The simulation by the Monte Carlo method executed by the software PyPENELOPE proved effective to specify the particle propagation characteristics by calculating the absorption fractions, backscattering and transmissio...The simulation by the Monte Carlo method executed by the software PyPENELOPE proved effective to specify the particle propagation characteristics by calculating the absorption fractions, backscattering and transmission of electrons and secondary photons under the incidence of 0.5 to 20 KeV range of primary electrons. More than 99.9% of the primary electrons were transmitted in the 125 nm thick MgO/TiO<sub>2</sub> material at 20 KeV. This occurred because several interactions took place in the transmitted primary irradiation such as characteristic, fluorescence, and bremsstrahlung produced when of the occupation of the KL3, KL2, KM3, and KM2 shell and sub-shell of titanium and magnesium which are the elements with a high atomic number in the material. The transmission particle characteristic of this material is therefore an indicator capable of improving the electrical performance and properties of the sensor.展开更多
This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting co...This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.展开更多
Due to its importance in hydrogen production during the photolysis process of aqueous suspensions process, mixed TiO2/V2O5 metal-oxide semiconductors were prepared and subjected to crystal structure investigation usin...Due to its importance in hydrogen production during the photolysis process of aqueous suspensions process, mixed TiO2/V2O5 metal-oxide semiconductors were prepared and subjected to crystal structure investigation using X-ray technique. The photoelectrochemical behavior of these TiO2/V2O5 was investigated by photolysis of aqueous suspensions of these oxides containing [Fe(CN)6]4-. X-ray diffraction analysis indicated that the TiO2 crystallites grow in the (1 0 1) direction, while The V2O5 crystallites seem to be growing in the (4 2 0) direction, with increasing concentration of V2O5. Photolysis studies show that photochemical activities that maintained the [Fe(CN)6]4/[Fe(CN)6]3- redox reversibility increased by increasing V2O5 up to 50% and then decreased at greater percentages. Aqueous nano systems used in these studies retained their stability as indicated by the reproducibility of their photo-catalytic activities.展开更多
A series of nanometer TiO2 photocatalysts co-doped respectively with rare earth Er3+-Ce3+ and La3+-Fe3+ were prepared by sol-gel method,and the photocatalytic activity under ultra-violet light was evaluated by photoca...A series of nanometer TiO2 photocatalysts co-doped respectively with rare earth Er3+-Ce3+ and La3+-Fe3+ were prepared by sol-gel method,and the photocatalytic activity under ultra-violet light was evaluated by photocatalytic degradation of methyl blue.The crystallographic forms,particles size,and morphology were characterized by XRD and TEM.The results showed that the optimum heat temperature of co-doped TiO2 was 550 ℃,and the co-doped TiO2 kept anatase.The anatase crystal had the average size of 20 nm.The co-doping caused red-shift of the UV-Vis absorption spectra and enhanced the absorption of light.Compared with the spectrum of pure TiO2 photocatalysts,the red-shift of Er3+-Ce3+ co-doping and La3+-Fe3+ co-doping catalysts was 53 nm and 34 nm,respectively.Optimal co-doping amount for Er3+-Ce3+ was n(Er3+):n(TiO2)=0.1%,n(Ce3+):(TiO2)= 0.05% and La3+-Fe3+ was n(La3+):n(TiO2)=0.05%,n(Fe3+):(TiO2)=0.5%.Under the condition the photocatalysis properties of the samples can be enhanced.It was found that the catalytic activity correlated well with the ratio.The degradation rate of methyl blue examined at two hour of the reaction was 92.37%,and the better photocatalysis properties than the non-doped TiO2 were obtained.The co-doped photocatalyst on methyl blue degradation follows the apparent first-order kinetics.展开更多
TiO_(2)is the dominant and most widely researched photocatalyst for environmental remediation,however,the drawbacks,such as only responding to UV light(<5%of sunlight),low charge separation efficiency,and difficult...TiO_(2)is the dominant and most widely researched photocatalyst for environmental remediation,however,the drawbacks,such as only responding to UV light(<5%of sunlight),low charge separation efficiency,and difficulties in recycling,have severely hindered its practical application.Herein,we synthesized magnetically separable Fe_(3)O_(4)@MoS_(2)@mesoporous TiO_(2)(FMmT)photocatalysts via a simple,green,and template-free solvothermal method combined with ultrasonic hydrolysis.It is found that FMmT possesses a high specific surface area(55.09 m2·g−1),enhanced visible-light responsiveness(~521 nm),and remarkable photogenerated charge separation efficiency.In addition,the photocatalytic degradation efficiencies of FMmT for methylene blue(MB),rhodamine B(RhB),and tetracycline(TC)are 99.4%,98.5%,and 89.3%within 300 min,respectively.The corresponding degradation rates are 4.5,4.3,and 3.1 times higher than those of pure TiO_(2)separately.Owing to the high saturation magnetization(43.1 A·m^(2)·kg^(−1)),FMmT can achieve effective recycling with an applied magnetic field.The improved photocatalytic activity is closely related to the effective transport of photogenerated electrons by the active interlayer MoS_(2) and the electron–hole separation caused by the MoS_(2)@TiO_(2)heterojunction.Meanwhile,the excellent light-harvesting ability and abundant reactive sites of the mesoporous TiO_(2)shell further boost the photocatalytic efficiency of FMmT.This work provides a new approach and some experimental basis for the design and performance improvement of magnetic photocatalysts by innovatively incorporating MoS2 as the active interlayer and integrating it with a mesoporous shell.展开更多
