期刊文献+
共找到126篇文章
< 1 2 7 >
每页显示 20 50 100
A conformal titanyl phosphate amorphous overlayer for enhancing photoelectrochemical hydrogen peroxide production
1
作者 Jaekyum Kim Young Eun Kim +8 位作者 Minyeong Je Won Tae Hong Chang-Lyoul Lee Tae-Hoon Kim Sung Min Cho Chang Hyuck Choi Heechae Choi Woo-Seok Choe Jung Kyu Kim 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2023年第11期399-408,I0009,共11页
Photoelectrochemical(PEC)H_(2)O_(2)production through water oxidation reaction(WOR)is a promising strategy,however,designing highly efficient and selective photoanode materials remains challenging due to competitive r... Photoelectrochemical(PEC)H_(2)O_(2)production through water oxidation reaction(WOR)is a promising strategy,however,designing highly efficient and selective photoanode materials remains challenging due to competitive reaction pathways.Here,for highly enhanced PEC H_(2)O_(2)production,we present a conformal amorphous titanyl phosphate(a-TP)overlayer on nanoparticulate TiO_(2)surfaces,achieved via lysozyme-molded in-situ surface reforming.The a-TP overlayer modulates surface adsorption energies for reaction intermediates,favoring WOR for H_(2)O_(2)production over the competing O_(2)evolution reaction.Our density functional theory calculations reveal that a-TP/TiO_(2)exhibits a substantial energy uphill for the O·*formation pathway,which disfavors O_(2)evolution but promotes H_(2)O_(2)production.Additionally,the a-TP overlayer strengthens the built-in electric field,resulting in favorable kinetics.Consequently,a-TP/TiO_(2)exhibits 3.7-fold higher Faraday efficiency(FE)of 63%at 1.76 V vs.reversible hydrogen electrode(RHE)under 1 sun illumination,compared to bare TiO_(2)(17%),representing the highest FE among TiO_(2)-based WOR H_(2)O_(2)production systems.Employing the a-TP overlayer constitutes a promising strategy for controlling reaction pathways and achieving efficient solar-to-chemical energy conversion. 展开更多
关键词 Solar H_(2)O_(2) production In-situ surface reforming titanyl phosphate Amorphous overlayer Reaction pathway control
下载PDF
Effect of hydrolysis conditions on hydrous TiO_2 polymorphs precipitated from a titanyl sulfate and sulfuric acid solution 被引量:2
2
作者 Hao Song Bin Liang Li Lu Pan Wu Chun Li 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2012年第7期642-650,共9页
The relationship between hydrolysis conditions and hydrous titania polymorphs obtained in a titanyl sulfate and sulfmic acid solu- tion was investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM... The relationship between hydrolysis conditions and hydrous titania polymorphs obtained in a titanyl sulfate and sulfmic acid solu- tion was investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron micros- copy (HRTEM). The results revealed that the feeding rate of the titanyl sulfate stock solution, the concentration of sulfi.Lric acid, and the seed dosage of mtile crystal could significantly affect the hydrolysis rate, thus influencing the titania crystal phase. Hydrous TiO2 in the form of rutile, anatase, or the mixture of both could be obtained in solutions of low titanium concentrations and 2.5wt% to 15wt% sulfuric acid at 100℃. When the hydrolysis rate of titanitma expressed by TiOa was more than or equal to 0.04 g/(L.min), the hydrolysate was almost phase-pure anatase, while the main phase state was rutile when the hydrolysis rate was less than or equal to 0.01 g/(L.min). With the hy- drolysis rate between 0.02 and 0.03 g/(L.min), the hydrolysate contained almost equal magnitude ofrutile and anatase. It seems that although rutile phase is thermodynamically stable in very acidic solutions, anatase is a kinetically stable phase. 展开更多
关键词 titanium dioxide titanyl sulfate sulfuric acid HYDROLYSIS ANATASE RUTILE
下载PDF
Treatment satisfaction after I year high-power potassiumtitanyl-phosphate photoselective vaporization of the prostate 被引量:1
3
作者 Ja Hyeon Ku Min Chul Cho Hyeong Seok Kim Jae-Seung Paick Soo Woong Kim 《Asian Journal of Andrology》 SCIE CAS CSCD 2010年第5期728-734,共7页
To investigate the factors that influence treatment satisfaction after high-power potassium-titanyl-phosphate (KTP) laser vaporization of the prostate, we compared the characteristics between patients who were satis... To investigate the factors that influence treatment satisfaction after high-power potassium-titanyl-phosphate (KTP) laser vaporization of the prostate, we compared the characteristics between patients who were satisfied and those who were not satisfied. In all, 97 patients aged between 53-82 years (median age 67 years) underwent high-power KTP laser vaporization of the prostate for lower urinary tract symptoms due to benign prostatic hyperplasia. At 12 months postoperatively, 60 patients were satisfied with the treatment, whereas 37 were dissatisfied. Although there were no