The surface of Titanium Hydride (TiH 2) is coated by Nano Titanium Dioxide (TiO 2) particles prepared in both of methods of hydrolysis reaction of Ti(OC 4H 9) 4 and base precipitation reaction of Ti(SO 4) 2. ...The surface of Titanium Hydride (TiH 2) is coated by Nano Titanium Dioxide (TiO 2) particles prepared in both of methods of hydrolysis reaction of Ti(OC 4H 9) 4 and base precipitation reaction of Ti(SO 4) 2. TiH 2 coated with nano TiO 2 particles, in which there is an oxidation film on its surface, shown in the experiments, will obviously achieve good effects on releasing hydrogen slowly in high temperature. There are different structures and properties of TiH 2 coated by nano TiO 2 particles prepared in different ways in high temperature, which can influence on releasing hydrogen.展开更多
A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline Ni-rich LiNixMnyCo_(z)O_(2)(x≥0.8)(NMC)particles with poly(3,4-ethylenedioxythiophene)(PEDO...A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline Ni-rich LiNixMnyCo_(z)O_(2)(x≥0.8)(NMC)particles with poly(3,4-ethylenedioxythiophene)(PEDOT).The simulation results show that the coating of primary NMC particles significantly reduces the stress generation by efficiently accommodating the volume change associated with the lithium diffusion,and the coating layer plays roles both as a cushion against the volume change and a channel for the lithium transport,promoting the lithium distribution across the secondary particles more homogeneously.Besides,the lower stiffness,higher ionic conductivity,and larger thickness of the coating layer improve the stress mitigation.This paper provides a mathematical framework for calculating the chemo-mechanical responses of anisotropic electrode materials and fundamental insights into how the coating of NMC active particles mitigates stress levels.展开更多
The capture,regeneration,and conversion of CO_(2) from ambient air and flue gas streams are critical aspects of mitigating global warming.Solid sorbents for CO_(2) absorption are very promising as they have high mass ...The capture,regeneration,and conversion of CO_(2) from ambient air and flue gas streams are critical aspects of mitigating global warming.Solid sorbents for CO_(2) absorption are very promising as they have high mass transfer areas without energy input and reduce emissions and minimize corrosion as compared to liquid sorbents.However,precisely tunable solid CO_(2) sorbents are difficult to produce.Here,we demonstrate the high-throughput production of hydrogel-based CO_(2)-absorbing particles via liquid jetting.By wrapping a liquid jet consisting of an aqueous solution of cross-linkable branched polyethylenimine(PEI)with a layer of suspension containing hydrophobic silica nanoparticles,monodisperse droplets with a silica nanoparticle coating layer was formed in the air.A stable Pickering emulsion containing PEI droplets was obtained after these ejected droplets were collected in a heated oil bath.The droplets turn into mm-sized particles after thermal curing in the bath.The diameter,PEI content,and silica content of the particles were systematically varied,and their CO_(2) absorption was measured as a function of time.Steam regeneration of the particles enabled cyclic testing,revealing a CO_(2) absorption capacity of 6.5±0.5 mol kg^(−1)solid PEI in pure CO_(2) environments and 0.7±0.3 mol kg^(−1)solid PEI for direct air capture.Several thousands of particles were produced per second at a rate of around 0.5 kg per hour,with a single nozzle.This process can be further scaled by parallelization.The complete toolbox for the design,fabrication,testing,and regeneration of functional hydrogel particles provides a powerful route toward novel solid sorbents for regenerative CO_(2) capture.展开更多
The Ni-based alloy composite coatings reinforced by nanostructured Al2O3-40%TiO2 multiphase ceramic particles were prepared on the surface of 7005 aluminum alloy by plasma spray technology. The microstructure and trib...The Ni-based alloy composite coatings reinforced by nanostructured Al2O3-40%TiO2 multiphase ceramic particles were prepared on the surface of 7005 aluminum alloy by plasma spray technology. The microstructure and tribological properties of the composite coatings were researched. The results show that the composite coatings mainly consist of γ-Ni, α-Al2O3, γ-Al2O3 and rutile-TiO2 etc, and exhibit lower friction coefficients and wear losses than the Ni-based alloy coatings at different loads and speeds. The composite coating bears low contact stress at 3 N and its wear mechanism is micro-cutting wear. As loads increase to 6-12 N, the contact stress is higher than the elastic limit stress of worn surface, and the wear mechanisms change into multi-plastic deformation wear, micro-brittle fracture wear and abrasive wear. With the increase of speeds, the contact temperature of worn surface increases. The composite coating experiences multi-plastic deformation wear, fatigue wear and adhesive wear.展开更多
