Nanostructured zinc-copper mixed ferrite was synthesized using sol-gel method. Different compositions of ferrite, Zn_((1-x))Cu_xFe_2O_4(x=0.0, 0.25, 0.50, 0.75), characterized by XRD, reveal single phase inverse spine...Nanostructured zinc-copper mixed ferrite was synthesized using sol-gel method. Different compositions of ferrite, Zn_((1-x))Cu_xFe_2O_4(x=0.0, 0.25, 0.50, 0.75), characterized by XRD, reveal single phase inverse spinel in all the samples. With increasing copper content, the crystallite size increases. The surface morphology of all the samples, studied by SEM, shows porous structure of particles. The prepared samples were also analyzed by FT-IR and TEM. Catalytic activity of the samples was studied on lanthanum oxalate decomposition by thermogravimety.The rate constant k has the highest value with x=0.75 and 5%(mole fraction) of the catalyst and is attributed to high copper content, the mixed sites Cu^(2+)-Fe^+ and/or Cu^+-Fe^(2+) ion pairs besides the one component sites Cu^(2+)-Cu^+, Fe^(3+)-Fe^(2+), as a result of mutual charge interaction. In other words, the increasing activity of mixed oxides is attributed to increase in the content of active sites via creation of new ion pairs. With increasing Zn content, particle size increases. Variation of catalytic activity of ferrite powders is due to the changes of the valence state of catalytically active components of the ferrites, which oxidizes the carbon monoxide released from lanthanum oxalate.展开更多
Nanocrystalline nickel ferrites with substitution of Fe3+ by rare-earth La3+, according to the formula NiLaxFe2-xO4 (with x=0, 0.05, 0.1 and 0.15), were prepared by polyacrylamide gel method. Influences of the amount ...Nanocrystalline nickel ferrites with substitution of Fe3+ by rare-earth La3+, according to the formula NiLaxFe2-xO4 (with x=0, 0.05, 0.1 and 0.15), were prepared by polyacrylamide gel method. Influences of the amount of La3+ substitution on the structure and electromagnetic properties of NiLaxFe2-xO4 compounds were systematically investigated by DSC-TG, XRD, TEM and wave-guide method. XRD results indicated that the pure spinel-type crystal structure of the NiLaxFe2-xO4 (x=0 and 0.05) was obtained at 500 ℃. TEM results showed that the average particle sizes of NiFe2O4 and NiLa0.1Fe1.9O4 particles were about 10 and 15 nm, respectively. The complex permittivity and complex permeability was measured in the frequency range of 8.2～12.4 GHz. The results revealed that the nanocrystalline NiLaxFe2-xO4 had both dielectric loss and magnetic loss in the frequency range of 8.2～12.4 GHz. The tgδε and tgδm of NiLaxFe2-xO4 (with x=0 and 0.05) decreased with the increase of La3+ ions content, and some strong resonance peaks of the tgδε and tgδm of NiLaxFe2-xO4 (with x=0.1 and 0.15) appeared because of the secondary phases (LaFeO3) and more lattice defects.展开更多
A series of perovskite type oxides with formula La1-xHoxFeO3, with Ho substitute for La, where (x = 0.1, 0.2, 0.3 and 0.4). The samples have been prepared by the standard ceramic technique, sintered at 1200˚C...A series of perovskite type oxides with formula La1-xHoxFeO3, with Ho substitute for La, where (x = 0.1, 0.2, 0.3 and 0.4). The samples have been prepared by the standard ceramic technique, sintered at 1200˚C for nine hours. Their crystalline structure was investigated using X-ray diffraction and IR spectroscopy. The X-ray diffraction analysis illustrates that the system La1-xHoxFeO3 has a perovskite orthorhombic phase. IR absorption spectra of La1-xHoxFeO3 showed two main characteristic absorption bands in the far infrared region. These bands are assigned to oxygen octahedral bending vibration and oxygen tetrahedron stretching vibration. It was found that the DC electrical conductivity increases linearly with temperature ensuring the semiconducting nature of the samples. The dielectric properties, Electron Spin Resonance (ESR) spectra, and thermal properties have been studied, to go through the material and explore its ability to be used for many industrial applications.展开更多
A kind of La doped ferrite was prepared with marine manganese nodules derived from East Pacific sea-bottom as raw material, NaOH as fluxing reagent, La(NO3)3 as doping agent, by calcination at 1000 ℃ for 5 h. XRD ana...A kind of La doped ferrite was prepared with marine manganese nodules derived from East Pacific sea-bottom as raw material, NaOH as fluxing reagent, La(NO3)3 as doping agent, by calcination at 1000 ℃ for 5 h. XRD analysis showed that the ferrite products were of a spinel structure, and that its molecular formula could be expressed as MnFe2-xRxO4. SEM images proved that these ferrites showed octahedral and cubic aspects. It was found that there is some relationship between the La doping amount and the magnetic property of the ferrite. When the La doping amount was 0.03, the susceptibility of the ferrite was maximal. The as-prepared La doped ferrite is a kind of soft magnetic material that is easy to be magnetized with rather weak coercive force.展开更多
