Spatiotemporal characteristics of summer hypoxia in Mirs Bay and adjacent coastal waters,South China

Mirs Bay is a semi-enclosed bay neighboring the Zhujiang(Pearl)River estuary,one of the largest estuarine systems in the world.The long-term historical observational data(1994-2017)of temperature,salinity,dissolved oxygen(DO),and biochemical parameters were used to examine the spatiotemporal distribution of hypoxia in Mirs Bay and adjacent coastal waters.Results show that bottom hypoxia varied seasonally and interannually.Hypoxia mainly occurred from June to September in Mirs Bay and the transition zone in the southern waters of Hong Kong,and the recorded hypoxia events have increased from 2007.The density difference between the bottom and surface layers was positively related to the bottom apparent oxygen utilization(AOU)(R=0.620,P<0.001)and negatively related to the bottom DO(R=0.616,P<0.001),indicating that water column stratification was an essential prerequisite for the formation of bottom hypoxia in summer.The bottom oxygen consumption and hypoxia had higher positive correlation with the seasonal thermocline(R=0.683,P<0.001)than the halocline(R=0.540,P<0.001),including in the area was affected by freshwater plume.The insignificant relationship between AOU and nutrients indicated that local eutrophication was not the only important factor in the formation of the hypoxic zone during summer.The decrease in phosphorous owing to the pollutant reduction policy and the increase in nitrate may have led to an increase in hypoxia events in the bay where waters therein are characterized by nitrogen-limitation.The increase in chemical oxygen demand in wastewater also promoted oxygen consumption.Compared to the adjacent coastal waters influenced by Zhujiang River plume water,the Mirs Bay experienced more hypoxia events.The high concentrations of ammonium and total Kjeldahl nitrogen in the sediment of Mirs Bay increased the oxygen depletion in the bottom water.The long residence time of the near-bottom water in Mirs Bay increased the risk of bottom hypoxia events,although the nutrient concentrations were lower than those in the transition zone.These factors lead to differences in hypoxia occurrence in Mirs Bay and adjacent coastal waters.

In-Orbit Calibration and Data Analysis of China＇s First Grazing Incidence Focusing X-Ray Pulsar Telescope

The grazing incidence focusing X-ray pulsar telescope(iFXPT), as the main payload of the X-ray Pulsar Navigation Test Satellite(XPNAV-1), will have great significance on China's space scientific exploration and X-ray pulsar navigation. With PSR B0531+21(Crab Pulsar) as the observation target, the pulsar profile has been recovered based on the data obtained by iFXPT, realizing the main objective of "observing" PSR B0531+21 for the first time in China. This payload mainly consists of the Wolter-I X-ray optics, silicon drift detector, magnetic deflector, electronics, high-energy particle shield and high-stability structures. Currently, the iFXPT, with its good in-orbit performance, has obtained a considerable observation data. The effective area, sensitivity and energy response have been calibrated both on ground and in-orbit, demonstrating a high degree of consistency. Meanwhile, the in-orbit observation data and information for pulsar navigation has also been analyzed simultaneously. As a result, the feasibility of the exploration scheme and the performance of the telescope have been fully validated.

Mathematical model of flow characteristic in multi-strand continuous casting tundishes

In this paper, the subject of mathematical model is a series of math expressions, which is used to calculate different regions＇ volume fraction and analyze flow characterization in multi-strand tundish. But research about mathematical model for multi-strand tundish is few, and so far, there has been no acknowledged math model for multi- strand tundish to describe its flow characteristic. If Sahai＇s model, which is originally proposed for the case of single-strand tundish （proposed in reference, and this model is widely used in the world）, is applied to describe flow feature in multi-strand tundish, the calculation results would be unreasonable. Based on the data of watermodel experiment results, the sum of each strand＇s dead region＇s volume fraction is bigger than 100%, and this obviously doesn＇T agree with reality; and the value of dead region＇s volume fraction is calculated to be minus according to mathematical simulation results data in another case. What＇s more, Sahai＇s model does not propose the standard of plotting the RTD-curve, and this makes scholars around the world can＇t achieve consensus of views about plotting RTD-curve. And the model doesn＇t consider the bypass flow and can＇t calculate its volume fraction, but bypass flow is critical to tundish metallurgy. And through Sahai＇s model, the calculation result of plug flow region＇s volume fraction is also not reasonable, because the model doesn＇t well describe the essence of plug flow. So these suggest that it is not reliable to apply Sahai＇s single-strand tundish model to multi-strand tundish case. Then a new model is attempted to propose in this paper for your discussion. In the new model, the standard of plotting RTD curve is definitely proposed, and relative calculation method is also proposed; and the feature of dead region is carefully studied and the model proposes a new method to calculate its volume fraction, and the calculation formula about its volume fraction can be adjustable according the actual demand; what＇s more, the new model considers the bypass flow and proposes a method to calculate its volume fraction for the first time, and then volume fraction of plug flow region, backmix flow region, dead region and bypass flow can be calculated and obtained at the same time; and this new model can better capture the deviation of reality flow pattern from ideal plug flow pattern, and reflects the feature of plug flow.

