In this study,a route for simultaneous mineralization of CO2 and production of titanium dioxide and ammonium alum,and microporous silicon dioxide from titanium-bearing blast furnace slag(TBBF slag)was proposed,which i...In this study,a route for simultaneous mineralization of CO2 and production of titanium dioxide and ammonium alum,and microporous silicon dioxide from titanium-bearing blast furnace slag(TBBF slag)was proposed,which is comprised of(NH4)2 S04 roasting,acid leaching,ammonium alum crystallization,silicic acid flocculation and Ti hydrolysis.The effects of relevant process parameters were systematically investigated.The re sults showed that under the optimal roasting and leaching conditions about 85%of titanium and 84.6%of aluminum could be extracted while only 30%of silicon entered the leachate.84%of Al^3+was crystallized from the leachate in the form of ammonium aluminum sulfate dodecahydrate with a purity up to 99.5 wt%.About 85%of the soluble silicic acid was flocculated with the aid of secondary alcohol polyoxyethylene ether 9(AEO-9)to yield a microporous SiO2 material(97.4 wt%)from the crystallized mother liquor.The Al-and Si-depleted solution was then hydrolyzed to generate a titanium dioxide(99.1 wt%)with uniform particle size distribution.It was figured out that approximately 146 kg TiO2 could be produced from 1000 kg of TBBF slag.Therefore,the improved process is a promising method for industrial application.展开更多
The sonocatalytic damage of bovine serum albumin （BSA） was studied in the presence of nanometer titanium dioxide （TiO2） powders by low frequency （80 kHz） ultrasound. The destruction of secondary structure and ch...The sonocatalytic damage of bovine serum albumin （BSA） was studied in the presence of nanometer titanium dioxide （TiO2） powders by low frequency （80 kHz） ultrasound. The destruction of secondary structure and change of α-helical structure of BSA were reflected by ultraviolet （UV） and circular dichroism （CD） spectroscopies.展开更多
A simple and effective method of removing polluted organics in water is reported here.Titanium dioxide is a catalyst in photo-oxidation of monocrotophos.The mechanism of photocatalytic oxidation and the kinetics of th...A simple and effective method of removing polluted organics in water is reported here.Titanium dioxide is a catalyst in photo-oxidation of monocrotophos.The mechanism of photocatalytic oxidation and the kinetics of the reaction were studied. This same principle also leads to the construction of instrument of PTR-FIA analysis for monitoring organic phosphorus and phosphate in water.展开更多
Titanium is a very important element for several industrial applications, being one of the ninth most abundant elements in the Earth’s crust (0.63% wt). In this work it will discuss the different mining and industria...Titanium is a very important element for several industrial applications, being one of the ninth most abundant elements in the Earth’s crust (0.63% wt). In this work it will discuss the different mining and industrial activities involved in the production of titanium dioxide. The first step analyzed will treat about the beneficiation mining process of titanium mineral, and secondly, it will discuss the two main processes of the TiO2 manufacturing (sulphate and chloride routes). In addition, we will show different uses of the titanium dioxide pigment as filler in paper, plastics and rubber industries and as flux in glass manufacture, etc. Finally, we will show that the old wastes are currently called co-products since they were valorized, being commercialized by the Spanish industry of TiO2 production in different fields such as agriculture, civil engineering, or cement manufacturing.展开更多
