Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ de...Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ desulfurization and viscosity reduction of heavy oil.The physical and chemical properties of catalysts were characterized by XPS,XRD,TEM,NH3-TPD,etc.The effects of temperature,catalyst type and addition amount on viscosity and composition of heavy oil were evaluated.The results showed that the presence of MoO_(3)–ZrO_(2)/HZSM-5 nanoparticles during aquathermolysis could improve the oil quality by reducing the heavy fractions.It reduced viscosity by 82.56%after the reaction at 280℃ and catalyst addition of 1 wt%.The contents of resins and asphaltic in the oil samples were 5.69%lower than that in the crude oil.Sulfur content decreased from 1.45%to 1.03%.The concentration of H2S produced by the reaction was 2225 ppm.The contents of sulfur-containing functional groups sulfoxide and sulfone sulfur in the oil samples decreased by 19.92%after the catalytic reaction.The content of stable thiophene sulfur increased by 5.71%.This study provided a basis for understanding the mechanism of heavy oil desulfurization and viscosity reduction.展开更多
Shape-selective methylation of 2-methylnaphthalene (2-MN) was carried out over NH 4 F and Pt modified HZSM-5 (SiO 2 /Al 2 O 3 = 83) catalysts in a fixed-bed down-flow reactor using methanol as methylating agent and 1,...Shape-selective methylation of 2-methylnaphthalene (2-MN) was carried out over NH 4 F and Pt modified HZSM-5 (SiO 2 /Al 2 O 3 = 83) catalysts in a fixed-bed down-flow reactor using methanol as methylating agent and 1,3,5-trimethylbenzene (1,3,5-TMB) as a solvent. Pt promoted HZSM-5 catalysts showed low concentration of coke-like polycondensed aromatics, NH 4 F modification decreased non-shape-selective acid sites. After Pt and NH 4 F co-modification, both conversion of 2-MN and selectivity to 2,6-DMN were improved. 6%NH 4 F/0.5%Pt/HZSM-5 catalyst exhibited 13.8% of 2-MN conversion with 6.2% of 2,6-DMN yield after 7 h time on stream (TOS), and 2,6-/2,7-DMN ratio of 1.7 after 10 h of TOS.展开更多
A series of composite catalysts were prepared by the wet mixing method, and the mass ratio of CuO-ZnO-Al2O3-ZrO2 component to HZSM-5 zeolite （molar ratio of SiO2 to Al2O3 being 25） was 2：1. The CuO-ZnO-Al2O3-ZrO2 ...A series of composite catalysts were prepared by the wet mixing method, and the mass ratio of CuO-ZnO-Al2O3-ZrO2 component to HZSM-5 zeolite （molar ratio of SiO2 to Al2O3 being 25） was 2：1. The CuO-ZnO-Al2O3-ZrO2 （CuO/ZnO/Al2O3=3/6/1 by weight） component was prepared by a modified ＇two-step＇ co-precipitation method. The effects of ZrO2 on the performance of CuO-ZnO-Al2O3/HZSMo5 catalyst for dimethyl ether synthesis from CO2 hydrogenation were investigated. It was found that ZrO2 improved the properties of CuO-ZnO-Al2O3/HZSM-5 as a structural promoter.展开更多
基金support provided by the National Science and Technology Major Project of the Ministry of Science and Technology of China(2016ZX05012-002-005)Shandong Provincial Natural Science Foundation(Grant no.:ZR2021QE051)+1 种基金National Natural Science Foundation of China(Grant no.:52206291)the Fundamental Research Funds for the Central Universities(Grant no.:22CX06030A).
文摘Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ desulfurization and viscosity reduction of heavy oil.The physical and chemical properties of catalysts were characterized by XPS,XRD,TEM,NH3-TPD,etc.The effects of temperature,catalyst type and addition amount on viscosity and composition of heavy oil were evaluated.The results showed that the presence of MoO_(3)–ZrO_(2)/HZSM-5 nanoparticles during aquathermolysis could improve the oil quality by reducing the heavy fractions.It reduced viscosity by 82.56%after the reaction at 280℃ and catalyst addition of 1 wt%.The contents of resins and asphaltic in the oil samples were 5.69%lower than that in the crude oil.Sulfur content decreased from 1.45%to 1.03%.The concentration of H2S produced by the reaction was 2225 ppm.The contents of sulfur-containing functional groups sulfoxide and sulfone sulfur in the oil samples decreased by 19.92%after the catalytic reaction.The content of stable thiophene sulfur increased by 5.71%.This study provided a basis for understanding the mechanism of heavy oil desulfurization and viscosity reduction.
基金Supported by the Program for New Century Excellent Talents in University (NCET-04-0268)the Expertise-Introduction Project for Disciplinary Innovation of Universities
文摘Shape-selective methylation of 2-methylnaphthalene (2-MN) was carried out over NH 4 F and Pt modified HZSM-5 (SiO 2 /Al 2 O 3 = 83) catalysts in a fixed-bed down-flow reactor using methanol as methylating agent and 1,3,5-trimethylbenzene (1,3,5-TMB) as a solvent. Pt promoted HZSM-5 catalysts showed low concentration of coke-like polycondensed aromatics, NH 4 F modification decreased non-shape-selective acid sites. After Pt and NH 4 F co-modification, both conversion of 2-MN and selectivity to 2,6-DMN were improved. 6%NH 4 F/0.5%Pt/HZSM-5 catalyst exhibited 13.8% of 2-MN conversion with 6.2% of 2,6-DMN yield after 7 h time on stream (TOS), and 2,6-/2,7-DMN ratio of 1.7 after 10 h of TOS.
文摘A series of composite catalysts were prepared by the wet mixing method, and the mass ratio of CuO-ZnO-Al2O3-ZrO2 component to HZSM-5 zeolite （molar ratio of SiO2 to Al2O3 being 25） was 2：1. The CuO-ZnO-Al2O3-ZrO2 （CuO/ZnO/Al2O3=3/6/1 by weight） component was prepared by a modified ＇two-step＇ co-precipitation method. The effects of ZrO2 on the performance of CuO-ZnO-Al2O3/HZSMo5 catalyst for dimethyl ether synthesis from CO2 hydrogenation were investigated. It was found that ZrO2 improved the properties of CuO-ZnO-Al2O3/HZSM-5 as a structural promoter.
