Effects of Plasma Nitriding on Microstructure and Tribological Properties of CoCrMo Alloy Implant Materials

Medical forged CoCrMo alloy was treated by plasma nitriding process.The microstructures were characterized by 3Dprofiler,SEM and XRD.The tribological properties were investigated under lubrication of 25% bovine serum solution.Resultsshow that plasma nitriding is a promising process to produce thick,hard,and more wear resistant layers on the surface of CoCrMoalloy.All nitrided samples showed an important increase in the surface hardness due to the formation of harder CrN andCrN phases with compact nano-crystalline structures.The typical hardness values of HVincreased almost two times thanuntreated one.Under bovine serum lubrication,at low nitriding temperature the Coefficient of Friction (COF) of nitrided samplewas lower than that of untreated sample,but at high nitriding temperature the COF was almost the same as the untreated one.Compared with the untreated sample,the nitrided samples showed lower wear rates and higher wear resistance under differentnitriding temperatures.The adhesive wear is the main mechanism for untreated CoCrMo alloy and the wear mechanisms ofnitrided ones are the fatigue wear and slight adhesive wear.It is concluded that the improvement of wear resistance is ascribed tothe hard nitride formation of CrN and CrN phases at the nitrided surfaces.

Examination of Plasma Nitriding Microstructure with Addition of Rare Earths

Medium-carbon alloy steel was plasma nitrided with rare earths La, Ce and Nd into the nitriding chamber respectively. The nitriding layer microstructures with and without rare earths were compared using optical microscope,normal SEM and high resolution SEM, as well as TEM. It was found that the extent of the influence on plasma nitriding varies with different contents of rare earth. The effect of plasma nitriding is benefit from adding of Ce or Nd. The formation of hard and brittle phase Fe_(2-3)N can be prevented and the butterfly-like structure can be improved by adding Ce or Nd. However, pure La may prevent the diffusion of nitrogen and the formation of iron nitride, and reduce the depth of diffusion layer.

Diffusion of lanthanum in nanocrystallized surface layer during plasma rare earth nitriding of 3J33B steel

Plasma rare earth nitriding of nanocrystallized surface layer of 3J33B steel at 350 and 410℃ for different time was studied. The microstructure observation and X-ray diffraction（XRD） analysis show that the nitriding layer consists of compound layer （γ′-Fe4N） and diffusion layer （α-Fe）. Lanthanum content profiles in nanocrystallized surface layer were measured using glow discharge spectometry（GDS）. The results show that lanthanum can diffuse into the surface layer of the steel to a large depth. Based on the experimental results mentioned above, the diffusion coefficients and activation energy of lanthanum in γ′ phase are calculated to be 1.03×10 -15 cm2/s （350℃）, 1.75×10 -15 cm2/s （410℃） and 31.313kJ/mol, respectively.

Comprehensive analysis of pulsed plasma nitriding preconditions on the fatigue behavior of AISI 304 austenitic stainless steel

This study aims to draw an exact boundary for microstructural and mechanical behaviors in terms of pulsed plasma nitriding conditions.The pulsed plasma nitriding treatment was applied to AISI 304 austenitic stainless steel at different temperatures and durations.Results reveal that nitriding depth increased as process temperature and duration increase.The nitriding depth remarkably increased at 475℃for 8 h and at 550℃for 4 h.An austenite structure was transformed into a metastable nitrogen-oversaturated body-centered tetragonal expanded austenite(S-phase)during low-temperature plasma nitriding.The S-phase was converted to CrN precipitation at 475℃for 8 h and at 550℃for 4 h.Surface hardness and fatigue limit increased through plasma nitriding regardless of process conditions.The best surface hardness and fatigue limit were obtained at 550℃for 4 h because of the occurrence of CrN precipitation.

IMPROVEMENT OF MECHANICAL PROPERTIES OF MARTENSITIC STAINLESS STEEL BY PLASMA NITRIDING AT LOW TEMPERATURE

A series of experiments were carried out to study the influence of low temperature plasma nitriding on the mechanical properties of AISI 420 martensitic stainless steel. Plasma nitriding experiments were carried out for 15 h at 350℃ by means of DC- pulsed plasma in 25%N2＋ 75%H2 atmosphere. The microstructure, phase composition, and residual stresses profiles of the nitrided layers were determined by optical microscopy and X-ray diffraction. The microhardness profiles of the nitridied surfaces were also studied. The fatigue life, sliding wear, and erosion wear loss of the untreated specimens and plasma nitriding specimens were determined on the basis of a rotating bending fatigue tester, a ball-on-disc wear tester, and a solid particle erosion tester. The results show that the 350℃ nitrided surface is dominated by c-Fe3N and ON, which is supersaturated nitrogen solid solution. They have high hardness and chemical stabilities. So the low temperature plasma nitriding not only increases the surface hardness values but also improves the wear and erosion resistance. In addition, the fatigue limit of AISI 420 steel can also be improved by plasma nitriding at 350℃ because plasma nitriding produces residual compressive stress inside the modified layer.

