NON-CONTACT MEASUREMENT SYSTEM OF FREEFORM SURFACE AND NURBS RECONSTRUCTION OF MEASUREMENT POINTS

Based on the development of the non-contact measurement system of free-formsurface, NURBS reconstruction of measurement points of freeform surface is effectively realized bymodifying the objective function and recursive procedure and calculating the optimum number ofcontrol points. The reconstruction precision is evaluated through Ja-cobi's transformation method.The feasibility of the measurement system and effectiveness of the reconstruction algorithm aboveare proved by experiment.

Non-contact measurement and multi-objective analysis of drilling temperature when drilling B_4C reinforced aluminum composites

Non-contact measurements of machining temperatures were performed with optical pyrometer when drilling particle（B4C） reinforced metal matrix composites（MMCs） with different drills. The effect of particle content, cutting speed, feed rate and tool material on the maximum drilling temperature was investigated. The drilling parameters were optimized based on multiple performance characteristics in terms of the maximum cutting temperature and tool wear. According to the results, the most influential control factors on the cutting temperatures are found to be particle fraction, feed rate and interaction between the cutting speed and particle content, respectively. The influences of the cutting speed and drill material on the drilling temperature are found to be relatively lower for the used range of parameters. Minimum cutting temperatures are obtained with lower particle fraction and cutting speed, with relatively higher feed rates and carbide tools. The results reveal that optimal combination of the drilling parameters can be used to obtain both minimum cutting temperature and tool wear.

Machine Vision for Non-Contact Automated Countersink Measurement

The slug rivet is widely used in wing assembly due to its longer fatigue life and better sealing performance compared with other connection technologies.As a countersink with dual-angle is widely adopted for this type of connection,the countersink diameter and depth are key factors that affect assembly quality.Therefore,it is of great importance to efficiently inspect the countersink quality to ensure high accuracy.However,contact measurements are susceptible to the loss of accuracy due to cutting debris and lube build-up,while the hole-scanning method using laser profilometry is time consuming and complex.In this paper,a non-contact method for countersink diameter and depth measurement based on a machine vision system is proposed.The countersink diameter can be directly measured by the machine vision system,while the countersink depth is determined through the countersink diameter indirectly.First,by means of image processing technology together with an improved edge detection algorithm,the countersink diameter can be obtained.Then,a 3D microscope is employed to measure the countersink depth,which helps to model the countersink.As a result,once the countersink diameter is measured,so is the depth.The experimentation demonstrated that this method has strong feasibility and enables time saving,which is conducive to improve the riveting efficiency.

A LASER-SCANNING NON-CONTACT MEASURING METHOD FOR ROUNDNESS ERRORS

利用激光狭缝扫描原理和光电传感技术，提出了一种用于测量大型回转体类零件圆度误差的激光扫描非接触测量方法和测量系统。本文详细论述了测量系统及其测量原理、工件安装偏心误差的分离技术和计算机实时数据处理系统，实验结果证实了这种测量方法的可行性。

Accurate Measurement Method for Tube's Endpoints Based on Machine Vision

Tubes are used widely in aerospace vehicles, and their accurate assembly can directly affect the assembling reliability and the quality of products. It is important to measure the processed tube＇s endpoints and then fix any geometric errors correspondingly. However, the traditional tube inspection method is time-consuming and complex operations. Therefore, a new measurement method for a tube＇s endpoints based on machine vision is proposed. First, reflected light on tube＇s surface can be removed by using photometric linearization. Then, based on the optimization model for the tube＇s endpoint measurements and the principle of stereo matching, the global coordinates and the relative distance of the tube＇s endpoint are obtained. To confirm the feasibility, ll tubes are processed to remove the reflected light and then the endpoint＇s positions of tubes are measured. The experiment results show that the measurement repeatability accuracy is 0.167 mm, and the absolute accuracy is 0.328 ram. The measurement takes less than 1 min. The proposed method based on machine vision can measure the tube＇s endpoints without any surface treatment or any tools and can realize on line measurement.

Deep-Hole Inner Diameter Measuring System Based on Non-contact Capacitance Sensor

A precise aperture measuring system of small deep holes with capacitance sensors is presented. Based on the working principle of non-contact capacitance sensors, influence of the edge effect of gauge head is studied, and one capacitance sensor for measuring the aperture of the small blind holes or through holes is introduced. The system is composed of one positioning device, one aperture measuring capacitance sensor, one measuring circuit, and software. This system employs visual CCD and two-dimensional mic...

Study on Coaxiality Measurement System of Compound Gear Shaft Based on Non⁃contact Optic

Aiming at the shortcomings of traditional contact measurement methods such as low measurement efficiency,high cost and low accuracy,a non-contact optical measurement method based on the laser displacement sensor is proposed.According to the relevant regulations of the coaxiality error evaluation standard and the structural characteristics of the compound gear shaft,we have designed and built a set of supporting software system as well as a hardware test platform.In this paper,the distance difference threshold and scale threshold methods are used to eliminate outlier data.The least squares circle is selected to calculate the center of the circle and the minimum containment cylinder axis method is used as the reference axis of the composite gear shaft.Compensated by the standard step shaft calibration,the coaxiality error of the composite gear shaft can be measured to be within 0.01 mm in less than two minutes.The range value of the multi-section measurement test is 0.065 mm.The average coaxiality error is∅0.476 mm.

