Functionalization of Nylon Fabrics with Dopamine Deposition and TiO2 Nanoparticles Immobilization

Ultraviolet(UV)radiation can cause degradation or aging of many polymers and shorten the working-life of their products.Thus,UV protective covers are required in various occasions.Textiles with the UV-shielding function possess unique properties compared with those covers in board or film shapes.TiO_2 nanoparticles(NPs),which were reported to have superior UV blocking function,can be used to produce UV protective covers in combination with fabric.However,efficient and environmentally friendly immobilization of TiO_2 Nps onto the fabrics is challenging.Polydopamine(PDA),a biomimetic synthetic polymer,has attracted great attentions recently due to its superior affinity to various materials and facile application procedure.Hence,in this research,the surface of nylon fabrics was modified by PDA to immobilizeTiO_2 NPs.Themodificationconditionswere systematically optimized.The immobilization of the NPs was confirmed by Fourier transform infrared spectrometer(FTIR)and scanning electron microscope(SEM).The functionalized nylon fabrics were proved to exhibit improved UV protection properties even after washing.This work provides a new and versatile surface modification technique for textiles.

TiO2 nanoparticles in aquatic environments:impact on heavy metals distribution in sediments and overlying water

The extensive application of TiO_(2)nanoparticles(NPs)highlights the importance of investigating their influence on aquatic systems.In this work,the effect of TiO_(2)NPs on heavy metals speciation was studied on a lab scale.For this goal,a series of aquaria containing water,sediment,and TiO_(2)NPs with various concentrations were set up.The study results revealed that TiO_(2)NPs caused(copper)Cu,(mercury)Hg,(titanium)Ti,and(zinc)Zn to be adsorbed by sediments in the forms of exchangeable and Fe-Mn species.According to measurements,30μg/L of TiO_(2)NPs made Cu,Hg,Ti and Zn concentration in the water column decreased from 33,1.14,20,and 32 to 4,0.58,3,and 22.3μg/L,respectively.Manganese(Mn)was also adsorbed by sediment,and in all experiments,its concentration in the water column reduced from 44 to about 20μg/L.Due to the photocatalytic capacity of TiO_(2)NPs,arsenic(As)concentration in the water column increased from 0 to 8.7μg/L with the introduction of30μg/L of TiO_(2)NPs.The sequential extraction results showed that in all experiments,concentrations of lead(Pb),nickel(Ni),and cobalt(Co)remained constant in different chemical species of sediment,which meant conservative behavior of them in presence of TiO_(2)NPs.In addition,a remarkable change was observed in water quality parameters such as ORP,TDS,TOC,BOD,NO3’and PO_(4)after the introduction of TiO_(2)NPs to aquaria.The reason behind these changes could be related to the decomposition of sediment organic content by TiO_(2)NPs.

A Novel Toxicological Evaluation of TiO2 Nanoparticles on DNA Structure0

TiO2 has been tested to be toxic to DNA under the photo-irradiation of ultraviolet A （UVA）. However, in the dark conditions, after several days of treatment with TiO2 in aqueous solution, the interaction between TiO2 and two types of DNA was detected and the mechanisms were studied by the methods of gel-electrophoresis, IR spectroscopy and TEM. The results showed that the DNA would be bound to TiO2; the ratio of binding was related to the concentration and the treating time; the mechanism of binding is related to phosphate groups of DNA. Besides, DNA with different structure showed different degree of binding. These findings showed a new possible way through which the TiO2 nanoparticles interact with DNA.

One Step Preparation of Highly Dispersed TiO2 Nanoparticles

A facile approach was developed to prepare highly dispersed TiO2 nanoparticles with selected phase. The crystallization phase of the nanoparticles can be easily tuned from anatase to rutile by the dosage of hydrochloric acid in the reaction system. The crystallite size of the as-prepared anatase TiO2 nanoparticles was ca. 3.2 nm with high dispersion. A transparent TiO2 colloid was obtained by dispersing the as-prepared anatase TiO2 nanoparticles in deionized water without any organic additives added. The concentration of TiO2-H2O colloid can be as high as 1600 g/L. The optical transmittance of TiO2-H2O colloid with a low concentration was nearly 100% in the visible region. Furthermore, anatase TiO2 nanoparticles（TiO2-NPs） showed superior photocatalytic performance compared to rutile TiO2-NPs.

