期刊文献+
共找到12篇文章
< 1 >
每页显示 20 50 100
Ti-45Al-10Nb合金的高温氧化行为 被引量:6
1
作者 程晓英 万晓景 沈嘉年 《材料研究学报》 EI CAS CSCD 北大核心 2003年第1期50-54,共5页
研究了Ti-45Al-10Nb(原子分数,%)合金在800~960℃在氧气和空气中的氧化行为。结果表明,该合金具有较好的高温抗氧化性能,其氧化增重速率与铁基耐热不锈钢相似或略优。与Ti-50Al合金相反,Ti-45Al-10Nb合金在空气中的氧化增重速率明显... 研究了Ti-45Al-10Nb(原子分数,%)合金在800~960℃在氧气和空气中的氧化行为。结果表明,该合金具有较好的高温抗氧化性能,其氧化增重速率与铁基耐热不锈钢相似或略优。与Ti-50Al合金相反,Ti-45Al-10Nb合金在空气中的氧化增重速率明显低于在纯氧中的氧化增重速率。X射线衍射与能谱分析表明,Ti-45Al-10Nb合金在氧气中的氧化产物主要有TiO_2和Al_2O_3,但在空气中的氧化产物中有TiN相。这是降低氧化速率的主要原因,同时,合金元素Nb稳定了氧化层中的TiN相,因而提高了合金在空气中的抗氧化性能。 展开更多
关键词 ti-45A1-10nb合金 高温氧化行为 抗氧化性 热天平 耐环境腐蚀性 钛铝铌合金
下载PDF
Oxidation resistance of powder metallurgy Ti-45Al-10Nb alloy at high temperature 被引量:1
2
作者 Xuchen Jin Peihao Ye +4 位作者 Hongrui Ji Zhuanxia Suo Boxin Wei Xuewen Li Wenbin Fang 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2022年第12期2232-2240,共9页
TiAl alloy with high Nb content,nominally Ti-45Al-10Nb,was prepared by powder metallurgy,and the oxidation resistance at 850,900,and 950℃was investigated.The high-temperature oxidation-resistance mechanism and oxidat... TiAl alloy with high Nb content,nominally Ti-45Al-10Nb,was prepared by powder metallurgy,and the oxidation resistance at 850,900,and 950℃was investigated.The high-temperature oxidation-resistance mechanism and oxidation dynamics were discussed following the oxide skin morphology and microstructural evolution analysis.The oxide skin structures were similar for 850 and 900℃,with TiO_(2)+Al_(2)O_(3)mixture covering TiO_(2)with dispersed Nb_(2)O_(5).At 950℃,the oxide skin was divided into four sublayers,from the outside to the parent metal:loose TiO_(2)+Al_(2)O_(3),dense Al_(2)O_(3),dense TiO_(2)+Nb_(2)O_(5),and TiO_(2)matrix with dispersed Nb_(2)O_(5).The Nb layer suppressed the outward diffusion of Ti atoms,hindering the growth of TiO_(2),and simultaneously promote the formation of a continuous Al_(2)O_(3)protective layer,providing the alloy with long-term high-temperature oxidation resistance. 展开更多
关键词 ti-45al-10nb elemental powder metallurgy MICROSTRUCTURE high-temperature oxidation resistance
下载PDF
Deformation-induced α_2/γ Interfaces in a Hot-deformed Ti-45Al-10Nb Alloy
3
作者 Jinguo WANG Lichun ZHANG and Guoliang CHEN (State Key Lab. for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China )Henqiang YE(Lab. of Atomic Imaging of Solids, Institute of Metal Research, Chinese Academy 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 1998年第2期132-138,共7页