Bacteria Adherence Properties of Nitrided Layer on Ti6Al4V by the Plasma Nitriding Technique

The nitrided layer on Ti6A14V substrate was prepared by the plasma nitriding technique. The sample was characterized by X-ray diffraction （XRD）, glow discharge optical emission spectroscopy （GDOES）, X-ray photoelectron spectroscopy （XPS）, and rough-meter. X- ray diffraction analysis reveals that TiN, Ti2N and Ti phase exist in the nitrided layer subsurface. GDOES analysis shows the thickness of the nitrided layer is about 3 ~tm. XPS analysis shows that there is higher N, lower A1 and lower V in the nitrided layer surface than in the Ti6A14V surface. Rough-meter analysis results show the roughness of the nitrided layer is greater than that of Ti6A14V alloy base. The bacteria adherence property of the nitrided layer on Ti6A14V substrate on the Streptococcus mutans was investigated and compared with that of Ti6A14V alloy by fluorescence microscope. It shows that the nitrided layer inhibits the bacteria adherence.

Glow Discharge Plasma Nitriding of AISI 304 Stainless Steel

Glow discharge plasma nitriding of AISI 304 austenitic stainless steel has been carried out for different processing time under optimum discharge conditions established by spectroscopic analysis. The treated samples were analysed by X-ray diffraction （XRD） to explore the changes induced in the crystallographic structure. The XRD pattern confirmed the formation of an expanded austenite phase （TN） owing to incorporation of nitrogen as an interstitial solid solution in the iron lattice. A Vickers microhardness tester was used to evaluate the surface hardness as a function of indentation depth （μm）. The results showed clear evidence of surface changes with substantial increase in surface hardness.

The Study of Plasma Nitriding of AISI304 Stainless Steel

This paper presents results on the plasma nitriding of AISI 304 stainless steel at different temperatures in NH 3 gas. The working pressure was 100-200 Pa and the discharge voltage was 700-800V. The phase of nitrided layer formed on the surface was confirmed by X-ray diffraction. The hardness of the samples was measured by using a Vickers microhardness tester with the load of 50g. After nitriding at about 400 °C for two hours a nitrided layer consisting of single YN phase with thickness of 5um was obtained. Microhardness measurements showed significant increase in the hardness from 240 HV (for untreated samples) up to 950 HV (for nitrided samples at temperature of 420°C). The phase composition, the thickness, the microstructure and the surface topography of the nitrided layer as well as its properties depend essentially on the process parameters.

Microstructure and Wear Behavior of Ti-6Al-4V Treated by Plasma Zr-alloying and Plasma Nitriding

A duplex treatment of plasma Zr-alloying and plasma nitriding was used to improve the tribological properties of Ti-6Al-4V. The microstructure of the Zr-N composite（alloyed） layer formed on Ti-6Al-4V and its hardness, friction and wear properties were investigated by using OM, SEM, GDOES, EDS, microhardness tester as well as ball-on-disk tribometer. The results of microstructural analysis show that the alloyed layer is compact and uniform and is mainly composed of ZrN, TiN_（0.3） and AlN. A very tiny adhesive and slight oxidation wear is the primary wear mechanism for the modified Ti-6Al-4V. The tribological property is improved significantly after the duplex treatment. The good combination of antifriction and wear resistance for modified Ti-6Al-4V is mainly attributed to the higher surface hardness of metal nitrides formed on the surface and enhanced supporting of the Zr-diffusing layer.

