proteins as seen in corresponding in vivo tissue in either normal cervical or cervical cancerous tissue.These findings imply that they can serve as functional normal and cervical cancer models.

Precision Analysis of Three Dimension Free Curves Nanofabrication

Three dimension free curves find wide applications in engineering. There is no problem to express them exactly mathematically, but th e reportage has not been done on the investigation of precision analysis of thre e-dimension free curves nanofabrication. Nanofabrication Precision includes the geometrical precision and the precision of driving system (below simply cal led the system precision). This paper submits the precision analysis method of c urve normal vector to analyze geometrical precision. Take an aspherical surf ace for example, it can be fitted and constructed by tensor product parameter cu rves, such as linear drawing curves, straight veins curves, rotating curves, swe eping curves, DUCT curves and Geomap curves. Then the curves of the aspherical s urface is iterated and modified to select the best fitted curves of the aspheric al surface. Finally, the geometrical precision of perfect approximate aspherical surface fitting has been sought. This kind of geometrical fitting construction is very important. Another is the system precision, which contains axial position precision, line p recision, and twisting and swinging precision, etc. The paper adopts the theory of precision optimum match (Prof. Wang Er-qi first put forward in 19 83) to allocate precision optimumly. The minimum cost is used as an objective fu nction, and weight method matches the precision. To obtain the optimum match combination of the minimum cost design parameters and every composing element t olerance, the precision is iterated and sought optimumly to design the system op timumly. The theoretical analysis shows that it’s feasible to control three dim ension free curves nanofabrication within nanometer scale precision.

Dynamic Parallel Method for Eulerian Method of Elastoplastic Hydrodynamics in Three Dimension

Eulerian method is a main numerical simulation method in elastoplastic hydrodynamics, which is suitable for the problems with multi-component and large deformation. As the feature of the problems to be simulated, such as detonation and penetration, the dynamic parallel method （DPM） is designed to adjust the computational domain dynamically to get better load balance. Dynamic parallel method can be separated into two parts： one is division of initial computational domain and location of the data, the other is expansion of the computational domain and adjustment of the data location. DPM program can greatly shorten computational time and be preferable in simulating actual problems. The speedup of the DPM program is linear in parallel test. DPM can be popularized to parallel program of other multi-component high dimension Eulerian methods naturally.

The Properties of an UV Curable Support Material Pre-polymer for Three Dimensional Printing

An ultraviolet（UV） curable support material pre-polymer for three dimensional printing was prepared based on the synergistic effect between PEO-PPO-PEO tri-block copolymer（F127） and polyethylene glycol （400） di-acrylate（SR344）. The effects of jetting conditions, thermal stability, curing time, mechanical properties and shrinking rate on printing models were studied. The situation of removing support material from build model was investigated after building progress was completed. The experimental result shows that when F127 is 6.0wt%, SR344 is 20.0wt%, 4-Methoxy phenol is 0.15wt% and Irgacure 2959 is 1.5wt%, the support material pre-polymer could be jetted out from the nozzles smoothly during building up of three dimensional printing models at 50-55 ℃. In addition, the support material could be removed easily from building model without spoiling the model; furthermore, the forming precision of building model is improved.

The analysis of complex behaviours of a novel three dimensional autonomous system

This paper introduces a new three dimensional autonomous system with five equilibrium points. It demonstrates complex chaotic behaviours within a wide range of parameters, which are described by phase portraits, Lyapunov exponents, frequency spectrum, etc. Analysis of the bifurcation and Poincar@ map is used to reveal mechanisms of generating these complicated phenomena. The corresponding electronic circuits are designed, exhibiting experimental chaotic attractors in accord with numerical simulations. Since frequency spectrum analysis shows a broad frequency bandwidth, this system has perspective of potential applications in such engineering fields as secure communication.

Three dimensional particles identification and shape parameters research on coarse aggregates of asphalt mixture using X-ray CT images

In this paper a series of digital image processing methods were adopted for getting separated coarse aggregates from asphalt mixture specimen using high-resolution X-ray Computed Tomography (CT) images.The existing three dimensional (3D) particles matching methods based on two dimensional (2D) continuous cross-sections were analyzed and a new 'overlap area method' was presented.After the 3D particles were extracted one by one successfully,the basic parameters of each aggregate:perimeter,area,surface area,and volume were calculated by chain code method.Finally,the 3D mass center coordinates and the sphericity index were introduced.

Approach to Power Spectrum Density Values in Three Dimensional Acceleration of Ground Motions

In this paper, based on the random characteristic analysis of Tianjin Hospital earthquake waves of Tangshan aftershock, the three dimensional acceleration power spectrum density ratio has been presented.

Point-of-Care Testing Using Three Dimensional Optical Biosensor Based on Microfluidic Technology

We have presented a three dimensional optical protein chip that fulfills the demanding for point-of-care diagnostics in terms of ease-of-use (one step assay), miniaturization (5 μl). The artful combination of magnetic nanoparticles on chip and total internal reflection imaging (TIRI) technology permits the sensitive and rapid detection of hs-CRP (high-sensitivity C-reactive protein). The whole test was complete within 10 min using “all in one step” assay with a limit of detection of 0.1 ng/mL hs-CRP. The measuring range for hs-CRP could be extended to 10 ng/mL. The chip can also be used to detect more parameters in blood samples.

Part Orientation Optimization in Three Dimensional Printing

Part orientation is one of the important factors in manufacturing with three dimensional printing (3DP) of rapid prototyping system. The minimum building time, being achieved by the part’s minimum building height and minimum width in 3DP’s y direction, is set as the objective of optimizing the part orientation. Genetic algorithm is adopted to find the minimum building height of parts and then ergodic searching is used to get the minimum width of part in y direction. A corresponding program for optimizing part orientation in 3DP was developed. Tests show the proposed approach is effective and fast.

