Enhanced photocatalytic degradation of sulfadiazine by Fe^(3+) in aqueous TiO_2 suspension

In order to explore the reaction mechanism of Fe^3＋ and the mineralization effect of the micropollutant, Fe^3＋ assisted photocatalytic oxidation of sulfadiazine （SD） in the TiO2 suspended solution is investigated. The effect of Fe^3＋ participation, the degradation kinetics of SD, the effect of SD mineralization and the possible mechanism of Fe^3＋ participation in TiO2 suspension are analyzed by adding FeCl3, taking samples at a given time and determining the SD concentration. Results indicate that the degradation of SD catalyzed by TiO2/ Fe^3＋ is faster than that catalyzed by TiO2 or Fe^3＋ separately. The photocatalytic degradation of SD follows the pseudo-first- order kinetics model in a range of 20 to 80 mg/L of initial concentration. The mineralization rate of SD can be enhanced by the addition of Fe^3＋ in the TiO2 suspended solution. The mechanism of the rapid degradation of SD is proposed, which indicates that Fe^3＋ adsorbed on the surface of TiO2 particles acts as an electron acceptor. The amount of recombining electronhole pairs decreases, and the amount of hydroxyl radicals increases. The increased hydroxyl radical strengthens the degradation of SD in the TiO2/Fe^3＋ suspended solution.

Influence of Current Density on the Photocatalytic Activity of Nd:TiO_(2) Coatings

The Nd:TiO_(2 )PEO coatings were formed in a phosphate-based electrolyte with the addition of Nd_(2)O_(3 )under the current density of 150,200,250 and 300 m A/cm^(2).SEM results showed that the micropores decreased on quantity and increased on scale with the increasing current density.AFM results revealed that the roughness of the coatings increased with the increasing current density.Phase and composition analysis showed that the Nd:TiO_(2) coatings were mainly composed of anatase and rutile phase.And the anatase phase content has reached the maximum value at the current density of 250 m A/cm^(2).XPS results indicated that Ti2p spin-orbit components of the Nd:TiO_(2) coatings are shifted towards higher binding energy,compared with the pure TiO_(2) coating,suggesting that some of the Nd^(3+)ions are combined with TiO_(2) lattice and led to dislocation.Photocatalytic test showed that the photocatalytic activity of Nd:TiO_(2) coatings varied in the same pattern with the anatase content variation in Nd:TiO_(2) coatings.The photocatalytic experiment results show that the photocatalytic activity of Nd:TiO_(2) coatings can be greatly enhanced with moderate amount of Nd^(3+).However,excessive amount of Nd^(3+)does not have an effective impact on the photoctalytic activity improvement.

Co_(3)O_(4)/TiO_(2) composite photocatalyst:Preparation and synergistic degradation performance of toluene

TiO_(2) nanobelts and Co_(3)O_(4)/TiO_(2) catalytic materials were prepared using the hydrothermal method.The cat-alyst was characterized by X-ray diffraction,scanning electron microscopy,transmission electron microscopy,X-ray electron spectroscopy,and fluorescence spectroscopy.At room temperature,with a relative humidity of 50.0%,the total gas flow rate of 1.0 L·min-1,the space velocity of 1.05×10^(4) h^(-1),and toluene volume concentration of 25.0µL·L^(-1),two 6 W vacuum ultraviolet lamps were used as light sources to catalyze,degrade,and mineralize toluene.The results show that the prepared catalyst is in the shape of nano-ribbons.The loading of Co_(3)O_(4) inhibits the recombina-tion of photogenerated electrons and holes and can effectively improve the catalytic performance.The Co_(3)O_(4)/TiO_(2) with a load of 6.0%Co_(3)O_(4) has the best catalytic effect.When N2 was used as a carrier gas,the degradation rate of tol-uene was only 34.7%.The toluene degradation is mainly due to the photolysis of vacuum ultraviolet light.When air was used as a carrier gas,O_(3) was produced.The Co_(3)O_(4)/TiO_(2) with a load of 6.0%and vacuum ultraviolet synergistical-ly promote toluene degradation.The highest degradation rate of toluene was 91.7%and the mineralization rate was 74.6%.The degradation rate of toluene was 2.6 times that of nitrogen as a carrier gas.

