Oxygen tension modulates cell function in an in vitro three-dimensional glioblastoma tumor model

Hypoxia is a typical feature of the tumor microenvironment,one of the most critical factors affecting cell behavior and tumor progression.However,the lack of tumor models able to precisely emulate natural brain tumor tissue has impeded the study of the effects of hypoxia on the progression and growth of tumor cells.This study reports a three-dimensional(3D)brain tumor model obtained by encapsulating U87MG(U87)cells in a hydrogel containing type I collagen.It also documents the effect of various oxygen concentrations(1%,7%,and 21%)in the culture environment on U87 cell morphology,proliferation,viability,cell cycle,apoptosis rate,and migration.Finally,it compares two-dimensional(2D)and 3D cultures.For comparison purposes,cells cultured in flat culture dishes were used as the control(2D model).Cells cultured in the 3D model proliferated more slowly but had a higher apoptosis rate and proportion of cells in the resting phase(G0 phase)/gap I phase(G1 phase)than those cultured in the 2D model.Besides,the two models yielded significantly different cell morphologies.Finally,hypoxia(e.g.,1%O2)affected cell morphology,slowed cell growth,reduced cell viability,and increased the apoptosis rate in the 3D model.These results indicate that the constructed 3D model is effective for investigating the effects of biological and chemical factors on cell morphology and function,and can be more representative of the tumor microenvironment than 2D culture systems.The developed 3D glioblastoma tumor model is equally applicable to other studies in pharmacology and pathology.

Drivers for Inter-city Innovation Networks Across Chinese Cities:Modelling Physical Versus Intangible Effects

Cross-region innovation is widely recognized as an important source of the long-term regional innovation capacity.In the recent past,a growing number of studies has investigated the network structure and mechanisms of cross-region innovation collaboration in various contexts.However,existing research mainly focuses on physical effects,such as geographical distance and high-speed railway connections.These studies ignore the intangible drivers in a changing environment,the more digitalized economy and the increasingly solidified innovation network structure.Thus,the focus of this study is on estimating determinants of innovation networks,especially on intangible drivers,which have been largely neglected so far.Using city-level data of Chinese patents(excluding Hong Kong,Macao,and Taiwan Province of China),we trace innovation networks across Chinese cities over a long period of time.By integrating a measure on Information and Communications Technology(ICT)development gap and network structural effects into the general proximity framework,this paper explores the changing mechanisms of Chinese innovation networks from a new perspective.The results show that the structure of cross-region innovation networks has changed in China.As mechanisms behind this development,the results confirm the increasingly important role of intangible drivers in Chinese inter-city innovation collaboration when controlling for effects of physical proximity,such as geographical distance.Since digitalization and coordinated development are the mainstream trends in China and other developing countries,these countries'inter-city innovation collaboration patterns will witness dramatic changes under the influence of intangible drivers.

Three-dimensional structural models,evolution and petroleum geological significances of transtensional faults in the Ziyang area,central Sichuan Basin,SW China

With drilling and seismic data of Transtensional(strike-slip)Fault System in the Ziyang area of the central Sichuan Basin,SW China plane-section integrated structural interpretation,3-D fault framework model building,fault throw analyzing,and balanced profile restoration,it is pointed out that the transtensional fault system in the Ziyang 3-D seismic survey consists of the northeast-trending F_(I)19 and F_(I)20 fault zones dominated by extensional deformation,as well as 3 sets of northwest-trending en echelon normal faults experienced dextral shear deformation.Among them,the F_(I)19 and F_(I)20 fault zones cut through the Neoproterozoic to Lower Triassic Jialingjiang Formation,presenting a 3-D structure of an“S”-shaped ribbon.And before Permian and during the Early Triassic,the F_(I)19 and F_(I)20 fault zones underwent at least two periods of structural superimposition.Besides,the 3 sets of northwest-trending en echelon normal faults are composed of small normal faults arranged in pairs,with opposite dip directions and partially left-stepped arrangement.And before Permian,they had formed almost,restricting the eastward growth and propagation of the F_(I)19 fault zone.The F_(I)19 and F_(I)20 fault zones communicate multiple sets of source rocks and reservoirs from deep to shallow,and the timing of fault activity matches well with oil and gas generation peaks.If there were favorable Cambrian-Triassic sedimentary facies and reservoirs developing on the local anticlinal belts of both sides of the F_(I)19 and F_(I)20 fault zones,the major reservoirs in this area are expected to achieve breakthroughs in oil and gas exploration.

