Molecular investigation into the transformation of recalcitrant dissolved organic sulfur in refinery sour water during stripping process

Refinery sour water primarily originates from the tops of towers in various units and coker condensate,and cannot be discharged directly to a wastewater treatment plant due to high levels of chemical oxygen demand(COD)and organic sulfur contents.Even after the recovery of H_(2)S from the sour water by the stripping process,the effluent still contains a high concentration of dissolved organic sulfur(DOS),which can have a huge bad influence.While chemical composition of dissolved organic matter(DOM)in refinery wastewater has been extensively studied,the investigation of recalcitrant DOS from sour waters remains unclear.In the present study,chemical composition of sour water DOMs(especially DOS)was investigated using fluorescence spectroscopy(excitation-emission matrix,EEM)and mass spectrometry,including gas chromatography-mass spectrometry(GC-MS)and high-resolution Orbitrap MS.The GC-MS and EEM results showed that volatile and low-aromaticity compounds were effectively removed during the stripping process,while compounds with high hydrophilicity and humification degree were found to be more recalcitrant.The Orbitrap MS results showed that weak-polar oxygenated sulfur compounds were easier to be removed than oxygenated compounds.However,the effluent still contained significant amounts of sulfur-containing compounds with multiple sulfur atoms,particularly in the form of highly unsaturated and aromatic compounds.The Orbitrap MS/MS results of CHOS-containing compounds from the effluent indicate that the sulfur atoms may exist as sulfonates,disulfide bonds,thioethers.Understanding the composition and structure of sour water DOS is crucial for the development of effective treatment processes that can target polysulfide compounds and minimize their impact on the environment.

二维矩形Strip Packing问题的算法研究与改进

二维矩形Strip Packing问题的约束条件及目标函数与基本型二维矩形Packing问题类似,都是在有限的矩形容器中,有效地摆放各个矩形块,以最大化容器利用率为目标。为了解决这一NP-hard问题,该文在邓见凯、王磊提出的拟人型全局优化算法的基础上进行了深入的算法研究与改进。针对Strip Packing问题特点,提出了QHG(Quasi-Human Group)算法,其核心改进涵盖了多个方面,包括扩充初始点集合、删除和替换评价标准以及扩大邻域空间搜索范围。和单个局部极小值点的迭代相比,对局部极小值点集合进行迭代所生成布局优度更高,跳坑策略用于跳出局部极小值点,将搜索引向有希望的区域,优美度枚举有望进一步提高布局优度。通过这些措施,QHG算法更好地模拟人类决策过程,提高了全局搜索的效率。为评估QHG算法性能,对8组标准问题实例(C组、N组、NT组、CX组、NP组、ZDF组、2sp组、bwmv组)进行了大量实验。实验结果表明,QHG算法生成的布局优度优于当前国际文献中的几种较先进算法,展现了其在Strip Packing问题上的卓越性能。

A dual-RPA based lateral flow strip for sensitive,on-site detection of CP4-EPSPS and Cry1Ab/Ac genes in genetically modified crops

Traditional transgenic detection methods require high test conditions and struggle to be both sensitive and efficient.In this study,a one-tube dual recombinase polymerase amplification(RPA)reaction system for CP4-EPSPS and Cry1Ab/Ac was proposed and combined with a lateral flow immunochromatographic assay,named“Dual-RPA-LFD”,to visualize the dual detection of genetically modified(GM)crops.In which,the herbicide tolerance gene CP4-EPSPS and the insect resistance gene Cry1Ab/Ac were selected as targets taking into account the current status of the most widespread application of insect resistance and herbicide tolerance traits and their stacked traits.Gradient diluted plasmids,transgenic standards,and actual samples were used as templates to conduct sensitivity,specificity,and practicality assays,respectively.The constructed method achieved the visual detection of plasmid at levels as low as 100 copies,demonstrating its high sensitivity.In addition,good applicability to transgenic samples was observed,with no cross-interference between two test lines and no influence from other genes.In conclusion,this strategy achieved the expected purpose of simultaneous detection of the two popular targets in GM crops within 20 min at 37°C in a rapid,equipmentfree field manner,providing a new alternative for rapid screening for transgenic assays in the field.

Simultaneous tectonic Descemet stripping endothelial keratoplasty and tectonic Bowman layer transplant for the management of corneal perforation

AIM:To report the outcomes of three cases of corneal perforation managed with simultaneous tectonic Descemet stripping endothelial keratoplasty(t-DSEK)and tectonic Bowman layer transplant(t-BLT)as an alternative to tectonic penetrating keratoplasty(t-PKP).METHODS:Three eyes of three patients receiving simultaneous t-DSEK and t-BLT for corneal perforation were included.The technique for DSEK was modified depending on individual requirements.The t-BLT technique was standardised using an 8 mm graft and fixated with a running suture.Success was measured by the ability of this procedure to close a corneal perforation.RESULTS:All three cases achieved tectonic eye globe restoration and remained stable during the minimum 3-month observation period.Reinterventions were relatively common:2 cases required amniotic membrane transplant for persistent epithelial defects.One case required DSEK rebubbling.One case developed angle closure glaucoma requiring surgical peripheral iridectomy.CONCLUSION:Simultaneous t-DSEK and t-BLT may be a useful strategy for the management of corneal perforation as an alternative management to t-PKP for selected cases.