In this work we have developed an analytical method to measure potential titanium debris released from TiO2 nanotube layers devices immersed in biological fluids. This quantitative study is highly required to ensure b...In this work we have developed an analytical method to measure potential titanium debris released from TiO2 nanotube layers devices immersed in biological fluids. This quantitative study is highly required to ensure both the security and non toxicity of the nanostructured surfaces used as future implantable medical devices in the living. A one-pot synthesis process is developed to produce high quality standard solutions of titanium dioxide nanoparticles in aqueous medium. The elaborated dispersion is then used to fabricate standard solutions in both aqueous and human blood plasma media. The synthesized nanoparticles dispersion was characterized by granulometry. The nanoparticles structure and morphology were then observed using Transmission Electron Microscopy (TEM). Thermogravimetric Analysis (TGA) was used to evaluate the concentration of TiO2 in the suspension. A quantitative routine by the use of Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) is developed. The quantification threshold of titanium species is found to be in the 30 - 40 ppb range. None interference is detected between the particles and the human blood plasma. Using the established quantitative routine, the titanium species release from titania nanotube layers in human blood plasma is evaluated.展开更多
The Dye Sensitized Solar Cell (DSSC) plays an important role because of low material cost, ease of production and high conversion efficiency as compared to other thin-film solar cell technologies. The main objective i...The Dye Sensitized Solar Cell (DSSC) plays an important role because of low material cost, ease of production and high conversion efficiency as compared to other thin-film solar cell technologies. The main objective is to create and find the best configuration of the solar cell based on materials that are inexpensive and highly efficient in solar energy conversion and subsequently test the efficiency of dye sensitized titanium dioxide solar cell. We begin the process with two glass plates coated with Fluorine tin oxide (FTO). Titanium dioxide is applied to the conductive side of one plate and the other plate is coated with graphite. A dye is adsorbed on to the TiO2 layer and then the plates are sandwiched together. A drop of iodide electrolyte is then added between the plates. The tests carried out indoors under a lamp emitting all wavelengths in the visible spectrum were not found to provide consistent data due to substantial heating of the cell. The outdoor tests carried out in natural sunlight exhibited steady voltage at much higher level. Future research will involve the incorporation of quantum dots instead of the organic dye as a sensitizer. Quantum dots have the advantages of providing tunable band gaps and the ability to absorb specific wavelength.展开更多
Extensive work on a Cu-modified TiO_(2) photocatalyst for CO_(2) reduction under visible light irradiation was conducted. The structure of the copper cocatalyst was established using UV-vis diff use refl ectance spect...Extensive work on a Cu-modified TiO_(2) photocatalyst for CO_(2) reduction under visible light irradiation was conducted. The structure of the copper cocatalyst was established using UV-vis diff use refl ectance spectroscopy, high-resolution transmis- sion electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy. It was found that copper exists in different states (Cu 0 , Cu^(+) , and Cu^(2+) ), the content of which depends on the TiO_(2) calcination temperature and copper loading. The optimum composition of the cocatalyst has a photocatalyst based on TiO_(2) calcined at 700℃ and modified with 5 wt% copper, the activity of which is 22 μmol/(h·g cat ) (409 nm). Analysis of the photocatalysts after the photocatalytic reaction disclosed that the copper metal on the surface of the calcined TiO_(2) was gradually converted into Cu_(2) O during the photocatalytic reaction. Meanwhile, the metallic copper on the surface of the noncalcined TiO_(2) did not undergo any trans- formation during the reaction.展开更多
Hydrogen(H2)production from photocatalytic reforming of cellulose is a promising way for sustainable H2 to be generated.Herein,we report a systematic study of the photocatalytic reforming of cellulose over Pt/m-TiO2(i...Hydrogen(H2)production from photocatalytic reforming of cellulose is a promising way for sustainable H2 to be generated.Herein,we report a systematic study of the photocatalytic reforming of cellulose over Pt/m-TiO2(i.e.mixed TiO2,80%of anatase and 20%of rutile)catalysts in water.The optimum operation condition was established by studying the effect of Pt loading,catalyst concentration,cellulose concentration and reaction temperature on the gas production rate of H2(r(H2))and CO2(r(CO2)),suggesting an optimum operation condition at 40°C with 1.0 g·L^-1of cellulose and 0.75 g·L^-1of 0.16-Pt/m-TiO2 catalyst(with 0.16 wt%Pt loadting)to achieve a relatively sound photocatalytic performance with rH2=9.95μmol·h^-1.It is also shown that although the photoreforming of cellulose was operated at a relatively mild condition(i.e.with an UV-A lamp irradiation at40°C in the aqueous system),a low loading of Pt at^0.16 wt%on m-TiO2 could promote the H2 production effectively.Additionally,by comparing the reaction order expressed from both r(H2)(a1)and r(CO2)(a2)with respect to cellulose and water,the possible mechanism of H2 production was proposed.展开更多
