Electric-spark deposition （ESD） was adopted for depositing a Ti（ CN） -based ceramic coating on the TC4 titanium alloy substrate using a laboratory-developed electric-spark deposition system, a nitrogen-sealed atmo...Electric-spark deposition （ESD） was adopted for depositing a Ti（ CN） -based ceramic coating on the TC4 titanium alloy substrate using a laboratory-developed electric-spark deposition system, a nitrogen-sealed atmosphere and graphite electrode. The surface morphology, microstructure, interfacial behavior between the coatings and substrate, phase and element composition of the coatings were investigated by scanning electron microscope （ SEM ） , X-ray diffraction （ XRD ） , X-ray photoelectron spectroscopy （ XPS ） and Auger electron spectroscopy （ AES ） . Microhardness profile was measured with a Vickers microhardness tester. The results show that metallurgical bond between the coating and substrate is realized and the phase of coatings are made up of Ti（ CN ） spherocrystal and dendritic crystal, TiV and C. Ti（ CN） ceramic particles, which is in-situ synthesized by the reaction among titanium from the substrate, carbon from the graphite electrode and nitrogen from the shielding nitrogen gas, is about 600 mn and distributes dispersively among the coatings. Microharduess profile falls off with the coatings thickness increasing and the highest microhardness values of the superficial coating could be up to 1 496HV, which is six times more than that of the substrate.展开更多
Fe-Cr-Ti-C composite powder was synthesized by precursor carbonization-composition process using the mixture of ferrotitanium, chromium, iron powder and precursor sucrose as raw material. And then the Fe-Cr-Ti-C coati...Fe-Cr-Ti-C composite powder was synthesized by precursor carbonization-composition process using the mixture of ferrotitanium, chromium, iron powder and precursor sucrose as raw material. And then the Fe-Cr-Ti-C coating was prepared by reactive plasma cladding method. Microstructure of the samples was observed by scanning electron microscope （SEM）, the phases were determined by X-ray diffraction （XRD）, and the wear resistance was evaluated under dry sliding wear test conditions at room temperature. Results indicate that the composite coating consists of primary austenite and dendritic eutectic austenite, chrysanthemum-shaped eutectic （Cr, Fe ） 7 C3 and TiC carbide. TiC presents the gradient distribution and different shapes in the coating, corresponding to equiaxial structure both in fusion zone and central zone, while it presents dendritic structure on the surface, respectively. The wear mass loss is insensitive to load for the coating while it increases rapidly for Q235 steel base metal in this test. The wear mass loss ofQ235 steel is 14 times as that of the composite coating under applied load of 40 kg.展开更多
Using free bending method,the residual stress of the Ti(CN)coating on alloy Nb-752 was measured to be 2-3 GPa of which the thermal stress cmounts to 10—20%.An analysis on coating/substrate interface stress state show...Using free bending method,the residual stress of the Ti(CN)coating on alloy Nb-752 was measured to be 2-3 GPa of which the thermal stress cmounts to 10—20%.An analysis on coating/substrate interface stress state shows that the share stress at it is about O.1—0.2 GPa.The demage mode of the coating under external loading was proposed in terms of the amount and the direction of loading.展开更多
An oxidation resistant Al-Cu-Fe quasicrystalline coating was fabricated on substrate of Ti alloy by low pressure plasma spraying (LPPS) method. As-sprayed Al-Cu-Fe coating has a rapidly solidified lamellar microstruct...An oxidation resistant Al-Cu-Fe quasicrystalline coating was fabricated on substrate of Ti alloy by low pressure plasma spraying (LPPS) method. As-sprayed Al-Cu-Fe coating has a rapidly solidified lamellar microstructure consisting of quasicrystalline phase and crystalline phase. The formation of quasicrystalline coating is related to the annealing. The results from the ox!dat!on experiments showed that Al-Cu-Fe quasicrystalline coating improved the oxidation resistance of Ti-base alloys. During the oxidation period there is no evident spallation of the coating from the substrate. Oxide formed on the surface of Al-Cu-Fe quasicrystalline coating after oxidation consisted of Al2O3. Oxidation occurs Ieading to a change of concentration and phase transformation in the coating surface. Selective oxidation of AI transforms the quasicrystalline phase into the phase.展开更多
基金The work was supported by the Natural Science Foundation of Hebei Province of China under Grant No. E2007000566.
