Influence of symmetric and asymmetric rolling on texture evolution of work-hardened AA 5xxx aluminium alloy

The textures and microstructures of hot-and cold-rolled sheets of an AA 5454 aluminium alloy were studied,with special attention paid to comparing the texture development for the symmetric and asymmetric cold rolling.Scanning electron microscopy with electron-backscatter diffraction was used to monitor the development of the microstructure in the differently deformed and additionally annealed samples.Details of the formations and transformations of individual texture components occurring during the rolling processes were observed and discussed.The average grain sizes,textures and mechanical properties were correlated and explained for the symmetric and asymmetric cold-rolled samples.The asymmetric rolling is beneficial in terms of deep drawability because it reduces the planar anisotropy of the annealed material due to the decrease of the Cube,Goss,rotated-Cube and η-fibre texture components and at the same time strengthens X1-and X2-fibre texture components which are shear texture components and improve deep drawability.During the asymmetric cold rolling,the temperature increases due to friction,triggering recrystallisation processes and leading to larger grains.It is also confirmed that asymmetric cold rolling uses less rolling force and consequently less energy to produce a final material with better formability,particularly earing.

Short-Term Rolling Prediction of Tropical Cyclone Intensity Based on Multi-Task Learning with Fusion of Deviation-Angle Variance and Satellite Imagery

Tropical cyclones(TCs)are one of the most serious types of natural disasters,and accurate TC activity predictions are key to disaster prevention and mitigation.Recently,TC track predictions have made significant progress,but the ability to predict their intensity is obviously lagging behind.At present,research on TC intensity prediction takes atmospheric reanalysis data as the research object and mines the relationship between TC-related environmental factors and intensity through deep learning.However,reanalysis data are non-real-time in nature,which does not meet the requirements for operational forecasting applications.Therefore,a TC intensity prediction model named TC-Rolling is proposed,which can simultaneously extract the degree of symmetry for strong TC convective cloud and convection intensity,and fuse the deviation-angle variance with satellite images to construct the correlation between TC convection structure and intensity.For TCs'complex dynamic processes,a convolutional neural network(CNN)is used to learn their temporal and spatial features.For real-time intensity estimation,multi-task learning acts as an implicit time-series enhancement.The model is designed with a rolling strategy that aims to moderate the long-term dependent decay problem and improve accuracy for short-term intensity predictions.Since multiple tasks are correlated,the loss function of 12 h and 24 h are corrected.After testing on a sample of TCs in the Northwest Pacific,with a 4.48 kt root-mean-square error(RMSE)of 6 h intensity prediction,5.78 kt for 12 h,and 13.94 kt for 24 h,TC records from official agencies are used to assess the validity of TC-Rolling.

Towards a blank design method for manufacturing big-tapered profiled ring disk by spinning-rolling process

The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.