Corrosion protection has become an important issue as the amount of infrastructure construction in marine environment increased.Photocathodic protection is a promising method to reduce the corrosion of metals,and tita...Corrosion protection has become an important issue as the amount of infrastructure construction in marine environment increased.Photocathodic protection is a promising method to reduce the corrosion of metals,and titanium dioxide(TiO2) is the most widely used photoanode.This review summarizes the progress in TiO2 photo gene rated protection in recent years.Different types of semiconductors,including sulfides,metals,metal oxide s,polymers,and other materials,are used to design and modify TiO2.The strategy to dramatically improve the efficiency of photoactivity is proposed,and the mechanism is investigated in detail.Characterization methods are also introduced,including morphology testing,light absorption,photoelectrochemistry,and protected metal observation.This review aims to provide a comprehensive overview of Ti02 development and guide photocathodic protection.展开更多
The blast furnace slag bearing Ti02 in Panzhihua, China, is an important resource to be utilized. In the present paper, the effects of the ratio of slag to H2S04, the reaction temperature, the particle size of the sla...The blast furnace slag bearing Ti02 in Panzhihua, China, is an important resource to be utilized. In the present paper, the effects of the ratio of slag to H2S04, the reaction temperature, the particle size of the slag, and the concentration of H2S04 on the reaction rate and the acidolysis ratio of Ti were studied. The results indicated that the maximum acidolysis ratio reached 98%, which can serve as an experimental basis for the production of titania from the slag.展开更多
The electrochemical reduction of solid TiO2 directly to solid metal is a promising alternative to the current Kroll process. The present work is aimed at studying the effect of electrolysis voltage on the rate of elec...The electrochemical reduction of solid TiO2 directly to solid metal is a promising alternative to the current Kroll process. The present work is aimed at studying the effect of electrolysis voltage on the rate of electrochemical reduction. The products of electrochemical reduction of TiO2 and Ti2O were examined using the scanning electron microscopy （SEM） and X-ray diffraction （XRD） techniques. The results show that Ti2O was reduced to low valent titanium oxide at 1.5 -1.7 V, which was the result of ionization of oxygen. TiO2 and Ti20 were reduced to titanium metal at 2.1-3.1 V, which was the co-action of ionization of oxygen and calciothermic reduction. The oxygen content decreased rapidly with voltage increasing from 2.1 to 2.6 V, while it changed little from 2.6 to 3.1 V. The optimized cell voltage was 2.6-3.1 V.展开更多
Anatase TiO2 nanosheets（-ns-） with dominant exposed {001} facets were used as support to load copper,and the synthesized Cu/TiO2-ns catalysts were evaluated for CO2 hydrogenation to methanol. Under the reaction cond...Anatase TiO2 nanosheets（-ns-） with dominant exposed {001} facets were used as support to load copper,and the synthesized Cu/TiO2-ns catalysts were evaluated for CO2 hydrogenation to methanol. Under the reaction conditions, P = 3.0 MPa, T = 260 ℃, V（N2）：V（H2）：V（CO2） = 8：69：23 and gas hourly space velocity（GHSV） = 3600 mL g-1h-1, the methanol yield reached an appealing high value, 5.6%. Copper-loading amount, calcination temperature and reduction atmosphere have been investigated in this work, which significantly influence the particle sizes of copper and/or the defect concentration in TiO2, then leading to different catalytic performance. Characterizations of XRD, EPR, CO2-TPD and FTIR demonstrate that higher specific surface area of Cu is good for the hydrogenation of CO2 and adequate amount of Ti3＋ plays important roles in CO2 activation. Both of them facilitate high turnover frequency（TOF） of methanol formation.展开更多
