The study of the chlorite coatings always attracts scholars in China and other countries because the chlorite coatings play an important role in the preservation of residual primary pores in sandstone reservoirs.At pr...The study of the chlorite coatings always attracts scholars in China and other countries because the chlorite coatings play an important role in the preservation of residual primary pores in sandstone reservoirs.At present,the study of the origin and the controlling factors is relatively few.The occurrence,time of formation,genesis,controlling factors,and the mechanism of chlorite coatings inhibiting quartz overgrowths were studied in detail with thin section and SEM analysis.Samples were from the sandstone reservoirs of the T3x Group in the Baojie area,the transitional zone from the middle to the south of Sichuan Basin.The results indicate that the chlorite coatings on the walls of the pore spaces are oriented perpendicular to grain surfaces in the form of isopachous(even-thickness) grain-coating,while the chlorite coatings at the contacts between adjacent detrital grains are arranged with a preferred orientation tangential to the surface of detrital grains.The chlorite coatings were formed in the eogenetic stage.They were formed by recrystallization of Fe-rich clay films during the syndepositional period,and chlorite cements would be recrystallized after the coatings’ formation.The formation of chlorite coatings was mainly controlled by the depositional environment,provenance conditions,and diagenetic environment.The presence of chlorite coatings could result in the preservation of primary pores in deeply buried sandstone reservoirs by effectively inhibiting quartz overgrowths and the development of compaction and pressure solution.展开更多
A single Si_(1−x)C_(x)coating and compound coatings were deposited on Mg-3Sn matrix alloy by magnetron sputtering method.Compound coatings included Mg or Mg/AlTi intermediates between Mg-3Sn substrate and Si_(1−x)C_(x...A single Si_(1−x)C_(x)coating and compound coatings were deposited on Mg-3Sn matrix alloy by magnetron sputtering method.Compound coatings included Mg or Mg/AlTi intermediates between Mg-3Sn substrate and Si_(1−x)C_(x)coating.The thermal conductivity of the Mg-3Sn alloy after coating was enhanced at room temperature.The results showed that the Mg-3Sn alloy coated with Mg/AlTi/Si_(1−x)C_(x)displayed higher thermal conductivity,its thermal conductivity after corrosion was 90.1 W/(m K)and 108.4 W/(m K)at 25℃and 100℃,respectively.Meanwhile,it was revealed that the Mg/Si_(1−x)C_(x)and Mg/AlTi/Si_(1−x)C_(x)compound coatings had nobler Ecorr and much lower i_(corr),higher Rp,compared with the bare Mg-3Sn and Mg-3Sn/Si_(1−x)C_(x)system,and improved the corrosion resistance of the magnesium substrate.展开更多
Cerium conversion treatment was applied on magnesium coatings in a solution containing CeC13. The composition ot the cenum conversion layer on magnesium was investigated using X-ray photoelectron spectroscopy （XPS）,...Cerium conversion treatment was applied on magnesium coatings in a solution containing CeC13. The composition ot the cenum conversion layer on magnesium was investigated using X-ray photoelectron spectroscopy （XPS）, It was revealed that the composition predominately consisted of a three-valent state cerium compound with a relative abundance around 90%. Some of Ce^3＋ was oxidized to Ce^4＋. Electrochemical impedance spectroscopy results revealed that the total impedance of cerium-treated samples increased for a short immersion time in NaC1 solution before coating deteriorating. This deterioration was due to the coating porosity increasing and the breakdown of the conversion layer展开更多
Pure W and W-Cu-W trilayer coatings were deposited on an Fe substrate by d.c. magnetron sputtering. The α-β phase evolution, intragranular stress evolution in sputter-deposited W layer were investigated by x-ray dif...Pure W and W-Cu-W trilayer coatings were deposited on an Fe substrate by d.c. magnetron sputtering. The α-β phase evolution, intragranular stress evolution in sputter-deposited W layer were investigated by x-ray diffraction. They are directly related to the film microstructure, density and adhesion. Therefore, control of the film stress and phase component transition is essential for its applications. The phase component transition from β-W to α-W and intragranular stress evolution from tensile to compressive strongly depend on the deposition parameters and can be induced by lowering Ar pressure and rising target power. The compressively stressed films with α-W phase have a dense microstructure and high adhesion to Fe substrate.展开更多