Capillarys 2 Flex Piercing糖化血红蛋白检测系统的综合评估

目的综合评估基于毛细管电泳法的Capillarys 2 Flex Piercing糖化血红蛋白（Hb A1c）检测系统。方法验证Capillarys 2 Flex Piercing Hb A1c检测系统的相关性、精密度和线性范围等基本性能指标,并采用干扰实验评价其抗干扰能力,项目包括胆红素（Bil）、甘油三酯（TG）、血红蛋白（Hb）、不稳定糖化血红蛋白（LA1c）、Hb F和广东地区常见的Hb变异体（Hb E、Hb J-Bangkok、Hb New York、Hb G-Taipei和Hb G-Coushatta）。采用Capillarys 2 Flex Piercing Hb A1c检测系统检测Hb A2,评价其与毛细管电泳法的相关性;采用Capillarys 2 Flex Piercing Hb A1c检测系统测定40份美国国家糖化血红蛋白标准化计划（NGSP）Hb A1c临床实验室认证样本,分析其与NGSP参考实验室结果的差异,验证正确度。结果 Capillarys 2 Flex Piercing Hb A1c检测系统与VariantⅡTurbo 2.0 Hb A1c分析仪的相关性良好（r=0.997,P=0.000）;总精密度[变异系数（CV）]〈2.00%;Hb A1c在3.8%~17.1%范围内呈线性;当Bil≤355μmol/L、TG≤25.3 mmol/L、Hb为28~182 g/L、LA1c为1.2%~7.8%、Hb F≤22.3%时不受干扰;能分离广东地区常见的Hb变异体（Hb E、Hb J-Bangkok、Hb New York、Hb G-Taipei和Hb G-Coushatta）。Capillarys 2 Flex Piercing Hb A1c检测系统检测Hb A2和毛细管电泳法相关性良好（r=0.993,P=0.000）;与NGSP参考实验室结果的偏差均〈6%。结论 Capillarys 2 Flex Piercing Hb A1c检测系统完全能满足临床需求,可同时提供Hb A2的结果用于地中海贫血的筛查,是一种多用途的Hb A1c检测系统。

Progressing under the Exploration:Piercing the Corporate Veil in China

In 2005,the Chinese Company Law was revised for the first time in statutory form introduced Piercing the Corporate Veil.The establishment of this article will benefit Chinese legal system to prevent misuse of company law risk,ensure the safety of transactions,safeguard the interests of the creditors,maintenance social and economic order,and to promote the healthy development of the socialist market economy.Nevertheless,as the abstraction of the provisions,lack of maneuverability,waiting in further refined standstill.

Hydrodynamic characteristics of the surface-piercing propellers for the planing craft

Demand for high-speed marine vehicles (HSMVs) is high among both commercial and naval users. It is the duty of the marine vessel's designer to provide a hull and propulsion system that diminishes drag, improves propulsive efficiency, increases safety and improves maneuverability. From the propulsor side, surface piercing propellers (SPPs) should improve performance. Unlike immersed propellers, behavior of the SPP is affected by depth of immersion, Weber number and shaft inclination angle. This paper uses a practical numerical method to predict the hydrodynamic characteristics of an SPP. The critical advance velocity ratio is derived using the Weber number and pitch ratio in the transition mode, then the potential based boundary element method (BEM) is used on the engaged surfaces. Two models of three and six-bladed SPPs (SPP-1 and SPP-2) were selected and some results are shown.

FEM Analysis of Axisymmetrical Superplastic Piercing Process

In this paper, a superplastic constitutive equation is deduced under the condition of Mises's criterion, and on this basis an FEM fundamental equation for analyzing superplastic materials is derived. The FEM program of axisymmetrical superplaseic deformation SPF1 is set up. The problems of deformation in the axisymmetrical piercing process are analyzed with this program. Finally the deformation regularity of the superplastic hobbing of die cavitcs is analyzed, the result of which will be beneficial to the establishment of relevant process criteria.

Wave Resistance Study of Wave piercing Catamarans

Present paper researches the theoretical method for calculating the wave resistance of wave piercing catamarans.As an example the wave resistance of a wave piercing csatamaran is calculated.The comparison among the theoretical calculation results,the model test results and the diagram evaluation results shows the efficiency of present theoretical method.At last the dependence wave resistance of wave piercing catamarans on some parameters is investigated based on the theoretical method.

Numerical Study of Effects of Complex Topography on Surface-Piercing Wave-Body Interactions

In this paper, wave-body interactions under the effects of complex topography are investigated numerically by a two-phase incompressible Reynolds-Averaged Navier-Stokes(RANS) solver in OpenFOAM. A submerged bottom-standing structure is distributed below the floating body, and the effects of the water depth and top width of the submerged structure on wave-body interactions are studied. The results show that the submerged structure can affect wave loads and roll motion. The vertical force can be amplified on the fixed body when the water depth of the submerged structure is smaller than half of the water depth of the body. The top width significantly affects the vertical force when the top width is smaller than the incident wave length and larger than the body width. For the free-rolling body, roll amplitude can be increased when the ratio of the incident wave length to the water depth of the submerged structure is large enough. On the resonance condition, roll amplitude is slightly reduced by the submerged structure. The effects of the top width on roll amplitude are remarkable when special conditions are fulfilled.

