The effect of rolling temperature on both two-and single-phase regions and annealing in a temperature range of 700–950°C on the microstructure and mechanical properties of Ti-5 Al-4 V-2 Fe-1 Mo alloy was investi...The effect of rolling temperature on both two-and single-phase regions and annealing in a temperature range of 700–950°C on the microstructure and mechanical properties of Ti-5 Al-4 V-2 Fe-1 Mo alloy was investigated. The results indicated that the best balance of strength and ductility is obtained by rolling in the two-phase region due to the globularization of the alpha phase and increase in its volume fraction. After rolling in the two-phase region, the ductility of the specimens annealed at 700 to 800°C increased because of the finer size and globularized alpha phase, while the reduction in strength was attributed to a decrease in the alpha phase volume fraction. However, at 950°C, the strength increased and ductility dropped by the formation of acicular alpha phase due to an increase in the phase boundary area. Annealing and aging after rolling in the beta-phase region increased the strength and decreased the ductility, which is attributed to the formation of a secondary alpha phase. A combination of favorable yield strength(1113 MPa) and elongation(13.3%) was obtained through rolling at 850°C followed by annealing at 750°C and aging at 570°C.展开更多
A new metastable beta titanium alloy of Ti-Al-Mo-V-Cr-Fe-Zr-Sn system was designed and named Ti-B20. In order to investigate the aging properties and microstructures of the new alloy subjected to different solution tr...A new metastable beta titanium alloy of Ti-Al-Mo-V-Cr-Fe-Zr-Sn system was designed and named Ti-B20. In order to investigate the aging properties and microstructures of the new alloy subjected to different solution treatments, the tensile and Vickers hardness tests were carried out and the optical microscope and scanning electron microscope analysis were performed. The results show that the new alloy displays rapid aging response, high age strengthening effect and fine deposition. In addition, beta solution results in ultra high age hardening effect with low tensile ductility, whereas excellent combination of aging strength and ductility can be obtained after solution treated below beta transus temperature.展开更多
Additively manufactured Ti-6 Al-4 V lattice structures have found important niche applications. However, they often show insufficient compressive ductility or insufficient structural integrity. In this study,a batch o...Additively manufactured Ti-6 Al-4 V lattice structures have found important niche applications. However, they often show insufficient compressive ductility or insufficient structural integrity. In this study,a batch of 45 octahedral Ti-6 Al-4 V lattice structures was manufactured in three different strut diameters(0.5, 1.0, 1.5 mm) by selective electron beam melting(SEBM). The influence of post-SEBM annealing on the compressive deformation characteristics of the lattice structure was investigated. The as-built Ti-6 Al-4 V lattices fragmented when the compressive strain reached 13%–23% depending on strut diameter.Annealing at 950?C(β transus temperature: 995?C) only slightly improved the compressive ductility of the lattice structures. However, annealing at 1050?C(β-annealing) fundamentally changed the compressive deformation mode of the lattice structures. The resultant compressive stress-strain curve was featured by a long smooth plateau and no facture occurred even after significant densification of the lattice structure had taken place(>50% of compressive strain).展开更多
基金supported by the National Basic Research Program of China(2013CB933200)the High Technology Research and Development Program of China(2012AA062703)+1 种基金China National Funds for Distinguished Young Scientists(51225202)the Opening Projects of State Key Laboratory of Heavy Oil Processing(SKLOP201402003)~~
基金Metallic Materials Research Center of Malek Ashatr University of Technology,Iran,for useful technical help and financial supports for this research
文摘The effect of rolling temperature on both two-and single-phase regions and annealing in a temperature range of 700–950°C on the microstructure and mechanical properties of Ti-5 Al-4 V-2 Fe-1 Mo alloy was investigated. The results indicated that the best balance of strength and ductility is obtained by rolling in the two-phase region due to the globularization of the alpha phase and increase in its volume fraction. After rolling in the two-phase region, the ductility of the specimens annealed at 700 to 800°C increased because of the finer size and globularized alpha phase, while the reduction in strength was attributed to a decrease in the alpha phase volume fraction. However, at 950°C, the strength increased and ductility dropped by the formation of acicular alpha phase due to an increase in the phase boundary area. Annealing and aging after rolling in the beta-phase region increased the strength and decreased the ductility, which is attributed to the formation of a secondary alpha phase. A combination of favorable yield strength(1113 MPa) and elongation(13.3%) was obtained through rolling at 850°C followed by annealing at 750°C and aging at 570°C.
文摘A new metastable beta titanium alloy of Ti-Al-Mo-V-Cr-Fe-Zr-Sn system was designed and named Ti-B20. In order to investigate the aging properties and microstructures of the new alloy subjected to different solution treatments, the tensile and Vickers hardness tests were carried out and the optical microscope and scanning electron microscope analysis were performed. The results show that the new alloy displays rapid aging response, high age strengthening effect and fine deposition. In addition, beta solution results in ultra high age hardening effect with low tensile ductility, whereas excellent combination of aging strength and ductility can be obtained after solution treated below beta transus temperature.
基金supported by the National Key Research and Development Project (Grant No. 2016 YFB 1101403)the National Key Foundation for Exploring Scientific Instrument of China (Grant No. 2016 YQ 51627805)
文摘Additively manufactured Ti-6 Al-4 V lattice structures have found important niche applications. However, they often show insufficient compressive ductility or insufficient structural integrity. In this study,a batch of 45 octahedral Ti-6 Al-4 V lattice structures was manufactured in three different strut diameters(0.5, 1.0, 1.5 mm) by selective electron beam melting(SEBM). The influence of post-SEBM annealing on the compressive deformation characteristics of the lattice structure was investigated. The as-built Ti-6 Al-4 V lattices fragmented when the compressive strain reached 13%–23% depending on strut diameter.Annealing at 950?C(β transus temperature: 995?C) only slightly improved the compressive ductility of the lattice structures. However, annealing at 1050?C(β-annealing) fundamentally changed the compressive deformation mode of the lattice structures. The resultant compressive stress-strain curve was featured by a long smooth plateau and no facture occurred even after significant densification of the lattice structure had taken place(>50% of compressive strain).