The photosystem Ⅱ(PSⅡ) particles were purified by means of nano-anatase TiO_2 treatment of spinach and studied by spectroscopy. The results show that the electron transport and the oxygen-evolving rate of PSⅡ are a...The photosystem Ⅱ(PSⅡ) particles were purified by means of nano-anatase TiO_2 treatment of spinach and studied by spectroscopy. The results show that the electron transport and the oxygen-evolving rate of PSⅡ are accelerated after it has been treated with nano-anatase TiO_2; the UV-Vis absorption spectrum of PSⅡ particles is increased; the red shift of fluorescence emission peak of PSⅡ is 2 nm; the peak intensity is decreased; the PSⅡ signal Ⅱs of low temperature electron paramagnetic resonanace(EPR) spectrum is intensified under light, and the PSⅡ circular dichroism(CD) spectrum is similar to that of control. It is suggested that nano-anatase TiO_2 might bind to the PSⅡ reaction center complex and intensify the function of the PSⅡ electron donor, however, nano-anatase TiO_2 treatment does not change the configuration of the PSⅡ reaction center complex.展开更多
A series of poly(phenylenevinylene) (PPV)/titanium oxide (TiO_2)nanocomposites with different contents of TiO_2 nanoparticles were prepared from mixtures of PPVprecursor and titanium butoxide ethanol solution in a sol...A series of poly(phenylenevinylene) (PPV)/titanium oxide (TiO_2)nanocomposites with different contents of TiO_2 nanoparticles were prepared from mixtures of PPVprecursor and titanium butoxide ethanol solution in a sol- gel process. TEM images showed theformation of the connected network of TiO_2 nanoparticles with a higher content of TiO_2, whichresulted in the titanium butoxide hydrolyzed to form Ti organic compound. Meanwhile, the conjugationof PPV polymer chains can be interrupted by the TiO_2 network structure. The PL spectra revealedthat the emitted light of the PPV/TiO_2 nanocomposites blue shifted without fine structure and thePL intensity enhanced when the TiO_2 network formed. In the lifetime spectroscopy of positronannihilation, the structural properties of the PPV dominated the character of the nanocomposites, inwhich the formation of the omicron -Ps was presented in free volume polymer, when the content ofTiO_2 was below 10 percent. Further increasing the content of TiO_2 nanoparticle introduced muchmore vacancies, vacancy clusters and grain boundaries at their interfaces, which led to thecorresponding lifetime and intensity close to that of the nano- TiO_2 bulk materials. With the TiO_2content of 50 percent of long lifetime. These phenomena suggested that the optical and structuralproperties of the PPV/TiO_2 nanocomposites are dependent on the interfacial structure between PPVand TiO_2 nanoparticles.展开更多
Graphite/TiO2 composite particles were obtained by sol-gel technique in this paper. The structure and characteristic of the composite particles are analyzed by XRD, SEM and TG-DTA. The electrorheological properties of...Graphite/TiO2 composite particles were obtained by sol-gel technique in this paper. The structure and characteristic of the composite particles are analyzed by XRD, SEM and TG-DTA. The electrorheological properties of the ER fluid containing the particles were measured by a Couette-type rheometer under shear rates of 1-136 s-1 and AC electric fields of 0-3 kV/mm. The experimental results show that the leaking current density of the ER fluid is higher than that of pure titanium dioxide particles dispersed in damping oil. The shear yield stress of the ER fluid increases with increasing electric field and exhibits a typical Bingham flow behavior. The suspension demonstrates an excellent ER performance (τ/τo=1200) compared with conventional ER fluids (τ/τ0 ≤500). The sedimentation of the ER fluid is improved obviously due to the coating effect of the particles.展开更多
The microporous nanocry'sta1line TiO2 electrode with large surface roughness factor hasbeen prepared on a conducting glass support. Modification of the TiO2 electrode by in situ preparingquantum sized RuS2 particl...The microporous nanocry'sta1line TiO2 electrode with large surface roughness factor hasbeen prepared on a conducting glass support. Modification of the TiO2 electrode by in situ preparingquantum sized RuS2 particles on the surface of TiO2 electrode extends the optical absorptionspectrum and photocurrent action specmim into visible region. In addition, compared with RuS2 bulknlaterials- a blue shifi in both absorption spectrum and photocurrent action speCtrum of RuS2rriO2elcctrode is obserived and explained in terms of quantum sized effect.展开更多
化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于...化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于光催化降解不同有机污染物显得尤为重要。采用一步无模板溶剂热法合成了核壳结构的C-TiO_(2)复合材料前驱体,并在氩气气氛下煅烧得到高结晶度的C-TiO_(2)复合光催化材料。运用SEM、TEM、XRD和TG等表征手段对材料进行表征,结论如下:550℃煅烧时的样品为包含少量碳的高结晶度的锐钛矿相TiO 2,且550℃煅烧时的样品依然保持了完整的核壳结构。此外,C-TiO_(2)复合材料的比表面积高达85.69 m 2·g^(-1),平均孔径为16.4 nm以及孔体积为0.423 m 3·g^(-1)。在UV-Vis光照射下,C-TiO_(2)复合材料分别对罗丹明B(RhB)、亚甲基蓝(MB)和刚果红(CR)3种染料显示出增强的光催化降解活性。展开更多
文摘The surface of Titanium Hydride (TiH 2) is coated by Nano Titanium Dioxide (TiO 2) particles prepared in both of methods of hydrolysis reaction of Ti(OC 4H 9) 4 and base precipitation reaction of Ti(SO 4) 2. TiH 2 coated with nano TiO 2 particles, in which there is an oxidation film on its surface, shown in the experiments, will obviously achieve good effects on releasing hydrogen slowly in high temperature. There are different structures and properties of TiH 2 coated by nano TiO 2 particles prepared in different ways in high temperature, which can influence on releasing hydrogen.