Wave Scattering by Twin Surface-Piercing Plates Over A Stepped Bottom:Trapped Wave Energy and Energy Loss

To evaluate the trapped wave energy and energy loss, the problem of wave scattering by twin fixed vertical surface- piercing plates over a stepped bottom is numerically simulated using the open source package OpenFOAM and the associated toolbox waves2Foam. The volume of fluid (VOF) method was employed to capture the free surface in the time domain. The validation of the present numerical model was performed by comparing with both the analytical and experimental results. The effects of the spacing between two plates and the configuration of stepped bottom on the hydrodynamic characteristics, such as reflection and transmission coefficients, viscous dissipation ratio, and relative wave height between the plates (termed as trapped wave energy), were examined. Moreover, the nonlinear effects of the incident wave height on the hydrodynamic characteristics were addressed as well. The results show that the step configuration can be tuned for efficient-performance of wave damping, and the optimum configurations of the step length B, the step height h1 and the spacing b, separately equaling λ/4, 3h/4, and 0.05h (λ and h are the wavelength and the water depth, respectively), are recommended for the trapping of wave energy.

Original Support of an after Piercing Lobular Keloid Scar: About a Case

Keloids are tissue repair formed by exuberant fibrosis appearing after a skin wound, burn, vaccination or post inflammatory (folliculitis or acne lesion). This condition causes standard aesthetic prejudice to those who are affected. Its management is difficult and its evolution meshes recurrences. We report here a case of giant keloid in the right ear lobe after a piercing and its support.

Pulsed current-assisted twelve-roll precision rolling deformation of SUS304 ultra-thin strips with exceptional mechanical properties

Innovative pulsed current-assisted multi-pass rolling tests were conducted on a 12-roll mill during the rolling deformation processing of SUS304 ultra-thin strips.The results show that in the first rolling pass,the rolling reduction rate of a conventionally rolled sample(at room temperature)is 33.8%,which can be increased to 41.5%by pulsed current-assisted rolling,enabling the formation of an ultra-thin strip with a size of 67.3μm in only one rolling pass.After three passes of pulsed current-assisted rolling,the thickness of the ultra-thin strip can be further reduced to 51.7μm.To clearly compare the effects of a pulsed current on the microstructure and mechanical response of the ultra-thin strip,ultra-thin strips with nearly the same thickness reduction were analyzed.It was found that pulsed current can reduce the degree of work-hardening of the rolled samples by promoting dislocation detachment,reducing the density of stacking faults,inhibiting martensitic phase transformation,and shortening the total length of grain boundaries.As a result,the ductility of ultra-thin strips can be effectively restored to approximately 16.3%while maintaining a high tensile strength of 1118 MPa.Therefore,pulsed current-assisted rolling deformation shows great potential for the formation of ultra-thin strips with a combination of high strength and ductility.

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying alloys.In this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot rolling.The microstructure and mechanical properties under different process paramet-ers were investigated.Optical microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening mechanism.The results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering temperature.The block was hot rolled at 1200℃ with an 80%reduction under only two passes without annealing.The strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain boundaries.After hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

Tailoring the texture and mechanical properties of 3%Y_(2)O_(3)p/ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing

3%Y_(2)O_(3)p/ZGK200 composites were subjected to unidirectional rolling(UR)and cross rolling(CR)at 400℃and 350℃followed by annealing at 300℃for 1 h.The microstructure,texture and mechanical properties of rolled and annealed composites were systematically studied.The rolled composites exhibited a heterogeneous microstructure,consisting of deformed grains elongated along rolling direction(RD)and Y_(2)O_(3)particles bands distributed along RD.After annealing,static recrystallization(SRX)occurred and most deformed grains transformed into equiaxed grains.A non-basal texture with two strong T-texture components was obtained after UR while a non-basal elliptical/circle texture with circle multi-peaks was obtained after CR,indicating that rolling path had great influences on texture of the composites.After annealing process,R-texture component disappeared or weakened,as results,a non-basal texture with double peaks tilting from normal direction(ND)to transverse direction(TD)and a more random non-basal texture with circle multi-peaks were obtained for UR and CR composites,respectively.The yield strength of rolled composites after UR showed obvious anisotropy along RD and TD while a low anisotropic yield strength was obtained after CR.Some Y_(2)O_(3)particles broke during rolling.The fracture of the composites was attributed to the existence of Y_(2)O_(3)clusters and interfacial debonding between particles and matrix during tension,as a result,the ductility was not as superior as matrix alloy.

Creep properties of bimetal Al/SiC/Cu compositesfabricated via accumulative roll bonding process

In the present study,microstructural evolution,mechanical and creep properties of Al/SiC/Cu composite stripsfabricated via accumulative roll bonding(ARB)process were studied.The obtained results showed the formation of anatomic diffusion layer with thickness of about 17μm at the interface during the ARB under three creep loadingconditions namely 30 MPa at 225℃,35 MPa at 225℃,and 35 MPa at 275℃.An generated intermetallic compoundresulted in a 40%increase of interface thickness near Al.The stress level decreased by 13%at constant temperature withno signi fi cant effect on the interface thickness,and the creep failure time declined by 44%.It was observed that atconstant temperatures,the second slope of the creep curve reached to 39%with increasing stress level,then,it dropped to2%with a little temperature rising.After creep test under 35 MPa at 275℃,the sample displays the presence of 60%Aland 40%Cu,containing brittle Al_(2)Cu intermetallic compound at the interface.Applied temperature and stress had effecton the creep properties,specially increasing the slope of creep curves with higher stresses.

Unveiling the rolling texture variations ofα-Mg phases in a dual-phase Mg-Li alloy

LZ91 Mg-Li alloy plates with three types of initial texture were rolled by 70%reduction at both room temperature and 200℃to explore the rolling texture formation ofα-Mg phase.The results showed that the rolling texture is largely affected by the initial texture.All the samples exhibited two main texture components as RD-split double peaks texture and TD-split double peaks texture after large strain rolling.The intensity of the two texture components was strongly influenced by the initial orientation and rolling temperature.Extension twinning altered the large-split non-basal orientation to a near basal one at low rolling strain.The basal orientation induced by twinning is unstable,which finally transmitted to the RD-split texture.The strong TD-split texture formed due to slip-induced orientation transition from its initial orientation.The competition between prismatic and basal slip determined the intensity and tilt angle of the TD-split texture.By increasing the rolling temperature,the TD-split texture component was enhanced in all three samples.Limitation of extension twinning behavior and the promotion of prismatic slip at elevated temperature are the main reasons for the difference in hot and cold rolling texture.

Influence of prefabricated steel/aluminum composite panel temperature on interface and microstructure properties of rolled steel-aluminum transition joint

Based on the two-pass differential temperature rolling bonding method,the effects of prefabricated steel/aluminum composite panel temperature on interface characteristics and microstructure properties were investigated through experimental analysis and finite element simulations.When the temperature exceeds 400℃,the effective preparation of the steel-aluminum transition joint can be achieved,and with the increase in temperature,the interface shear and pull-off strength of the steel-aluminum transition joint exhibits an initial decrease followed by an increase.Both the interface shear and pull-off fractures are in 1060 aluminum matrix.As the temperature increases,the size of the average grain in 1060 aluminum matrix increases and then decreases.When the temperature reaches 550℃,the comprehensive performance of the prepared steel-aluminum transition joint is the best,with the interface shear strength of 77 MPa and the interface pull-off strength of 153 MPa,exceeding the bonding strength of the explosive compounding method.There are no pinholes,wrinkles,or cracks in the lateral bending matrix and the interface.