A Comparative Toxicity Study of TiO2 Nanoparticles in Suspension and Adherent Culture Under the Dark Condition

The present study focused on the different acute toxicity of TiO2 nanoparticles（TiO2 NPs） towards the bacteria in suspension culture and adherent culture under the dark conditions. The study investigated the bacteria toxicity with TiO2 NPs at different concentrations（1-2000 mg/L）, sizes（10 nm, 35 nm） and specific surface areas in unit volume solution（0-224 m^2/L） characterized by the cell viability, extracellular polymeric substances（EPS） release and biofilm formation. The bacteria in adherent culture was found to be more resistant against the toxicity of TiO2 NPs compared to that in suspension culture. An NP dose and surface area dependent（rather than the size） bacterial viability was observed in suspension culture, specifically the surface area positively correlated with the toxicity of TiO2 NPs. The size of TiO2 NPs, however, played a more critical role in toxicity of TiO2 NPs in adherent culture. Therefore, the surface area dependent toxicity of TiO2 NPs is a comprehensive parameter describing the dose and size dependent toxicity of TiO2 NPs. The electron microscopic（SEM, TEM, EDX） observations suggested the EPS release and biofilm formation, during aggregation of TiO2 NPs on the bacteria after 12 h cultivation in adherent culture under the dark condition. A possible toxic mechanism could be that ＂effective surface areas＂ that directly contact with the bacterial membrane greatly contributed to the toxicity of TiO2 NPs in both suspension culture and adherent culture. Therefore, as for the possible resistance mechanism, EPS secretion and subsequent biofilm formation may protect the bacteria against the toxicity of TiO2 NPs.

Photocatalytic Nanocomposite Films Fabricated by Layer-by-Layer Self-assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO2 nanoparticles and lignosulfonates （LS） were fabricated on quartz slides by the layer-by-layer （LBL） self-assembly technique. X-ray photoelectron spectroscopy （XPS）, UV-vis spectroscopy and atomic force microscopy （AFM） were used to characterize the TiO2/LS multilayer nanocomposite films. Moreover, the photocatalytic properties （decomposition of methyl orange and bacteria） of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV-Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO2 nanoparticles when a 10-bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiOz/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO2 layers, and the results of decomposition of bacteria under UV irradiation showed that TiO2/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria （Escherichia coil）.

Effect of sub-acute exposure to TiO_2 nanoparticles on oxidative stress and histopathological changes in Juvenile Carp (Cyprinus carpio)

Increasing application of nanotechnology highlights the need to clarify and understand nanotoxicity. Mammalian and in vitro studies have raised concerns about the toxicity of titanium dioxide nanoparticles （TiO2-NPs）, but there are limited data on ecotoxicity to aquatic organisms. In this work, the sub-acute toxicity of TiO2-NPs to carp （Cyprinus carpio） was assessed. Superoxide dismutase （SOD）, catalase （CAT） and peroxidase （POD） activities and lipid peroxidation （LPO） levels in liver, gill and brain tissues of carps varied with concentration of TiO2-NPs suspensions and exposure time （up to 8 d）. As a result, 100 and 200 mg/L TiO2-NPs caused statistically significant decrease in SOD, CAT and POD activities and significant increase in LPO levels in tissues （P 〈 0.05）, suggesting that the fish exposed to these two concentrations of TiO2-NPs suffered from the oxidative stress. The extent of depletion of antioxidant enzymes activities and the elevation of LPO in the liver was the greatest, indicating that the liver might be the most susceptible organ to TiO2-NPs exposure. In addition, carps had gill pathologies including edema and thickening of gill lamellae as well as gill filaments, and liver pathologies including necrotic and apoptosis hepatocytes after exposed to 100 and 200 mg/L TiO2-NPs for 20 d. These results indicated a potential risk from TiO2-NPs released into the aqueous environment.

Electrochemical determination of vitamin C in the presence of uric acid by a novel TiO_2 nanoparticles modified carbon paste electrode

The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.

