Operation of Kerr-lens mode-locked Ti:sapphire laser in the non-soliton regime

A Kerr-lens mode-locked Ti：sapphire laser operating in a non-soliton regime is demonstrated. Dispersive wave generation is observed as a result of third order dispersion in the vicinity of zero dispersion. The characteristics of the Ti：sapphire l^ser operating in a positive dispersion regime are presented, where the oscillator directly generates pulses with duration continuously tunable from 0.37 ps to 2.11 ps, and 36 fs pulses are achieved atter extracavity compression. The oscillation is numerically simulated with an extended nonlinear Schr6dinger equation, and the simulation results are in good agreement with the experimental results.

An all-solid-state high power quasi-continuous-wave tunable dual-wavelength Ti：sapphire laser system using birefringence filter

This paper describes a tunable dual-wavelength Ti：sapphire laser system with quasi-continuous-wave and high-power outputs. In the design of the laser, it adopts a frequency-doubled Nd：YAG laser as the pumping source, and the birefringence filter as the tuning element. Tunable dual-wavelength outputs with one wavelength range from 700 nm to 756.5 nm, another from 830 nm to 900mn have been demonstrated. With a pump power of 23 W at 532 nm, a repetition rate of 7 kHz and a pulse width of 47.6 ns, an output power of 5.1 W at 744.8 nm and 860.9 nm with a pulse width of 13.2 ns and a line width of 3 nm has been obtained, it indicates an optical-to-optical conversion efficiency of 22.2%.

A High-Pulse-Energy High-Beam-Quality Tunable Ti:Sapphire Laser Using a Prism-Dispersion Cavity

A high-pulse-energy high-beam-quality tunable Ti：sapphire laser pumped by a frequency-doubled Nd：YAG laser is demonstrated. Using a fused-silica prism as the dispersion element, a tuning range of 740-855 nm is obtained. At an incident pump energy of 774mJ, the maximum output energy of 104mJ at 790nm with a pulse width of 100μs is achieved at a repetition rate of 5 Hz. To the best of our knowledge, it is the highest pulse energy at 790 nm with pulse width of hundred micro-seconds for an all-solid-state laser. The linewidth of output is 0.5 nm, and the beam quality factor M2 is 1.16. The high-pulse-energy high-beam-quality tunable Ti：sapphire laser in the range of 740-855 nm can be used to establish a more accurate and consistent absolute scale of second-order optical-nonlinear coefficients for KBe2BO3F2 measured in a wider wavelength range and to assess Miller＇s rule quantitatively.

Tunable Supercontinuum Generated in a Yb^3＋-Doped Microstructure Fiber Pumped by Ti：Sapphire Femtosecond Laser

We experimentally demonstrate that a tunable supercontinuum（SC） can be generated in a Yb3＋-doped microstructure fiber by the concept of wavelength conversion with a Ti：sapphire femtosecond（fs） laser as the pump.Experimental results show that an emission light around 1040 nm in an anomalous dispersion region is first generated and amplified by fs pulses in the normal dispersion region. Then, SC spectra from 1100 to 1380 nm and 630 to 840 nm can be achieved by combined effects of higher-order soliton fission and Raman soliton self-frequency shift in the anomalous dispersion region and self-phase modulation, dispersive wave, and four-wave mixing in the normal dispersion region. It is also demonstrated that the 20 nm change of pump results in a 280 nm broadband shift of soliton and the further red-shift of soliton is limited by OH-absorption at 1380 nm.

Long-term frequency-stabilized optical frequency comb based on a turnkey Ti:sapphire mode-locked laser

We report a long-term frequency-stabilized optical frequency comb at 530–1100 nm based on a turnkey Ti:sapphire modelocked laser.With the help of a digital controller,turnkey operation is realized for the Ti:sapphire mode-locked laser.Under optimized design of the laser cavity,the laser can be mode-locked over a month,limited by the observation time.The combination of a fast piezo and a slow one inside the Ti:sapphire mode-locked laser allows us to adjust the cavity length with moderate bandwidth and tuning range,enabling robust locking of the repetition rate(f_(r)) to a hydrogen maser.By combining a fast analog feedback to pump current and a slow digital feedback to an intracavity wedge and the pump power of the Ti:sapphire mode-locked laser,the carrier envelope offset frequency(f_(ceo)) of the comb is stabilized.We extend the continuous frequency-stabilized time of the Ti:sapphire optical frequency comb to five days.The residual jitters of f;and f;are 0.08 m Hz and 2.5 m Hz at 1 s averaging time,respectively,satisfying many applications demanding accuracy and short operation time for optical frequency combs.

Spatiotemporal coupling investigations for Ti:sapphire-based multi-PW lasers

Emerging multi-PW-class lasers and their envisioned laser-plasma interaction applications in unprecedented intensity regimes set a very demanding frame for the precise understanding of the finest properties of these systems.In this work we present a synthesis of simulation studies on a series of less known or even completely disregarded spatiotemporal effects that could potentially impact greatly the performances of high-intensity lasers.

Optimization of highly efficient terahertz generation in lithium niobate driven by Ti:sapphire laser pulses with 30 fs pulse duration

We systematically study the optimization of highly efficient terahertz（THz） generation in lithium niobate（LN）crystal pumped by 800 nm laser pulses with 30 fs pulse duration. At room temperature, we obtain a record optical-to-THz energy conversion efficiency of 0.43% by chirping the pump laser pulses. Our method provides a new technique for producing millijoule THz radiation in LN via optical rectification driven by joule-level Ti：sapphire laser systems, which deliver sub-50-fs pulse durations.

Intense terahertz generation from photoconductive antennas

In this paper,we review the past and recent works on generating intense terahertz(THz)pulses from photoconductive antennas(PCAs).We will focus on two types of large-aperture photoconductive antenna(LAPCA)that can generate high-intensity THz pulses(a)those with large-aperture dipoles and(b)those with interdigitated electrodes.We will first describe the principles of THz generation from PCAs.The critical parameters for improving the peak intensity of THz radiation from LAPCAs are summarized.We will then describe the saturation and limitation process of LAPCAs along with the advantages and disadvantages of working with widebandgap semiconductor substrates.Then,we will explain the evolution of LAPCA with interdigitated electrodes,which allows one to reduce the photoconductive gap size,and thus obtain higher bias fields while applying lower voltages.We will also describe recent achievements in intense THz pulses generated by interdigitated LAPCAs based on wide-bandgap semiconductors driven by ampli-fied lasers.Finally,we will discuss the future perspectives of THz pulse generation using LAPCAs.