基金financial support of the National Key Projects for Fundamental Research and Development of China(2016YFB0600904)Sichuan University Postdoctoral Research and Development Fund(2017SCU12017)+1 种基金Project of State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization(18H0083)Sichuan Science and Technology Department Project(2019YJ0111)。
文摘In this study,a route for simultaneous mineralization of CO2 and production of titanium dioxide and ammonium alum,and microporous silicon dioxide from titanium-bearing blast furnace slag(TBBF slag)was proposed,which is comprised of(NH4)2 S04 roasting,acid leaching,ammonium alum crystallization,silicic acid flocculation and Ti hydrolysis.The effects of relevant process parameters were systematically investigated.The re sults showed that under the optimal roasting and leaching conditions about 85%of titanium and 84.6%of aluminum could be extracted while only 30%of silicon entered the leachate.84%of Al^3+was crystallized from the leachate in the form of ammonium aluminum sulfate dodecahydrate with a purity up to 99.5 wt%.About 85%of the soluble silicic acid was flocculated with the aid of secondary alcohol polyoxyethylene ether 9(AEO-9)to yield a microporous SiO2 material(97.4 wt%)from the crystallized mother liquor.The Al-and Si-depleted solution was then hydrolyzed to generate a titanium dioxide(99.1 wt%)with uniform particle size distribution.It was figured out that approximately 146 kg TiO2 could be produced from 1000 kg of TBBF slag.Therefore,the improved process is a promising method for industrial application.
基金We greatly acknowledge the National Natural Science Foundation of China for financial support.
文摘The sonocatalytic damage of bovine serum albumin （BSA） was studied in the presence of nanometer titanium dioxide （TiO2） powders by low frequency （80 kHz） ultrasound. The destruction of secondary structure and change of α-helical structure of BSA were reflected by ultraviolet （UV） and circular dichroism （CD） spectroscopies.
文摘A simple and effective method of removing polluted organics in water is reported here.Titanium dioxide is a catalyst in photo-oxidation of monocrotophos.The mechanism of photocatalytic oxidation and the kinetics of the reaction were studied. This same principle also leads to the construction of instrument of PTR-FIA analysis for monitoring organic phosphorus and phosphate in water.
基金This research has been partially supported by the Government of Andalusia’s project“Characterization and modelling of the phosphogypsum stacks from Huelva for their environmental management and control”(Ref.:RNM-6300) by National Institution of Higher Education,Science,Technology and Innovation of the Republic of Ecuador-(SENESCYT for its acronym in Spanish)+2 种基金The authors would like to acknowledge the financial support received from the company Tioxide-Huelva by the research projects“Valorization of red gypsum from the industrial production of titanium dioxide”(PROFIT,CIT-310200-2007-47)“Applications of red gypsum and Tionite waste in commercial applications”The authors also thank to the technical staff for the advisory provided in the explanation of the results.
文摘Titanium is a very important element for several industrial applications, being one of the ninth most abundant elements in the Earth’s crust (0.63% wt). In this work it will discuss the different mining and industrial activities involved in the production of titanium dioxide. The first step analyzed will treat about the beneficiation mining process of titanium mineral, and secondly, it will discuss the two main processes of the TiO2 manufacturing (sulphate and chloride routes). In addition, we will show different uses of the titanium dioxide pigment as filler in paper, plastics and rubber industries and as flux in glass manufacture, etc. Finally, we will show that the old wastes are currently called co-products since they were valorized, being commercialized by the Spanish industry of TiO2 production in different fields such as agriculture, civil engineering, or cement manufacturing.