Stro ntium-doped lanthanum ferrite(LSF)is a potential ceramic cathode for direct CO_(2) electrolysis in solid oxide electrolysis cells(SOECs),but its application is limited by insufficient catalytic activity and stabi...Stro ntium-doped lanthanum ferrite(LSF)is a potential ceramic cathode for direct CO_(2) electrolysis in solid oxide electrolysis cells(SOECs),but its application is limited by insufficient catalytic activity and stability in CO_(2)-containing atmospheres.Herein,a novel strategy is proposed to enhance the electrolytic performance as well as chemical stability,achieved by doping F into the O-site of the perovskite LSF.Doping F does not change the phase structure but reduces the cell volume and improves the chemical stability in a CO_(2)-rich atmosphere.Importantly,F doping favors oxygen vacancy formation,increases oxygen vacancy concentration,and enhances the CO_(2) adsorption capability.Meanwhile,doping with F greatly improves the kinetics of the CO_(2) reduction reaction.For example,kchem increases by 78%from3.49×10^(-4) cm s^(-1) to 6.24×10^(-4) cm s^(-1),and Dchem doubles from 4.68×10^(-5) cm^(2) s^(-1) to 9.45×10^(-5)cm^(2) s^(-1).Consequently,doping F significantly increases the electrochemical performance,such as reducing R_(p) by 52.2%from 0.226Ωcm^(2) to 0.108Ωcm^(2) at 800℃.As a result,the single cell with the Fcontaining cathode exhibits an extremely high current density of 2.58 A cm^(-2) at 800℃and 1.5 V,as well as excellent durability over 200 h for direct CO_(2) electrolysis in SOECs.展开更多
Solid oxide fuel cells （SOFCs） offer high energy conversion, low noise, low pollutant emission, and low processing cost. Despite many advantages, SOFCs face a major challenge in competing with other types of fuel ce...Solid oxide fuel cells （SOFCs） offer high energy conversion, low noise, low pollutant emission, and low processing cost. Despite many advantages, SOFCs face a major challenge in competing with other types of fuel cells because of their high operating temperature. The necessity to reduce the operational temperature of SOFCs has led to the development of research into the materials and fabrication technology of fuel cells. The use of composite cathodes significantly reduces the cathode polarization resistance and expands the triple phase boundary area available for oxygen reduction. Powder preparation and composite cathode fabrication also affect the overall performance of composite cathodes and fuel cells. Among many types of cathode materials, lanthanum-based materials such as lanthanum strontium cobalt ferrite （Lal_xSrxCOl_yFey03_~） have recently been discovered to offer great compatibility with ceria-based electrolytes in performing as composite cathode materials for intermediate- to low-temperature SOFCs （IT-LTSOFCs）. This paper reviews various ceria-based composite cathodes for IT-LTSOFCs and focuses on the aspects of progress and challenges in materials technology.展开更多
文摘Nanostructured zinc-copper mixed ferrite was synthesized using sol-gel method. Different compositions of ferrite, Zn_((1-x))Cu_xFe_2O_4(x=0.0, 0.25, 0.50, 0.75), characterized by XRD, reveal single phase inverse spinel in all the samples. With increasing copper content, the crystallite size increases. The surface morphology of all the samples, studied by SEM, shows porous structure of particles. The prepared samples were also analyzed by FT-IR and TEM. Catalytic activity of the samples was studied on lanthanum oxalate decomposition by thermogravimety.The rate constant k has the highest value with x=0.75 and 5%(mole fraction) of the catalyst and is attributed to high copper content, the mixed sites Cu^(2+)-Fe^+ and/or Cu^+-Fe^(2+) ion pairs besides the one component sites Cu^(2+)-Cu^+, Fe^(3+)-Fe^(2+), as a result of mutual charge interaction. In other words, the increasing activity of mixed oxides is attributed to increase in the content of active sites via creation of new ion pairs. With increasing Zn content, particle size increases. Variation of catalytic activity of ferrite powders is due to the changes of the valence state of catalytically active components of the ferrites, which oxidizes the carbon monoxide released from lanthanum oxalate.
基金General Armament Department of the Chinese People's Liberation Army (42001080204)the Natural Science Foundation of Liaoning ,China (2040189)
文摘Nanocrystalline nickel ferrites with substitution of Fe3+ by rare-earth La3+, according to the formula NiLaxFe2-xO4 (with x=0, 0.05, 0.1 and 0.15), were prepared by polyacrylamide gel method. Influences of the amount of La3+ substitution on the structure and electromagnetic properties of NiLaxFe2-xO4 compounds were systematically investigated by DSC-TG, XRD, TEM and wave-guide method. XRD results indicated that the pure spinel-type crystal structure of the NiLaxFe2-xO4 (x=0 and 0.05) was obtained at 500 ℃. TEM results showed that the average particle sizes of NiFe2O4 and NiLa0.1Fe1.9O4 particles were about 10 and 15 nm, respectively. The complex permittivity and complex permeability was measured in the frequency range of 8.2～12.4 GHz. The results revealed that the nanocrystalline NiLaxFe2-xO4 had both dielectric loss and magnetic loss in the frequency range of 8.2～12.4 GHz. The tgδε and tgδm of NiLaxFe2-xO4 (with x=0 and 0.05) decreased with the increase of La3+ ions content, and some strong resonance peaks of the tgδε and tgδm of NiLaxFe2-xO4 (with x=0.1 and 0.15) appeared because of the secondary phases (LaFeO3) and more lattice defects.