Soybean maize strip intercropping:A solution for maintaining food security in China

The practice of intercropping leguminous and gramineous crops is used for promoting sustainable agriculture,optimizing resource utilization,enhancing biodiversity,and reducing reliance on petroleum products.However,promoting conventional intercropping strategies in modern agriculture can prove challenging.The innovative technology of soybean maize strip intercropping(SMSI)has been proposed as a solution.This system has produced remarkable results in improving domestic soybean and maize production for both food security and sustainable agriculture.In this article,we provide an overview of SMSI and explain how it differs from traditional intercropping.We also discuss the core principles that foster higher yields and the prospects for its future development.

A simple route for preparation of TRIP-assisted Si-Mn steel with excellent performance using direct strip casting

The complex producing procedures and high energy-consuming limit the large-scale production and application of advanced high-strength steels(AHSSs).In this study,the direct strip casting(DSC)technology with unique sub-rapid solidification characteristics and cost advantages was applied to the production of low-alloy Si-Mn steel with the help of quenching&partitioning(Q&P)concept to address these issues.Compared this method with the conventional compact strip production(CSP)process,the initial microstructure formed under different solidification conditions and the influence of heat treatment processes on the final mechanical properties were in-vestigated.The results show that the initial structure of the DSC sample is a dual-phase structure composed of fine lath martensite and bainite,while the initial structure of the CSP sample consists of pearlite and ferrite.The volume fraction and carbon content of retained austenite(RA)in DSC samples are usually higher than those in CSP samples after the same Q&P treatment.DSC samples typically demonstrate better comprehensive mechanical properties than the CSP sample.The DSC sample partitioned at 300℃ for 300 s(DSC-Pt300)achieves the best comprehensive mechanical properties,with yield strength(YS)of 1282 MPa,ultimate tensile strength(UTS)of 1501 MPa,total elongation(TE)of 21.5%,and product of strength and elongation(PSE)as high as 32.3 GPa·%.These results indicate that the excellent mechanical properties in low-alloy Si-Mn steel can be obtained through a simple process(DSC-Q&P),which also demonstrates the superiority of DSC technology in manufacturing AHSSs.

Effect of phosphorus content on interfacial heat transfer and film deposition behavior during the high-temperature simulation of strip casting

The interfacial wettability and heat transfer behavior are crucial in the strip casting of high phosphorus-containing steel.A hightemperature simulation of strip casting was conducted using the droplet solidification technique with the aims to reveal the effects of phosphorus content on interfacial wettability,deposited film,and interfacial heat transfer behavior.Results showed that when the phosphorus content increased from 0.014wt%to 0.406wt%,the mushy zone enlarged,the complete solidification temperature delayed from1518.3 to 1459.4℃,the final contact angle decreased from 118.4°to 102.8°,indicating improved interfacial contact,and the maximum heat flux increased from 6.9 to 9.2 MW/m2.Increasing the phosphorus content from 0.081wt%to 0.406wt%also accelerated the film deposition rate from 1.57 to 1.73μm per test,resulting in a thickened naturally deposited film with increased thermal resistance that advanced the transition point of heat transfer from the fifth experiment to the third experiment.

High-resolution imaging of magnetic fields of banknote anti-counterfeiting strip using fiber diamond probe

Counterfeiting of modern banknotes poses a significant challenge,prompting the use of various preventive measures.One such measure is the magnetic anti-counterfeiting strip.However,due to its inherent weak magnetic properties,visualizing its magnetic distribution has been a longstanding challenge.In this work,we introduce an innovative method by using a fiber optic diamond probe,a highly sensitive quantum sensor designed specifically for detecting extremely weak magnetic fields.We employ this probe to achieve high-resolution imaging of the magnetic fields associated with the RMB 50denomination anti-counterfeiting strip.Additionally,we conduct computer simulations by using COMSOL Multiphysics software to deduce the potential geometric characteristics and material composition of the magnetic region within the anti-counterfeiting strip.The findings and method presented in this study hold broader significance,extending the RMB 50 denomination to various denominations of the Chinese currency and other items that employ magnetic anti-counterfeiting strips.These advances have the potential to significantly improve and promote security measures in order to prevent the banknotes from being counterfeited.

