Research of Three-Dimensional Fluorescence Spectra of RE^(3+)(RE=Eu,Tb) and Na_2WO_4 Co-doped Silica Luminescence Materials

In the preparation of this precursor tetraethlortho silicate (TEOS), sodium tungstate, ethyl alcohol, HCl and RECl3(RE=Eu,Tb) were mixed and then heated at 800 ℃ for 2 h, leading to a luminescent compound. The structure of the materials was characterized by TG-DTA and IR analysis, and the results indicate that the materials were in SiO2 network structure. Three-dimensional fluorescence spectra was used to characterize the luminescent properties of the materials. The luminescence property of doped and un-doped Eu3+or Tb3+ and Na2WO4 in silica materials were prepared and measured. The results show that good energy transfer from WO2-4 to Eu3+ ion, sensitized the luminescence intensity of Eu3+ remarkably. Tb3+ ion incorporated silica materials expressed the inverse energy transition from Tb3+ to WO2-4, however, we got the materials with homogeneous green blue fluorescent light. Finally, the energy transfer of WO2-4 and Eu3+, WO2-4 and Tb3+ were explained by energy levels diagram.

Three-dimensional fluorescence characteristics of dissolved organic matter produced by Prorocentrum donghaiense Lu

Filtration and cross-flow ultrafiltration techniques were used to separate culture media of Prorocentrurn donghaiense at the exponential growth, stationary and decline stages into 〈0.45 μm filtrate, 100 kDa-0.45 μm, 1%100 kDa and 1-10 kDa retentate and 〈1 kDa ultrafiltrate fractions. The fluorescence properties of different molecular weights of dissolved organic matter （DOM） were measured by excitation-emission matrix spectra. Protein-like and humic-like fluorophores were observed in the DOM produced by P. donghaiense. The central positions of protein-like fluorophores showed a red shift with prolonged growth duration, shifting from tyrosine-like properties at the exponential growth stage to tryptophan-like properties at the stationary and decline stages. The excitation wavelengths of protein-like fluorophores exhibited some change in the exponential growth and stationary stages with increased molecular size, but showed little change in the decline stage. However, the emission wavelengths in the decline stage exhibited a blue shift. Very distinct C type and A type peaks in humic-like fluorophores were observed. With a prolonged culture time, the intensities of both of the peaks became strong and the excitation wavelengths of peak A showed a red shift, while the A：C ratios fell. More than 94% of fluorescent DOM was in the lower than 1 kDa molecular weight fraction.

Study on the Binding Interaction of Nanomaterials Tio_2 with Bovine Serum Albumin by Three-Dimensional Fluorescence Spectrometry (TDFS)

Although scientific and policy bodies have stated that nanomaterials are not intrinsically toxic, there is interest in evaluating if and how many engineered nanomaterials may do harm to the health of mankind and the ecological environment. The interaction between nano-TiO2 and bovine serum albumin (BSA) was studied by using TDFS and UV methods in this research.

Three-dimensional fluorescence spectral characterization of soil dissolved organic matters in the fluctuating water-level zone of Kai County,Three Gorges Reservoir

Three-dimensional fluorescence spectroscopy was used to investigate the fluorescent properties of soil dissolved organic matter(DOM)in the water-levelfluctuation zone(WLFZ)of Kai County,Three Gorges Reservoir(TGR).Most of the soil DOM analyzed in this study was found to contain four fluorescence peaks.Peaks A and C represent humic-like fluorescence,whereas peaks B and D represent tryptophan-like fluorescence.Peaks E and F,which represent tyrosine-like fluorescence,only appeared in certain soils.Soil humus was the main source of DOM in soil,and higher concentration of soil DOM was found in the exposed soil than submerged soil.Compared to the peaks A and B,the fluorescence intensities of peaks C and D were strongly influenced by the fluctuating water level.Analysis of fluorescence intensities of different peaks in soil DOM showed that WLFZ soil was not contaminated significantly.Soil DOM contained at least two types of humic-like fluorescence groups and two types of protein-like fluorescence groups.The proportion of the content of peak A in soil organic matter was quite stable.The soil DOM in exposed soil had relatively high humification and aromaticity,and periodic submerging and exposure of soil had an impact on the humification of soil DOM.

