Quantitative analysis of laser-generated ultrasonic wave characteristics and their correlation with grain size in polycrystalline materials

Quantitative relationship between nanosecond pulsed laser parameters and the characteristics of laser-generated ultrasonic waves in polycrystalline materials was evaluated.The high energy of the pulsed laser with a large irradiation spot simultaneously generated ultrasonic longitudinal and shear waves at the epicenter under the slight ablation regime.An optimized denoising technique based on wavelet thresholding and variational mode decomposition was applied to reduce noise in shear waves with a low signal-to-noise ratio.An approach for characterizing grain size was proposed using spectral central frequency ratio(SCFR)based on time-frequency analysis.The results demonstrate that the generation regime of ultrasonic waves is not solely determined by the laser power density;even at high power densities,a high energy with a large spot can generate an ultrasonic waveform dominated by the thermoelastic effect.This is ascribed to the intensification of the thermoelastic effect with the proportional increase in laser irradiation spot area for a given laser power density.Furthermore,both longitudinal and shear wave SCFRs are linearly related to grain size in polycrystalline materials;however,the shear wave SCFR is more sensitive to finer-grained materials.This study holds great significance for evaluating metal material properties using laser ultrasound.

The W transform and its improved methods for time-frequency analysis of seismic data

The conventional linear time-frequency analysis method cannot achieve high resolution and energy focusing in the time and frequency dimensions at the same time,especially in the low frequency region.In order to improve the resolution of the linear time-frequency analysis method in the low-frequency region,we have proposed a W transform method,in which the instantaneous frequency is introduced as a parameter into the linear transformation,and the analysis time window is constructed which matches the instantaneous frequency of the seismic data.In this paper,the W transform method is compared with the Wigner-Ville distribution(WVD),a typical nonlinear time-frequency analysis method.The WVD method that shows the energy distribution in the time-frequency domain clearly indicates the gravitational center of time and the gravitational center of frequency of a wavelet,while the time-frequency spectrum of the W transform also has a clear gravitational center of energy focusing,because the instantaneous frequency corresponding to any time position is introduced as the transformation parameter.Therefore,the W transform can be benchmarked directly by the WVD method.We summarize the development of the W transform and three improved methods in recent years,and elaborate on the evolution of the standard W transform,the chirp-modulated W transform,the fractional-order W transform,and the linear canonical W transform.Through three application examples of W transform in fluvial sand body identification and reservoir prediction,it is verified that W transform can improve the resolution and energy focusing of time-frequency spectra.

Effect of FeSi additive in dual-chamber sample cup on thermal analysis characteristic values and vermiculating rate of compacted graphite iron

Thermal analysis plays a key role in the online inspection of molten iron quality.Different solidification process of molten iron can be reflected by thermal analysis curves,and silicon is one of important elements affecting the solidification of molten iron.In this study,FeSi75 was added in one chamber of the dual-chamber sample cup,and the influences of FeSi75 additive on the characteristic values of thermal analysis curves and vermiculating rate were investigated.The results show that with the increase of FeSi75,the start temperature of austenite formation TALfirstly decreases and then increases,but the start temperature of eutectic growth TSEF,the lowest eutectic temperature TEU,temperature at maximum eutectic reaction rate TEM,and highest eutectic temperature TERkeep always an increase.The temperature at final solidification point TEShas little change.The FeSi75 additive has different influences on the vermiculating rate of molten iron with different vermiculation,and the vermiculating rate increases for lower vermiculation molten iron while decreases for higher one.According to the thermal analysis curves obtained by a dual-chamber sample cup with 0.30wt.%FeSi75 additive in one chamber,the vermiculating rate of molten iron can be evaluated by comparing the characteristic values of these curves.The time differenceΔtERcorresponding to the highest eutectic temperature TERhas a closer relationship with the vermiculating rate,and a parabolic regression curve between the time differenceΔtERand vermiculating rateηhas been obtained within the range of 65%to 95%,which is suitable for the qualified melt.