Innovation and Development Trends in ASEAN Marketing Models in the Digital Age

The digital wave is reshaping the global economic landscape with unprecedented force,especially in the dynamic and promising ASEAN region.Southeast Asia,a multicultural gathering place composed of ten countries,is experiencing profound changes due to the digital revolution,and its marketing model is also displaying new vitality.With soaring internet penetration,widespread use of smartphones,and the booming rise of social media,ASEAN markets have become at the forefront of global digital marketing innovation.This transformation is not only about the application of technology but also involves a comprehensive shift in thinking,consumer behavior,and business strategy.The purpose of this paper is to explore in depth how ASEAN marketing models are innovating in this era and to identify future trends,with a view to providing insights for companies to help them remain competitive in the rapidly changing market.

Moderating effect of corporate financialization on the impact of climate policy on corporate green innovation:Evidence from China

With intensifying global climate change,humanity is confronted with unparalleled environmental challenges and risks.This study employs the staggered difference-in-difference model to examine the relationship between climate policy and green innovation in the corporate financialization context.Using Chinese-listed company data from 2008 to 2020,our analysis reveals a favorable correlation between China’s carbon emission trading policy(CCTP)and advancements in green innovation.Furthermore,we find that the level of corporate financialization moderates this correlation,diminishing the driving effect of CCTP on green innovation.Additionally,results of heterogeneity analysis show that this moderating consequence is more evident in non-state owned and low-digitization enterprises compared with state-owned and high-digitization ones.Our findings contribute to the existing literature by clarifying the interaction between CCTP,green innovation,and corporate financialization.Our research provides valuable insights for policymakers and stakeholders seeking to strengthen climate policies and encourages green innovation in different types of businesses.

Effects of three-dimensional quality assessment nursing intervention on efficacy and disease management of patients undergoing esophageal cancer surgery

BACKGROUND Esophageal cancer is one of the most common malignant tumors.The three-dimensional quality structure model is a quality assessment theory that includes three dimensions:Structure,process,and results.AIM To investigate the effects of nursing interventions with three-dimensional quality assessment on the efficacy and disease management ability of patients undergoing esophageal cancer surgery.METHODS In this prospective study,the control group received routine nursing,and the intervention group additionally received a three-dimensional quality assessment intervention based on the above routine care.Self-efficacy and patient disease management abilities were evaluated using the General Self-Efficacy Scale(GSES)and Exercise of Self-Care Agency scale,respectively.IBM SPSS Statistics for Windows,version 17.0,was used for the data processing.RESULTS This study recruited 112 patients who were assigned to the control and experi-mental groups(n=56 per group).Before the intervention,there was no significant difference in GSES scores between the two groups(P>0.05).After the inter-vention,the GSES scores of both groups increased,with the experimental group showing higher values(P<0.05).At the time of discharge and three months after discharge,the scores for positive attitudes,self-stress reduction,and total score of health promotion in the experimental group were higher than those in the control group(P<0.05).CONCLUSION The implementation of a three-dimensional quality structure model for postoperative patients with esophageal cancer can effectively improve their self-management ability and self-efficacy of postoperative patients.

Are cities greener because of innovation?Independent innovation policy and green economic efficiency

The national independent innovation demonstration zone(NIIDZ)is an independent innovation policy that plays a crucial role in implementing strategies.Given the importance of the NIIDZ,this study uses panel data of 278 prefecture-level cities in China from 2006 to 2020 and empirically examines the effect and internal mechanism of the NIIDZ on green economic efficiency(GEE)using the difference-in-difference model(DID).The results show that the NIIDZ effectively enhances the growth of GEE,and the results remain valid through several robustness tests,such as year-by-year propensity score matching.The transmission mechanism suggests that the NIIDZ indirectly drives GEE by accelerating scientific and technological investment,promoting talent concentration,and optimizing the industrial structure.Moreover,heterogeneity analysis reveals that the promotion effect of the NIIDZ on GEE is more prominent in the eastern region and high green development level areas.The study’s findings can serve as a reference for China to further utilize the policy effectiveness of the NIIDZ and accelerate the high-quality development of the green economy in the future.

