A study on deep structure using teleseismic receiver function in Western Yunnan

s Western Yunnan is located at the boundary of collision or underthrusting zone of Eurasian plate and is influenced by many times tectonic movements. With very complex geological environment and tectonic background, it is one of the seismically active areas. In the paper, the teleseismic records were selected from 16 national, local and mo-bile stations, including 4 very-wide-band mobile stations of PASSCAL. And nearly 2 000 receiver functions were extracted. Two measuring lines are 650 km and 450 km, respectively and across some major tectonic units in Western Yunnan. It is indicated that Nujiang might be a seam characterized by underthrusting. The western and eastern boundaries of Sichuan-Yunnan rhombus block, i.e., Honghe and Xiaojiang faults, might be an erection seam or collision belt. Panxi tectonic zone still has the characteristics of continental rift valley, that is, the surface is hollow and the upper mantle is upwarping. The tectonic situation in Western Yunnan is of certain regulation with the interlacing distribution of orogenic zone and seam. The crustal thickness decreases gradually from the north to the south and the S wave velocity is globally lower here.

S-wave velocity structure beneath Changbaishan volcano inferred from receiver function

The S wave velocity structure in Changbaishan volcanic region was obtained from teleseismic receiver function modeling. The results show that there exist distinct low velocity layers in crust in volcano area. Beneath WQD station near to the Tianchi caldera the low velocity layer at 8 km depth is 20 km thick with the lowest S-wave velocity about 2.2 km/s At EDO station located 50 km north of Tianchi caldera, no obvious crustal low velocity layer is detected. In the volcanic region, the thickness of crustal low velocity layer is greater and the lowest velocity is more obvious with the distance shorter to the caldera. It indicates the existence of the high temperature material or magma reservoir in crust near the Tianchi caldera. The receiver functions and inversion result from different back azimuths at CBS permanent seismic station show that the thickness of near surface low velocity layer and Moho depth change with directions. The near surface low velocity layer is obviously thicker in south direction. The Moho depth shows slight uplifting in the direction of the caldera located. We con- sider that the special near surface velocity structure is the main cause of relatively lower prominent frequency of volcanic earthquake waveforms recorded by CBS station. The slight uplifting of Moho beneath Tianchi caldera indicates there is a material exchanging channel between upper mantle and magma reservoir in crust.

Efficient structures for wideband digital receiver

Digital receivers have become more and more popular in radar, communication, and electric warfare for the advantages compared with their analog counterparts. But conventional digital receivers have been generally considered impractical for bandwidth greater than several hundreds MHz. To extend receiver bandwidth, decrease data rate and save hardware resources, three novel structures are proposed. They decimate the data stream prior to mixing and filtering, then process the multiple decimated streams in parallel at a lower rate. Consequently it is feasible to realize wideband receivers on the current ASIC devices. A design example and corresponding simulation results are demonstrated to evaluate the proposed structures.

A study on deep structure using teleseismic receiver function in Western Yunnan

s Western Yunnan is located at the boundary of collision or underthrusting zone of Eurasian plate and is influenced by many times tectonic movements. With very complex geological environment and tectonic background, it is one of the seismically active areas. In the paper, the teleseismic records were selected from 16 national, local and mo-bile stations, including 4 very-wide-band mobile stations of PASSCAL. And nearly 2 000 receiver functions were extracted. Two measuring lines are 650 km and 450 km, respectively and across some major tectonic units in Western Yunnan. It is indicated that Nujiang might be a seam characterized by underthrusting. The western and eastern boundaries of Sichuan-Yunnan rhombus block, i.e., Honghe and Xiaojiang faults, might be an erection seam or collision belt. Panxi tectonic zone still has the characteristics of continental rift valley, that is, the surface is hollow and the upper mantle is upwarping. The tectonic situation in Western Yunnan is of certain regulation with the interlacing distribution of orogenic zone and seam. The crustal thickness decreases gradually from the north to the south and the S wave velocity is globally lower here.

