Time delay and integration （TDI） charge coupled device （CCD） noise sets a fundamental limit on image sensor performance, especially under low illumination in remote sensing applications. After introducing the comp...Time delay and integration （TDI） charge coupled device （CCD） noise sets a fundamental limit on image sensor performance, especially under low illumination in remote sensing applications. After introducing the complete sources of CCD noise, we study the effects of TDI operation mode on noise, and the relationship between different types of noise and number of the TDI stage. Then we propose a new technique to identify and measure sources of TDI CCD noise employing mathematical statistics theory, where theoretical analysis shows that noise estimated formulation converges well. Finally, we establish a testing platform to carry out experiments, and a standard TDI CCD is calibrated by using the proposed method. The experimental results show that the noise analysis and measurement methods presented in this paper are useful for modeling TDI CCDs.展开更多
Finite element（FE） is a powerful tool and has been applied by investigators to real-time hybrid simulations（RTHSs）. This study focuses on the computational efficiency, including the computational time and accuracy...Finite element（FE） is a powerful tool and has been applied by investigators to real-time hybrid simulations（RTHSs）. This study focuses on the computational efficiency, including the computational time and accuracy, of numerical integrations in solving FE numerical substructure in RTHSs. First, sparse matrix storage schemes are adopted to decrease the computational time of FE numerical substructure. In this way, the task execution time（TET） decreases such that the scale of the numerical substructure model increases. Subsequently, several commonly used explicit numerical integration algorithms, including the central difference method（CDM）, the Newmark explicit method, the Chang method and the Gui-λ method, are comprehensively compared to evaluate their computational time in solving FE numerical substructure. CDM is better than the other explicit integration algorithms when the damping matrix is diagonal, while the Gui-λ（λ = 4） method is advantageous when the damping matrix is non-diagonal. Finally, the effect of time delay on the computational accuracy of RTHSs is investigated by simulating structure-foundation systems. Simulation results show that the influences of time delay on the displacement response become obvious with the mass ratio increasing, and delay compensation methods may reduce the relative error of the displacement peak value to less than 5% even under the large time-step and large time delay.展开更多
An extended car-following model with multiple delays is constructed to describe driver's driving behavior.Through stability analysis,the stability condition of this uncontrolled model is given.To dampen the negati...An extended car-following model with multiple delays is constructed to describe driver's driving behavior.Through stability analysis,the stability condition of this uncontrolled model is given.To dampen the negative impact of the driver's multiple delays(i.e.,stability condition is not satisfied),a novel control strategy is proposed to assist the driver in adjusting vehicle operation.The control strategy consists of two parts:the design of control term as well as the design of the parameters in the term.Bifurcation analysis is performed to illustrate the necessity of the design of parameters in control terms.In the course of the design of parameters in the control term,we improve the definite integral stability method to reduce the iterations by incorporating the characteristics of bifurcation,which can determine the appropriate parameters in the control terms more quickly.Finally,in the case study,we validate the control strategy by utilizing measured data and configuring scenario,which is closer to the actual traffic.The results of validation show that the control strategy can effectively stabilize the unstable traffic flow caused by driver's delays.展开更多
Due to the widespread application of the PID controller in industrial control systems, it is desirable to know the complete set of all the stabilizing PID controllers for a given plant before the controller design and...Due to the widespread application of the PID controller in industrial control systems, it is desirable to know the complete set of all the stabilizing PID controllers for a given plant before the controller design and tuning. In this paper, the stabilization problems of the classical proportionalintegral-derivative （PID） controller and the singleparameter PID controller （containing only one adjustable parameter） for integral processes with time delay are investigated, respectively. The complete set of stabilizing parameters of the classical PID controller is determined using a version of the Hermite-Biehler Theorem applicable to quasipolynomials. Since the stabilization problem of the singie-parameter PID controller cannot be treated by the Hermite-Biehler Theorem, a simple method called duallocus diagram is employed to derive the stabilizing range of the single-parameter PID controller. These results provide insight into the tuning of the PID controllers.展开更多