Enhanced degradation of tetracycline by gas-liquid discharge plasma coupled with g-C_(3)N_(4)/TiO_(2)

Plasma-catalysis is considered as one of the most promising technologies for antibiotic degradation in water.In the plasma-catalytic system,one of the factors affecting the degradation effect is the performance of the photocatalyst,which is usually restricted by the rapid recombination of electrons and holes as well as narrow light absorption range.In this research,a photocatalyst g-C_(3)N_(4)/TiO_(2) was prepared and coupled with gas-liquid discharge(GLD)to degrade tetracycline(TC).The performance was examined,and the degradation pathways and mechanisms were studied.Results show that a 90%degradation rate is achieved in the GLD with g-C_(3)N_(4)/TiO_(2) over a 10 min treatment.Increasing the pulse voltage is conducive to increasing the degradation rate,whereas the addition of excessive g-C_(3)N_(4)/TiO_(2) tends to precipitate agglomerates,resulting in a poor degradation efficiency.The redox properties of the g-C_(3)N_(4)/TiO_(2) surface promote the generation of oxidizing active species(H2O2,O3)in solution.Radical quenching experiments showed that·OH,hole(h^(+)),play important roles in the TC degradation by the discharge with g-C_(3)N_(4)/TiO_(2).Two potential degradation pathways were proposed based on the intermediates.The toxicity of tetracycline was reduced by treatment in the system.Furthermore,the g-C_(3)N_(4)/TiO_(2) composites exhibited excellent recoverability and stability.

Microwave photocatalytic degradation of Rhodamine B using TiO_2 supported on activated carbon:Mechanism implication

The photocatalytic degradation of Rhodamine B （RhB） was carried out using TiO2 supported on activated carbon （TiO2-AC） under microwave irradiation. Composite catalyst TiO2-AC was prepared and characterized using X-ray diffraction （XRD）, transmission electron microscopy （TEM） and Brunauer-Emmett-Teller （BET）. In the process of microwave-enhanced photocatalysis （MPC）, RhB （30 mg/L） was almost completely decoloured in 10 min, and the mineralization efficiency was 96.0% in 20 min. The reaction rate constant of RhB in MPC using TiO2-AC by pseudo first-order reaction kinetics was 4.16 times of that using Degussa P25. Additionally, according to gas chromatography/mass spectrometry （GC/MS） and liquid chromatography/mass spectrometry （LC/MS） identification, the major intermediates of RhB in MPC included two kinds of N-de-ethylation intermediates （N,N-diethyl-N＇-ethyl-rhodamine （DER））, oxalic acid, malonic acid, snccinic acid, and phthalic acid, maleic acid, 3-nitrobenzoic acid, and so on. The degradation of RhB in MPC was mainly attributed to the destruction of the conjugated structure, and then the intermediates transformed to acid molecules which were mineralized to water and carbon dioxide.

Ti_(3)C_(2) MXene co-catalyst assembled with mesoporous TiO_(2) for boosting photocatalytic activity of methyl orange degradation and hydrogen production

Photocatalytic degradation and hydrogen production using solar energy through semiconductor photocatalysts are deemed to be a powerful approach for solving environmental and energy crisis.However,the biggest challenge in photocatalysis is the efficient separation of photo-induced carriers.To this end,we report that the mesoporous TiO_(2)nanoparticles are anchored on highly conductive Ti_(3)C_(2)MXene co-catalyst by electrostatic self-assembly strategy.The constructed mesoporous TiO_(2)/Ti_(3)C_(2)composites display that the mesoporous TiO_(2)nanoparticles are uniformly distributed on the surface of layer structured Ti_(3)C_(2)nanosheets.More importantly,the as-obtained mesoporous TiO_(2)/Ti_(3)C_(2)composites reveal the significantly enhanced light absorption performance,photo-induced carriers separation and transfer ability,thus boosting the photocatalytic activity.The photocatalytic methyl orange degradation efficiency of mesoporous TiO_(2)/Ti_(3)C_(2)composite with an optimized Ti_(3)C_(2)content(3 wt%)can reach 99.6%within 40 min.The capture experiments of active species confirm that the·O_(2)-and·OH play major role in photocatalytic degradation process.Furthermore,the optimized mesoporous TiO_(2)/Ti_(3)C_(2)composite also shows an excellent photocatalytic H2 production rate of 218.85μmol g^(-1)h^(-1),resulting in a 5.6 times activity as compared with the pristine mesoporous TiO_(2)nanoparticles.This study demonstrates that the MXene family materials can be applied as highly efficient noble-metal-free co-catalysts in the field of photocatalysis.

