Effect of Fe_2P in LiFePO_4/Fe_2P composite on electrochemical properties synthesized by MA and control of heat condition

In order to control the size and distribution of the high conductive Fe2P in LiFePO4/Fe2P composite, two different cooling rates (Fast: 15 ℃·min-1, Slow: 2 ℃·min-1) were employed after mechanical alloying. The discharge capacity of the fast cooled was 83 mAh·g-1 and the slow cooled 121 mAh·g-1. The particle size of the synthesized powder was examined by transmission electron microscopy and distribution of Fe2P was characterized using scanning electron microscopy (SEM). In addition, two-step heat treatment was carried out for better distribution of Fe2P. X-ray diffraction (XRD) and Rietveld refinement reveal that LiFePO4/Fe2P composite consists of 95.77% LiFePO4 and 4.33% of Fe2P.

Electrochemical performance of LiFePO_4/(C+Fe_2P) composite cathode material synthesized by sol-gel method

A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical performance of the composite cathode material were investigated by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical tests. The Fe2P content, morphology and electrochemical performance of LiFePOa/（C＋Fe2P） composite depend on the calcination temperature. The optimized LiFePO4/（C＋FeeP） composite is prepared at 650 ~C and the optimized composite exhibits sphere-like morphology with porous structure and Fe2P content of about 3.2% （mass fraction）. The discharge capacity of the optimized LiFePO4/（C＋FeRP） at 0.1C is 156 and 161 mA.h/g at 25 and 55 ℃, respectively, and the corresponding capacity retentions are 96% after 30 cycles; while the capacity at 1C is 142 and 149 mA.h/g at 25 and 55 ℃, respectively, and the capacity still remains 135 and 142 mA-h/g after 30 cycles at 25 and 55℃, respectively.

原位TiB_(2(p))/Fe复合材料的制备及其显微组织

利用Fe Ti B熔体反应制备了TiB2颗粒增强铁基复合材料,研究了该材料的显微组织。热力学分析表明,Fe Ti B熔体具有反应生成TiB2的可能性。试验结果表明,TiB2颗粒均匀分布于α Fe晶粒中,晶内TiB2粒子平均间距大于晶界。TiB2粒子尺寸大多为1～6μm,形状大多为接近等轴的多面体。

Fabrication and thermo-physical properties of TiB_(2p)/Cu composites for electronic packaging applications

TiB_(2p)/Cu composites with high reinforcement content(φ_(p)=50%,58%and 65%)for electronic packaging applications were fabricated by squeeze casting technology.The microstructures and thermo-physical properties of the TiB_(2p)/Cu composites were investigated.The results show that TiB2 particles are homogeneous and distribute uniformly,and the TiB2-Cu interfaces are clean and free-from interfacial reaction products and amorphous layers,the densifications of the TiB_(2p)/Cu composites are higher than 98.2%. The mean linear coefficients of thermal expansion at 20-100℃for TiB_(2p)/Cu composites range from 8.3×10^(-6)to 10.8×10^(-6)/K and decrease with increasing volume fraction of TiB2.The experimental coefficients of thermal expansion agree well with the predicted values based on Turner’s model.The thermal conductivities of TiB_(2p)/Cu composites range from 167.3 to 215.4 W/(m·K),decreasing with increasing volume fraction TiB2.