Numerical Analysis of Explosion Characteristics of Vent Gas From 18650 LiFePO_(4) Batteries With Different States of Charge

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries.Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles,thereby promoting the application and development of lithium-ion batteries.Based on this understanding and combined with previous research on gas production from lithium-ion batteries,this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of charge(SOCs).The explosion limit of mixed gases affected by carbon dioxide inert gas is calculated through the“elimination”method,and the Chemkin-Pro software is used to numerically simulate the laminar flame speed and adiabatic flame temperature of the battery vent gas.And the concentration of free radicals and sensitivity coefficients of major elementary reactions in the system are analyzed to comprehensively evaluate the combustion explosion hazard of battery vent gas.The study found that the 100%SOC battery has the lowest explosion limit of the vent gas.The inhibitory elementary reaction sensitivity coefficient in the reaction system is lower and the concentration of free radicals is higher.Therefore,it has the maximum laminar flame speed and adiabatic flame temperature.The combustion and explosion hazard of battery vent gas increases with the increase of SOC,and the risk of explosion is the greatest and most harmful when SOC reaches 100%.However,the related hazards decrease to varying degrees with overcharging of the battery.This article provides a feasible method for analyzing the combustion mechanism of vent gas from lithium-ion batteries,revealing the impact of SOC on the hazardousness of battery vent gas.It provides references for the safety of storage and transportation of lithium-ion batteries,safety protection of energy storage stations,and the selection of related fire extinguishing agents.

Analysis and Research on Aerodynamic Characteristics of Quad Tilt Rotor Aircraft

For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of the quad tilt rotor aircraft. Firstly, a numerical simulation method for the interference flow field of the quad tilt rotor aircraft is established. Based on this method, the aerodynamic characteristics of isolated rotors, rotor combinations at different lateral positions on the wing, and rotor rotation directions under different inflow velocities were calculated and analyzed, in order to grasp their aerodynamic interference laws and provide reference for the design and control theory research of such aircraft.

Blast wave characteristics of multi-layer composite charge:Theoretical analysis,numerical simulation,and experimental validation

This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the charge,a peak overpressure prediction model for the composite charge under singlepoint detonation and simultaneous detonation was established.The effects of the charge structure and initiation method on the overpressure field characteristics were investigated in AUTODYN simulation.The accuracy of the prediction model and the reliability of the numerical simulation method were subsequently verified in a series of static explosion experiments.The results reveal that the mass of the inner charge was the key factor determining the peak overpressure of the composite charge under single-point detonation.The peak overpressure in the radial direction improved apparently with an increase in the aspect ratio of the charge.The overpressure curves in the axial direction exhibited a multi-peak phenomenon,and the secondary peak overpressure even exceeded the primary peak at distances of 30D and 40D(where D is the charge diameter).The difference in peak overpressure among azimuth angles of 0-90°gradually decreased with an increase in the propagation distance of the shock wave.The coupled effect of the detonation energy of the inner and outer charge under simultaneous detonation improved the overpressure in both radial and axial directions.The difference in peak overpressure obtained from model prediction and experimental measurements was less than 16.4%.

Detection and characteristics analysis of the western subarctic front using the high-resolution SST product

Oceanic front plays a significant role in the ocean vertical mixing and the regulation of air-sea interaction,among others.The western branch of the subarctic front(WSAF)located in the Northwest Pacific has attained lots of attention given its strong intensity and widespread influence on this region.In this study,we take advantage of the merged sea surface temperature(SST)at a high spatial resolution of 0.05°to investigate the characteristics of WSAF.The front detection algorithm that combines the Sobel operator and histogram analysis is adopted.It is advantageous in both preserving the front intensity represented by the SST gradient as well as reducing the detection noise level.We systematically applied this algorithm to the daily SST products for front detection,based on which the WSAF characteristics including its intensity,occurrence of frequency,latitudinal position and coverage area are then extracted.WSAF is mostly located within a small latitude range between 40°N and 41°N with a clear seasonal trend in its intensity that peaks in the winter and troughs in the summer.The seasonal variation of WSAF intensity is almost consistent throughout the temporal period of interest from 2010 to 2018.Similar seasonality is observed for its occurrence of frequency with the winter-summer contrast reaching up to5%.The findings presented here shall help better interpret the WSAF characteristics in the long-term run as well as their impact on the regional weather and climate patterns at high spatial resolution.

Research on Low Voltage Series Arc Fault Prediction Method Based on Multidimensional Time-Frequency Domain Characteristics

The load types in low-voltage distribution systems are diverse.Some loads have current signals that are similar to series fault arcs,making it difficult to effectively detect fault arcs during their occurrence and sustained combustion,which can easily lead to serious electrical fire accidents.To address this issue,this paper establishes a fault arc prototype experimental platform,selects multiple commonly used loads for fault arc experiments,and collects data in both normal and fault states.By analyzing waveform characteristics and selecting fault discrimination feature indicators,corresponding feature values are extracted for qualitative analysis to explore changes in timefrequency characteristics of current before and after faults.Multiple features are then selected to form a multidimensional feature vector space to effectively reduce arc misjudgments and construct a fault discrimination feature database.Based on this,a fault arc hazard prediction model is built using random forests.The model’s multiple hyperparameters are simultaneously optimized through grid search,aiming tominimize node information entropy and complete model training,thereby enhancing model robustness and generalization ability.Through experimental verification,the proposed method accurately predicts and classifies fault arcs of different load types,with an average accuracy at least 1%higher than that of the commonly used fault predictionmethods compared in the paper.