The Lithosphere Structure and its Implication for Different Metallogenic Belts beneath the Eastern South China Block

The South China Block(SCB)was formed through the Neoproterozoic amalgamation of the Yangtze Block(YB),the Cathaysia Block(CB),and the accreted components of the Jiangnan orogenic belt(JNO),it is bounded by the Jiangshan–Shaoxing–Pingxiang fault(JSPF)and the Jiujiang–Shitai–Jishou fault(JSJF)(Yao et al.,2019).The SCB has undergone a series of complex geological events,including Paleozoic orogeny,Mesozoic collisions with the North China Craton(NCC)and the Indochina Block,as well as the intracontinental orogeny,leading to extensive lithospheric modifications and magmatic activities(Zhang H J et al.,2023;Fig.1).

Mapping crustal S-wave velocity structure with SV-component receiver function method

In this article, we analyze the characters of SV-component receiver function of teleseismic body waves and its advantages in mapping the S-wave velocity structure of crust in detail. Similar to radial receiver function, SV-component receiver function can be obtained by directly deconvolving the P-component from the SV-component of teleseismic recordings. Our analyses indicate that the change of amplitude of SV-component receiver function against the change of epicentral distance is less than that of radial receiver function. Moreover, the waveform of SV-component receiver function is simpler than the radial receiver function and gives prominence to the PS converted phases that are the most sensitive to the shear wave velocity structure in the inversion. The synthetic tests show that the convergence of SV-component receiver function inversion is faster than that of the radial receiver function inversion. As an example, we investigate the S-wave velocity structure beneath HIA sta-tion by using the SV-component receiver function inversion method.

S-wave velocity structure inferred from receiver function inversion in Tengchong volcanic area

Tengchong volcanic area is located near the impinging and underthrust margin of India and Eurasia plates. The volcanic activity is closely related to the tectonic environment. The deep structure characteristics are inferred from the receiver function inversion with the teleseismic records in the paper. The results show that the low velocity zone is influenced by the NE-trending Dayingjiang fault. The S-wave low velocity structure occurs obviously in the southern part of the fault, but unobviously in its northern part. There are low velocity zones in the shallow po-sition, which coincides with the seismicity. It also demonstrates that the low velocity zone is directly related to the thermal activity in the volcanic area. Therefore, we consider that the volcano may be alive again.

Receiver functions of CCDSN and crustal structure of Chinese mainland

The teleseismic receiver functions of 48 stations belonging to the CCDSN are used to invert the crustal structure beneath each station with the neighborhood algorithm. Thin layers with low velocity have been found beneath eight stations with ＂abnormal＂ observed receiver functions. Unreasonable results of few stations have been adjusted lightly with the trial-and-error method. The final result indicates that the crust in the western China is relatively thicker than the eastern China. The crust thickness beneath the Tibetan plateau is very large, which reaches 84 km at the station LSA. Double-crust structure exists below the stations LSA and CAD in Tibet, which might imply the collision between the Indian and Eurasian plates. A pronounced low velocity zone in the lower crust beneath the station TNC of Yunnan province might relate to the high temperature or emergence of partially molten material caused by Quaternary volcano, magma and geothermal activities in this area. The Moho is a transitional zone made up of thin layers instead of simple sharp discontinuity beneath several stations. The Conrad discontinuity is clearly identified beneath 20 stations mainly in the southeastern China, whereas it is blurry beneath 14 stations and uncertain beneath remaining stations.