文摘In this work we have developed an analytical method to measure potential titanium debris released from TiO2 nanotube layers devices immersed in biological fluids. This quantitative study is highly required to ensure both the security and non toxicity of the nanostructured surfaces used as future implantable medical devices in the living. A one-pot synthesis process is developed to produce high quality standard solutions of titanium dioxide nanoparticles in aqueous medium. The elaborated dispersion is then used to fabricate standard solutions in both aqueous and human blood plasma media. The synthesized nanoparticles dispersion was characterized by granulometry. The nanoparticles structure and morphology were then observed using Transmission Electron Microscopy (TEM). Thermogravimetric Analysis (TGA) was used to evaluate the concentration of TiO2 in the suspension. A quantitative routine by the use of Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) is developed. The quantification threshold of titanium species is found to be in the 30 - 40 ppb range. None interference is detected between the particles and the human blood plasma. Using the established quantitative routine, the titanium species release from titania nanotube layers in human blood plasma is evaluated.
文摘The Dye Sensitized Solar Cell (DSSC) plays an important role because of low material cost, ease of production and high conversion efficiency as compared to other thin-film solar cell technologies. The main objective is to create and find the best configuration of the solar cell based on materials that are inexpensive and highly efficient in solar energy conversion and subsequently test the efficiency of dye sensitized titanium dioxide solar cell. We begin the process with two glass plates coated with Fluorine tin oxide (FTO). Titanium dioxide is applied to the conductive side of one plate and the other plate is coated with graphite. A dye is adsorbed on to the TiO2 layer and then the plates are sandwiched together. A drop of iodide electrolyte is then added between the plates. The tests carried out indoors under a lamp emitting all wavelengths in the visible spectrum were not found to provide consistent data due to substantial heating of the cell. The outdoor tests carried out in natural sunlight exhibited steady voltage at much higher level. Future research will involve the incorporation of quantum dots instead of the organic dye as a sensitizer. Quantum dots have the advantages of providing tunable band gaps and the ability to absorb specific wavelength.
基金supported by Russian Science Foundation (No.#21-73-10235)
文摘Extensive work on a Cu-modified TiO_(2) photocatalyst for CO_(2) reduction under visible light irradiation was conducted. The structure of the copper cocatalyst was established using UV-vis diff use refl ectance spectroscopy, high-resolution transmis- sion electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy. It was found that copper exists in different states (Cu 0 , Cu^(+) , and Cu^(2+) ), the content of which depends on the TiO_(2) calcination temperature and copper loading. The optimum composition of the cocatalyst has a photocatalyst based on TiO_(2) calcined at 700℃ and modified with 5 wt% copper, the activity of which is 22 μmol/(h·g cat ) (409 nm). Analysis of the photocatalysts after the photocatalytic reaction disclosed that the copper metal on the surface of the calcined TiO_(2) was gradually converted into Cu_(2) O during the photocatalytic reaction. Meanwhile, the metallic copper on the surface of the noncalcined TiO_(2) did not undergo any trans- formation during the reaction.
基金the China Scholarship Council(CSC,file no.201706950035)University of Manchester joint studentship for supporting her PhD researchthe CSC for her academic visiting fellowship at The University of Manchester(file no.201708440477)the Foundation of Department of Education of Guangdong Province(No.2017KZDXM085,2018KZDXM070)。
文摘Hydrogen(H2)production from photocatalytic reforming of cellulose is a promising way for sustainable H2 to be generated.Herein,we report a systematic study of the photocatalytic reforming of cellulose over Pt/m-TiO2(i.e.mixed TiO2,80%of anatase and 20%of rutile)catalysts in water.The optimum operation condition was established by studying the effect of Pt loading,catalyst concentration,cellulose concentration and reaction temperature on the gas production rate of H2(r(H2))and CO2(r(CO2)),suggesting an optimum operation condition at 40°C with 1.0 g·L^-1of cellulose and 0.75 g·L^-1of 0.16-Pt/m-TiO2 catalyst(with 0.16 wt%Pt loadting)to achieve a relatively sound photocatalytic performance with rH2=9.95μmol·h^-1.It is also shown that although the photoreforming of cellulose was operated at a relatively mild condition(i.e.with an UV-A lamp irradiation at40°C in the aqueous system),a low loading of Pt at^0.16 wt%on m-TiO2 could promote the H2 production effectively.Additionally,by comparing the reaction order expressed from both r(H2)(a1)and r(CO2)(a2)with respect to cellulose and water,the possible mechanism of H2 production was proposed.
