The development of 3D structural composites with electromagnetic(EM)wave absorption could attenuate EM waves.Herein,magnetized flower-like Cu_(9)S_(5)/ZnFe_(2)O_(4)composites were fabricated through a multistep hydrot...The development of 3D structural composites with electromagnetic(EM)wave absorption could attenuate EM waves.Herein,magnetized flower-like Cu_(9)S_(5)/ZnFe_(2)O_(4)composites were fabricated through a multistep hydrothermal method.The crystallographic and surface phase chemical information,morphological structure,and magnetic and EM parameters of the composites were analyzed.The prepared Cu_(9)S_(5)/ZnFe_(2)O_(4)composites have multiple loss paths for EM waves and present an overall 3D flower-like structure.The Cu_(9)S_(5)/ZnFe_(2)O_(4)composites exhibit a minimum reflection loss of-54.38 dB and a broad effective absorption bandwidth of 5.92 GHz.Through magnetization,ZnFe_(2)O_(4)particles are self-assembled and grown on the surfaces of Cu_(9)S_(5).Such a modification is conducive to the generation of additional cross-linking contact sites and the effective introduction of a large number of phase interfaces,crystalline defects,special three-dimensional flower-like structures,and magneto-electrical coupling loss effects.Moreover,the synergistic effect of multiple loss strategies effectively improves EM wave absorption by the material.This work can provide a strategy for the use of magnetizationmodified sulfide composite functional materials in EM wave absorption.展开更多
LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2)@Cr_(2)O_(5)composite electrode combines the high rate-capability characteristics of NCA with the stability of Cr_(2)O_(5),playing a synergistic role in improving the cyclic stability,...LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2)@Cr_(2)O_(5)composite electrode combines the high rate-capability characteristics of NCA with the stability of Cr_(2)O_(5),playing a synergistic role in improving the cyclic stability,initial discharge capacity and the security of low cut-off voltage(2.0 V).When the mass ratio of Cr_(2)O_(5)in NCA is 45%(mass),the capacity retention rate increases from 58.5% without Cr_(2)O_(5)to 69.3% in the range of 2.0-4.3 V.The initial discharge capacity of NCA@Cr_(2)O_(5)composite material is 211.4 mA·h·g^(-1),its first coulombic efficiency is 94.2%,and the charging capacity remains approximately constant when mixed with 15%(mass)Cr_(2)O_(5).The reason for the improvement of the initial charge-discharge efficiency(ICDE)was explained.Impedance and cyclic voltammetry analysis reveal more detailed reasons of the observed improvements.Compared with NCA cathode material,the NCA@Cr_(2)O_(5)composite material can provide not only additional stable sites and channels for Li^(+)insertion/extraction to make up for the loss of active Li^(+)sites and prevent the accumulation of Li+in the circulation process,but also protect the NCA electrode from the corrosion of the electrolyte decomposition by the Cr_(2)O_(5)nanoparticles adhering to NCA interface.展开更多
基金This work was supported by the National Natural Science Foundation of China(No.51477002)the University Synergy Innovation Program of Anhui Province,China(No.GXXT-2019-028).
文摘The development of 3D structural composites with electromagnetic(EM)wave absorption could attenuate EM waves.Herein,magnetized flower-like Cu_(9)S_(5)/ZnFe_(2)O_(4)composites were fabricated through a multistep hydrothermal method.The crystallographic and surface phase chemical information,morphological structure,and magnetic and EM parameters of the composites were analyzed.The prepared Cu_(9)S_(5)/ZnFe_(2)O_(4)composites have multiple loss paths for EM waves and present an overall 3D flower-like structure.The Cu_(9)S_(5)/ZnFe_(2)O_(4)composites exhibit a minimum reflection loss of-54.38 dB and a broad effective absorption bandwidth of 5.92 GHz.Through magnetization,ZnFe_(2)O_(4)particles are self-assembled and grown on the surfaces of Cu_(9)S_(5).Such a modification is conducive to the generation of additional cross-linking contact sites and the effective introduction of a large number of phase interfaces,crystalline defects,special three-dimensional flower-like structures,and magneto-electrical coupling loss effects.Moreover,the synergistic effect of multiple loss strategies effectively improves EM wave absorption by the material.This work can provide a strategy for the use of magnetizationmodified sulfide composite functional materials in EM wave absorption.
基金financially supported by the National Natural Science Foundation of China (52064031)the Program for Innovative Research Team in the University of Ministry of Education of China (IRT_17R48)National Natural Science Foundation of China (51674129)
文摘LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2)@Cr_(2)O_(5)composite electrode combines the high rate-capability characteristics of NCA with the stability of Cr_(2)O_(5),playing a synergistic role in improving the cyclic stability,initial discharge capacity and the security of low cut-off voltage(2.0 V).When the mass ratio of Cr_(2)O_(5)in NCA is 45%(mass),the capacity retention rate increases from 58.5% without Cr_(2)O_(5)to 69.3% in the range of 2.0-4.3 V.The initial discharge capacity of NCA@Cr_(2)O_(5)composite material is 211.4 mA·h·g^(-1),its first coulombic efficiency is 94.2%,and the charging capacity remains approximately constant when mixed with 15%(mass)Cr_(2)O_(5).The reason for the improvement of the initial charge-discharge efficiency(ICDE)was explained.Impedance and cyclic voltammetry analysis reveal more detailed reasons of the observed improvements.Compared with NCA cathode material,the NCA@Cr_(2)O_(5)composite material can provide not only additional stable sites and channels for Li^(+)insertion/extraction to make up for the loss of active Li^(+)sites and prevent the accumulation of Li+in the circulation process,but also protect the NCA electrode from the corrosion of the electrolyte decomposition by the Cr_(2)O_(5)nanoparticles adhering to NCA interface.