基金supported by the Natural Science Key Project of Education Board in Sichuan province,China (No.07ZA139)
文摘The study of the chlorite coatings always attracts scholars in China and other countries because the chlorite coatings play an important role in the preservation of residual primary pores in sandstone reservoirs.At present,the study of the origin and the controlling factors is relatively few.The occurrence,time of formation,genesis,controlling factors,and the mechanism of chlorite coatings inhibiting quartz overgrowths were studied in detail with thin section and SEM analysis.Samples were from the sandstone reservoirs of the T3x Group in the Baojie area,the transitional zone from the middle to the south of Sichuan Basin.The results indicate that the chlorite coatings on the walls of the pore spaces are oriented perpendicular to grain surfaces in the form of isopachous(even-thickness) grain-coating,while the chlorite coatings at the contacts between adjacent detrital grains are arranged with a preferred orientation tangential to the surface of detrital grains.The chlorite coatings were formed in the eogenetic stage.They were formed by recrystallization of Fe-rich clay films during the syndepositional period,and chlorite cements would be recrystallized after the coatings’ formation.The formation of chlorite coatings was mainly controlled by the depositional environment,provenance conditions,and diagenetic environment.The presence of chlorite coatings could result in the preservation of primary pores in deeply buried sandstone reservoirs by effectively inhibiting quartz overgrowths and the development of compaction and pressure solution.
文摘A single Si_(1−x)C_(x)coating and compound coatings were deposited on Mg-3Sn matrix alloy by magnetron sputtering method.Compound coatings included Mg or Mg/AlTi intermediates between Mg-3Sn substrate and Si_(1−x)C_(x)coating.The thermal conductivity of the Mg-3Sn alloy after coating was enhanced at room temperature.The results showed that the Mg-3Sn alloy coated with Mg/AlTi/Si_(1−x)C_(x)displayed higher thermal conductivity,its thermal conductivity after corrosion was 90.1 W/(m K)and 108.4 W/(m K)at 25℃and 100℃,respectively.Meanwhile,it was revealed that the Mg/Si_(1−x)C_(x)and Mg/AlTi/Si_(1−x)C_(x)compound coatings had nobler Ecorr and much lower i_(corr),higher Rp,compared with the bare Mg-3Sn and Mg-3Sn/Si_(1−x)C_(x)system,and improved the corrosion resistance of the magnesium substrate.
文摘Cerium conversion treatment was applied on magnesium coatings in a solution containing CeC13. The composition ot the cenum conversion layer on magnesium was investigated using X-ray photoelectron spectroscopy （XPS）, It was revealed that the composition predominately consisted of a three-valent state cerium compound with a relative abundance around 90%. Some of Ce^3＋ was oxidized to Ce^4＋. Electrochemical impedance spectroscopy results revealed that the total impedance of cerium-treated samples increased for a short immersion time in NaC1 solution before coating deteriorating. This deterioration was due to the coating porosity increasing and the breakdown of the conversion layer
文摘Pure W and W-Cu-W trilayer coatings were deposited on an Fe substrate by d.c. magnetron sputtering. The α-β phase evolution, intragranular stress evolution in sputter-deposited W layer were investigated by x-ray diffraction. They are directly related to the film microstructure, density and adhesion. Therefore, control of the film stress and phase component transition is essential for its applications. The phase component transition from β-W to α-W and intragranular stress evolution from tensile to compressive strongly depend on the deposition parameters and can be induced by lowering Ar pressure and rising target power. The compressively stressed films with α-W phase have a dense microstructure and high adhesion to Fe substrate.