The structure change of α2/γ interface in a Ti-45Al-10Nb alloy induced by hot deformation was investigated by conventional and high-resolution transmission eIectron microscopy. Two types of hot deformation induced s... The structure change of α2/γ interface in a Ti-45Al-10Nb alloy induced by hot deformation was investigated by conventional and high-resolution transmission eIectron microscopy. Two types of hot deformation induced special α2/γ intedeces, coherent intedeces with high density of ledges and semi-coherent α2/γ intedeces were found to be due to the absorption of mobile dislocations into the α2/γ inteface. For the misoriented semi-coherent α2/γ interfaces, the densities of dislocation ledges increase with the misoriented angle between (111)γ and (0001)α2 planes, and 1/3[111] Frank partial dislocations were involved in the dislocation ledges. Formation mechanism of these deformation-induced α2/γ interfaces was discussed to be related to the role of α2/γ interface5 adjusting the deformation as a dislocation sink absorbing the slipping dislocations in the γ phase 展开更多
关键词 Al TI Interfaces in a Hot-deformed ti-45al-10nb Alloy Deformation-induced
下载PDF
DEFORMATION-INDUCED α2→γ TRANSFORMATION IN A HOT DEFORMED Ti-45A1-10Nb ALLOY
4
作者 J.G.Wang L.CZhang +1 位作者 G.L.Chen H.Q.Ye 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 1998年第1期19-24,共6页
High-resolution transmission electron microscope (HRTEM) was employed to investigate the deformation-induced α2→γ phase transformation phenomenon in a hot deformed Ti-45Al-10Nb alloy. Such a tronsformation can be n... High-resolution transmission electron microscope (HRTEM) was employed to investigate the deformation-induced α2→γ phase transformation phenomenon in a hot deformed Ti-45Al-10Nb alloy. Such a tronsformation can be nucleated either at α2/γ interfaces or at stacking faults on the basal planes of the α2 phase. The growth of deformation-induced γplate is accomplished by the motion of α/6<100> Shockley partials on alternate basal planes (0001)α2, and the α/6<100> Shockley partials move in coordination rather than sweep on (0001)α2 plane one by one. It appears that no atom transportation is involved in this stress-induced α2→γ transfromation. 展开更多