Lithium metal anode is almost the ultimate choice for high-energy density rechargeable batteries, but its uneven electrochemical dissolution-deposition characteristics lead to poor cycle stability and lithium dendrite...Lithium metal anode is almost the ultimate choice for high-energy density rechargeable batteries, but its uneven electrochemical dissolution-deposition characteristics lead to poor cycle stability and lithium dendrites safety problems. The fundamental solution to the problems is to interfere electrodeposition process of lithium metal so that it can be carried out reversibly and stably. In this work, an inverse-opal structured TiO2membrane with a thickness of only ~1 μm is designed to regulate the electrodeposition behavior of lithium metal, in which the ordered channels homogenize mass transfer process, the anatase TiO_(2)walls of the ion channels reduce desolvation barrier of solvated lithium-ions, and the spherical cavities with a diameter of ~300 nm confine migration of the adsorbed lithium atoms during electrocrystallization to diminish overpotential of lithium. These systematic effects cover and essentially change the whole process of electrodeposition of lithium metal and eliminate the possibility of lithium dendrite formation. The as-obtained lithium metal electrode delivers a Coulombic efficiency of 99.86% in the 100th cycle, and maintains a low deposition overpotential of 0.01 V for 800 h.展开更多
Titanium dioxide (TiO<sub>2</sub>) doped with neodymium (Nd) and/or Gadolinium (Gd) rare-earth elements were fabricated into nanotubes via the hydrothermal method in a KOH solution and in-situ doping. Tita...Titanium dioxide (TiO<sub>2</sub>) doped with neodymium (Nd) and/or Gadolinium (Gd) rare-earth elements were fabricated into nanotubes via the hydrothermal method in a KOH solution and in-situ doping. Titanium dioxide nanotubes (TNTs) and in-situ Nd-doped and/or Gd-doped TNTs were characterized with transmission and scanning electron microscopy, energy-dispersive X-ray analysis, X-ray diffraction, Raman spectroscopy, and Fourier-transform infrared spectroscopy. Morphologies indicated a network of aggregated nanotubes. The phase and composition analyses revealed that the lanthanide TNTs had anatase phases with Nd and/or Gd nanoparticles in the TNT lattice. The nanoparticles were uniformly deposited on the surface because of hydroxyl groups on the TNT surfaces, resulting in a very high loading density. The outer diameter and the length of the TNTs increased with doping. The mechanisms for the formation of multiwall TNTs are discussed.展开更多
We report the SERS enhancements of Raman forbidden surface modes of TiO<sub>2</sub> in different sized TiO<sub>2</sub> crystals. This current study utilizes the relationship between the vibroni...We report the SERS enhancements of Raman forbidden surface modes of TiO<sub>2</sub> in different sized TiO<sub>2</sub> crystals. This current study utilizes the relationship between the vibronic coupling and the degree of charge-transfer to explain the differences of Surface Enhanced Raman Scattering (SERS) enhancements. Our study shows a direct correlation between the degree of charge-transfer and vibronic coupling. This relationship suggests that charge-transfer between the N-719 dye and TiO<sub>2</sub> due to vibronic coupling plays a fundamental role in SERS enhancements. Furthermore, this study shows a strong dependence of the enhancements of the N-719 dye molecular modes to that of the surface modes. This indicates that the mechanism that governs the enhancements of the surface modes in TiO<sub>2</sub> crystals most likely also dictates the enhancements of the N-719 dyes.展开更多
文摘The simulation by the Monte Carlo method executed by the software PyPENELOPE proved effective to specify the particle propagation characteristics by calculating the absorption fractions, backscattering and transmission of electrons and secondary photons under the incidence of 0.5 to 20 KeV range of primary electrons. More than 99.9% of the primary electrons were transmitted in the 125 nm thick MgO/TiO<sub>2</sub> material at 20 KeV. This occurred because several interactions took place in the transmitted primary irradiation such as characteristic, fluorescence, and bremsstrahlung produced when of the occupation of the KL3, KL2, KM3, and KM2 shell and sub-shell of titanium and magnesium which are the elements with a high atomic number in the material. The transmission particle characteristic of this material is therefore an indicator capable of improving the electrical performance and properties of the sensor.