文摘A series of perovskite type oxides with formula La1-xHoxFeO3, with Ho substitute for La, where (x = 0.1, 0.2, 0.3 and 0.4). The samples have been prepared by the standard ceramic technique, sintered at 1200˚C for nine hours. Their crystalline structure was investigated using X-ray diffraction and IR spectroscopy. The X-ray diffraction analysis illustrates that the system La1-xHoxFeO3 has a perovskite orthorhombic phase. IR absorption spectra of La1-xHoxFeO3 showed two main characteristic absorption bands in the far infrared region. These bands are assigned to oxygen octahedral bending vibration and oxygen tetrahedron stretching vibration. It was found that the DC electrical conductivity increases linearly with temperature ensuring the semiconducting nature of the samples. The dielectric properties, Electron Spin Resonance (ESR) spectra, and thermal properties have been studied, to go through the material and explore its ability to be used for many industrial applications.
基金the National Natural Science Foundation of China (NSFC 40637037)
文摘A kind of La doped ferrite was prepared with marine manganese nodules derived from East Pacific sea-bottom as raw material, NaOH as fluxing reagent, La(NO3)3 as doping agent, by calcination at 1000 ℃ for 5 h. XRD analysis showed that the ferrite products were of a spinel structure, and that its molecular formula could be expressed as MnFe2-xRxO4. SEM images proved that these ferrites showed octahedral and cubic aspects. It was found that there is some relationship between the La doping amount and the magnetic property of the ferrite. When the La doping amount was 0.03, the susceptibility of the ferrite was maximal. The as-prepared La doped ferrite is a kind of soft magnetic material that is easy to be magnetized with rather weak coercive force.
基金supported by the National Key R&D Program of China(2021YFB4001401)the National Natural Science Foundation of China(51972298)。
文摘Stro ntium-doped lanthanum ferrite(LSF)is a potential ceramic cathode for direct CO_(2) electrolysis in solid oxide electrolysis cells(SOECs),but its application is limited by insufficient catalytic activity and stability in CO_(2)-containing atmospheres.Herein,a novel strategy is proposed to enhance the electrolytic performance as well as chemical stability,achieved by doping F into the O-site of the perovskite LSF.Doping F does not change the phase structure but reduces the cell volume and improves the chemical stability in a CO_(2)-rich atmosphere.Importantly,F doping favors oxygen vacancy formation,increases oxygen vacancy concentration,and enhances the CO_(2) adsorption capability.Meanwhile,doping with F greatly improves the kinetics of the CO_(2) reduction reaction.For example,kchem increases by 78%from3.49×10^(-4) cm s^(-1) to 6.24×10^(-4) cm s^(-1),and Dchem doubles from 4.68×10^(-5) cm^(2) s^(-1) to 9.45×10^(-5)cm^(2) s^(-1).Consequently,doping F significantly increases the electrochemical performance,such as reducing R_(p) by 52.2%from 0.226Ωcm^(2) to 0.108Ωcm^(2) at 800℃.As a result,the single cell with the Fcontaining cathode exhibits an extremely high current density of 2.58 A cm^(-2) at 800℃and 1.5 V,as well as excellent durability over 200 h for direct CO_(2) electrolysis in SOECs.
基金Project supported by the Universiti Kebangsaan Malaysia (No. UKM-RF-07-FRGS0260-2010)the Malaysia Government for Research Sponsorship (No. OUP-2012-075)
文摘Solid oxide fuel cells （SOFCs） offer high energy conversion, low noise, low pollutant emission, and low processing cost. Despite many advantages, SOFCs face a major challenge in competing with other types of fuel cells because of their high operating temperature. The necessity to reduce the operational temperature of SOFCs has led to the development of research into the materials and fabrication technology of fuel cells. The use of composite cathodes significantly reduces the cathode polarization resistance and expands the triple phase boundary area available for oxygen reduction. Powder preparation and composite cathode fabrication also affect the overall performance of composite cathodes and fuel cells. Among many types of cathode materials, lanthanum-based materials such as lanthanum strontium cobalt ferrite （Lal_xSrxCOl_yFey03_~） have recently been discovered to offer great compatibility with ceria-based electrolytes in performing as composite cathode materials for intermediate- to low-temperature SOFCs （IT-LTSOFCs）. This paper reviews various ceria-based composite cathodes for IT-LTSOFCs and focuses on the aspects of progress and challenges in materials technology.