How R&D investment promotes green technology innovation in the context of digitalization?-An empirical analysis based on provincial panel data

Green technology innovation is an important driving force and source to promote my country’s high-quality development,and it is the core path to achieve sustainable development.This paper uses my country’s provincial panel data from 2016 to 2019 to study the impact mechanism of R&D investment on green technology innovation,and introduces the level of digitization,using the panel threshold model to discuss its role in the impact mechanism of R&D investment on green technology innovation.The study found that when the level of digitalization in a region is low,increasing R&D investment does not necessarily improve the ability of green technology innovation;when the level of digitalization is relatively high,R&D investment has a positive role in promoting green technology innovation.Therefore,it is necessary to improve policies to encourage enterprises to increase investment in research and development;at the same time,it is necessary to promote the coordinated development of digital foundation,digital investment,digital literacy,digital economy and digital application,and promote the deep integration of digitalization and green technology innovation.

Innovative Practice of Intelligent Business Models in the Field of Communication

As a service format to meet spiritual needs, fashion culture industry is often synchronized in its creation, production, dissemination, display and consumption. In order to explore how artificial intelligence provides technical means, platforms, channels and space for intelligent formats in the field of communication, and how to provide intelligent services for cultural creation, communication, display and consumption. This paper discusses the application and innovation of artificial intelligence in all aspects of communication field, analyzes the problems and puts forward corresponding countermeasures and suggestions.

Research on Three-Dimensional Simulation of the Internal Arc Gear Skiving

Aiming at the problems that the simulation accuracy which is reduced due to the simplification of the model,a three-dimensional simulation method based on solid modeling is being proposed.By analyzing the motion relationship and positional relationship between the caries knife and the workpiece,the coordinate system of the caries machining was established.With the MATLAB software,the cutting edge model and the blade sweeping surface model of the boring cutter are sequentially established.Boolean operation is performed on the blade swept surface formed by the tooth cutter teeth with time t and the workpiece tooth geometry as well as the undeformed three-dimensional chip geometry model and the instantaneous cogging geometry model are obtained at different times.Through the compare between gear end face simulation tooth profile and the theoretical inner arc tooth profile,we verified the accuracy and rationality of the proposed method.

Study of the geomagnetic field's regional gradients in Chinese continent using three-dimensional surface Spline model

We combined domestic ground-based and satellite magnetic measurements to create a regional three-dimensional surface Spline(3DSS)gradient model of the main geomagnetic field over the Chinese continent.To improve the precision of the model,we considered the data gap between the ground and satellite data.We compared and analyzed the results of the Taylor polynomial,surface Spline,and CHAOS-6(the CHAMP,?rsted and SAC-C model of Earth’s magnetic field)gradient models.Results showed that the gradients in the south-north and east-west directions of the four models were consistent.The 3DSS model was able to express not only gradients at different altitudes,but also average gradients inside the research area.The two Spline models were able to capture more information on gradient anomalies than were the fitted models.Strong local anomalies were observed in northern Xinjiang,Beijing,and the junction area between Jiangsu and Zhejiang,and the total intensity F decreased whereas the altitude increased.The gradient decreased by 21.69%in the south-north direction and increased by 11.78%in the east-west direction.In addition,the altitude gradient turned from negative to positive while the altitude increased.The Spline model and the two fitted models differed mainly in the field sources they expressed and the modeling theory.

Can preoperative planning using IRIS™three-dimensional anatomical virtual models predict operative findings during robot-assisted partial nephrectomy?

Objective To evaluate the predictive validity of IRIS™(Intuitive Surgical®,Sunnyvale,CA,USA)as a planning tool for robot-assisted partial nephrectomy(RAPN)by assessing the degree of overlap with intraoperative execution.Methods Thirty-one patients scheduled for RAPN by four experienced urologists were enrolled in a prospective study.Prior to surgery,urologists reviewed the IRIS™three-dimensional model on an iphone Operating System(iOS)app and completed a questionnaire outlining their surgical plan including surgical approach,and ischemia technique as well as confidence in executing this plan.Postoperatively,questionnaires assessing the procedural approach,clinical utility,efficiency,and effectiveness of IRIS™were completed.The degree of overlap between the preoperative and intraoperative questionnaires and between the planned approach and actual execution of the procedure was analyzed.Questionnaires were answered on a 5-point Likert scale and scores of 4 or greater were considered positive.Results Mean age was 65.1 years with a mean tumor size of 27.7 mm(interquartile range 17.5-44.0 mm).Hilar tumors consisted of 32.3%;48.4%of patients had R.E.N.A.L.nephrometry scores of 7-9.On preoperative questionnaires,the surgeons reported that in 67.7%cases they were confident that they can perform the procedure successfully,and on intraoperative questionnaires,the surgeons reported that in 96.8%cases IRIS™helped achieve good spatial sensation of the anatomy.There was a high degree of overlap between preoperative and intraoperative questionnaires for the surgical approach,interpreting anatomical details and clinical utility.When comparing plans for selective or off-clamp,the preoperative plan was executed in 90.0%of cases intraoperatively.Conclusion A high degree of overlap between the preoperative surgical approach and intraoperative RAPN execution was found using IRIS™.This is the first study to evaluate the predictive accuracy of IRIS™during RAPN by comparing preoperative plan and intraoperative execution.