关键词 intermetallic compound titanium aluminide ti-45al-10nb alloy stress-induced phase transformation interface HRTEM
下载PDF
钨对铸态Ti-45Al-8Cr-2Nb合金的高温性能影响
5
作者 肖代红 《铸造》 EI CAS CSCD 北大核心 2007年第10期1082-1085,共4页
采用高温拉伸测试及显微组织观察,研究了微量钨对铸态Ti-45Al-8Cr-2Nb(原子百分比)合金的高温性能影响。结果表明,在基体合金中添加2%W,能使铸态合金的最大伸长率降低,而最大伸长率相应的温度向高温方向移动;高温变形过程中,晶粒滑动的... 采用高温拉伸测试及显微组织观察,研究了微量钨对铸态Ti-45Al-8Cr-2Nb(原子百分比)合金的高温性能影响。结果表明,在基体合金中添加2%W,能使铸态合金的最大伸长率降低,而最大伸长率相应的温度向高温方向移动;高温变形过程中,晶粒滑动的协调过程由晶界扩散转化为体扩散;含钨的合金在800℃时的伸长率从0.62%提高到90%。 展开更多
关键词 ti-45al-8Cr-2nb合金 高温性能 显微组织
下载PDF
热处理过程对Ti-6Al-4V-10Nb合金显微组织和拉伸性能的影响(英文) 被引量:4
6
作者 孙红 余黎明 +4 位作者 刘永长 张立业 刘晨曦 李会军 吴杰峰 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2019年第1期59-66,共8页
研究热处理过程对Ti-6Al-4V-10Nb合金显微组织和力学性能的影响。采用扫描电镜、透射电镜和X射线衍射仪对合金显微组织进行研究,并通过拉伸试验对其室温和高温力学性能进行评估。结果表明,锻造和热处理后的主要组织为板条和球状初生α... 研究热处理过程对Ti-6Al-4V-10Nb合金显微组织和力学性能的影响。采用扫描电镜、透射电镜和X射线衍射仪对合金显微组织进行研究,并通过拉伸试验对其室温和高温力学性能进行评估。结果表明,锻造和热处理后的主要组织为板条和球状初生α相、次生α相和β相。次生α相的尺寸明显小于初生α相的尺寸。热处理后,初生α相的体积分数减少,次生α相的体积分数增加。随着固溶温度的升高,初生α相的体积分数明显减少,次生α相的体积分数明显增加。随着固溶温度的升高,Ti-6Al-4V-10Nb合金的屈服强度和抗拉强度明显提高。 展开更多
关键词 ti-6al-4V-10nb合金 热处理 显微组织 初生Α相 次生α相 强度
下载PDF
变形及热处理对Ti-45Al-10Nb-0.1Y合金组织与性能的影响
7
作者 吴以琴 《稀有金属材料与工程》 SCIE EI CAS CSCD 1995年第5期33-38,共6页
探讨了通过等温锻造及热处理改善Ti-45Al-10Nb-01Y显微组织,提高其室温塑性的途径。论述了合金力学性能与显微组织的关系。
关键词 等温锻造 热处理 塑性 变形 金属间化合物
下载PDF
DEFORMATION STRUCTURES IN A Ti45Al 10Nb ALLOY AT ROOM TEMPERATURE 被引量:1
8
作者 W.J. Zhang, Z.C. Liu and G.L. Chen State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China Y. W. Kim Material Research Division, Universal Energy Systems, Dayton, OH 45432, U.S.A. 《中国有色金属学会会刊:英文版》 CSCD 1999年第S1期202-207,共6页
Dislocation structures in the γ phase grains of Ti 45Al 10Nb specimens have been characterized after tensile tests at room temperature. In addition to ordinary dislocations with b=1/2〈110], a certain density of supe... Dislocation structures in the γ phase grains of Ti 45Al 10Nb specimens have been characterized after tensile tests at room temperature. In addition to ordinary dislocations with b=1/2〈110], a certain density of superdislocations and faulted dipoles were observed, which are rarely present in the conventional two phase TiAl base alloys of normal impurity. This difference was attributed to the solution of high Nb in the γ phase, which may increase the CRSS for 〈110] ordinary slip. 展开更多
关键词 TI 45Al 10nb ALLOY deformation TENSILE tests DISLOCATION SLIP
下载PDF
固溶处理对Ti-14Al-10Nb合金组织及摩擦磨损性能的影响