Analysis of spot defects on the surface of a cold-rolled Fe-36%Ni alloy strip

Many spot defects were found on the surface of a cold-rolled Fe-36%Ni alloy strip produced in a factory,which seriously affected the surface quality of the product.Through metallographic microscopy and scanning electron microscopy analyses,it was found that the spot defects were caused by the residual oxide layer on the surface of the cold-rolled Fe-36%Ni alloy strip after hydrogen annealing.By properly increasing the grinding amount of the blank before cold rolling to remove the oxide layer,the spot defects on the surface of the cold-rolled strip were effectively eliminated,and the surface quality of the product was ensured.

Similarity evaluation model for the internal defect detection of strip steel

An internal defect meter is an instrument to detect the internal inclusion defects of cold-rolled strip steel.The detection accuracy of the equipment can be evaluated based on the similarity of the multiple detection data obtained for the same steel coil.Based on the cosine similarity model and eigenvalue matrix model,a comprehensive evaluation method to calculate the weighted average of similarity is proposed.Results show that the new method is consistent with and can even replace artificial evaluation to realize the automatic evaluation of strip defect detection results.

径向对称电导率重构的Layer-Stripping方法

利用Layer-Stripping方法,针对电导率为径向对称分布的情形给出一种重构电导率的数值算法.特别地,针对分层半径的选取提出了3种方法以增强算法的稳定性,并通过数值实验证明了算法的可行性.

Removing ammonia from skim by air stripping with rotating packed bed

Based on the effects of skim components on ammonium removal as well as the current processing technology, a new process-intensified technology of removing ammonia from skim by air stripping on rotating packed bed was proposed. The experiments were conducted on a wave-thread packed Rotating Packed Bed(RPB) under atmospheric pressure, suggesting that, in terms of order of importance, the ammonium concentration of feed-stock(x_w), the average ultra-gravity factor(β), feed-stock flux(L), and gas flux(G) had significant impact on ammonium removal rate(η) and the ammonium concentration of products(x_D). In the experiment, mass-transfer coefficient in gas phase(k_ya_e) increases with the increase of β, G/L, and L. The ammonium concentration of products decreases with the increase of β, G/L and the increase of L. The ammonium concentration of products would be as low as ~0.10% and the ammonia removal rate would be 63.21% when skim temperature was 25 °C, x_w0.28%, β 133.2, and G/L 15.0 m^3·L^(-1). Experiment results indicated that the proposed technology for removing ammonium from skim on a rotating packed bed would be a new process-intensified technique compared with traditional aeration process and centrifugal atomization method.

Study on Semi-Continuous Technology System for Soft Material Stripping in Large Surface Mines

Continuous and semi-continuous mining technology has become the main trend of modern surface mines in the world. According to the deposit characteristics of coal basin in China and Chinese situation,this paper discussed the new semi-continuous technology── shovel - transfer wagon-belt conveyor and its application prospect in large surface coal mines in China.

Effect of Packing Materials and Other Parameters on the Air Stripping Process for the Removal of Ammonia from the Wastewater of Natural Gas Fertilizer Factory

Air-stripping method was used to remove ammonia from the wastewater collected from natural gas fertilizer factory. Different materials were used as packing materials for the air stripping system. The effect of pH over 10.5, air-water flow ratio, nature of packing materials, height of materials and initial influent concentration of ammonia on air stripping unit were investigated. An attempt has been made to find out the stripping con-stant. Stripping constant was found to be .001, 0014, .001 and .0009 for coal, plastic ring, stone chips and wood chips, respectively. Best result was found for plastic ring for its higher surface area. Wood chips did not give good result, because the chips amalgamate with each other and hence reduces the surface area.

Extraction and Stripping of Ytterbium (Ⅲ) from H_2SO_4 Medium by Cyanex 923

The extraction and stripping of ytterbium（ Ⅲ） from sulfuric acid medium using Cyanex 923 in heptane solution was investigated. The effects of extraetant concentration, pH and sulfate ion as well as stripping agents, acidity and temperature on the extraction and stripping were studied. The equilibrium constants and thermodynamic parameters, such as △n （10.76 kJ·mol^-1）, △G （-79.26 kJ·mol^-1） and △S （292.41 J·K^-1·mol^-1）, were calculated. The extraction mechanism and the complex species extracted were determined by slope analysis and FTIR spectra. Furthermore, it was found that the extraction of Yb （Ⅲ） from sulfuric acid medium by Cyanex 923 increased with pH, concentration of SO4^2-, HSO4^-, and extractant concentration, and approximately a quantitative extraction of Yb（ Ⅲ） was achieved at an equilibrium pH near 3.0, and the extracted complex was YbSO4（HSO4）·2Cyanex923（o）.

