Titanium oxide coatings were synthesized on Ti-2Al-2.5Zr alloy substrates by micro-arc oxidation （MAO） technique. The surface features of the coatings were studied by scanning electron microscopy. The micro-arc disc...Titanium oxide coatings were synthesized on Ti-2Al-2.5Zr alloy substrates by micro-arc oxidation （MAO） technique. The surface features of the coatings were studied by scanning electron microscopy. The micro-arc discharge channels of the Ti-2Al-2.5Zr alloy decrease while the discharge channel size increases clearly with an increase in treating time. With an increase of the coating thickness the porous layer thickness increases apparently. Phase composition of the surface layers of the coatings was evaluated by X-ray diffraction and X-ray photoelectron spectroscopy. The results of XRD and XPS analysis show that the MAO coating mainly consists of anatase and rutile TiO2.展开更多
The characteristics of fatigue crack initiation in Ti-5AI-4Sn-2Zr1Mo-O.7Nd-O.25Si alloy wereStudied. Two modes Of fatigue crack initiation were found. The Nd-rich phase particles displaybetter resistance to fatigue cr...The characteristics of fatigue crack initiation in Ti-5AI-4Sn-2Zr1Mo-O.7Nd-O.25Si alloy wereStudied. Two modes Of fatigue crack initiation were found. The Nd-rich phase particles displaybetter resistance to fatigue crack initiation than the matrix at lower stress.展开更多
The flattening test,using one pair paralleled plates to flatten tube structure radially,is generally employed to examine the ductility of tube used in once through steam generator(OTSG).This study focuses on the stres...The flattening test,using one pair paralleled plates to flatten tube structure radially,is generally employed to examine the ductility of tube used in once through steam generator(OTSG).This study focuses on the stress condition and deformation mechanism analysis on the concentrated stress regions of Ti-2 Al-2.5 Zr alloy tube during the flattening test.Firstly,the finite element analysis was performed using the commercial software ABAQUS to determine the stress condition.Secondly,the Electron BackScattered Diffraction(EBSD)was implemented to observe the microstructure evolution of Ti-2 Al-2.5 Zr alloy.Finally,Schmid law was employed to analyze the activated deformation mechanism under condition of the complex stress.It was found that the condition of the complex stress in stress concentration regions,including tension and compression regions,can be simplified into two directional stresses condition.In grains whose c-axis is nearly towards TD and ND,the strain is mainly accommodated by prismatic slip,whereas in grains whose c-axis deviates about 45°from ND to TD mainly by basal slip.The{10-12}extensive twin and corresponding parent grain orientation mainly relied on the stress condition.Additionally,the intergranular twin pairs connected at common grain boundaries(GBs)with high strain compatibility were found at low angle GBs,which were activated under a combination of macro stress and strain compatibility effect.展开更多
基金the National Key Laboratory for Nuclear Fuel and Materials,Nuclear Power Institute of China the Program for New Century Excellent Talents in Chinese University.
文摘Titanium oxide coatings were synthesized on Ti-2Al-2.5Zr alloy substrates by micro-arc oxidation （MAO） technique. The surface features of the coatings were studied by scanning electron microscopy. The micro-arc discharge channels of the Ti-2Al-2.5Zr alloy decrease while the discharge channel size increases clearly with an increase in treating time. With an increase of the coating thickness the porous layer thickness increases apparently. Phase composition of the surface layers of the coatings was evaluated by X-ray diffraction and X-ray photoelectron spectroscopy. The results of XRD and XPS analysis show that the MAO coating mainly consists of anatase and rutile TiO2.
文摘The characteristics of fatigue crack initiation in Ti-5AI-4Sn-2Zr1Mo-O.7Nd-O.25Si alloy wereStudied. Two modes Of fatigue crack initiation were found. The Nd-rich phase particles displaybetter resistance to fatigue crack initiation than the matrix at lower stress.
基金financial support from the National Natural Science Foundation of China(Nos.51875398 and 51471116)the Sichuan Science and Technology Program(2019ZDZX0001)+1 种基金the Project of Nuclear Power Technology Innovation Center of Science Technology and Industry for National Defense(HDLCXZX-2019-ZH-26)the Science and Technology on Reactor System Design Technology Laboratory,Nuclear Power Institute of China。
文摘The flattening test,using one pair paralleled plates to flatten tube structure radially,is generally employed to examine the ductility of tube used in once through steam generator(OTSG).This study focuses on the stress condition and deformation mechanism analysis on the concentrated stress regions of Ti-2 Al-2.5 Zr alloy tube during the flattening test.Firstly,the finite element analysis was performed using the commercial software ABAQUS to determine the stress condition.Secondly,the Electron BackScattered Diffraction(EBSD)was implemented to observe the microstructure evolution of Ti-2 Al-2.5 Zr alloy.Finally,Schmid law was employed to analyze the activated deformation mechanism under condition of the complex stress.It was found that the condition of the complex stress in stress concentration regions,including tension and compression regions,can be simplified into two directional stresses condition.In grains whose c-axis is nearly towards TD and ND,the strain is mainly accommodated by prismatic slip,whereas in grains whose c-axis deviates about 45°from ND to TD mainly by basal slip.The{10-12}extensive twin and corresponding parent grain orientation mainly relied on the stress condition.Additionally,the intergranular twin pairs connected at common grain boundaries(GBs)with high strain compatibility were found at low angle GBs,which were activated under a combination of macro stress and strain compatibility effect.