Crustal structure along the Zhenkang-Luxi deep seismic sounding profile in Yunnan derived from receiver functions

The crustal thicknesses and the Poisson’s ratios under the seismic stations can be calculated by receiver function method with H-κ stacking effectively. But the stacking results are affected to some extent by the average crustal P-wave velocity. To eliminate this effect and get more accurate crustal structure along the Zhenkang-Luxi deep seismic sounding profile which lies in Yunnan Province, we calculate the receiver functions from the teleseismic events recorded by 11 temporary stations as well as 5 permanent ones along the profile and carry out the stacking with Vp obtained from the profile in this study. Our study shows that the crustal thicknesses along the Zhenkang-Luxi profile range from 34.8 km to 41.8 km with an average of 39 km. The crust is thicker in the middle part of the profile and thinner in both sides in general. Dramatic changes of crustal thickness about 3 km are detected across both the Lancangjiang fault and the Xiaojiang fault, which implies that these faults cut through the Moho. The lowest Poisson’s ratio under the stations is 0.22 and the highest is 0.27 with the mean of 0.25, which is lower than the global average value 0.27 in the continental crust. It suggests that most of the crust along the profile lacks mafic component, but contains more felsic substance. The low Poisson’s ratio also indicates that there is no satisfying condition for partial melting. We deduce that the material flow in the middle-lower crust in the southeastern margin of the Tibetan plateau may occur only in the north region of 24°N.

The velocity structure of crust and upper mantle in the Wudalianchi volcano area inferred from the receiver function

The Wudalianchi volcano is a modern volcano erupted since the Holocene. Its frequent occurrence of the small earthquake is considered to be indicator of active dormancy volcano. The S wave velocity structure is inferred from the receiver function for the crust and upper mantle of the Wudalianchi volcano area. The results show that the low velocity structure of S wave is widely distributed underneath the volcano area and part of the low-velocity-zone located at shallow depth in the Wudalianchi volcano area. The low velocity structure is related to the seismicity. The Moho interface is not clear underneath the volcano area, which may be regard to be an nec-essary condition for the lava upwelling. Therefore, we infer that the Wudalianchi volcano has the deep structural condition for the volcano activity and may be alive again.

Crustal structure using receiver function in the east part of A’nyêmaqên suture belt

Twenty broadband seismographs were deployed along Hongyuan, Sichuan to Wuwei, Gansu. 81 teleseismic events were recorded in one year. We computed receiver functions from teleseismic waveform data and obtained S wave velocity structure beneath each station along the profile by using receiver function inversion method. The results revealed that the crustal structure is very complex and crustal average S wave velocity is to be on the low side. Low velocity structure generally exists in the depth range of 10～40 km in the crust between Aba arc fault and northern edge fault of Qinling earth＇s axis and it is a tectonic feature of complex geological process such as ancient A＇nyemaqen Tethys ocean from closing and side colliding to subducted plate exhumed or thrust rock slice lifted. The Moho is about 50 km depth along the profile and is slightly deeper in the south than in the north.

The Lithospheric Structure in the South China Block from Receiver Function: Implications for the Source of Mineral System

The South China block(SC),composed of Cathaysia(CA),Jiangnan Orogenic belt(JNB),and Yangtze block(YB),is one of the most important poly-metallic metallogenic provinces in the world(Zhang et al.,2013),containing of four famous major Mesozoic metallogenic belts,involving the Middle-Lower Yangtze Fe-Cu-Au metallogenic belt(MYMB).

A Receiver Structure for Frequency-Flat Time-Varying Rayleigh Channels and Performance Analysis

This paper proposes a wavelet based receiver structure for frequency-flat time-varying Rayleigh channels, consisting of a receiver front-end followed by a Maximum A-Posteriori (MAP) detector. Discretization of the received continuous time signal using filter banks is an essential stage in the front-end part, where the Fast Haar Transform (FHT) is used to reduce complexity. Analysis of our receiver over slow-fading channels shows that it is optimal for certain modulation schemes. By comparison with literature, it is shown that over such channels our receiver can achieve optimal performance for Time-Orthogonal modulation. Computed and Monte-Carlo simulated performance results over fast time-varying Rayleigh fading channels show that with Minimum Shift Keying (MSK), our receiver using four basis functions (filters) lowers the error floor by more than one order of magnitude with respect to other techniques of comparable complexity. Orthogonal Frequency Shift Keying (FSK) can achieve the same performance as Time-Orthogonal modulation for the slow-fading case, but suffers some degradation over fast-fading channels where it exhibits an error floor. Compared to MSK, however, Orthogonal FSK provides better performance.