A Tremella-like Mesoporous Calcium Silicate Loaded by TiO_(2) with Robust Adsorption and Photocatalytic Degradation Capabilities

A titanium dioxide loaded tremella-like mesoporous calcium silicate hydrate(TiO_(2)@CSH)with both adsorption and photocatalytic degradation activity was successfully prepared by a hydrothermal method combined with sol-gel strategy in two steps in this work.Tremella-shaped CSH provides abundant active sites for accommodating of TiO_(2),thus the corresponding TiO_(2)@CSH achieved a high loading ratio of 36.73%.Such a special shaped TiO_(2)@CSH exhibits excellent pre-enrichment capacity and photocatalytic degradation capacity for organic pollutants.Bisphenol A(BPA)removal experiments show that TiO_(2)@CSH can remove 91.17%of BPA from aqueous solutions.Studies on removal mechanism suggest that BPA tends to bind on the interface between CSH and TiO_(2) and the pre-enrichment process conforms to the intraparticle diffusion model;and then,it is decomposed to harmless substances of CO_(2) and H_(2)O during the photocatalytic process.The experimental results show that loading functional nanoparticles such as TiO_(2) on the surface of inorganic porous materials can endow inert porous materials with new functions such as photocatalytic degradation,which effectively expands the application range of inorganic porous materials.

Study of 2-Propanol Photocatalytic Degradation on Surface of Phase-Ratio-Controlled TiO_2 Nanoparticles

The crystal form of TiO_2 is a crucial focus of research on the photocatalytic degradation of gaseous pollutants by TiO_2-based composite photocatalysts. To explore the synergistic effect of mixed crystalline TiO_2 on gaseous organic-pollutant photocatalytic degradation, we synthesized a series of TiO_2 nanoparticles with controllable phase ratios. We explored the role of the TiO_2 phase ratio on the photocatalytic activity and degradation pathway in the photodegradation of 2-propanol(IPA). We estimated the crystallite size and crystal proportions of anatase and rutile by X-ray diffraction. We used the Brunauer-Emmett-Teller method to calculate the specific surface area and Fourier transform infrared spectroscopy to characterize the surface chemistry of the samples. Our results show the photocatalytic activities of pure anatase and the sample with 8.6% rutile to be much better than those of the samples with a phase junction and pure rutile. As such, anatase is the better option for the study of photodegradation design and preparation of gas-phase organic pollutants.

Enhanced visible photocatalytic activity of TiO_2 hollow boxes modified by methionine for RhB degradation and NO oxidation

Hierarchical TiO2 hollow nanoboxes(TiO2‐HNBs)assembled from TiO2 nanosheets(TiO2‐NSs)show improved photoreactivity when compared with the building blocks of discrete TiO2‐NSs.However,TiO2‐HNBs can only be excited by ultraviolet light.In this paper,visible‐light‐responsive N and S co‐doped TiO2‐HNBs were prepared by calcining the mixture of cubic TiOF2 and methionine(C5H11NO2S),a N‐and S‐containing biomacromolecule.The effect of calcination temperature on the structure and performance of the TiO2‐HNBs was systematically studied.It was found that methionine can prevent TiOF2‐to‐anatase TiO2 phase transformation.Both N and S elements are doped into the lattice of TiO2‐HNBs when the mixture of TiOF2 and methionine undergoes calcination at 400°C,which is responsible for the visible‐light response.When compared with that of pure 400°C‐calcined TiO2‐HNBs(T400),the photoreactivity of 400°C‐calcined methionine‐modified TiO2‐HNBs(TM400)improves 1.53 times in photocatalytic degradation of rhodamine‐B dye under visible irradiation(?>420 nm).The enhanced visible photoreactivity of methionine‐modified TiO2‐HNBs is also confirmed by photocatalytic oxidation of NO.The successful doping of N and S elements into the lattice of TiO2‐HNBs,resulting in the improved light‐harvesting ability and efficient separation of photo‐generated electron‐hole pairs,is responsible for the enhanced visible photocatalytic activity of methionine‐modified TiO2‐HNBs.The photoreactivity of methionine modified TiO2‐HNBs remains nearly unchanged even after being recycled five times,indicating its promising use in practical applications.