Preparation of TiO_2 Nanoparticles Coated Cotton Fibers at Low Temperature and Their Photocatalytic Activity

TiO_2 nanoparticles coated cotton fiber composite was successfully prepared by using a sol-gel method at low temperature(about 100℃) using tetrabutyl-titanate [Ti(OBu)_4] as raw material.The preparation of the TiO_2 colloid and the composite were described.The properties of resulting materials were characterized by SEM and XRD,the photocatalytic degradation performance was tested using methylene blue(MB) as the target pollutant in aqueous solution.The results showed that the amorphous TiO_2 nanoparticles were distributed evenly on the outer surfaces of cotton fibers,which shows efficient photocatalytic properties when exposed to UV light,the degradation rate of MB reached 95.35% under the conditions of catalyst dosage 2.5 g/L,MB concentration 50 mg/L,irradiation time 120 min,and pH 10,and the photocatalytic activity of TiO_2/cotton fibers remained above 90% of its activity as-prepared after being used four times,the degradation rate of MB could reach 88.78% when irradiation time was 120 min.The photocatalytic degradation of MB could be properly described by the first-order kinetic law.By comparison of the removal rates of MB with and without UV light,it could be affirmed that the disappearance of MB was due to photodegradation rather than adsorption on cotton fibers.

STM and STS investigations of Ce-doped TiO_2 nanoparticles

Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results of scanning tunneling spectroscopy （STS） show that the surface electronic structures of TiO2 nanoparticles are modified by introducing new electronic states in the surface band gap through cerium ion doping. The results are discussed in terms of the influence of doping concentration on the surface band gap of TiO2.

Effect of TiO_2 Nanoparticles on Photochromism of WO_3 Colloids

WO2 and TiO2 colMds were synthesized by the hydrolysis technique and part of the TiO2 colloid was treated by means of the hydrothermal method. The photochromic performances of the resulting materials obtained via combining the WO3 colloid with the treated TiO2 colloid and the non-treated TiO2 colloid, respectively, are very different. The TiO2 colloid without hydrothermal treatment can effectively improve the photochromic performance of the WO3colloid. The TiO2 nanoparticles were investigated in detail by XRD, TEM, surface photovohage spectra（SPS） and field-induced surface photovoltage spectrometry（FISPS）. The photochromism mechanism of WO3 colloid is discussed.

Surface Texturing of TiO_2 Film by Mist Deposition of TiO_2 Nanoparticles

Unique and various microstructures of titanium oxide(TiO_2 ) film including macroporous structure, chromatic veins and rings, have been easily fabricated by mist deposition method on silicon substrate with mild preparation conditions. Rutile phase TiO_2 nanoparticles were directly used as starting material to prepare film and led to a simple preparation process. It was found that several different microstructures existed in the sample and changed with the varied positions from the center to the edge of the film when the concentration of the TiO_2 suspension is 0.06 mol/l, the deposition time is 30 min, the flow rate is 1 l/min and the temperature is150. The surface texturing shows apparent distinction as the concentration of the TiO_2 suspension decreased to 0.03 mol/l and 0.01 mol/l.

The Gas Nucleation Process Study of Anatase TiO_2 in Atmospheric Non-Thermal Plasma Enhanced Chemical Vapor Deposition

Abstract The gas phase nucleation process of anatase TiO2 in atmospheric non-thermal plasma enhanced chemical vapor deposition is studied. The particles synthesized in the plasma gas phase at different power density were collected outside of the reactor. The structure of the collected particles has been investigated by field scanning electron microscope （FESEM）, X-ray diffraction （XRD）, high resolution transmission electron microscopy （HRTEM） and selected area electron diffraction （SAED）. The analysis shows that uniform crystalline nuclei with average size of several nanometers have been formed in the scale of micro second through this reactive atmo- spheric plasma gas process. The crystallinity of the nanoparticles increases with power density. The high density of crystalline nanonuclei in the plasma gas phase and the low gas temperature are beneficial to the fast deposition of the 3D porous anatase TiO2 film.