A simple algorithm is proposed for step-by-step time integration of stiff ODEs in Chemical Kinetics. No predictor-corrector technique is used within each step of the algorithm. It is assumed that species concentration...A simple algorithm is proposed for step-by-step time integration of stiff ODEs in Chemical Kinetics. No predictor-corrector technique is used within each step of the algorithm. It is assumed that species concentrations less than 10-6 mol·L-1 do not activate any chemical reaction. So, within each step, the time steplength Δt of the algorithm is determined from the fastest reaction rate maxR by the formula Δt = 10-6mol·L-1/max R. All the reversible elementary reactions occur simultaneously;however, by a simple book-keeping technique, the updating of species concentrations, within each step of the algorithm, is performed within each elementary reaction separately. The above proposed simple algorithm for Chemical Kinetics is applied to a simple model for hydrogen combustion with only five reversible elementary reactions (Initiation, Propagation, First and Second Branching, Termination by wall destruction) with six species (H2, O2, H, O, HO, H2O). These five reversible reactions are recommended in the literature as the most significant elementary reactions of hydrogen combustion [1] [2]. Based on the proposed here simple algorithm for Chemical Kinetics, applied to the global mechanism of proposed five reversible elementary reactions for hydrogen combustion, a simple and short computer program has been developed with only about 120 Fortran instructions. By this proposed program, the following are obtained: 1) The total species concentration of hydrogen combustion, starting from the sum of initial reactants concentrations [H2] + [O2], gradually diminishes, due to termination reaction by wall destruction, and tends to the final concentration of the product [H2O], that is to the 2/3 of its initial value, in accordance to the established overall stoichiometric reaction of hydrogen combustion 2H2 + O2 → 2H2O. 2) Time-histories for concentrations of main species H2, O2, H, H2O of hydrogen combustion, in explosion and equilibrium regions, obtained by the proposed program, are compared to corresponding ones obtained by accurate computational studies of [3]. 3) In the first step of the algorithm, the only nonzero species concentrations are those of reactants [H2], [O2]. So, the maximum reaction rate is that of the forward initiation reaction max R = Rif = kif[H2] [O2], where the rate constant kif is very slow. Thus, the first time steplength Δt1 = 10-6mol·L-1/max R results long in sec. After the first step, the sequences of all the following Δt’s are very short, in μsec. So, the first time steplength Δt1 can be considered as ignition delay time. 4) It is assumed that explosion corresponds to ignition delay time Δt1 t1 = 10 sec., can be considered as explosion limit curve. This curve is compared to the corresponding one obtained by the accurate computational studies of [2].展开更多
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2006AA06A208)
文摘Time delay and integration （TDI） charge coupled device （CCD） noise sets a fundamental limit on image sensor performance, especially under low illumination in remote sensing applications. After introducing the complete sources of CCD noise, we study the effects of TDI operation mode on noise, and the relationship between different types of noise and number of the TDI stage. Then we propose a new technique to identify and measure sources of TDI CCD noise employing mathematical statistics theory, where theoretical analysis shows that noise estimated formulation converges well. Finally, we establish a testing platform to carry out experiments, and a standard TDI CCD is calibrated by using the proposed method. The experimental results show that the noise analysis and measurement methods presented in this paper are useful for modeling TDI CCDs.
基金National Natural Science Foundation of China under Grant Nos.51639006 and 51725901
文摘Finite element（FE） is a powerful tool and has been applied by investigators to real-time hybrid simulations（RTHSs）. This study focuses on the computational efficiency, including the computational time and accuracy, of numerical integrations in solving FE numerical substructure in RTHSs. First, sparse matrix storage schemes are adopted to decrease the computational time of FE numerical substructure. In this way, the task execution time（TET） decreases such that the scale of the numerical substructure model increases. Subsequently, several commonly used explicit numerical integration algorithms, including the central difference method（CDM）, the Newmark explicit method, the Chang method and the Gui-λ method, are comprehensively compared to evaluate their computational time in solving FE numerical substructure. CDM is better than the other explicit integration algorithms when the damping matrix is diagonal, while the Gui-λ（λ = 4） method is advantageous when the damping matrix is non-diagonal. Finally, the effect of time delay on the computational accuracy of RTHSs is investigated by simulating structure-foundation systems. Simulation results show that the influences of time delay on the displacement response become obvious with the mass ratio increasing, and delay compensation methods may reduce the relative error of the displacement peak value to less than 5% even under the large time-step and large time delay.