基金the National Research Foundation of Korea(Nos.2018R1A5A7023490 and 2022R1A2C1003003)。
文摘A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline Ni-rich LiNixMnyCo_(z)O_(2)(x≥0.8)(NMC)particles with poly(3,4-ethylenedioxythiophene)(PEDOT).The simulation results show that the coating of primary NMC particles significantly reduces the stress generation by efficiently accommodating the volume change associated with the lithium diffusion,and the coating layer plays roles both as a cushion against the volume change and a channel for the lithium transport,promoting the lithium distribution across the secondary particles more homogeneously.Besides,the lower stiffness,higher ionic conductivity,and larger thickness of the coating layer improve the stress mitigation.This paper provides a mathematical framework for calculating the chemo-mechanical responses of anisotropic electrode materials and fundamental insights into how the coating of NMC active particles mitigates stress levels.
基金supported by the European Regional Development Fund(CONTROL,EFRO#00943).
文摘The capture,regeneration,and conversion of CO_(2) from ambient air and flue gas streams are critical aspects of mitigating global warming.Solid sorbents for CO_(2) absorption are very promising as they have high mass transfer areas without energy input and reduce emissions and minimize corrosion as compared to liquid sorbents.However,precisely tunable solid CO_(2) sorbents are difficult to produce.Here,we demonstrate the high-throughput production of hydrogel-based CO_(2)-absorbing particles via liquid jetting.By wrapping a liquid jet consisting of an aqueous solution of cross-linkable branched polyethylenimine(PEI)with a layer of suspension containing hydrophobic silica nanoparticles,monodisperse droplets with a silica nanoparticle coating layer was formed in the air.A stable Pickering emulsion containing PEI droplets was obtained after these ejected droplets were collected in a heated oil bath.The droplets turn into mm-sized particles after thermal curing in the bath.The diameter,PEI content,and silica content of the particles were systematically varied,and their CO_(2) absorption was measured as a function of time.Steam regeneration of the particles enabled cyclic testing,revealing a CO_(2) absorption capacity of 6.5±0.5 mol kg^(−1)solid PEI in pure CO_(2) environments and 0.7±0.3 mol kg^(−1)solid PEI for direct air capture.Several thousands of particles were produced per second at a rate of around 0.5 kg per hour,with a single nozzle.This process can be further scaled by parallelization.The complete toolbox for the design,fabrication,testing,and regeneration of functional hydrogel particles provides a powerful route toward novel solid sorbents for regenerative CO_(2) capture.
文摘The Ni-based alloy composite coatings reinforced by nanostructured Al2O3-40%TiO2 multiphase ceramic particles were prepared on the surface of 7005 aluminum alloy by plasma spray technology. The microstructure and tribological properties of the composite coatings were researched. The results show that the composite coatings mainly consist of γ-Ni, α-Al2O3, γ-Al2O3 and rutile-TiO2 etc, and exhibit lower friction coefficients and wear losses than the Ni-based alloy coatings at different loads and speeds. The composite coating bears low contact stress at 3 N and its wear mechanism is micro-cutting wear. As loads increase to 6-12 N, the contact stress is higher than the elastic limit stress of worn surface, and the wear mechanisms change into multi-plastic deformation wear, micro-brittle fracture wear and abrasive wear. With the increase of speeds, the contact temperature of worn surface increases. The composite coating experiences multi-plastic deformation wear, fatigue wear and adhesive wear.