Protein conformation in solution by three-dimensional fluorescence spectrometry

The conformations of bovine serum albumin (USA) and egg albumin (EA) in solution and their conformation changes under different conditions were studied by using three-dimensional fluorescence spectrometry (TDFS) such as three-dimensional fluorescence (TDF) spectra and three-dimensional fluorescence polarization (TDFP) spectra with tryptophan residues in protein molecules as an intrinsic fluorescent probe. The results show that the microenvironment of tryptophan residues of protein molecules in various solutions can be directly indicated and TDFS is an effective tool for studying protein conformation in solution. Meantime, some valuable results were obtained.

Determination of Luzhou-flavor liquor ages by three-dimensional fluorescence spectroscopy combined with NMF

The determination of Luzhou-flavor liquor ages is carried out by three-dimensional fluorescence spectroscopy combined with non-negative matrix factorization(NMF). 37 samples of aged liquors with weighted ages of 15, 20 and 25 years were prepared by blending three Luzhou-flavor original base liquors with storage ages of 10, 20 and 30 years in different proportions. The fluorescence spectra of the samples were measured, and then factorized into basis matrix and coefficients matrix by multiplicative iterative NMF. The fluorescence spectra, reconstructed from the basis matrix, are similar to the original spectra. The coefficients matrix is taken as the input of support vector machine(SVM) to establish a prediction model for the determination of liquor ages. Compared with the principal component analysis, the prediction model based on SVM has a predicted accuracy better than 91.7%. This method can provide helps for the market supervision on the aged liquors.

Comparison of three-dimensional fluorescence analysis methods for predicting formation of trihalomethanes and haloacetic acids

This work investigated the application of several fluorescence excitation–emission matrix analysis methods as natural organic matter（NOM） indicators for use in predicting the formation of trihalomethanes（THMs） and haloacetic acids（HAAs）. Waters from four different sources（two rivers and two lakes） were subjected to jar testing followed by 24 hr disinfection by-product formation tests using chlorine. NOM was quantified using three common measures： dissolved organic carbon, ultraviolet absorbance at 254 nm, and specific ultraviolet absorbance as well as by principal component analysis, peak picking,and parallel factor analysis of fluorescence spectra. Based on multi-linear modeling of THMs and HAAs, principle component（PC） scores resulted in the lowest mean squared prediction error of cross-folded test sets（THMs： 43.7（μg/L）^2, HAAs： 233.3（μg/L）^2）. Inclusion of principle components representative of protein-like material significantly decreased prediction error for both THMs and HAAs. Parallel factor analysis did not identify a protein-like component and resulted in prediction errors similar to traditional NOM surrogates as well as fluorescence peak picking. These results support the value of fluorescence excitation–emission matrix–principal component analysis as a suitable NOM indicator in predicting the formation of THMs and HAAs for the water sources studied.

Total integration method of three-dimensional fluorescence spectrometry

THREE-dimensional fluorescence spectrometry (TDFS) is a new technique of spectrofluorimetry that was developed two decades ago.Making use of the abundant information

Study on DNA conformation using three-dimensional fluorescence spectra of ethidium bromide

Three-dimensional fluorescence (TDF) spectra of ethidium bromide (EB) in various environments, such as different types of micelle and glycerol solution, have recentiy been studied. In this note, the TDF spectra of EB are used to study the conformation change of calf thymus (CT) DNA and fish sperm (FS) DNA in different conditions.The results show that the TDF spectra of EB can not only be used to fingerprint CT DNA and FS DNA, but also effectively explain the interaction between EB and DNA and indicate the conformation change of DNA in different conditions.