文摘This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.
文摘Due to its importance in hydrogen production during the photolysis process of aqueous suspensions process, mixed TiO2/V2O5 metal-oxide semiconductors were prepared and subjected to crystal structure investigation using X-ray technique. The photoelectrochemical behavior of these TiO2/V2O5 was investigated by photolysis of aqueous suspensions of these oxides containing [Fe(CN)6]4-. X-ray diffraction analysis indicated that the TiO2 crystallites grow in the (1 0 1) direction, while The V2O5 crystallites seem to be growing in the (4 2 0) direction, with increasing concentration of V2O5. Photolysis studies show that photochemical activities that maintained the [Fe(CN)6]4/[Fe(CN)6]3- redox reversibility increased by increasing V2O5 up to 50% and then decreased at greater percentages. Aqueous nano systems used in these studies retained their stability as indicated by the reproducibility of their photo-catalytic activities.
基金Funded by the 11th Five-Year National Key Technology R&D Program(No.2008BAC41B00)
文摘A series of nanometer TiO2 photocatalysts co-doped respectively with rare earth Er3+-Ce3+ and La3+-Fe3+ were prepared by sol-gel method,and the photocatalytic activity under ultra-violet light was evaluated by photocatalytic degradation of methyl blue.The crystallographic forms,particles size,and morphology were characterized by XRD and TEM.The results showed that the optimum heat temperature of co-doped TiO2 was 550 ℃,and the co-doped TiO2 kept anatase.The anatase crystal had the average size of 20 nm.The co-doping caused red-shift of the UV-Vis absorption spectra and enhanced the absorption of light.Compared with the spectrum of pure TiO2 photocatalysts,the red-shift of Er3+-Ce3+ co-doping and La3+-Fe3+ co-doping catalysts was 53 nm and 34 nm,respectively.Optimal co-doping amount for Er3+-Ce3+ was n(Er3+):n(TiO2)=0.1%,n(Ce3+):(TiO2)= 0.05% and La3+-Fe3+ was n(La3+):n(TiO2)=0.05%,n(Fe3+):(TiO2)=0.5%.Under the condition the photocatalysis properties of the samples can be enhanced.It was found that the catalytic activity correlated well with the ratio.The degradation rate of methyl blue examined at two hour of the reaction was 92.37%,and the better photocatalysis properties than the non-doped TiO2 were obtained.The co-doped photocatalyst on methyl blue degradation follows the apparent first-order kinetics.