Application of Three-dimensional Body Measurement System

The configuration principles and functions of the non-contact three-dimensional （3D） body measurement system （BMS） developed by the Textile/Clothing Technology Corporation （[TC]^2） are described in this paper. The advantages of this new system, compared with traditional contact body measurement instruments （ Martin instruments ） are discussed by selecting 40 female undergraduates of Donghna University as the scan objects. In the experiments both the Martin instruments and [TC]^2 BMS were used respectively. According to the data of different position （Bust Circumference, Full Waist, Full Hips, Bust Height, Front Waist Height and Back Waist Height） obtained from both of the methods we can get the correlation coefficient which is close to 1, indicating that the results of both methods have comparability. Finally some suggestions for the further applications of the non-contact BMS in the apparel development of China are given.

Three-Dimensional Measurement and Reconstruction of Fabric Drape Shape

This paper introduces a new method of measuring the three-dimensional drape shape of fabrics with structural light. First, we apply parallel annular structural light to form light and shade alternating contour stripes on the surface of fabrics. We then collect the images of contour stripes using Charge Coupled Device (CCD). Subsequently, we process the images to identify the contour stripes and edges of fabrics, and obtain the fabric contour lines of curved surfaces. Finally, we apply three-dimensional curved surface modeling method based on a network of polar coordinates, and reconstruct the three-dimensional drape shape of fabrics. Experiments show that our method is effective in testing and reconstructing three-dimensional drape shape of fabrics.

A Novel Approach for Warhead Fragments Velocity Measurement Based on Laser Screen

The velocity of warhead fragment is key criteria to determine its mutilation efficiency.We have designed an optoelectronic system to accurately measure the average velocity of warhead fragments.The apparatus including two parallel laser screens spaced apart at a known fixed distance for providing time measurement start and stop signals.The large effective screen area is formed by laser source,retro-reflector and large area photo-diode with a central hole.Whenever a moving fragment interrupts two optical screen,the corresponding photometers senses the event,due to partial obscuration of the incident energy.Experiments have been performed to measure velocity of the different kinds of projectiles and fragments within various size and velocity ranges,including 7.62 mm bullet shooting experiments,prefabricated steel-ball exploding experiments.They were proved that the system is adequate to measure the velocity of larger than 5 mm,less than 1 000 m/s in the range,when fixed trajectory,test the velocity of the projectile average relative deviation is less than 4.21%.The system can perform satisfactorily with a lot of advantages such as larger effective light screen area,quick response speed,low uncertainty,strong repetition and reliability,etc.

Inspection of Complex Internal Surface Shape with Fiber-optic Sensor II: for Specular Tilted Surface Measurement

Complex surface shape measurement has been a focus topic in the CAD/CAM field. A popular method for measuring dimensional information is using a 3D coordinate measuring machine (CMM)with a touch trigger probe. The measurement set up with CMM, however, is a time consuming task and the accuracy of the measurement deteriorates as the speed of measurement increase. Non-contact measurement is favored since high speed measurement can be achieved and problems with vibration and friction can be eliminated. Although much research has been conducted in non-contact measurement using image capturing and processing schemes, accuracy is poor and measurement is limited. Some optical technologies developed provide a good accuracy but the dynamic range and versatility is very limited. A novel fiber-optic sensor used for the inspection of complex internal contours is presented in this paper, which is able to measure a surface shape in a non-contact manner with high accuracy and high speed, and is compact and flexible to be incorporated into a CMM. Modulation functions for tilted surface shape measurement, based on the Gaussian distribution of the emitting beam from single-mode fiber (SMF), were derived for specular reflection. The feasibility of the proposed measurement principle was verified by simulations.

Permittivity Measurement of Low-Loss Substrates Based on Split Ring Resonators

In this paper, we present the complex permittivity measurement of low-loss substrates based on a microstrip-line-excited split-ring resonator (SRR). Permittivity of an unknown substrate is calculated based on the change in oscillation frequency of SRR caused by the material-under-test (MUT) above the SRR. Theoretical analysis and results of the simulations and experiments demonstrate the microstrip-line-excited SRR can be used to effectively improve measurement sensitivity. Simple equations for measurement of low-loss substrates using SRR are proposed and experimentally verified.

Clinical study using novel endoscopic system for measuring size of gastrointestinal lesion

AIM: To verify the performance of a lesion size measurement system through a clinical study.