Heterogeneous Photocatalytic Degradation Kinetic of Gaseous Ammonia Over Nano-TiO_2 Supported on Latex Paint Film

Objective To investigate the photocatalytic degradation of gaseous ammonia in static state by using nano-TiO2 as photoeatalyst supported on latex paint film under UV-irradiation. Methods Experiments were conducted to study the relationship between the initial concentration of ammonia and the degradation products competing to be adsorbed on catalyst surface. Degradation of ammonia and its products were detected by spectrophotometry and catalytic kinetic spectrophotometry, respectively. Results On the one hand, TiO2 catalyst was excellent for degradation of ammonia, and the crystal phase of TiO2, anatase or ruffle, had little effect on degradation of ammonia, but the conversion of ammonia grew with the increase of catalyst content. On the other hand, apparent rate constant and conversion of ammonia decreased with the increase of initial concentration of ammonia, and the photocatalytic degradation reaction followed a pseudo-first-order expression due to-the evidence of linear correlation between -lnC/C0 vs. irradiation time t, but the relationship between initial concentration and the degradation products was not linear in low initial concentration. Conclusion Whether the photocatalytic degradation of ammonia in static state follows a first-order reaction depends on the initial ammonia concentration due to competition in adsorption between reactant and the degradation products.

Evaluations of physico-chemical properties of TiO_(2)/clinoptilolite synthesized via three methods on photocatalytic degradation of crystal violet

Different preparation routes for TiO_(2)-supported natural and synthetic clinoptilolite(TiO_(2)/CP)composites were thoroughly investigated on the basis of sol-gel,hydrothermal,and in-situ hydrothermal methods.The micro-structural features and physicochemical properties of resultant TiO_(2)/CPs were characterized via X-ray diffraction patterns,scanning(transmission)electron microscope images,Fourier transform infrared spectra,inductively coupled plasma-optical emission spectrometry methods,BET-isotherms,UV-visible spectra,and surface charge potential distributions.The results showed that in-situ hydrothermal method led to well dispersions of loaded-TiO_(2) particles on the surface of leaf-like CP,while obviously aggregated TiO_(2) on a relatively distorted structure of CP was obtained using sol-gel and hydrothermal methods.Their adsorptive and photocatalytic efficiencies for removal of crystal violet(CV)dye in aqueous solution were also explored under UV-irradiations.The results demonstrated that TiO_(2)/CPs synthesized via sol-gel and in-situ hydrothermal methods presented the excellent performances with 98% removal efficiencies as compare to the bare commercial TiO_(2) which achieved 53%removal of CV dye.While,the in-situ hydrothermally synthesized TiO_(2)/CPs were the best due to their moderate energy cost,highest adsorption capacities and removal efficiencies.Particularly,the synthetic CPs as supports exhibited synergetic photocatalytic activities for the degradation of CV dye,which is attributed to their high surface areas,better adsorption capability,and fine dispersion of TiO_(2) particles.Adsorption and degradation kinetics of CV dye were found to follow the pseudo-second and pseudo-first order models,respectively.