Stability and water control of nitrogen foam in bulk phase and porous media

Foam is widely used in the petroleum industry thanks to its unique properties and performance. Its application to water control in oil wells has received more and more attention. The stability of nitrogen foam was investigated in pressurized equipment and sand pack. The result indicated that with increasing pressure （0-2 MPa） the stability of foam in the pressurized equipment increased linearly. Increased nitrogen injection pressure caused better dispersion of nitrogen-foaming solution in porous media. The initial residual resistance factor to gas was an exponential function of injection pressure, but the residual resistance factor （to gas and liquid） decreased exponentially with time. The halflife of foam in porous media （expressed in residual resistance factor） was much longer than that in bulk phase （expressed in foam height）. Pore model analysis indicated that good dispersion in porous media and the presence of thick liquid film during dispersion were the main reasons for high stability. Field test indicated that effective residence of foam in the formation not only resulted in much better heat insulation, but also improved steam stimulation by enhancing steam heating.

Earthquake precursors detected by astronomical observations

It has been primarily confirmed that before the occurrence of a middle or major earthquake, anomalies in the residuals of universal time and latitude measurements obtained by astrometric observations may appear. We investigate the relation between the residual anomalies and the three key factors of an earthquake. To build a network of observational sites so as to obtain data of residuals of universal time and latitude from multi-instruments would be of certain significance for determining three key factors of an earthquake, especially for positioning epicenter. The data from multi-instruments would also be valuable for studies of the variation of the vertical. It is proposed to manufacture potable and high-accuracy astrometric instruments and to build observational network to obtain anomalies of universal time and latitude in the regions with high earthquake uprising possibilities.

Machine learning for nanohertz gravitational wave detection and parameter estimation with pulsar timing array

Studies have shown that the use of pulsar timing arrays(PTAs)is among the approaches with the highest potential to detect very low-frequency gravitational waves in the near future.Although the capture of gravitational waves(GWs)by PTAs has not been reported yet,many related theoretical studies and some meaningful detection limits have been reported.In this study,we focused on the nanohertz GWs from individual supermassive binary black holes.Given specific pulsars(PSR J1909-3744,PSR J1713+0747,PSR J0437-4715),the corresponding GW-induced timing residuals in PTAs with Gaussian white noise can be simulated.Further,we report the classification of the simulated PTA data and parameter estimation for potential GW sources using machine learning based on neural networks.As a classifier,the convolutional neural network shows high accuracy when the combined signal to noise ratio≥1.33 for our simulated data.Further,we applied a recurrent neural network to estimate the chirp mass(M)of the source and luminosity distance(Dp)of the pulsars and Bayesian neural networks(BNNs)to obtain the uncertainties of chirp mass estimation.Knowledge of the uncertainties is crucial to astrophysical observation.In our case,the mean relative error of chirp mass estimation is less than 13.6%.Although these results are achieved for simulated PTA data,we believe that they will be important for realizing intelligent processing in PTA data analysis.

CFD-based analysis of urban haze-fog dispersion—A preliminary study

This paper proposes a computational fluid dynamics(CFD)model,along with dimensionless quantitative assessment standard—air pollution residual time(APRT)for the evaluation of local haze-fog(HF)dispersion in a built environment.A low APRT value ensures good ventilation.A building group model that comprises high-rise business building,mid-rise office buildings,low-mid-rise residential buildings(at the center of the building group),a mid-rise recreational center,and a local road(open terrain),was scaled down(1:100)to simulate the HF dispersion process.The orientation of the building group was numerically modified to generate a wind incidence normal to the high-rise building,mid-rise buildings,recreational center,and road.The results showed that the orientation of the building group largely determines the APRT.The most favorable orientation can reduce APRT by more than 50%.Our results strongly suggested that in order to reduce the consequential negative effect of air pollution,future urban designs should undergo a comprehensive ventilation assessment to ensure a low APRT value.