A method for calibrating the confocal volume of a confocal three-dimensional micro-x-ray fluorescence setup

The measurement of the confocal volume of a confocal three-dimensional micro-x-ray fluorescence(3D-XRF)setup is a key step in the field of confocal 3D-XRF analysis.With the development of x-ray facilities and optical devices,3D-XRF analysis with a micro confocal volume will create a great potential for 2D and 3D microstructural analysis and accurate quantitative analysis.However,the classic measurement method of scanning metal foils of a certain thickness leads to inaccuracy.A method for calibrating the confocal volume is proposed in this paper.The new method is based on the basic content of the textbook,and the theoretical results and the feasibility are given in detail for the 3D-XRF mono-chromatic x-ray condition and the poly-chromatic x-ray condition.We obtain a set of experimental confirmation using the poly-chromatic x-ray tube in the laboratory.It is proved that the sensitivity factor of the 3D-XRF can be directly and accurately obtained in a real calibration process.

Three-dimensional fluorescence spectral characteristics of dissolved organic carbon in cave drip waters and their responses to environment changes: Four cave systems as an example in Guizhou Province, China

Understanding the responses of fluorescence spectral characteristics of cave drip waters to modern environment and climate changes is key to the reconstructions of environmental and climatic changes using fluorescence spectral characteristics of speleothems. The fluorescence spectral characteristics of dissolved organic carbon (DOC) in four active cave systems were analyzed with a three-dimensional (3D) fluorescence spectral analysis method. We found that the fluorescence types of DOC were mainly of fulvic-like and protein-like fluorescences, both in soil waters and cave drip waters. The intensity of fulvic-like fluorescence was positively correlated with the concentrations of DOC, suggesting that the DOC of cave drip waters was derived from the overlying soil layer of a cave system. Compared with the other cave systems, the variation range of the excitation and emission wavelengths for fulvic-like fluorescence of cave drip waters in Liangfeng cave system that had forest vegetation was smaller and the excitation wavelength was longer, while its fluorescence intensity varied significantly. By contrast, the excitation and emission wavelengths and fluorescence intensity for that in Jiangjun cave system that had a scrub and tussock vegetation showed the most significant variation, while its excitation wavelength was shorter. This implies that the variation of vegetation overlying a cave appears to be a factor affecting the fluorescence spectral characteristics of cave drip waters.

Synthesis,Crystal Structure and Fluorescence of a Three-dimensional Cd(II) Coordination Polymer [Cd(μ_(1,3)- SCN^-)_2(μ-dmpo)]_n (dmpo = 3,5-Dimethylpyridine N-Oxide)

A three-dimensional complex [Cd（μ1,3-SCN）2（dmpo）]n has been synthesized with μ1,3-SCN^- and dmpo as mixed bridge ligands. The crystal belongs to monoclinic, space group C2/c with a = 15.648（2）, b = 15.126（2）, c = 11.9773（15） A, β= 112.416（2）°, V= 2620.7（6） ,A, Z= 8, C9H9CdN3OS2, Mr = 351.71, Dc = 1.783 g/cm^3, F（000） = 1376 and μ = 1.967 mm^-1. The structure was refined to R = 0.0260 and wR = 0.0647 for 2186 observed reflections （I 〉 2σ（I））. In the crystal the Cd（Ⅱ） ions are coordinated by ,μ1,3-SCN^- bridge ligands to form the crossing chains on the adjacent planes, and these chains are further joined by μ-dmpo mono-dentate bridge ligands leading to a three-dimensional structure. The complex exhibits strong fluorescent emission property.

A theory for three-dimensional response of micropolar plates

Through combined applications of the transfer-matrix method and asymptotic expansion technique,we formulate a theory to predict the three-dimensional response of micropolar plates.No ad hoc assumptions regarding through-thickness assumptions of the field variables are made,and the governing equations are two-dimensional,with the displacements and microrotations of the mid-plane as the unknowns.Once the deformation of the mid-plane is solved,a three-dimensional micropolar elastic field within the plate is generated,which is exact up to the second order except in the boundary region close to the plate edge.As an illustrative example,the bending of a clamped infinitely long plate caused by a uniformly distributed transverse force is analyzed and discussed in detail.