Prediction of Three Dimensional Crack Path Brittle Fracture in Weldment under Dynamic Load

Three dimensional dynamic stress intensity factors are analyzed for a curved crack with a second order perturbation method. The method is extended to obtain an approximate representation of a three dimensional dynamic stress intensity factors at the tip of a curved crack. Due to three dimensional curved crack growth the dynamic energy release rate can be calculated by using the Irwin＇s formula. A three dimensional curved crack in materials with inhomogeneous fracture toughness are considered. Paths of a brittle three dimensional curved crack propagating along a welded joint are predicted via the present method, where the effects of dynamic applied stresses, residual stresses, and material deterioration due to welding are taken into considerations.

Treatment of Wastewater Containing Polyacrylamide Using Three Dimensional Electrodes

A method using three-dimensional electrode is applied to treat wastewater in oil fields, which contains polyacrylamide （PAM）, for analogue. A best condition for electrolysis （I= 1.0 A, t=90 min, c=0.1%, m=980 g,φ=5 mm, d=5.0 cm） has been determined, under which the COD removal efficiency reached 96.0%, COD containing in wastewater reduced to 64.3 mg/L from 1 622.9 mg/L, the figure before treatment. Three categories of PAM-containing wastewater in production practice have been treated with the COD removal ratios being 87.5%, 82.4% and 84.7% respectively. Presence of H2O2 and ·OH are detected by means of Ti（IV）-5-Br-PADAP technique and colorimetry respectively. The concentration is positively proportional to the COD removal ratio and increases in accordance with increment of time of electrolysis and current.

Three dimensional velocity structure and accurate earthquake location in Changning–Gongxian area of southeast Sichuan

In order to understand the crustal structure and tectonic background of the Changning–Gongxiang area, southeastern Sichuan Province, where a series of moderate-to-strong earthquakes occurred in recent years, we utilized the seismic phase data both from a local dense array and from the regional seismic networks;we used the tomoDD program to invert for the high-resolution three-dimensional velocity structure within the depth range of 0–10 km and for accurate hypocentral locations in this area. We analyzed the seismogenic structures for the events of Xingwen M5.7 in 2018 and Gongxian M5.3 and Changning M6.0 in 2019. The results show that:(1) widespread lateral inhomogeneity exists in the velocity structure of the study area, and the location of the velocity anomaly is largely consistent with known structures. In the range of distinguishable depth, the inhomogeneity decreases with increasing depth, and the velocity structure anomalies in some areas are continuous in depth;(2) earthquakes occurred in clusters, showing the characteristics of zonal folding trends in the NW-SE and NE-SW directions;the focal depth in the area is generally shallow in both the sedimentary cap and the crystalline basement. The seismogenic structures of small earthquake clusters are different in size and occurrence in different sections, and the clusters occurred mostly in regions with high P-or S-wave velocities;(3) synthesis of a variety of data suggests that the seismogenic structures of the Xingwen M5.7 and Changning M6.0 earthquakes are associated with slip faults that trend NW-SE in, respectively, the south wing and the axis of the Changning–Shuanghe anticline, while that of the Gongxian M5.3 earthquake is associated with thrust faults that trend N-S in the Jianwu syncline region. The dynamic sources of the three earthquakes are all from the SE pushing of the Qinghai–Tibet block on the Sichuan basin;(4) the risk of future strong earthquakes in this area must be reevaluated in light of the facts(a)that in recent years, moderate-to-strong earthquake swarms have occurred frequently in southeast Sichuan;(b) that the complex structural area exhibits the easy-to-trigger characteristic, and(c) that the small-scale faults in this area are characterized by the phenomenon of stress "lock and release".

Three dimension simulation analysis of the interpass stress and deformation during multipass welding

It has been widely studied about the final residual stress and deformation in muhipass welding of thick weldments. But there is a lack of a clear understanding of the interrelationship of interpass stress and deformation during multipass welding. In this study, a three dimension numerical model of a sixteen-pass double V-groove welded joint with 50 mm plate is developed to compute the stress field and deformation by using multiple CPU parallel processing technology. The following factors such as the non-linear of temperature, heat radiation, filling of material step by step and so on are considered. Distribution and evolution law of welding stress in the transverse and longitudinal section is analyzed in this paper, and the interpnss stresses are studied also. At the same time the evolution course of angular deformation amount is analyzed, and the experimental results show that the calculated resuhs accord with the measured results of angular deformation.

Three dimensional distribution of surfactant in microspheres revealed by synchrotron radiation X-ray microcomputed tomography

This study investigated the formulation mechanism of microspheres via internal surfactant distribution. Eudragit L100 based microspheres loaded with bovine serum albumin were prepared by solid in oil in oil emulsion solvent evaporation method using acetone and liquid paraffin system containing sucrose stearate as a surfactant. The fabricated microspheres were evaluated for encapsulation efficiency, particle size, production yield, and in vitro release characteristics. The internal structures of microspheres were characterized using synchrotron radiation X-ray microcomputed tomography(SR-μCT). The enhanced contrast made the sucrose stearate distinguished from Eudragit to have its three dimensional(3D) distribution. Results indicated that the content and concentration determined the state of sucrose stearate and had significant influences on the release kinetics of protein. The dispersity of sucrose stearate was the primary factor that controlled the structure of the microspheres and further affected the encapsulation efficiency, effective drug loading, as well as in vitro release behavior. In conclusion, the 3D internal distribution of surfactant in microspheres and its effects on protein release behaviors have been revealed for the first time. The highly resolved 3D architecture provides new evidence for the deep understanding of the microsphere formation mechanism.