Oblique Wave Trapping by a Surface-Piercing Flexible Porous Barrier in the Presence of Step-Type Bottoms

The present study deals with the oblique wave trapping by a surface-piercing flexible porous barrier near a rigid wall in the presence of step-type bottoms under the assumptions of small amplitude water waves and the structural response theory in finite water depth.The modified mild-slope equation along with suitable jump conditions and the least squares approximation method are used to handle the mathematical boundary value problem.Four types of edge conditions,i.e.,clamped-moored,clamped-free,moored-free,and moored-moored,are considered to keep the barrier at a desired position of interest.The role of the flexible porous barrier is studied by analyzing the reflection coefficient,surface elevation,and wave forces on the barrier and the rigid wall.The effects of step-type bottoms,incidence angle,barrier length,structural rigidity,porosity,and mooring angle are discussed.The study reveals that in the presence of a step bottom,full reflection can be found periodically with an increase in(i)wave number and(ii)distance between the barrier and the rigid wall.Moreover,nearly zero reflection can be found with a suitable combination of wave and structural parameters,which is desirable for creating a calm region near a rigid wall in the presence of a step bottom.

Effects of cold rolling path on recrystallization behavior and mechanical properties of pure copper during annealing

The recrystallization behavior,grain boundary characteristic distribution,and mechanical properties of pure Cu sheets that were subjected to different cold rolling paths,and then annealed at 400°C for 10,30,60,and 420 min,were investigated.Different rolling paths changed the grain boundary orientations of cold-rolled copper,causing recrystallized grains to nucleate and grow in an oriented manner.However,the evolution of the texture indicated that cold-rolled copper with different rolling paths did not show an obvious preferred orientation after annealing.The RD-60 specimen exhibited the smallest grain size(6.6μm).The results indicated that the grain size and low-ΣCSL grain boundaries worked together to provide RD-60 samples with appropriate mechanical properties and high plasticity.The yield strength,ultimate tensile strength,and elongation of RD-60 sample were 81 MPa,230 MPa,and 49%,respectively.These results could provide guidance for tuning the microstructures and properties of pure Cu foils,as well as designing fabrication routes for pure Cu foils through processes such as rolling and drawing.

Effect of annealing temperature on microstructure and mechanical properties of Mg-Zn-Zr-Nd alloy with large final rolling deformation

In this study,the Mg-3Zn-0.5Zr-χNd(χ=0,0.6)alloys were subjected to final rolling treatment with large deformation of 50%.The impact of annealing temperatures on the microstructure and mechanical properties was investigated.The rolled Mg-3Zn-0.5Zr-0.6Nd alloy exhibited an ultimate tensile strength of 386 MPa,a yield strength of 361 MPa,and an elongation of 7.1%.Annealing at different temperatures resulted in reduced strength and obviously increased elongation for both alloys.Optimal mechanical properties for the Mg-3Zn-0.5Zr-0.6Nd alloy were achieved after annealing at 200℃,with an ultimate tensile strength of 287 MPa,a yield strength of 235 MPa,and an elongation of 26.1%.The numerous deformed microstructures,twins,and precipitated phases in the rolled alloy could impede the deformation at room temperature and increase the work hardening rate.After annealing,a decrease in the work hardening effect and an increase in the dynamic recovery effect were obtained due to the formation of fine equiaxed grains,and the increased volume fraction of precipitated phases,which significantly improved the elongation of the alloy.Additionally,the addition of Nd element could enhance the annealing recrystallization rate,reduce the Schmid factor difference between basal and prismatic slip systems,facilitate multi-system slip initiation and improve the alloy plasticity.