文摘Electric-spark deposition （ESD） was adopted for depositing a Ti（ CN） -based ceramic coating on the TC4 titanium alloy substrate using a laboratory-developed electric-spark deposition system, a nitrogen-sealed atmosphere and graphite electrode. The surface morphology, microstructure, interfacial behavior between the coatings and substrate, phase and element composition of the coatings were investigated by scanning electron microscope （ SEM ） , X-ray diffraction （ XRD ） , X-ray photoelectron spectroscopy （ XPS ） and Auger electron spectroscopy （ AES ） . Microhardness profile was measured with a Vickers microhardness tester. The results show that metallurgical bond between the coating and substrate is realized and the phase of coatings are made up of Ti（ CN ） spherocrystal and dendritic crystal, TiV and C. Ti（ CN） ceramic particles, which is in-situ synthesized by the reaction among titanium from the substrate, carbon from the graphite electrode and nitrogen from the shielding nitrogen gas, is about 600 mn and distributes dispersively among the coatings. Microharduess profile falls off with the coatings thickness increasing and the highest microhardness values of the superficial coating could be up to 1 496HV, which is six times more than that of the substrate.
基金Supported by Natural Science Foundation of Shandong Province （No. ZR2011EMM017 ）.
文摘Fe-Cr-Ti-C composite powder was synthesized by precursor carbonization-composition process using the mixture of ferrotitanium, chromium, iron powder and precursor sucrose as raw material. And then the Fe-Cr-Ti-C coating was prepared by reactive plasma cladding method. Microstructure of the samples was observed by scanning electron microscope （SEM）, the phases were determined by X-ray diffraction （XRD）, and the wear resistance was evaluated under dry sliding wear test conditions at room temperature. Results indicate that the composite coating consists of primary austenite and dendritic eutectic austenite, chrysanthemum-shaped eutectic （Cr, Fe ） 7 C3 and TiC carbide. TiC presents the gradient distribution and different shapes in the coating, corresponding to equiaxial structure both in fusion zone and central zone, while it presents dendritic structure on the surface, respectively. The wear mass loss is insensitive to load for the coating while it increases rapidly for Q235 steel base metal in this test. The wear mass loss ofQ235 steel is 14 times as that of the composite coating under applied load of 40 kg.
文摘Using free bending method,the residual stress of the Ti(CN)coating on alloy Nb-752 was measured to be 2-3 GPa of which the thermal stress cmounts to 10—20%.An analysis on coating/substrate interface stress state shows that the share stress at it is about O.1—0.2 GPa.The demage mode of the coating under external loading was proposed in terms of the amount and the direction of loading.
文摘An oxidation resistant Al-Cu-Fe quasicrystalline coating was fabricated on substrate of Ti alloy by low pressure plasma spraying (LPPS) method. As-sprayed Al-Cu-Fe coating has a rapidly solidified lamellar microstructure consisting of quasicrystalline phase and crystalline phase. The formation of quasicrystalline coating is related to the annealing. The results from the ox!dat!on experiments showed that Al-Cu-Fe quasicrystalline coating improved the oxidation resistance of Ti-base alloys. During the oxidation period there is no evident spallation of the coating from the substrate. Oxide formed on the surface of Al-Cu-Fe quasicrystalline coating after oxidation consisted of Al2O3. Oxidation occurs Ieading to a change of concentration and phase transformation in the coating surface. Selective oxidation of AI transforms the quasicrystalline phase into the phase.