Analysis of trace mercury in water by solid phase extraction using dithizone modified nanometer titanium dioxide and cold vapor atomic absorption spectrometry

A new method for analysis of trace mercury in water samples was developed, based on the combination of preconcentration/separation using dithizone-modified nanometer titanium dioxide （TiO2） as a solid phase extractant and determination by cold vapor atomic adsorption spectrometry （CVAAS）. Dithizone was dissolved with alcohol and loaded on the surface of nano-sized TiO2 powders by stirring. The static adsorption behavior of Hg^2＋on the dithizone-modified nanoparficles was investigated in detail. It was found that excellent adsorption ratio for Hg^2＋ could be obtained in the pH range of 7-8 with an oscillation time of 15 rain, and a 5 mL of 3.5 mol·L^-1 HCI solution could quantitatively elute Hg^2＋ from nanometer TiO2 powder. Common coexisting ions caused no obvious influence on the determination of mercury. The mechanisms for the adsorption and desorption were discussed. The detection limit （30） for Hg^2＋ was calculated to be 5 ng·L^-1. The proposed method was applied to the determination of Hg^2＋ in a mineral water sample and a Zhujiang River water sample. By the standard addition method, the average recoveries were found to be 94.4%-108.3% with RSD （n = 5） of 2.9%-3.5%.

Fabrication, modification and environmental applications of TiO2 nanotube arrays （TNTAs） and nanoparticles

Among the semiconductors, titanium dioxide has been identified as an effective photocatalyst due to its abundance, low cost, stability, and superior electronic energy band structure. Highly ordered nanotube arrays of titania were produced by anodization and mild sonication. The band gap energy of the titania nanotube arrays was reduced to 2.6 eV by co-doping with Fe, C, N atoms using an electrolyte solution containing K3Fe（CN）6. The photo- conversion of phenol in a batch photoreactor increased to more than 18% based on the initial concentration of phenol by using a composite nanomaterial consisting of titania nanotube arrays and Pt/ZIF-8 nanoparticles. A layer-by- layer assembly technique for the deposition of titania nanoparticles was developed to fabricate air filters for the degradation of trace amounts of toluene in the air and preparation of superhyrophobic surfaces for oil-water separation and anti-corrosion surfaces.

Template-Directed Fabrication of Anatase TiO2 Hollow Nanoparticles and Their Application in Photocatalytic Degradation of Methyl Orange

Polymerization-induced self-assembly （PISA） was used to fabricate polymeric nanoparticles via reversible ad- dition-fragmentation chain transfer （RAFT） dispersion polymerization of benzyl methacrylate （BzMA） using di- block copolymer poly（glycerol monomethacrytate）-block-poly（2-dimethylaminoetbyl methacrylate） （PGMMA- PDMAEMA-CTA） as the macro RAFT agent. The dispersion of polymeric nanoparticles with a final concentration of about 210 mg/g （solid content of 21%） was obtained via this efficient method （PISA）. The resultant polymeric nanoparticles consisting of corona-shell-core three layers with weak polyelectrolyte PDMAEMA as the shell were used as sacrificial template to fabricate TiO2 hollow nanoparticles. The negatively charged titanium precursor was absorbed into the PDMAEMA shell via the electrostatic interaction, and hydrolyzed to form polymer/TiO2 hybrid nanoparticles. Anatase TiO2 hollow nanoparticles were formed after removing the polymeric templates by calcina- tion at 550 ℃. The experiments of photocatalytic degradation of methyl orange showed that the resultant anatase TiO2 hollow nanoparticles had high photocatalytic activity and good reusability.

Fulvic acid degradation using nanoparticle TiO_2 in a submerged membrane photocatalysis reactor

The degradation of fulvic acid（FA） by nanoparticle TiO2 in a submerged membrane photocatalysis（SMPC） reactor was studied. In this reactor, photocatalytic oxidation and membrane separation co-occured. The continuous air supplier provided O2 for the photocatalytical reaction and mixed the solution through an airflow controller. The particle TiO2 could automatically settle due to gravity without particle agglomeration so it could be easily separated by microfiltration（MF） membrane. It was efficient to maintain high flux of membranes. The effects of operational parameters on the photocatalytic oxidation rate of FA were investigated. Results indicated that photocatalyst at 0.5 g/L and airflow at 0.06 m^3/h were the optimum condition for the removal of fulvic acid, the removal efficiency was higher in acid media than that in alkaline media. The effects of different filtration duration on permeate flux rate of MF with P25 powder and with nanoparticle TiO2 were compared. Experimental results indicated that the permeate flux rate of MF was improved and the membrane fouling phenomenon was reduced with the addition of nanoparticle TiO2 catalyst compared with conventional P25 powder. Therefore, this submerged membrane photocatalysis reactor can faciliate potential application of photocatalytic oxidation process in drinking water treatment.