Analysis of Morphometric Parameters and Radioactive Characteristics Using Remote Sensing Data and GIS Techniques in the Wadi Wizr Basin Area, Central Eastern Desert, Egypt

The purpose of this study is to demonstrate how modern technologies such as geographic information systems (GIS) and digital elevation models can help in the creation of a geographic database for the Wadi Wizr basin in Egypt’s Central Eastern Desert, in addition to examining and analysing the radioactive properties of various rocks. This was accomplished with the help of a digital elevation model (DEM) with a 30 metre accuracy and GIS software in 10.8 Arc Map. The RS-230 was also used to measure uranium and thorium concentrations. GIS softwares and digital elevation models have been shown to be more effective than the traditional method. This was demonstrated by the flexible and quick working method, the accuracy of the parameters used, and the results of the morphometric analysis of the basin river network. In addition to, the main drainage pattern from subtype to tree type, where the branching ratio was (1.59). This basin could also cause flooding. Similar studies, according to the results of this study, should make greater use of geographic information system technology and modern data sources. Wadi Wizr also has a radioactive anomaly, with uranium equivalent concentrations reaching 70 ppm in some fault parts.

Analysis on Climatic Characteristics of High Temperature Weather in Longdong Region

Using meteorological data from 8 national basic meteorological observation stations in Qingyang City of Longdong region from 1972 to 2021,the causes and change characteristics of high-temperature weather were analyzed,and targeted countermeasures and suggestions were proposed for residents' production,life,and energy security supply affected by high-temperature weather.The results showed that①affected by global warming,the annual average temperature,annual average maximum temperature,annual extreme maximum temperature,days of daily maximum temperature≥30℃,and days of daily maximum temperature≥35℃in Longdong region were all showing an upward trend;②due to the different terrain and soil properties of the underlying surface,the increase in high temperature weather varied in different regions.Due to the influence of desert and hilly terrain,the frequency and days of high temperature occurrence were relatively high in the central and northern parts of Qingyang City.Due to the climate regulation of the Ziwuling Mountains,the days of high temperature in the central and southern parts was significantly less than that in the central and northern parts;③if the warm high pressure ridge on the Qinghai-Tibet Plateau developed strongly in summer,the temperature of the closed warm center reached 0-4℃on the 500 hPa of high-altitude weather map.If the warm air mass developed eastward,it often led to sustained high temperature weather in Longdong region;④when the El Nino phenomenon occurred,the subtropical high in the western Pacific developed strongly in summer,with a center located northward,which was stable,with little movement.It was dry,sunny,hot,and rainless in Longdong region,and the high temperature weather was more significant than that in normal years.

Analysis on the Variation Characteristics of Precipitation in North China during Recent 30 Years

Based on the monthly precipitation data from 43 stations in North China from 1979 to 2008,the variation characteristics of precipitation in North China in recent 30 years were analyzed by means of empirical orthogonal function(EOF)decomposition,Morlet wavelet transform and Mann-Kendall test.The results showed that the spatial distribution of annual and seasonal precipitation was basically identical in North China,while the annual and summer precipitation from the middle of 1980s to the middle of 1990s were obviously more than these in other periods,and there was great annual variation in spring precipitation in 1990s,while autumn precipitation was higher from 1980s to 1990s and then went down after the beginning of 21st century,which was opposite to winter precipitation,namely there was more winter precipitation from 1980s to 1990s and fewer winter precipitation after the beginning of 21st century.In addition,the annual and summer precipitation changed abruptly in 1997,and there was no obvious change in spring precipitation and autumn precipitation,while winter precipitation had an abrupt change in 2000.Meanwhile,wavelet analysis revealed that the variation period of annual and seasonal precipitation was 3-4 years.