文摘The photosystem Ⅱ(PSⅡ) particles were purified by means of nano-anatase TiO_2 treatment of spinach and studied by spectroscopy. The results show that the electron transport and the oxygen-evolving rate of PSⅡ are accelerated after it has been treated with nano-anatase TiO_2; the UV-Vis absorption spectrum of PSⅡ particles is increased; the red shift of fluorescence emission peak of PSⅡ is 2 nm; the peak intensity is decreased; the PSⅡ signal Ⅱs of low temperature electron paramagnetic resonanace(EPR) spectrum is intensified under light, and the PSⅡ circular dichroism(CD) spectrum is similar to that of control. It is suggested that nano-anatase TiO_2 might bind to the PSⅡ reaction center complex and intensify the function of the PSⅡ electron donor, however, nano-anatase TiO_2 treatment does not change the configuration of the PSⅡ reaction center complex.
文摘A series of poly(phenylenevinylene) (PPV)/titanium oxide (TiO_2)nanocomposites with different contents of TiO_2 nanoparticles were prepared from mixtures of PPVprecursor and titanium butoxide ethanol solution in a sol- gel process. TEM images showed theformation of the connected network of TiO_2 nanoparticles with a higher content of TiO_2, whichresulted in the titanium butoxide hydrolyzed to form Ti organic compound. Meanwhile, the conjugationof PPV polymer chains can be interrupted by the TiO_2 network structure. The PL spectra revealedthat the emitted light of the PPV/TiO_2 nanocomposites blue shifted without fine structure and thePL intensity enhanced when the TiO_2 network formed. In the lifetime spectroscopy of positronannihilation, the structural properties of the PPV dominated the character of the nanocomposites, inwhich the formation of the omicron -Ps was presented in free volume polymer, when the content ofTiO_2 was below 10 percent. Further increasing the content of TiO_2 nanoparticle introduced muchmore vacancies, vacancy clusters and grain boundaries at their interfaces, which led to thecorresponding lifetime and intensity close to that of the nano- TiO_2 bulk materials. With the TiO_2content of 50 percent of long lifetime. These phenomena suggested that the optical and structuralproperties of the PPV/TiO_2 nanocomposites are dependent on the interfacial structure between PPVand TiO_2 nanoparticles.
基金The authors are thankful to the support of the National Natural Science Foundation of China(Grant No.50135030).
文摘Graphite/TiO2 composite particles were obtained by sol-gel technique in this paper. The structure and characteristic of the composite particles are analyzed by XRD, SEM and TG-DTA. The electrorheological properties of the ER fluid containing the particles were measured by a Couette-type rheometer under shear rates of 1-136 s-1 and AC electric fields of 0-3 kV/mm. The experimental results show that the leaking current density of the ER fluid is higher than that of pure titanium dioxide particles dispersed in damping oil. The shear yield stress of the ER fluid increases with increasing electric field and exhibits a typical Bingham flow behavior. The suspension demonstrates an excellent ER performance (τ/τo=1200) compared with conventional ER fluids (τ/τ0 ≤500). The sedimentation of the ER fluid is improved obviously due to the coating effect of the particles.
文摘The microporous nanocry'sta1line TiO2 electrode with large surface roughness factor hasbeen prepared on a conducting glass support. Modification of the TiO2 electrode by in situ preparingquantum sized RuS2 particles on the surface of TiO2 electrode extends the optical absorptionspectrum and photocurrent action specmim into visible region. In addition, compared with RuS2 bulknlaterials- a blue shifi in both absorption spectrum and photocurrent action speCtrum of RuS2rriO2elcctrode is obserived and explained in terms of quantum sized effect.
文摘化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于光催化降解不同有机污染物显得尤为重要。采用一步无模板溶剂热法合成了核壳结构的C-TiO_(2)复合材料前驱体,并在氩气气氛下煅烧得到高结晶度的C-TiO_(2)复合光催化材料。运用SEM、TEM、XRD和TG等表征手段对材料进行表征,结论如下:550℃煅烧时的样品为包含少量碳的高结晶度的锐钛矿相TiO 2,且550℃煅烧时的样品依然保持了完整的核壳结构。此外,C-TiO_(2)复合材料的比表面积高达85.69 m 2·g^(-1),平均孔径为16.4 nm以及孔体积为0.423 m 3·g^(-1)。在UV-Vis光照射下,C-TiO_(2)复合材料分别对罗丹明B(RhB)、亚甲基蓝(MB)和刚果红(CR)3种染料显示出增强的光催化降解活性。