TiO_2 nanoparticle-based electron transport layer with improved wettability for efficient planar-heterojunction perovskite solar cell

The electron transport layer （ETL） plays an important role in planar heterojunction perovskite solar cell （PSCs）, by affecting the light-harvesting, electron injection and transportation processes, and especially the crystal- lization of perovskite absorber. In this work, we utilized a commercial TKD-TiO2 nanoparticle with a small diameter of 6 nm for the first time to prepare a compact ETL by spin coating. The packing of small-size particles endowed TKD-TiO2 ETL an appropriate surface-wettability, which is beneficial to the crystallization of perovskite deposited via solution-processed method. The uniform and high-transmittance TKD-TiO2 films were successfully incorporated into PSCs as ETLs. Further careful optimization of ETL thickness gave birth to a highest power conversion efficiency of 11.0%, which was much higher than that of PSC using an ETL with the same thickness made by spray pyrolysis. This TKD-TiO2 provided a universal solar material suitable for the further large-scale production of PSCs. The excellent morphology and the convenient preparation method of TKD-TiO2 film gave it an extensive application in photovoltaic devices.

Novel water-based nanolubricant with superior tribological performance in hot steel rolling

Novel water-based nanolubricants using TiO2 nanoparticles(NPs)were synthesised by adding sodium dodecyl benzene sulfonate(SDBS)and glycerol,which exhibited excellent dispersion stability and wettability.The tribological performance of the synthesised nanolubricants was investigated using an Rtec ball-on-disk tribometer,and their application in hot steel rolling was evaluated on a 2-high Hille 100 experimental rolling mill,in comparison to those without SDBS.The water-based nanolubricant containing 4 wt%TiO2 and 0.4 wt%SDBS demonstrated superior tribological performance by decreasing coefficient of friction and ball wear up to 70.5%and 84.3%,respectively,compared to those of pure water.In addition to the lubrication effect,the suspensions also had significant effect on polishing of the work roll surface.The resultant surface improvement thus enabled the decrease in rolling force up to 8.3%under a workpiece reduction of 30%at a rolling temperature of 850◦C.The lubrication mechanisms were primarily ascribed to the formation of lubricating film and ball-bearing effect of the TiO2 NPs.

Effects of TiO_2 nanoparticles on the aquatic plant Spirodela polyrrhiza: Evaluation of growth parameters, pigment contents and antioxidant enzyme activities

Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxide nanoparticles（TiO2-NPs） are produced worldwide in large quantities for a wide range of purposes. In the present study, the uptake of TiO2-NPs by the aquatic plant Spirodela polyrrhiza and the consequent effects on the plant were evaluated.Initially, structural and morphological characteristics of the used TiO2-NPs were determined using XRD, SEM, TEM and BET techniques. As a result, an anatase structure with the average crystalline size of 8 nm was confirmed for the synthesized TiO2-NPs. Subsequently, entrance of TiO2-NPSto plant roots was verified by fluorescence microscopic images. Activity of a number of antioxidant enzymes, as well as, changes in growth parameters and photosynthetic pigment contents as physiological indices were assessed to investigate the effects of TiO2-NPs on S. polyrrhiza. The increasing concentration of TiO2-NPs led to the significant decrease in all of the growth parameters and changes in antioxidant enzyme activities. The activity of superoxide dismutase enhanced significantly by the increasing concentration of TiO2-NPs. Enhancement of superoxide dismutase activity could be explained as promoting antioxidant system to scavenging the reactive oxygen species. In contrast, the activity of peroxidase was notably decreased in the treated plants. Reduced peroxidase activity could be attributed to either direct effect of these particles on the molecular structure of the enzyme or plant defense system damage due to reactive oxygen species.