The analysis of frequency-dependent characteristics for fluid detection: a physical model experiment

According to the Chapman multi-scale rock physical model, the seismic response characteristics vary for different fluid-saturated reservoirs. For class I AVO reservoirs and gas-saturation, the seismic response is a high-frequency bright spot as the amplitude energy shifts. However, it is a low-frequency shadow for the Class III AVO reservoirs saturated with hydrocarbons. In this paper, we verified the high-frequency bright spot results of Chapman for the Class I AVO response using the frequency-dependent analysis of a physical model dataset. The physical model is designed as inter-bedded thin sand and shale based on real field geology parameters. We observed two datasets using fixed offset and 2D geometry with different fluid- saturated conditions. Spectral and time-frequency analyses methods are applied to the seismic datasets to describe the response characteristics for gas-, water-, and oil-saturation. The results of physical model dataset processing and analysis indicate that reflection wave tuning and fluid-related dispersion are the main seismic response characteristic mechanisms. Additionally, the gas saturation model can be distinguished from water and oil saturation for Class I AVO utilizing the frequency-dependent abnormal characteristic. The frequency-dependent characteristic analysis of the physical model dataset verified the different spectral response characteristics corresponding to the different fluid-saturated models. Therefore, by careful analysis of real field seismic data, we can obtain the abnormal spectral characteristics induced by the fluid variation and implement fluid detection using seismic data directly.

Characteristic Analysis of the Temperature Variation in Baoji City in Past 52 Years

The characteristics of the temperature variation in Baoji City were analyzed with the temperature data from 1952 to 2003.The results showed that the value of annual average temperature and seasonal average temperature wavily rose before 1980 and obviously ascended after 1980.During the period of last 52 years,there was a process of ascent-descent-ascent in summer seasonal temperature variation.While in autumn and winter,the temperature decreased at first and then increased.The steady ascent of the temperature in summer season had a great contribution to the increment of its average temperature.The type of the variation trend in the average temperature in Baoji in recent 52 years was verified according to the results.

Model reduction of fractional impedance spectra for time–frequency analysis of batteries, fuel cells, and supercapacitors

Joint time–frequency analysis is an emerging method for interpreting the underlying physics in fuel cells,batteries,and supercapacitors.To increase the reliability of time–frequency analysis,a theoretical correlation between frequency-domain stationary analysis and time-domain transient analysis is urgently required.The present work formularizes a thorough model reduction of fractional impedance spectra for electrochemical energy devices involving not only the model reduction from fractional-order models to integer-order models and from high-to low-order RC circuits but also insight into the evolution of the characteristic time constants during the whole reduction process.The following work has been carried out:(i)the model-reduction theory is addressed for typical Warburg elements and RC circuits based on the continued fraction expansion theory and the response error minimization technique,respectively;(ii)the order effect on the model reduction of typical Warburg elements is quantitatively evaluated by time–frequency analysis;(iii)the results of time–frequency analysis are confirmed to be useful to determine the reduction order in terms of the kinetic information needed to be captured;and(iv)the results of time–frequency analysis are validated for the model reduction of fractional impedance spectra for lithium-ion batteries,supercapacitors,and solid oxide fuel cells.In turn,the numerical validation has demonstrated the powerful function of the joint time–frequency analysis.The thorough model reduction of fractional impedance spectra addressed in the present work not only clarifies the relationship between time-domain transient analysis and frequency-domain stationary analysis but also enhances the reliability of the joint time–frequency analysis for electrochemical energy devices.

Analysis of the Characteristics of Typical Haze in Winter

Based on meteorology and environment monitoring data in January,2008 in Liaoning central region,a typical haze weather process was analyzed.The results showed that haze was formed due to the stable weather condition in the earth surface and upper air layer in Liaoning central region.Especially because that the weakening of atmospheric dispersion ability in the urban boundary layer that was 500 m under earth surface,caused the pollutant in the air can not disperse.Thus,it resulted in the deterioration of air quality,increase of concentration of particulate mass,and declination of visibility.And in the end,haze formed.

Morphological Characteristics Analysis of 11 Broom Sorghum Varieties

[Objective] To provide a theoretical basis for high-yield breeding of broom sorghum.[Method] Using 11 kinds of broom sorghum collected at home as research objects, the differences in morphological characteristics of broom sorghum were compared through the survey of some indicators, such as plant height, tillering, inflorescence, stem node, stem-leaf ratio, yield, and so on. [Result] The 11 kinds of broom sorghum were different in morphological characteristics with large amplitude of plant height; zygl-1, zygl-6, zygl-8 and zygl-9 were appropriate for fixed broom type; zygl-9 had the highest integrated production. [Condusion] The study laid the foundation for further exploring breeding, cultivation and promotion of broom sorghum.