Three-Dimensional Analytical Modeling of Axial-Flux Permanent Magnet Drivers

In this paper, the axial-flux permanent magnet driver is modeledand analyzed in a simple and novel way under three-dimensional cylindricalcoordinates. The inherent three-dimensional characteristics of the deviceare comprehensively considered, and the governing equations are solved bysimplifying the boundary conditions. The axial magnetization of the sectorshapedpermanent magnets is accurately described in an algebraic form bythe parameters, which makes the physical meaning more explicit than thepurely mathematical expression in general series forms. The parameters of theBessel function are determined simply and the magnetic field distribution ofpermanent magnets and the air-gap is solved. Furthermore, the field solutionsare completely analytical, which provides convenience and satisfactoryaccuracy for modeling a series of electromagnetic performance parameters,such as the axial electromagnetic force density, axial electromagnetic force,and electromagnetic torque. The correctness and accuracy of the analyticalmodels are fully verified by three-dimensional finite element simulations and a15 kW prototype and the results of calculations, simulations, and experimentsunder three methods are highly consistent. The influence of several designparameters on magnetic field distribution and performance is studied and discussed.The results indicate that the modeling method proposed in this papercan calculate the magnetic field distribution and performance accurately andrapidly, which affords an important reference for the design and optimizationof axial-flux permanent magnet drivers.

“Flipped Classroom” Teaching Model Research: A Case Study of “Innovation and Entrepreneurship Education and Practice (Theory)”

The flipped classroom model differs significantly from the traditional classroom teaching model and offers numerous advantages. This article draws inspiration from the flipped classroom concept, using the “Innovation and Entrepreneurship Education and Practice (Theory)” course as an example to introduce the innovation and characteristics of the flipped classroom model: it is problem-oriented, addressing the “pain points” in teaching, motivating students towards “active learning,” and integrating diverse teaching methods. In the conclusion, the article proposed suggestions on the application of this model, encouraging teachers to summarize their teaching experiences, enhance their knowledge base, and foster students’ awareness of innovation and entrepreneurship.

Barriers and Drivers of Sustainable Business Model Innovation:Present and Future Research Perspectiv

Sustainable business model innovation(SBMI)introduced a unique frontier in current business operations and innovation management.Despite the numerous advantages of SBMI to contemporary business strategy,most established firms face challenges in its successful implementation.Through a systematic review process(SRP),the paper attempted to critically evaluate and analyze the previous outcome on the barriers and drivers to SBMI.The research explored 42 prior studies to identify the thematic study areas,highlight the research gaps,and outline future propositions and agendas.The research thoroughly evaluates the state-of-the-art regarding barriers and drivers to implement SBMI.The SRP approach utilized in the study sheds light on the intricacies of SBMI by highlighting six critical barriers:institutional,organizational,strategic,resource allocation,technological,and financial barriers that hinder the successful deployment of SBMI.In addition,the study’s findings indicated that organizational learning,knowledge management,dynamic capabilities resource mobilization,innovative business activities,and human resource development could be a catalyst to the successful implementation of SBMI.Furthermore,the study highlighted some critical gaps and agendas for future research on SBMI.This study contributes to the literature on business model innovation and offers a practical outlook that can facilitate firms and policymakers in developing strategies to improve their business model.

Evolution of Growth Model and Cultivation of Competitive Advantages Under the Ambidextrous Innovation Strategy: In the Case of China’s High-Tech Enterprises

This study focuses on the evolution of growth model and cultivation of competitive advantages under the ambidextrous innovation strategy.After a brief introduction of the connotation of ambidextrous innovation strategy,the evolution of growth model of high-tech enterprises under the conventional strategy and the ambidextrous innovation strategy is analyzed.Furthermore,a discussion is made on how to cultivate enterprises’competitive advantages under the ambidextrous innovation strategy,thereby enabling enterprises to stand out from competitors under this new strategic model and truly achieve the goal of sustainable development.