Oxygen tension modulates cell function in an in vitro three-dimensional glioblastoma tumor model

Hypoxia is a typical feature of the tumor microenvironment,one of the most critical factors affecting cell behavior and tumor progression.However,the lack of tumor models able to precisely emulate natural brain tumor tissue has impeded the study of the effects of hypoxia on the progression and growth of tumor cells.This study reports a three-dimensional(3D)brain tumor model obtained by encapsulating U87MG(U87)cells in a hydrogel containing type I collagen.It also documents the effect of various oxygen concentrations(1%,7%,and 21%)in the culture environment on U87 cell morphology,proliferation,viability,cell cycle,apoptosis rate,and migration.Finally,it compares two-dimensional(2D)and 3D cultures.For comparison purposes,cells cultured in flat culture dishes were used as the control(2D model).Cells cultured in the 3D model proliferated more slowly but had a higher apoptosis rate and proportion of cells in the resting phase(G0 phase)/gap I phase(G1 phase)than those cultured in the 2D model.Besides,the two models yielded significantly different cell morphologies.Finally,hypoxia(e.g.,1%O2)affected cell morphology,slowed cell growth,reduced cell viability,and increased the apoptosis rate in the 3D model.These results indicate that the constructed 3D model is effective for investigating the effects of biological and chemical factors on cell morphology and function,and can be more representative of the tumor microenvironment than 2D culture systems.The developed 3D glioblastoma tumor model is equally applicable to other studies in pharmacology and pathology.

Three-dimensional cell-based strategies for liver regeneration

Liver regeneration and the development of effective therapies for liver failure remain formidable challenges in modern medicine.In recent years,the utilization of 3D cell-based strategies has emerged as a promising approach for addressing these urgent clinical requirements.This review provides a thorough analysis of the application of 3D cell-based approaches to liver regeneration and their potential impact on patients with end-stage liver failure.Here,we discuss various 3D culture models that incorporate hepatocytes and stem cells to restore liver function and ameliorate the consequences of liver failure.Furthermore,we explored the challenges in transitioning these innovative strategies from preclinical studies to clinical applications.The collective insights presented herein highlight the significance of 3D cell-based strategies as a transformative paradigm for liver regeneration and improved patient care.

NIR-II fluorescence imaging in liver tumor surgery: A narrative review

In liver tumor surgery,the recognition of tumor margin and radical resection of microcancer focis have always been the crucial points to reduce postoperative recurrence of tumor.However,naked-eye inspection and palpation have limited effectiveness in identifying tumor boundaries,and traditional imaging techniques cannot consistently locate tumors in real time.As an intraoperative real-time navigation imaging method,NIRfluorescence imaging has been extensively studied for its simplicity,reliable safety,and superior sensitivity,and is expected to improve the accuracy of liver tumor surgery.In recent years,the research focus of NIRfluorescence has gradually shifted from the-rst near-infrared window(NIR-I,700–900 nm)to the second near-infrared window(NIR-II,1000–1700 nm).Fluorescence imaging in NIR-II reduces the scattering effect of deep tissue,providing a preferable detection depth and spatial resolution while signi-cantly eliminating liver autofluorescence background to clarify tumor margin.Developingfluorophores combined with tumor antibodies will further improve the precision offluorescence-guided surgical navigation.With the development of a bunch offluorophores with phototherapy ability,NIR-II can integrate tumor detection and treatment to explore a new therapeutic strategy for liver cancer.Here,we review the recent progress of NIR-IIfluorescence technology in liver tumor surgery and discuss its challenges and potential development direction.