Formation of active radicals and mechanism of photocatalytic degradation of phenol process using eosin sensitized TiO_2 under visible light irradiation

The role of oxygen and the generation of active radicals in the photocatalitic degradation of phenol were investigated using the eosin sensitized TiO2 as photocatalyst under visible light irradiation. Diffuse reflectance spectra show that the absorbancy range of eosin/TiO2 is expanded from 378 nm (TiO2 ) to about 600 nm. The photocatalitic degradation of phenol is almost stopped when the eosin/TiO2 system is saturated with N2 , which indicates the significance of O2 . The addition of NaN 3 (a quencher of single oxygen) causes about a 62% decrease in the phenol degradation. The phenol degradation ratio is dropped from 92% to 75% when the isopropanol (a quencher of hydroxyl radical) is present in the system. The experimental results show that there are singlet oxygen and hydroxyl radical generated in the eosin/TiO2 system under visible light irradiation. The changes of absorbancy indicate that the hydrogen peroxide might be produced. Through the analysis and comparison, it is found that the singlet oxygen is the predominant active radical for the degradation of phenol.

Characterization and photocatalytic activity for methylene blue degradation of iron-deposited TiO_2 photocatalyst

Iron deposited TiO 2 was prepared by photo reducing ferric ions. The photocatalytic activity of methylene blue degradation was enhanced after TiO 2 was deposited with iron, and the optimum n (Fe)/ n (Ti) is 0.25%. TiO 2 and iron deposited TiO 2 are anatase and rutile, and anatase is the dominant crystalline phase. In all samples, the XRD patterns indicate that there are no characteristic peaks of iron to be detected. XPS confirms that Fe 3+ and Fe 2+ are present on the surface of 0.5% iron deposited TiO 2, however they are not susceptible to XRD detection. The thermodynamics analysis shows that the alternative possibility of reduction from the Fe 3+ /Fe 2+ couple seems plausible, but Fe 2+ can not be reduced to Fe. The fluorescence intensity weakens after iron is deposited on TiO 2, because iron deposited traps photo generated electrons and holes. The fluorescence intensity order of TiO 2 and iron deposited TiO 2, from strong to weak, is in good agreement with that of photocatalytic reactiveness TiO 2 and iron deposited TiO 2, from low to high.

Photocatalytic degradation of organochlorine compounds using TiO_2 supported on fiberglass cloth

The feasibility of photocatalytic degradation of organochlorine compounds using TiO 2 supported on fiberglass cloth as a photocatalyst was studied. The results showed that 2 0×10 -4 mol/dm 3 of dichloroethylene, trichloroethylene and tetrachloroethylene can be completely photocatalytically degraded within a short time under illumination with a 375W medium pressure mercury lamp. The effects of parameters such as illumination time, initial concentration of organochlorine compounds, amount of air flow and concentration of H 2O 2 on the photocatalytic degradation were investigated. The TiO 2 supported on the fiberglass was not easily detached and after 500h illumination there was no significant loss of photocatalytic activity of TiO 2. The passible mechanisms of photocatalytic degradation were discussed.

Photocatalytic degradation of dichlorvos using TiO_2 supported on hollow glass microbeads

ＰｈｏｔｏｃａｔａｌｙｔｉｃｄｅｇｒａｄａｔｉｏｎｏｆｄｉｃｈｌｏｒｖｏｓｕｓｉｎｇＴｉＯ２ｓｕｐｐｏｒｔｅｄｏｎｈｏｌｏｗｇｌａｓｍｉｃｒｏｂｅａｄｓＲｅｃｅｎｔａｄｄｒｅｓ：ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＨｕａｉｂｅｉＣｏａｌＴｅ...

In situ FTIR Investigation of Magnetic Field Effect on Heterogeneous Photocatalytic Degradation of Benzene over Pt/TiO_(2)

In situ FTIR spectroscopy was utilized to investigate the magnetic field effect on the heterogeneous photocatalytic degradation of benzene over platinized titania （Pt/TiO2）. The results revealed that the employment of magnetic field may not change the mechanism of photocatalytic degradation of benzene, however, it greatly facilitate the conversion of benzene to phenol and quinone, as well as the transformation from phenol to quinone, resulting in opening the benzene ring easily and promoting the production of CO2.