基金Project supported by the Natural Science Foundation of Zhejiang Province,China(Grant No.LY20G010004)the Program of Humanities and Social Science of Education Ministry of China(Grant No.20YJA630008)+1 种基金the National Key Research and Development Program of China–Traffic Modeling,Surveillance and Control with Connected&Automated Vehicles(Grant No.2017YFE9134700)the K.C.Wong Magna Fund in Ningbo University,China。
文摘An extended car-following model with multiple delays is constructed to describe driver's driving behavior.Through stability analysis,the stability condition of this uncontrolled model is given.To dampen the negative impact of the driver's multiple delays(i.e.,stability condition is not satisfied),a novel control strategy is proposed to assist the driver in adjusting vehicle operation.The control strategy consists of two parts:the design of control term as well as the design of the parameters in the term.Bifurcation analysis is performed to illustrate the necessity of the design of parameters in control terms.In the course of the design of parameters in the control term,we improve the definite integral stability method to reduce the iterations by incorporating the characteristics of bifurcation,which can determine the appropriate parameters in the control terms more quickly.Finally,in the case study,we validate the control strategy by utilizing measured data and configuring scenario,which is closer to the actual traffic.The results of validation show that the control strategy can effectively stabilize the unstable traffic flow caused by driver's delays.
基金National Science Foundation of China （60274032） SRFDP （20030248040） SRSP （04QMH1405）
文摘Due to the widespread application of the PID controller in industrial control systems, it is desirable to know the complete set of all the stabilizing PID controllers for a given plant before the controller design and tuning. In this paper, the stabilization problems of the classical proportionalintegral-derivative （PID） controller and the singleparameter PID controller （containing only one adjustable parameter） for integral processes with time delay are investigated, respectively. The complete set of stabilizing parameters of the classical PID controller is determined using a version of the Hermite-Biehler Theorem applicable to quasipolynomials. Since the stabilization problem of the singie-parameter PID controller cannot be treated by the Hermite-Biehler Theorem, a simple method called duallocus diagram is employed to derive the stabilizing range of the single-parameter PID controller. These results provide insight into the tuning of the PID controllers.
文摘A simple algorithm is proposed for step-by-step time integration of stiff ODEs in Chemical Kinetics. No predictor-corrector technique is used within each step of the algorithm. It is assumed that species concentrations less than 10-6 mol·L-1 do not activate any chemical reaction. So, within each step, the time steplength Δt of the algorithm is determined from the fastest reaction rate maxR by the formula Δt = 10-6mol·L-1/max R. All the reversible elementary reactions occur simultaneously;however, by a simple book-keeping technique, the updating of species concentrations, within each step of the algorithm, is performed within each elementary reaction separately. The above proposed simple algorithm for Chemical Kinetics is applied to a simple model for hydrogen combustion with only five reversible elementary reactions (Initiation, Propagation, First and Second Branching, Termination by wall destruction) with six species (H2, O2, H, O, HO, H2O). These five reversible reactions are recommended in the literature as the most significant elementary reactions of hydrogen combustion [1] [2]. Based on the proposed here simple algorithm for Chemical Kinetics, applied to the global mechanism of proposed five reversible elementary reactions for hydrogen combustion, a simple and short computer program has been developed with only about 120 Fortran instructions. By this proposed program, the following are obtained: 1) The total species concentration of hydrogen combustion, starting from the sum of initial reactants concentrations [H2] + [O2], gradually diminishes, due to termination reaction by wall destruction, and tends to the final concentration of the product [H2O], that is to the 2/3 of its initial value, in accordance to the established overall stoichiometric reaction of hydrogen combustion 2H2 + O2 → 2H2O. 2) Time-histories for concentrations of main species H2, O2, H, H2O of hydrogen combustion, in explosion and equilibrium regions, obtained by the proposed program, are compared to corresponding ones obtained by accurate computational studies of [3]. 3) In the first step of the algorithm, the only nonzero species concentrations are those of reactants [H2], [O2]. So, the maximum reaction rate is that of the forward initiation reaction max R = Rif = kif[H2] [O2], where the rate constant kif is very slow. Thus, the first time steplength Δt1 = 10-6mol·L-1/max R results long in sec. After the first step, the sequences of all the following Δt’s are very short, in μsec. So, the first time steplength Δt1 can be considered as ignition delay time. 4) It is assumed that explosion corresponds to ignition delay time Δt1 t1 = 10 sec., can be considered as explosion limit curve. This curve is compared to the corresponding one obtained by the accurate computational studies of [2].