S-wave velocity structure in the SE Tibetan plateau

We use observations recorded by 23 permanent and 99 temporary stations in the SE Tibetan plateau to obtain the S-wave velocity structure along two profiles by applying joint inversion with receiver functions and surface waves. The two profiles cross West Yunnan block （WYB）, the Central Yunnan sub-block （CYB）, South China block （SCB）, and Nanpanjiang basin （NPB）. The profile at -25°N shows that the Moho interface in the CYB is deeper than those in the WYB and the NPB, and the topography and Moho depth have clear correspondence. Beneath the Xiaojiang fault zone （XJF）, there exists a crustal low-velocity zone （LYZ）, crossing the XJF and expanding eastward into the SCB. The NPB is shown to be of relatively high velocity. We speculate that the eastward extrusion of the Tibetan plateau may pass through the XJF and affect its eastern region, and is resisted by the rigid NPB, which has high velocity. This may be the main cause of the crustal thickening and uplift of the topography. In the Tengchong volcanic area, the crust is shown to have alternate high- and low-velocity layers, and the upper mantle is shown to be of low velocity. We consider that the magma which exists in the crust is from the upper mantle and that the complex crustal velocity structure is related to magmatic differentiation. Between the Tengchong volcanic area and the XJF, the crustal velocity is relatively high. Combining these observations with other geophysical evi- dence, it is indicated that rock strength is high and defor- mation is weak in this area, which is why the level of seismicity is quite low. The profile at ~ 23~N shows that the variation of the Moho depth is small from the eastern rigid block to the western active block with a wide range of LVZs. We consider that deformation to the south of the SE Tibetan Plateau is weak.

Crustal structure of the central Tibetan plateau and geological interpretation

Based on teleseismic data obtained from 225 stations from two networks in the central Tibetan plateau, we have generated detailed crustal structure images using P-wave receiver function techniques with more accurate piercing-depth-correction and time-depth-correction than what have previously been available. Our images indicate an undulatory Moho beneath the Tibetan plateau with a steep jump beneath the northern Himalaya, and obviously different structures in proximity to the Bangong-Nujiang suture. In several sections of the Tibetan plateau, the lower crust is characterized by pervasive high-velocity regions, which are consistent with the preservation of eclogite bodies beneath the plateau, whose presence affects the dynamics of the Tibetan plateau.

Experimental and numerical studies on the receiving gain enhancement modulated by a sub-wavelength plasma layer

A novel technique based on sub-wavelength plasma structure effects on enhancement of RF communication signals on a receiving antenna is carried out in this paper in laboratory experiments and analyzed by corresponding numerical simulations.Considerable intensification on receiving signal gain up to -10 d B in comparison with that without the plasma modulation is observed experimentally in -1 GHz RF band,with an effective enhancement bandwidth of -340 MHz and the fractional bandwidth of -34%.Then,the optimal modulation parameters of plasma are further studied by a numerical simulation.It is shown that the number density,the layer thickness,and the collision frequency of the plasma,as well as the relative distance between the plasma layer and antenna synergistically affect the modulation.Compared to the metallic antenna with the same overall dimension,the modulated antenna covered by the subwavelength plasma structure features higher receiving efficiency and lower radar cross section in the studied RF band.The mechanism of the reception enhancement is further revealed by analyzing characteristics of electromagnetic scattering and electric field distribution in the subwavelength plasma layer.The results then exhibit scientific significance and application potential of sub-wavelength plasma modulation on compact receiving antennas with higher performance and better feature of radar stealth.