Study on the Synthesis of La(3)-doped Nano-TiO_2 and Photocatalytic Degradation of Methyl Orange

In this paper,La（3）-doped Nano-TiO2（La（3）-TiO2） was synthesized via hydrothermal process.Structure and optical properties of the synthesized samples were characterized via XRD,FT-IR,DRS,etc.The results showed that the phase transformation of TiO2 from anatase to rutile was effectively prevented by La（3）-doping,which improved the thermal stability of anatase,and also suppressed particle aggregation and grain growth of TiO2.The formation of Ti-O-La bond promoted UV absorption intensity of TiO2,and provoked red shift of absorbed light.And the spectra response range of TiO2 was extended significantly to visible light by La（3）-doping,then photocatalytic performance was improved effectively.Compared with pure nano-TiO2,the performance of La（3）-TiO2 which photocatalyticly degraded methyl orange was increased significantly.

Photocatalytic Degradation of Methyl Thionine Chloride in Aqueous Solution over Nanometer (CdS/TiO_2)/MCM-41

（ CdS/ TiO2 ）/ MCM-41 loaded nanometer photocatalyst was prepared by the sol-gel method and dipping process, the photocatalytic degradation of methyl thionine chloride in water was investigated by using the photocatalyst. The experimental results show that the optimum concentration of CdS over TiO2 was 3% （ molar ratio ）, the photocatalytic activity was enhanced when making TiO2 the anatase ptase with a rise of the roasting temperature, and the carrier, mesoporous molecular sieve MCM-41, was beneficial to improving the photocatalytic activity of TiO2 for photocatalytic degradation of methyl thionine chloride. The morphology and the crystalline phase of the photocatalyst were discussed by means of XRD and SEM techniques, and the reaction mechanism of catalytic properties was also discussed.

Degradation of Rhodamine B in the photocatalytic reactor containing TiO_(2)nanotube arrays coupled with nanobubbles

Although photocatalytic technology is applied in water treatment,the challenge still exists due to its low photocatalytic performance.Herein,a photocatalytic reactor coupled with nanobubbles(NBs)is developed to degrade organic pollutants in wastewater.The reactor contains Ti mesh coated with TiO_(2)nanotube arrays as a photocatalyst.The introduction of NBs in the reactor increases the dissolved oxygen content to enhance photocatalytic performance.The photocatalytic reactor exhibits outstanding photocatalytic performance,and the degradation ability of Rhodamine B is 95.39%after 2 h of irradiation treatment.The reactor also shows excellent photodegradation performance for other organic pollutants,such as methylene blue(74.23%),tetracycline(68.68%),and oxytetracycline hydrochloride(64.10%).Radical trapping experiments further prove that·O_(2)−,h^(+)and·OH are the active species for the degradation of RhB in the photocatalytic system.Therefore,this work provides a feasible strategy to design a photocatalytic reactor coupling with nanobubbles technology for the photodegradation of organic pollutants in wastewater.

TiO_(2)/MMT复合材料降解盐酸四环素的研究

为解决抗生素废水排放带来的环境污染问题,以蒙脱土(MMT)为原料,采用水解法制备TiO_(2)/MMT复合材料,利用扫描电镜(SEM)、X射线衍射(XRD)、傅里叶红外光谱(FT-IR)和X射线光电子能谱(XPS)对TiO_(2)/MMT进行物相表征。以盐酸四环素(TC)为目标降解分子,考察了所制备的复合材料对TC的降解性能,并采用紫外-可见分光光谱(UV-vis)跟踪检测TC降解过程。物相表征表明,TiO_(2)均匀分散在MMT的表面;TiO_(2)/MMT中TiO_(2)为锐钛矿相。TiO_(2)/MMT回收样检测到N元素存在。活性数据表明,30%TiO_(2)/MMT(400℃,2 h)复合材料具有最优光催化降解TC性能,在紫外光下对100 mg/L TC的降解率达87.64%,优于纯TiO_(2)(68.74%)和纯MMT(72.22%)。循环试验6次后,催化剂对TC降解率仍达到75%,表明TiO_(2)/MMT对TC具有较高的降解活性和化学稳定性。·O_(2)^(-)和h^(+)是TiO_(2)/MMT光催化降解盐酸四环素的主要活性物质。