Research and Application of Multi-Dimensional and Three-Dimensional Teaching in Geriatric Nursing Teaching in the Context of Mass Entrepreneurship and Innovation

Purpose:Study the specific application effect of multi-dimensional and three-dimensional teaching in Geriatric Nursing teaching in the context of mass entrepreneurship and innovation.Methods:Respectively select 80 nursing undergraduates of 2015 and 80 nursing undergraduates of 2014 in our school as the research object of the experimental group and the control group.In terms of Geriatric Nursing teaching,nursing students in the control group adopt traditional classroom teaching methods to carry out,while students in the experimental group adopt multi-dimensional and three-dimensional teaching in the context of mass entrepreneurship and innovation.Then observe and compare the geriatric nursing knowledge scoring as well as theory and practice assessment results in the two groups taught with different methods.Results:It's obvious that the scoring of nursing students in the experimental group is higher than those in the control group in respect of geriatric nursing knowledge,and statistical significance exists in the between-group differences(P<0.05).The nursing students in the experimental group perform obviously better than those in the control group in terms of the results of theory,practice and comprehensive assessment as well as total score,and statistical significance exists in the between-group differences(P<0.05).Conclusion:Implementing Geriatric Nursing teaching for higher education nursing undergraduates with multi-dimensional and three-dimensional teaching in the context of mass entrepreneurship and innovation can remarkably improve nursing students'cognitive level in geriatric nursing as well as their mastery degree of theoretical,practical and comprehensive knowledge.Thus,the multi-dimensional and three-dimensional teaching mode in the context of mass entrepreneurship and innovation makes 80 nursing undergraduates of 2015 in our school direct beneficiaries,which could be popularized and applied in medical colleges.

Shear behavior of intact granite under thermo-mechanical coupling and three-dimensional morphology of shear-formed fractures

The shear failure of intact rock under thermo-mechanical(TM)coupling conditions is common,such as in enhanced geothermal mining and deep mine construction.Under the effect of a continuous engineering disturbance,shear-formed fractures are prone to secondary instability,posing a severe threat to deep engineering.Although numerous studies regarding three-dimensional(3D)morphologies of fracture surfaces have been conducted,the understanding of shear-formed fractures under TM coupling conditions is limited.In this study,direct shear tests of intact granite under various TM coupling conditions were conducted,followed by 3D laser scanning tests of shear-formed fractures.Test results demonstrated that the peak shear strength of intact granite is positively correlated with the normal stress,whereas it is negatively correlated with the temperature.The internal friction angle and cohesion of intact granite significantly decrease with an increase in the temperature.The anisotropy,roughness value,and height of the asperities on the fracture surfaces are reduced as the normal stress increases,whereas their variation trends are the opposite as the temperature increases.The macroscopic failure mode of intact granite under TM coupling conditions is dominated by mixed tensileeshear and shear failures.As the normal stress increases,intragranular fractures are developed ranging from a local to a global distribution,and the macroscopic failure mode of intact granite changes from mixed tensileeshear to shear failure.Finally,3D morphological characteristics of the asperities on the shear-formed fracture surfaces were analyzed,and a quadrangular pyramid conceptual model representing these asperities was proposed and sufficiently verified.

DEVELOPMENT OF A HYBRID MODEL FOR THREE-DIMENSIONAL GIS

This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulated Irregular Network (TIN) and octree models are integrated in this hybrid models. The TIN model works as a surface-based model which mainly serves for surface presentation and visualization. On the other hand, the octree encoding supports volumetric analysis. The designed data structure brings a major advantage in the three-dimensional selective retrieval. This technique increases the efficiency of three-dimensional data operation.

A three-dimensional semi-implicit unstructured grid finite volume ocean model

A new three-dimensional semi-implicit finite-volume ocean model has been developed for simulating the coastal ocean circulation, which is based on the staggered C-unstructured non-orthogonal grid in the hor- izontal direction and z-level grid in the vertical direction. The three-dimensional model is discretized by the semi-implicit finite-volume method, in that the free-surface and the vertical diffusion are semi-implicit, thereby removing stability limitations associated with the surface gravity wave and vertical diffusion terms. The remaining terms in the momentum equations are discretized explicitly by an integral method. The partial cell method is used for resolving topography, which enables the model to better represent irregular topography. The model has been tested against analytical cases for wind and tidal oscillation circulation, and is applied to simulating the tidal flow in the Bohal Sea. The results are in good agreement both with the analytical solutions and measurement results.