Cluster Analysis of Morphologic Characteristic of Eight Geographical Populations of Rana Dybowskii

[ObJective] The research aimed to determine the geographic distribution map of system of Rana dybowskii. [Method] Four morphologic indices （body length, body weight, forelimb length, hindlimb length） of eight geographical populations of R.dybowskii which naturally distribute in Changhai Mountain and Xiaoxing＇an Mountain were measured. Measure results were variance analyzed and cluster analyzed. [Result] Variance analysis showed： the genetic branching among the Dongfanghong male population（ belongs to Wandashan） and Xiaoxing＇an Mountain male population and Changbai Mountain male population were significantly different （P〈0.05） ; the genetic branching between the Hebei female population （belongs to Xiaoxing＇an Mountain） and Changbai Mountain female population was significantly different （P〈0.05 ）. Cluster analysis showed ： male R.dybowskii can be divided into three groups ： the first group included Quanyang, Tianbei, Chaoyang and Ddkouqin, the second group included Tieli and Anshan, the third group included Dongfanghong; and the female R. dybowskii can be divided into three groups ： the first group included Quanyang and Chaoyang, the second group included Tianbei and Dakouqin, the third group included Hebei. [Condusion] The paper deduced that the Sanjiang Plain was the geographical origin center ofR. dybowskii which radiated to Changbai Mountain and Xiaoxing＇an Mountain along the adverse current of Songhua River basin, therefore, the current distribution pattern of R. dybowskii was formed.

The runoff characteristics and harmonic analysis of the soil moisture dynamics in Robinia pseudoacacia stand

Robinia pseudoacacia stands act as a typical ecological protection forest in hilly semi-arid area of China. Two fields of surface runoff were separately set up in R. pseudoacacia stand and its clearcut area in the western Liaoning Province (1850-12225 E, 4024-4234 N) for measuring the characteristics of runoff and sediment as well as soil moisture dynamics. Contractive analysis of the two land types showed that there existed a significant difference in volumes of runoff and sediment between the sites of R. pseudoacacia stand and its clearcut area. The runoff volume and sediment volume in clearcut area were much bigger than those in R. pseudoacacia stand, with an increase amount of 40%-177% for runoff and 180%-400% for sediment. Hydrograph of surface runoff of typical rainfall showed that the peak value of runoff in R. pseudoacacia stand was decreased by 1.0-2.5?0-3m3s-1 compared with that in its clearcut area, and the occurring time of peak value of runoff in R. pseudoacacia stand was 10-20 min later than that in its clearcut area. Harmonic analysis of soil moisture dynamics indicated that the soil moisture in R. pseudoacacia stand was 2.3 % higher than that in clearcut area, and the soil moisture both in R. pseudoacacia stand and its clearcut area could be divided into dry season and humid season and varied periodically with annual rainfall precipitation. It was concluded that R. pseudoacacia stand plays a very important role in storing water, increasing soil moisture, and reducing surface runoff and soil erosion.

Circuit-Level Analysis on Opto-Electronic Characteristics of Ferroelectric Liquid Crystal

We propose an electronic model in Spice, instead of traditional mathematical analysis, for analyzing the performance of ferroelectric liquid crystal （FLC） under various working conditions. Using this equivalent circuit model,it is easy to simulate and analyze the behavior of an FLC layer in three different typical parameters,including temperature, input light wavelength, and the frequency of driving voltage. We conclude that the response velocity drops as the wavelength increases in the range of visible light, and for the parameter of temperature, the velocity reaches its lowest value when the temperature reaches a certain degree,meanwhile,the frequency of driving voltage exerts important effects on the response velocity only when the frequency is beyond a critical value. Excellent agreement is achieved between simulation and experimental results.

Analysis and verification of electrodynamic force,thermal stress and current sharing for CRAFT converter structure design

In the design realm of fusion power supplies,structural components play a pivotal role in ensuring the safety of fusion devices.To verify the reliability of the converter structure design at the Comprehensive Research Facility for Fusion Technology(CRAFT),meticulous analysis of the converter's dynamic impact is carefully performed based on the worst fault current(400k A),firstly.Subsequently,the thermal stress analysis based on the maximum allowable steadystate temperature is finished,and the equivalent thermal stress,thermal deformation,maximum shear stress of a single bridge arm and the whole converter are studied.Furthermore,a simple research method involving the current-sharing characteristics of a bridge arm with multithyristor parallel connection is proposed using a combination of Simplorer with Q3D in ANSYS.The results show that the current-sharing characteristics are excellent.Finally,the structural design has been meticulously tailored to meet the established requirements.