We report a facile solution method to form titanium oxide(TiO_(2))nano-flower structure on the titanium(Ti)substrates for realizing good physical sterilization and biocompatibility.We first prepare TiO_(2) nanotubes(N...We report a facile solution method to form titanium oxide(TiO_(2))nano-flower structure on the titanium(Ti)substrates for realizing good physical sterilization and biocompatibility.We first prepare TiO_(2) nanotubes(NT)with a diameter of about 80-100 nm and a length of about 5μm on Ti substrates by anodization,which is utilized as precursor.Then,we employ immersion treatment in different concentrations of phosphoric acid solution at 75℃ for 5 h to realize the transformation from TiO_(2) NT to TiO_(2) nano-flower structure.In addition,we studied the effects of phosphoric acid concentration(1 wt%,2.5 wt%,5 wt% and 10 wt%)on the TiO_(2) nano-flower structure,and the antibacterial properties and biocompatibility of the TiO_(2) nano-flower structure.The results show that TiO_(2) nano-flower structure become larger and thicker with the increase in the phosphoric acid concentration,and the thickness of the coating can reach 6.88μm.Meanwhile,the TiO_(2) nano-flower structure shows good physical sterilization effect,especially for the TiO_(2) nano-flower structure formed in 10 wt%H^(3)PO_(4) solution,the antibacterial rate can reach 95%.In addition,the TiO_(2) nano-flower structure have no toxicity to the osteoblasts and support cell growth.展开更多
化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于...化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于光催化降解不同有机污染物显得尤为重要。采用一步无模板溶剂热法合成了核壳结构的C-TiO_(2)复合材料前驱体,并在氩气气氛下煅烧得到高结晶度的C-TiO_(2)复合光催化材料。运用SEM、TEM、XRD和TG等表征手段对材料进行表征,结论如下:550℃煅烧时的样品为包含少量碳的高结晶度的锐钛矿相TiO 2,且550℃煅烧时的样品依然保持了完整的核壳结构。此外,C-TiO_(2)复合材料的比表面积高达85.69 m 2·g^(-1),平均孔径为16.4 nm以及孔体积为0.423 m 3·g^(-1)。在UV-Vis光照射下,C-TiO_(2)复合材料分别对罗丹明B(RhB)、亚甲基蓝(MB)和刚果红(CR)3种染料显示出增强的光催化降解活性。展开更多
基金jointly supported by the Four“Batches”Innovation Project of Invigorating Medical through Science and Technology of Shanxi Province(2022XM12)the Central Leading Science and Technology Development Foundation of Shanxi Province(YDZJSX2021A019)+1 种基金the Key Research and Development Program of Shanxi Province(202102130501007)the Natural Science Foundation of Shanxi Province(202103021223102,202203021222127).
文摘We report a facile solution method to form titanium oxide(TiO_(2))nano-flower structure on the titanium(Ti)substrates for realizing good physical sterilization and biocompatibility.We first prepare TiO_(2) nanotubes(NT)with a diameter of about 80-100 nm and a length of about 5μm on Ti substrates by anodization,which is utilized as precursor.Then,we employ immersion treatment in different concentrations of phosphoric acid solution at 75℃ for 5 h to realize the transformation from TiO_(2) NT to TiO_(2) nano-flower structure.In addition,we studied the effects of phosphoric acid concentration(1 wt%,2.5 wt%,5 wt% and 10 wt%)on the TiO_(2) nano-flower structure,and the antibacterial properties and biocompatibility of the TiO_(2) nano-flower structure.The results show that TiO_(2) nano-flower structure become larger and thicker with the increase in the phosphoric acid concentration,and the thickness of the coating can reach 6.88μm.Meanwhile,the TiO_(2) nano-flower structure shows good physical sterilization effect,especially for the TiO_(2) nano-flower structure formed in 10 wt%H^(3)PO_(4) solution,the antibacterial rate can reach 95%.In addition,the TiO_(2) nano-flower structure have no toxicity to the osteoblasts and support cell growth.
文摘化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于光催化降解不同有机污染物显得尤为重要。采用一步无模板溶剂热法合成了核壳结构的C-TiO_(2)复合材料前驱体,并在氩气气氛下煅烧得到高结晶度的C-TiO_(2)复合光催化材料。运用SEM、TEM、XRD和TG等表征手段对材料进行表征,结论如下:550℃煅烧时的样品为包含少量碳的高结晶度的锐钛矿相TiO 2,且550℃煅烧时的样品依然保持了完整的核壳结构。此外,C-TiO_(2)复合材料的比表面积高达85.69 m 2·g^(-1),平均孔径为16.4 nm以及孔体积为0.423 m 3·g^(-1)。在UV-Vis光照射下,C-TiO_(2)复合材料分别对罗丹明B(RhB)、亚甲基蓝(MB)和刚果红(CR)3种染料显示出增强的光催化降解活性。