基金the CAS Strategic Priority Project(No.XDA13040404)the National Natural Science Foundation of China for Exploring Key Scientific Instrument(No.41827805)the Shandong Key Laboratory of Corrosion Science。
文摘Corrosion protection has become an important issue as the amount of infrastructure construction in marine environment increased.Photocathodic protection is a promising method to reduce the corrosion of metals,and titanium dioxide(TiO2) is the most widely used photoanode.This review summarizes the progress in TiO2 photo gene rated protection in recent years.Different types of semiconductors,including sulfides,metals,metal oxide s,polymers,and other materials,are used to design and modify TiO2.The strategy to dramatically improve the efficiency of photoactivity is proposed,and the mechanism is investigated in detail.Characterization methods are also introduced,including morphology testing,light absorption,photoelectrochemistry,and protected metal observation.This review aims to provide a comprehensive overview of Ti02 development and guide photocathodic protection.
文摘The blast furnace slag bearing Ti02 in Panzhihua, China, is an important resource to be utilized. In the present paper, the effects of the ratio of slag to H2S04, the reaction temperature, the particle size of the slag, and the concentration of H2S04 on the reaction rate and the acidolysis ratio of Ti were studied. The results indicated that the maximum acidolysis ratio reached 98%, which can serve as an experimental basis for the production of titania from the slag.
基金the Postdoctoral Science Foundation of China (No. 20060400409).
文摘The electrochemical reduction of solid TiO2 directly to solid metal is a promising alternative to the current Kroll process. The present work is aimed at studying the effect of electrolysis voltage on the rate of electrochemical reduction. The products of electrochemical reduction of TiO2 and Ti2O were examined using the scanning electron microscopy （SEM） and X-ray diffraction （XRD） techniques. The results show that Ti2O was reduced to low valent titanium oxide at 1.5 -1.7 V, which was the result of ionization of oxygen. TiO2 and Ti20 were reduced to titanium metal at 2.1-3.1 V, which was the co-action of ionization of oxygen and calciothermic reduction. The oxygen content decreased rapidly with voltage increasing from 2.1 to 2.6 V, while it changed little from 2.6 to 3.1 V. The optimized cell voltage was 2.6-3.1 V.
基金financially supported by the National Natural Science Foundation of China (no. 91645119, 21207039, B5151050)the Fundamental Research Funds for the Central Universities (No.2017ZD076)+2 种基金Guangzhou science and technology plan (201607010095)the Natural Science Foundation of Guangdong Province, China (Grant no. S2011010000737)State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, P.R. China (No. 201602)
文摘Anatase TiO2 nanosheets（-ns-） with dominant exposed {001} facets were used as support to load copper,and the synthesized Cu/TiO2-ns catalysts were evaluated for CO2 hydrogenation to methanol. Under the reaction conditions, P = 3.0 MPa, T = 260 ℃, V（N2）：V（H2）：V（CO2） = 8：69：23 and gas hourly space velocity（GHSV） = 3600 mL g-1h-1, the methanol yield reached an appealing high value, 5.6%. Copper-loading amount, calcination temperature and reduction atmosphere have been investigated in this work, which significantly influence the particle sizes of copper and/or the defect concentration in TiO2, then leading to different catalytic performance. Characterizations of XRD, EPR, CO2-TPD and FTIR demonstrate that higher specific surface area of Cu is good for the hydrogenation of CO2 and adequate amount of Ti3＋ plays important roles in CO2 activation. Both of them facilitate high turnover frequency（TOF） of methanol formation.