Experimental and numerical study on plasma nitriding of AISI P20 mold steel

In this study, plasma nitriding was used to fabricate a hard protective layer on AISI P20 steel, at three process temperatures（450℃, 500℃, and 550℃） and over a range of time periods（2.5, 5, 7.5, and 10 h）, and at a fixed gas N2：H2 ratio of 75vol%：25vol%. The morphology of samples was studied using optical microscopy and scanning electron microscopy, and the formed phase of each sample was determined by X-ray diffraction. The elemental depth profile was measured by energy dispersive X-ray spectroscopy, wavelength dispersive spectroscopy, and glow dispersive spectroscopy. The hardness profile of the samples was identified, and the microhardness profile from the surface to the sample center was recorded. The results show that ε-nitride is the dominant species after carrying out plasma nitriding in all strategies and that the plasma nitriding process improves the hardness up to more than three times. It is found that as the time and temperature of the process increase, the hardness and hardness depth of the diffusion zone considerably increase. Furthermore, artificial neural networks were used to predict the effects of operational parameters on the mechanical properties of plastic mold steel. The plasma temperature, running time of imposition, and target distance to the sample surface were all used as network inputs; Vickers hardness measurements were given as the output of the model. The model accurately reproduced the experimental outcomes under different operational conditions; therefore, it can be used in the effective simulation of the plasma nitriding process in AISI P20 steel.

Study of the Active Screen Plasma Nitriding

Active screen plasma nitriding (ASPN) is a novel nitriding process, which overcomes many of the practical problems associated with the conventional DC plasma nitriding (DCPN). Experimental results showed that the metallurgical characteristics and hardening effect of 722M24 steel nitrided by ASPN at both floating potential and anodic (zero) potential were similar to those nitrided by DCPN. XRD and high-resolution SEM analysis indicated that iron nitride particles with sizes in sub-micron scale were deposited on the specimen surface in AS plasma nitriding. These indicate that the neutral iron nitride particles, which are sputtered from the active screen and transferred through plasma to specimen surface, are considered to be the dominant nitrogen carrier in ASPN. The OES results show that NH could not be a critical species in plasma nitriding.

The Phenomenon of High Hardness Values on the S-Phase Layer of Austenitic Stainless Steel via Screen Plasma Nitriding Process

The purpose of this study is to improve the surface properties of austenitic stainless steel using the double-folded electrode screen plasma nitriding (SPN) process. In general, the S-phase is well-known for its excellent properties such as improved hardness and wear resistance along with sustained corrosion resistance. The concentrated nitrogen via SPN process was injected to form S-phase with time at 713 K. This study was carried out under the conditions of 44 at% of nitrogen injection, which was higher than 25 at% known as the condition of no precipitation of S-phase formed by the SPN process, and 20 K higher than the maximum temperature without precipitation phase. The hardness analysis of stainless steel sample treated by the SPN process at 713 K showed a much higher value than the typical nitriding hardness at a depth of lower nitrogen than the maximum nitrogen concentration. The SPN 20 hr treated specimen showed the average value of 2339 HV while 40 hr showed the average value of 2215 HV. The result is attributed to the concentrated nitrogen formed in the SPN process reacting with the alloying elements contained in the base material to form fine precipitates, thus producing a synergy effect of the extreme hardening effect;that is, the movement of precipitates and dislocations due to the GP-zone (Guinier-Preston zone).

Precipitate-Accommodated Plasma Nitriding for Aluminum Alloys

Reliable surface treatment has been explored to improve the strength and wear resistance of aluminum alloy parts in automotives. Long duration time as well as long pre-sputtering time are required for plasma nitriding of aluminum or its alloys only with the thickness of a few micrometers. New plasma inner nitriding is proposed to realize the fast-rate nitriding of aluminum alloys. Al-6Cu alloy is employed as a targeting material in order to demonstrate the effectiveness of this plasma nitriding. Mechanism of fast-rate nitriding process is discussed with consideration of the role of Al2Cu precipitates.

Characterization and Tribological Performance of Titanium Nitrides in Situ Grown on Ti6Al4V Alloy by Glow Discharge Plasma Nitriding

Titanium(Ti)nitrides were in situ grown on Ti6Al4V alloy(TA)using a glow discharge plasma nitriding(GDPN).The morphology,chemical composition,phase and mechanical property of the obtained nitrided TA were analyzed using a scanning electron microscope(SEM),energy dispersive spectroscope(EDS),X-ray diffraction(XRD),and nanoindentation tester,respectively.The tribological performances of un-nitrided and nitrided TAs were evaluated using a ball-on-plate wear tester,and the wear mechanism was also discussed in detail.The results show that the nitrided layer with the compound and diffusion layers is formed on the nitrided TA,which is composed of δ-TiN and a-Ti phases.The nanohardness and elastic modulus of nitrided TA are 6.05 and 143.13 GPa,respectively,higher than those of un-nitrided TA.The friction reduction and anti-wear performances of nitrided TA are better than those of un-nitrided TA,and the wear mechanism is primary abrasive wear,accompanying with adhesive wear,which is attributed to the formation of Ti nitrides with the high nanohardness and elastic modulus.