A sign-function receiving scheme for sine signals enhanced by stochastic resonance

To address the problem that it is difficult to detect an intermediate frequency(IF)signal at the receiving end of a communication system under extremely low signal-to-noise ratio(SNR)conditions,we propose a stochastic resonance(SR)-enhanced sine-signal detection method based on the sign function.By analyzing the SR mechanism of the sine signal and combining it with the characteristics of a dual-sequence frequency-hopping(DSFH)receiver,a periodic stationary solution of the Fokker-Planck equation(FPE)with a time parameter is obtained.The extreme point of the sine signal is selected as the decision time,and the force law of the electromagnetic particles is analyzed.A receiving structure based on the sign function is proposed to maximize the output difference of the system,and the value condition of the sign function is determined.In order to further improve the detection performance,in combination with the central-limit theorem,the sampling points are averaged N times,and the signal-detection problem is transformed into a hypothesis-testing problem under a Gaussian distribution.The theoretical analysis and simulation experiment results confirm that when N is 100 and the SNR is greater than 20 dB,the bit-error ratio(BER)is less than 1.5×10^(-2) under conditions in which the signal conforms to the optimal SR parameters.

短周期密集台阵深部地壳结构探测研究进展

由于穿透能力强,天然地震接收函数成为壳幔结构探测中最为广泛使用的方法.随着人们对地球内部结构和动力学过程认识程度的提高,台间距相对较大的宽频带台阵已无法满足壳幔结构高分辨率探测的需求.短周期密集台阵采用频率较高的便携式数字地震仪,通过百米级台间距的密集观测,可在短时间内(1~2个月)获得大量地震数据.其优势主要表现在三个方面:(1)地壳内射线交叉覆盖好,有利于提高分辨率;(2)射线密集分布,通过相干叠加压制噪声,可实现高频接收函数的成像;(3)观测时间短,效率高.因此,短短几年内,短周期密集台阵已经成为地壳深部结构探测的常规手段之一.本文主要介绍短周期密集台阵深部地壳结构探测的由来,以及通过几个典型的探测实例,展示探测效果及其在不同构造域的应用.

A two-step multi-frequency receiver function inversion method for shallow crustal S-wave velocity structure and its application across the basin-mountain range belts in Northeast China

A shallow crustal velocity structure(above 10 km depth) is essential for understanding the crustal structures and deformation and assessing the exploration prospect of natural resources, and also provides priori information for imaging deeper crustal and mantle structure. Passive-source seismic methods are cost-effective and advantageous for regional-scale imaging of shallow crustal structures compared to active-source methods. Among these passive methods, techniques utilizing receiver function waveforms and/or body-wave amplitude ratios have recently gained prominence due to their relatively high spatial resolution. However, in basin regions, reverberations caused by near-surface unconsolidated sedimentary layers often introduce strong non-uniqueness and uncertainty, limiting the applicability of such methods. To address these challenges, we propose a two-step inversion method that uses multi-frequency P-RF waveforms and P-RF horizontal-to-vertical amplitude ratios. Synthetic tests indicate that our two-step inversion method can mitigate the non-uniqueness of the inversion and enhance the stability of the results. Applying this method to teleseismic data from a linear seismic array across the sedimentary basins in Northeast China, we obtain a high-resolution image of the shallow crustal S-wave velocity structure along the array. Our results reveal significant differences between the basins and mountains. The identification of low-velocity anomalies(<2.8 km s^(-1)) at depths less than 1.0 km beneath the Erlian Basin and less than 2.5 km beneath the Songliao Basin suggests the existence of sedimentary layers. Moreover, the high-velocity anomalies(~3.4–3.8 km s^(-1)) occurring at depths greater than 7 km in the Songliao Basin may reflect mafic intrusions emplaced during the Early Cretaceous. Velocity anomaly distribution in our imaging result is consistent with the location of the major faults, uplifts, and sedimentary depressions, as well as active-source seismic results. This application further validates the effectiveness of our method in constraining the depth-dependent characteristics of the S-wave velocity in basins with unconsolidated sedimentary cover.