Three-dimensional visualization technology for guiding one-step percutaneous transhepatic cholangioscopic lithotripsy for the treatment of complex hepatolithiasis

BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy(PTCSL).AIM To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation(PTOBF)technique guided by three-dimensional(3D)visualization.METHODS This was a retrospective,single-center study analyzing,140 patients who,between October 2016 and October 2023,underwent one-step PTCSL for hepatolithiasis.The patients were divided into two groups:The 3D-PTOBF group and the PTOBF group.Stone clearance on choledochoscopy,complications,and long-term clearance and recurrence rates were assessed.RESULTS Age,total bilirubin,direct bilirubin,Child-Pugh class,and stone location were similar between the 2 groups,but there was a significant difference in bile duct strictures,with biliary strictures more common in the 3D-PTOBF group(P=0.001).The median follow-up time was 55.0(55.0,512.0)days.The immediate stone clearance ratio(88.6%vs 27.1%,P=0.000)and stricture resolution ratio(97.1%vs 78.6%,P=0.001)in the 3D-PTOBF group were significantly greater than those in the PTOBF group.Postoperative complication(8.6%vs 41.4%,P=0.000)and stone recurrence rates(7.1%vs 38.6%,P=0.000)were significantly lower in the 3D-PTOBF group.CONCLUSION Three-dimensional visualization helps make one-step PTCSL a safe,effective,and promising treatment for patients with complicated primary hepatolithiasis.The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis.This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.

The combined application of stem cells and three-dimensional bioprinting scaffolds for the repair of spinal cord injury

Spinal cord injury is considered one of the most difficult injuries to repair and has one of the worst prognoses for injuries to the nervous system.Following surgery,the poor regenerative capacity of nerve cells and the generation of new scars can make it very difficult for the impaired nervous system to restore its neural functionality.Traditional treatments can only alleviate secondary injuries but cannot fundamentally repair the spinal cord.Consequently,there is a critical need to develop new treatments to promote functional repair after spinal cord injury.Over recent years,there have been seve ral developments in the use of stem cell therapy for the treatment of spinal cord injury.Alongside significant developments in the field of tissue engineering,three-dimensional bioprinting technology has become a hot research topic due to its ability to accurately print complex structures.This led to the loading of three-dimensional bioprinting scaffolds which provided precise cell localization.These three-dimensional bioprinting scaffolds co uld repair damaged neural circuits and had the potential to repair the damaged spinal cord.In this review,we discuss the mechanisms underlying simple stem cell therapy,the application of different types of stem cells for the treatment of spinal cord injury,and the different manufa cturing methods for three-dimensional bioprinting scaffolds.In particular,we focus on the development of three-dimensional bioprinting scaffolds for the treatment of spinal cord injury.

Virtual and augmented reality systems and three-dimensional printing of the renal model—novel trends to guide preoperative planning for renal cancer

ObjectiveThis study aimed to explore the applications of three-dimensional (3D) technology, including virtual reality, augmented reality (AR), and 3D printing system, in the field of medicine, particularly in renal interventions for cancer treatment.MethodsA specialized software transforms 2D medical images into precise 3D digital models, facilitating improved anatomical understanding and surgical planning. Patient-specific 3D printed anatomical models are utilized for preoperative planning, intraoperative guidance, and surgical education. AR technology enables the overlay of digital perceptions onto real-world surgical environments.ResultsPatient-specific 3D printed anatomical models have multiple applications, such as preoperative planning, intraoperative guidance, trainee education, and patient counseling. Virtual reality involves substituting the real world with a computer-generated 3D environment, while AR overlays digitally created perceptions onto the existing reality. The advances in 3D modeling technology have sparked considerable interest in their application to partial nephrectomy in the realm of renal cancer. 3D printing, also known as additive manufacturing, constructs 3D objects based on computer-aided design or digital 3D models. Utilizing 3D-printed preoperative renal models provides benefits for surgical planning, offering a more reliable assessment of the tumor's relationship with vital anatomical structures and enabling better preparation for procedures. AR technology allows surgeons to visualize patient-specific renal anatomical structures and their spatial relationships with surrounding organs by projecting CT/MRI images onto a live laparoscopic video. Incorporating patient-specific 3D digital models into healthcare enhances best practice, resulting in improved patient care, increased patient satisfaction, and cost saving for the healthcare system.