Plasma Nitriding of Austenitic Stainless Steel with Severe Surface Deformation Layer

The dc glow discharge plasma nitriding of austenite stainless steel with severe surface deformation layer is used to produce much thicker surface modified layer. This kind of layers has useful properties such as a high surface hardness of about 1500 Hv 0.1 and high resistance to frictional wear. This paper presents the structures and properties of low temperature plasma nitrided austenitic stainless steel with severe surface deformation layer.

Plasma Nitriding of 722M24 Steel with Pure Lanthanum, Cerium and Neodymium as Sputter Sources

A series of experiments were carried out to investigate the influence of pure rare earth addition on the plasma nitriding response of low alloy steel. For this purpose, pure rare earth metals (La, Ce and Nd) were put into the plasma nitriding furnace as sputter sources during nitriding of 722M24 steel. a variety of experimental and analytical techniques were employed to evaluate the structures and hardening response of the nitrided lavers which included metallography for structural examination, glow discharge spectrometry and secondary ion mass spectrometry for chemical composition profile analysis, X-ray diffraction for phase identification and microhardness testing for hardness profile measurements. The results show that the incorporation of rare earth metals in the glow discharge. during plasma nitriding not only influences the discharge characteristics but also results in the deposition of rare earth atoms and their compounds onto the specimen surface. These significantly affect the response of the investigated steel to plasma nitriding. The extent of the influence on plasma nitriding varies with different rare earth metals.

Plasma-nitriding of tantalum at relatively low temperature

The combined quadratic orthogonal regression method of experiment design wasemployed to explore the effects of process parameters of plasma nitriding of tantalum such as totalpressure, temperature and original hydrogen molar fraction on the hardness, roughness and structureof nitriding surfaces. The regression equations of hardness, roughness and structure were givenaccording to the results of regression and statistic analysis. And the diffusion activation energyof nitrogen in tantalum on plasma nitriding conditions was calculated according to the experimentaldata of hardness of plasma-nitriding of tantalum vs time and temperature. The diffusion activationenergy calculated belongs to (155.49 +- 10.51) kJ/mol (783-983 K).

Improvement in Corrosion Resistance of Anchor Steel by Low Temperature Plasma Nitriding

Plasma nitriding was used to improve the corrosion performance of anchor steel. The microstructure, phase constitution, microhardness and corrosion resistance of the nitrided layer were systematically studied. The results show that the nitrided layer is continuous and dense, and consists of Fe4N and Fe3N in the outmost surface. The microhardness of the nitrided sample is improved because of the formation of nitrides in the outer side continuous layer and the inner parts. The nitrided layer on the surface of anchor steel can effectively improve the corrosion resistance of the anchor steel.

GROWTH PROCESS OF LOW-TEMPERATURE PLASMA-NITRIDING LAYER ON AUSTENITIC STAINLESS STEEL

The growth process of low-temperaturs plasma-nitriding layer was investigated by scan-ning electron microscopy (SEM) and X-ray diffraction (XRD). The layer is composedof expanded fcc phase (γN), whose lattice parameter of the layer increases with processtime resulting from increasing the nitrogen content. The layer hardness increases grad-ually with nitrogen content. The high slip band density on the layer surface observedin situ by SEM shows that the surface yield occurs when supersaturated nitrogen con-tent in the layer attains to some value, which is also responsible for the increase inlayer hardness.

Effect of the Compound Layer of Plasma Nitriding on Thermal Fatigue Behavior of 4Cr5MoSiV1 Die Steel

With the Uddeholm self restricted method, the effect of compound layer of plasma nitriding on thermal fatigue behavior of 4Cr5MoSiV1 steel was studied by the way of adding Ar during plasma nitriding to remove the compound layer. The results show that the compound layer of plasma nitriding can delay the nucleation of heat cracks and hold back the propagation of heat cracks from surface to substrate because of its high hardness and strength. On the other land, the heat checking expands faster with the compound layer on the surface than that without it. After 3000 cycles of thermal fatigue test, both heat cracks with the compound layer are wider than the another without compound layer and the number of heat cracks of the former is more from the view of cross section.