Surface Analysis of Chemical Stripping Titanium Alloy Oxide Films

The chemical stripping method of titanium alloy oxide films was studied. An environment friendly solution hydrogen peroxide and sodium hydroxide without hydrofluoric acid or fluoride were used to strip the oxide films. The morphologies of the surface and cross-section of the oxide films before and after the films stripping were characterized by using scanning electron microscopy （SEM）. The microstructure and chemical compositions of the oxide films before and after the films stripping were investigated by using Raman spectroscopy （Raman） and X-ray photoelectron spectroscopy （XPS）. It was shown that the thickness of the oxide film was in the range of 5-6 μm. The oxide films were stripped for 2 to 8 min in the solution. Moreover, the effect of the stripping time on the efficiency of the film stripping was investigated, and the optimum stripping time was between 6-8 min. When the stripping solution completely dissolved the whole film, the α/β microstructure of the titanium alloy Ti-10V-2Fe-3Al was partly revealed. The stripping mechanism was discussed in terms of the dissolution of film delamination. The hydrogen peroxide had a significant effect on the dissolution of the titanium alloy anodic oxide film. The feasibility of the dissolution reaction also was evaluated.

Visual acuity and endothelial cell density with respect to the graft thickness in Descemet's stripping automated endothelial keratoplasty: one year results

AIM: To evaluate the visual acuity and endothelial cell density according to the thickness in Descemet’s stripping automated endothelial keratoplasty(DSAEK)one year after surgery.METHODS: DSAEK patients’ data were reviewed. Thirty seven eyes of 37 patients who underwent DSAEK for pseudophakic bullous keratopathy(PBK) were included in this study. Graft thickness was measured with optical coherence tomography(OCT) 12 mo after DSAEK. Eyes were divided into 3 groups based on the graft thickness:thick(】200 μm), medium-thick(150-200 μm) and thin(【150 μm). Best corrected visual acuity(BCVA),endothelial cells density(ECD) and complications were assessed and comparisons were done between groups.RESULTS: Median thickness of postoperative grafts was 188(range 73-317 μm). There was no significant difference in age, sex, preoperative BCVA, or follow-up period between DSAEK groups. At postoperative 12 mo,mean BCVA was 0.28±0.10 in thick graft group, 0.52±0.08 in medium-thick graft group, and 0.72 ±0.06 in thin graft group. Thin grafts showed better postoperative BCVA as compared with the medium-thick and thick grafts(P =0.001). Thick graft group had 1637.44 ±88.19-mm2,medium thick graft had 1764.50±34.28-mm2 and thin graft group had 1845.30 ±65.62-mm2. Thin graft group had better ECD at 12 mo after surgery(P =0.001).CONCLUSION: Thin grafts after DSAEK ensure better visual rehabilitation. Eyes with thin grafts had significantly lesser loss of ECD compared to eyes withmedium-thick and thick grafts one year after surgery.

DYNAMIC ANALYSIS OF GAS STRIPPING DURING ETHANOL FERMENTATION IN CSTR

The dynamic behavior of gas stripping during ethanol fermentation (GSEF) in a CSTR for a combined product-substrate inhibition case has been investigated in terms of bifurcation and regional stability theory. The region of optimal operating steady states and the effect of initial concentration on the attraction region have been established. The analytical results can be used to predict and promote the GSEF system moving towards an optimal operating steady state.

Kinetics of stripping of gold loaded in DBC organic phase by sodium sulfite

The kinetics of stripping of gold loaded in dibutyl carbito （DBC） organic phase by sodittm sulfite was investigated in a Lewis cell. After the stirring speed reached 400 r·min^-1, the reaction of gold stripping conformed with the pseudo-first-order reaction. The stripping rate of gold was in direct proportion to interracial area, concentration of sodittm sulfite and reaction temperature. The experimental results showed that the process of stripping gold was controlled by interfacial chemical reaction, and its activation energy was 36.06 kJ·mol^-1. The kinetics equation was put forward for gold stripping by sodium sulfite.

New insights into “dead lithium” during stripping in lithium metal batteries

Lithium (Li) metal attributes to the promising anode but endures the low Columbic efficiency (CE) and safety issues from the inactive Li accumulation. The metallic Li which is isolated from the lithium anode (named dead Li^(0)) consists the major component of the inactive Li. We systematically and meticulously investigated the formation and evaluation of dead Li^(0) during stripping process from electron transfer, the oxidation of Li^(0) to Li^(+) and the diffusion of Li^(+) through solid electrolyte interphase (SEI). The above-mentioned processes were regulated by adjusting the contact sites of electron channels, the dynamic rate of conversion from Li^(0) to Li^(+), and the structure as well as components of SEI. The design principles for achieving less dead Li^(0) and higher CE are proposed as a proof of concept in lithium metal batteries. This new insight sheds a comprehensive light on dead Li^(0) formation and guides the next-generation safe batteries for future application.