9
作者 秦春 段昊灼 李伟 《金属热处理》 CAS CSCD 北大核心 2023年第12期56-59,共4页
研究了固溶处理对Ti-14Al-10Nb合金显微组织和摩擦磨损性能的影响规律。结果表明,锻态Ti-14Al-10Nb合金的显微组织由α_(2)相和β相组成,其中α_(2)相呈细小、弯曲的棒状形态。固溶温度的升高促进了显微组织中α_(2)相向β相的转变,导致... 研究了固溶处理对Ti-14Al-10Nb合金显微组织和摩擦磨损性能的影响规律。结果表明,锻态Ti-14Al-10Nb合金的显微组织由α_(2)相和β相组成,其中α_(2)相呈细小、弯曲的棒状形态。固溶温度的升高促进了显微组织中α_(2)相向β相的转变,导致α_(2)相的含量减少,同时棒状α_(2)相的形态逐渐粗化。锻态Ti-14Al-10Nb合金的摩擦因数及磨损量均小于经固溶处理后试样,表明锻态时合金的耐磨性较好;而且随着固溶温度的升高,α_(2)相溶解程度增加,合金耐磨性随之下降。Ti-14Al-10Nb合金主要磨损形式为磨粒磨损和氧化磨损。 展开更多
关键词 ti-14al-10nb合金 热处理 显微组织 摩擦磨损性能
原文传递
SPS烧结温度对Ti-45Al-8Nb合金组织及力学性能的影响 被引量:5
10
作者 董多 苏勇君 +3 位作者 朱冬冬 周兆忠 倪成员 贺庆 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2019年第12期4101-4105,共5页
以雾化法制备的Ti-45Al-8Nb(at%)预合金粉末为原料,采用放电等离子烧结工艺技术(SPS)制备了Ti-45Al-8Nb合金,研究了不同烧结温度对合金显微组织及力学性能的影响规律。结果表明,在烧结温度范围内(1250、1275、1300℃),合金均为全片层组... 以雾化法制备的Ti-45Al-8Nb(at%)预合金粉末为原料,采用放电等离子烧结工艺技术(SPS)制备了Ti-45Al-8Nb合金,研究了不同烧结温度对合金显微组织及力学性能的影响规律。结果表明,在烧结温度范围内(1250、1275、1300℃),合金均为全片层组织,并具有高抗压强度和压缩率。随着烧结温度的提高,合金中γ相含量升高,α2相含量下降。1250℃放电等离子烧结时,合金中并未出现B2相,随着烧结温度的升高,合金中的B2相主要由晶界析出,并呈增多的趋势。分析表明,主要是由于放电等离子烧结过程中使得粉末间产生局部高温形成液相,其后的快速凝固导致高温β相来不及转变而形成的B2相残留。合金总体表现出随着烧结温度的升高,合金的强度和塑性性能下降的趋势。SPS烧结温度为1250℃时,抗压强度和压缩率最佳,分别为2084.20 MPa和33.10%。合金SPS烧结温度为1250和1275℃时,断裂模式主要为沿片层断裂和穿片层断裂混合方式。SPS烧结温度为1300℃时,断裂则主要以沿片层断裂为主。 展开更多
关键词 放电等离子烧结 ti-45al-8nb 预合金粉末 组织
原文传递
高Nb-TiAl合金激光焊接头组织与力学性能研究 被引量:6
11
作者 冯新 丁贤飞 +5 位作者 李潇楠 余稳 林均品 张国庆 刘娜 南海 《焊接技术》 2019年第5期36-39,7,共5页
采用金相显微镜、扫描电镜、电子探针、 X射线衍射等方法研究了Ti-45Al-8.5Nb合金激光焊接头组织、化学成分和组成相的演变规律,并利用显微硬度仪对焊接接头区的显微硬度分布进行了测试。结果表明,焊接接头与基体组成相相同,均为α2,γ... 采用金相显微镜、扫描电镜、电子探针、 X射线衍射等方法研究了Ti-45Al-8.5Nb合金激光焊接头组织、化学成分和组成相的演变规律,并利用显微硬度仪对焊接接头区的显微硬度分布进行了测试。结果表明,焊接接头与基体组成相相同,均为α2,γ和B2相;焊缝中心区组织为二次熔融的枝晶组织,α2相含量高于基体的,显微硬度高于热影响区和基体的。 展开更多
关键词 ti-45al-8.5nb合金 激光焊接 微观组织 显微硬度
下载PDF
Y对Ti-45Al-6Nb合金组织结构和高温氧化性能的影响 被引量:3
12
作者 黄波 李轩 +2 位作者 谢小青 谢文玲 柳忠彬 《特种铸造及有色合金》 CAS 北大核心 2020年第8期925-928,共4页
研究了Y对电弧熔炼Ti-45Al-6Nb合金组织结构和高温氧化性能的影响。结果表明,不同Y含量的Ti-45Al-6Nb合金均主要由γ+α2片层组织、B2析出相和少量Y2O3组成,微量Y对合金的相组成没有明显的影响,但能够显著细化合金的α2+γ片层组织。高... 研究了Y对电弧熔炼Ti-45Al-6Nb合金组织结构和高温氧化性能的影响。结果表明,不同Y含量的Ti-45Al-6Nb合金均主要由γ+α2片层组织、B2析出相和少量Y2O3组成,微量Y对合金的相组成没有明显的影响,但能够显著细化合金的α2+γ片层组织。高温氧化结果表明,Y能够明显改善Ti-45Al-6Nb合金的高温抗氧化性能,且Y含量为0.3%时效果更优:Ti-45Al-6Nb-0.3Y合金在1000℃空气中的氧化速率为3.26×10^-2 mg^2/(cm4·h),分别是Y含量为0.1%和0.9%时合金氧化速率的41.3%和26.1%,较不含Y合金低约1个数量级。 展开更多
关键词 ti-45al-6nb合金 Y改性 高温氧化 氧化膜 氧化动力学
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部