A Contact and Non-Contact Hybrid Profilometer with Large Range

A novel hybrid instrument of contact and non-contact measurement with large range is developed, and both measurement systems are based on a Linnik interference microscope and on white-light interference measuring techniques. The ambiguity presented in conventional monochromatic interferometers is not present in the contact and non-contact measurement, and they have a virtually unlimited unambiguous range. For the contact measurement, the vertical measuring range is ±5 mm with a resolution of 1 nm and the horizontal measuring range is ±25 mm in x-range and y-range with a resolution of 1.25 μm; for the non-contact measurement, the vertical measuring range is ~5 mm with a resolution of 1 nm and the horizontal resolution better than 0.5 urn.

Non-Contact Measurements of Water Jet Spreading Width with a Laser Instrument

Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were employed in a lot of the cases.In order to avoid undesirable effects caused by the contact on the jet surface,we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width.In measurements,a transmitter emits sheet-like laser beam to a receiver.The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow.The minimum and maximum values of the shadow width are measured.In addition,pictures of the water jet are taken with a scale,and the shadow width is measured from the pictures.The experiments on various needle strokes were performed.Three kinds of width consistent with the jet structure were obtained.In the results,it can be concluded that our non-contact measuring methods are feasible.The data of jet spreading widths and jet taper were obtained and are useful for future applications.

Remote heart rate measurement using low-cost RGB face video： a technical literature review

Remote photoplethysmography （rPPG） allows remote measurement of the heart rate using low-cost RGB imaging equipment. In this study, we review the development of the field of rPPG since its emergence in 2008. We also classify existing rPPG approaches and derive a framework that provides an overview of modular steps. Based on this framework, practitioners can use our classification to design algorithms for an rPPG approach that suits their specific needs. Researchers can use the reviewed and classified algorithms as a starting point to improve particular features of an rPPG algorithm.

Geometry deviation effects of railway catenaries on pantograph– catenary interaction: a case study in Norwegian Railway System

This paper presents a non-contact measurement of the realistic catenary geometry deviation in the Norwegian railway network through a laser rangefinder.The random geometry deviation is included in the catenary model to investigate its effect on the pantograph–catenary interaction.The dispersion of the longitudinal deviation is assumed to follow a Gaussian distribution.A power spectrum density represents the vertical deviation in the contact wire.Based on the Monte Carlo method,several geometry deviation samples are generated and included in the catenary model.A lumped mass pantograph with flexible collectors is employed to reproduce the high-frequency behaviours.The stochastic analysis results indicate that the catenary geometry deviation causes a significant dispersion of the pantograph–catenary interaction response.The contact force standard deviations measured by the inspection vehicle are within the scope of the simulation results.A critical cut-off frequency that covers 1/16 of the dropper interval is suggested to fully describe the effect of the catenary geometry deviation on the contact force.The statistical minimum contact force is recommended to be modified according to the tolerant contact loss rate at high frequency.An unpleasant interaction performance of the pantograph–catenary can be expected at the catenary top speed when the random catenary geometry deviation is included.

Near-field acoustic levitation and applications to bearings:a critical review

The importance to industry of non-contact bearings is growing rapidly as the demand for highspeed and high-precision manufacturing equipment increases.As a recently developed non-contact technology,near-field acoustic levitation(NFAL)has drawn much attention for the advantages it offers,including no requirement for an external pressurized air supply,its compact structure,and its ability to adapt to its environment.In this paper,the working mechanism of NFAL is introduced in detail and compared to all existing non-contact technologies to demonstrate its versatility and potential for practical applications in industry.The fundamental theory of NFAL,including gas film lubrication theory and acoustic radiation pressure theory is presented.Then,the current stateof-the-art of the design and development of squeeze film air bearings based on NFAL is reviewed.Finally,future trends and obstacles to more widespread use are discussed.

Lorentz Force Velocimetry for Poorly Conducting Fluids-Development and Validation of a Novel Flow Rate Measurement Device

The paper demonstrated the feasibility of Lorentz Force Velocimetry for flow rate measurements of weakly conducting electrolytes using experimental results on salt water flow exposed to a permanent magnet system.This innovative flow measurement technique allows the non-contact determination of flow rates and relies on the interaction between a magnetic field and a moving conducting fluid.When an electrically conducting fluid moves through the magnetic field a Lorentz force is generated and acts on the measurement system.The present report provides an overview about the experimental setups and the first measurement results.

Rail Flatness and Verticality Measurement System Based on Ruler Model

Currently,the manual contact rail measurement that was basically adopted in China has low detection efficiency,poor accuracy and poor stability.In order to improve the function of the system,we propose a non-contact measurement method based on the flatness and verticality ruler model.The flatness measurement model was built by employing the string measurement method.In addition,the verticality measurement model was built by the dihedral method to measure the rail comprehensively.By extracting curvature information of feature points,in this system,each laser sensor is used to collect rail profile curves.A large number of three-dimensional point clouds data are generated by the unit quaternion method of coordinate transformation,and the contour curves of the characteristic points of the four laser sensors are matched with the corresponding point sets one to one,and the rail contour splicing is finally completed.The experimental results show that this method has better measurement effect compared with the traditional manual measurement method.