基金financially supported by the National Key R & D Projects (Nos. 2021YFC1910504, 2019YFC1907101, 2019YFC1907103, and 2017YFB0702304)the Key R & D Project in Ningxia Hui Autonomous Region, China (No. 2020BCE01001)+6 种基金the Key and Normal Projects National Natural Science Foundation of China (Nos. U2002212 and 51672024)the Xijiang Innovation and Entrepreneurship Team (No. 2017A0109004)the Fundamental Research Funds for the Central Universities (Nos. FRF-BD-20-24A, FRF-TP-20-031A1, FRF-IC-19-017Z, FRF-GF-19-032B, and 06500141)the Integration of Green Key Process Systems MIIT, Natural Science Foundation of Beijing Municipality (No. 2214073)the Guangdong Basic and Applied Research Foundation, China (No. 2020A1515110408)the Foshan Science and Technology Innovation Special Foundation, China (No. BK21BE002)the Postdoctor Research Foundation of Shunde Graduate School of University of Science and Technology Beijing (No. 2020BH004)
文摘TiO_(2)is the dominant and most widely researched photocatalyst for environmental remediation,however,the drawbacks,such as only responding to UV light(<5%of sunlight),low charge separation efficiency,and difficulties in recycling,have severely hindered its practical application.Herein,we synthesized magnetically separable Fe_(3)O_(4)@MoS_(2)@mesoporous TiO_(2)(FMmT)photocatalysts via a simple,green,and template-free solvothermal method combined with ultrasonic hydrolysis.It is found that FMmT possesses a high specific surface area(55.09 m2·g−1),enhanced visible-light responsiveness(~521 nm),and remarkable photogenerated charge separation efficiency.In addition,the photocatalytic degradation efficiencies of FMmT for methylene blue(MB),rhodamine B(RhB),and tetracycline(TC)are 99.4%,98.5%,and 89.3%within 300 min,respectively.The corresponding degradation rates are 4.5,4.3,and 3.1 times higher than those of pure TiO_(2)separately.Owing to the high saturation magnetization(43.1 A·m^(2)·kg^(−1)),FMmT can achieve effective recycling with an applied magnetic field.The improved photocatalytic activity is closely related to the effective transport of photogenerated electrons by the active interlayer MoS_(2) and the electron–hole separation caused by the MoS_(2)@TiO_(2)heterojunction.Meanwhile,the excellent light-harvesting ability and abundant reactive sites of the mesoporous TiO_(2)shell further boost the photocatalytic efficiency of FMmT.This work provides a new approach and some experimental basis for the design and performance improvement of magnetic photocatalysts by innovatively incorporating MoS2 as the active interlayer and integrating it with a mesoporous shell.
基金Financial supports from the National Key Research and Development Program (2016YFB0100200)National Natural Science Foundation of China (21935006)。
文摘Lithium metal anode is almost the ultimate choice for high-energy density rechargeable batteries, but its uneven electrochemical dissolution-deposition characteristics lead to poor cycle stability and lithium dendrites safety problems. The fundamental solution to the problems is to interfere electrodeposition process of lithium metal so that it can be carried out reversibly and stably. In this work, an inverse-opal structured TiO2membrane with a thickness of only ~1 μm is designed to regulate the electrodeposition behavior of lithium metal, in which the ordered channels homogenize mass transfer process, the anatase TiO_(2)walls of the ion channels reduce desolvation barrier of solvated lithium-ions, and the spherical cavities with a diameter of ~300 nm confine migration of the adsorbed lithium atoms during electrocrystallization to diminish overpotential of lithium. These systematic effects cover and essentially change the whole process of electrodeposition of lithium metal and eliminate the possibility of lithium dendrite formation. The as-obtained lithium metal electrode delivers a Coulombic efficiency of 99.86% in the 100th cycle, and maintains a low deposition overpotential of 0.01 V for 800 h.
文摘Titanium dioxide (TiO<sub>2</sub>) doped with neodymium (Nd) and/or Gadolinium (Gd) rare-earth elements were fabricated into nanotubes via the hydrothermal method in a KOH solution and in-situ doping. Titanium dioxide nanotubes (TNTs) and in-situ Nd-doped and/or Gd-doped TNTs were characterized with transmission and scanning electron microscopy, energy-dispersive X-ray analysis, X-ray diffraction, Raman spectroscopy, and Fourier-transform infrared spectroscopy. Morphologies indicated a network of aggregated nanotubes. The phase and composition analyses revealed that the lanthanide TNTs had anatase phases with Nd and/or Gd nanoparticles in the TNT lattice. The nanoparticles were uniformly deposited on the surface because of hydroxyl groups on the TNT surfaces, resulting in a very high loading density. The outer diameter and the length of the TNTs increased with doping. The mechanisms for the formation of multiwall TNTs are discussed.
文摘We report the SERS enhancements of Raman forbidden surface modes of TiO<sub>2</sub> in different sized TiO<sub>2</sub> crystals. This current study utilizes the relationship between the vibronic coupling and the degree of charge-transfer to explain the differences of Surface Enhanced Raman Scattering (SERS) enhancements. Our study shows a direct correlation between the degree of charge-transfer and vibronic coupling. This relationship suggests that charge-transfer between the N-719 dye and TiO<sub>2</sub> due to vibronic coupling plays a fundamental role in SERS enhancements. Furthermore, this study shows a strong dependence of the enhancements of the N-719 dye molecular modes to that of the surface modes. This indicates that the mechanism that governs the enhancements of the surface modes in TiO<sub>2</sub> crystals most likely also dictates the enhancements of the N-719 dyes.