differences in International Prostate Symptom Score (IPSS) values at baseline, the satisfied group scored better in total IPSS at 1, 3, 6, and 12 months postoperatively (P 〈 0.05). At baseline, the maximum flow rate (Qmax) was lower in the dissatisfied group and remained low throughout the follow-up period, with the exception of 1 month postoperatively (P 〈 0.05), compared with the satisfied group. There were no differences in other objective data between the two groups, including post-void residual and the number of voids based on the frequency-volume charts. In a multivariate model, a higher bladder contractility index was associated with a greater likelihood of treatment satisfaction 12 months after high-power KTP laser vaporization (odds ratio 1.024, 95% confidence interval 1.001-1.048, P 〈 0.05). Patients who were not satisfied following the surgery had a smaller improvement in subjective symptoms and Qmax. In addition, our findings suggest that the relative risk of treatment dissatisfaction following high-power KTP laser vaporization was increased in patients with weak detrusor contractility. 展开更多
关键词 benign prostatic hyperplasia potassium-titanyl-phosphate PROSTATE SATISFACTION VAPORIZATION
下载PDF
A novel solution-based self-assembly approach to preparing ultralong titanyl phthalocyanine sub-micron wires
4
作者 朱宗鹏 魏斌 +1 位作者 张建华 王军 《Chinese Physics B》 SCIE EI CAS CSCD 2014年第7期655-660,共6页
Ultralong titanyl phthalocyanine (TiOPc) sub-micron wires have been synthesized by a novel solution-based self- assembly method. By using different solvents, changing the mass concentration and the solvent vapor pre... Ultralong titanyl phthalocyanine (TiOPc) sub-micron wires have been synthesized by a novel solution-based self- assembly method. By using different solvents, changing the mass concentration and the solvent vapor pressure, the length and the shape of the wires can be adjusted. The mixed-phase properties of the TiOPc sub-micron wires were investigated by the ultraviolet-visible (UV-vis) absorption spectrum and X-ray diffraction. Organic transistors based on these wires were studied, which show the typical p-channel characteristics. 展开更多
关键词 titanyl phthalocyanine sub-micron wire TRANSISTOR solution method
下载PDF
Pseudosymmetric Features and Nonlinear Optical Properties of Potassium Titanyl Phosphate Crystals
5
作者 Anastasia P. Gazhulina Mikhail O. Marychev 《Crystal Structure Theory and Applications》 2013年第3期106-119,共14页
A number of publications containing structural data, characteristics of nonlinear optical properties of pure and doped crystals of potassium titanyl phosphate (KTP) family have been reviewed to analyze the structural ... A number of publications containing structural data, characteristics of nonlinear optical properties of pure and doped crystals of potassium titanyl phosphate (KTP) family have been reviewed to analyze the structural and symmetry conditionality of nonlinear optical properties of these crystals. The pseudosymmetric features of KTP-type crystals with respect to inversion are investigated. Specifically, pseudoinversion distribution maps are calculated;pseudoinversion extrema and coordinates of pseudoinversion centres are found;and the distributions of pure and doped KTP-type structures and their individual atomic sublattices over the degree of pseudoinversion are analyzed. A correlation between the characteristics of nonlinear optical properties of a number of crystals belonging to the KTP family and the degree of pseudoinversion of their atomic structures is demonstrated. 展开更多
关键词 POTASSIUM titanyl PHOSPHATE FAMILY Pseudosymmetry NONLINEAR Optical Properties
下载PDF
乙酸氧钛催化酯化缩聚法合成聚丁二酸乙二醇酯及其性能研究
6
作者 李振超 魏东 +4 位作者 苗庆 王明亮 魏忠 王自庆 宋晓玲 《低碳化学与化工》 CAS 北大核心 2024年第2期60-66,共7页
聚丁二酸乙二醇酯(PES)作为一种脂肪族聚酯,具有良好的力学性能和全生物降解特性,在降解塑料领域具有广阔的应用前景。以溶剂热法制备了一种乙酸氧钛化合物,将其作为催化剂用于催化丁二酸(SA)和乙二醇(EG)酯化缩聚合成高分子量PES。系... 聚丁二酸乙二醇酯(PES)作为一种脂肪族聚酯,具有良好的力学性能和全生物降解特性,在降解塑料领域具有广阔的应用前景。以溶剂热法制备了一种乙酸氧钛化合物,将其作为催化剂用于催化丁二酸(SA)和乙二醇(EG)酯化缩聚合成高分子量PES。系统考察了催化剂用量(催化剂占反应物料的质量分数,下同)、反应温度和反应时间对PES分子量的影响,采用^(1)H-NMR和^(13)C-NMR对PES的结构进行了表征,并对其热性能、热稳定性和力学性能进行了测试。结果表明,当催化剂用量为0.6%,在230℃下聚合8 h时,合成的PES的特性黏度[η]为0.78,数均分子量(Mn)为47500,对应的聚合物分散性指数(PDI)为2.66。合成的PES熔点为102.4℃,最大热分解温度为420.2℃,断裂伸长率为505%±5%,拉伸应力为(48.3±0.6)MPa,拉伸弹性模量高达358.8 MPa。以煤制乙二醇为单体合成PES不但可以实现全生物降解聚合物的低成本制备,而且对煤化工产业的高质量发展有重要的现实意义。 展开更多
关键词 乙酸氧钛 煤化工 全生物降解聚合物 乙二醇 聚丁二酸乙二醇酯
下载PDF
Structure-property relationship of potassium titanyl (KTP)isomorphous substituted crystal
7
作者 Kecong Zhang Hong Zhang 《Chinese Science Bulletin》 SCIE EI CAS 1998年第7期529-536,共8页
KTiOPO-4(KTP) crystal is a nonlinear optical material with superior properties. The KTP structure, point group mm2, is typified by the chemical form {K++}〔Ti 4+〕O(P 5+)O-4, where the curly brackets indicate nine or ... KTiOPO-4(KTP) crystal is a nonlinear optical material with superior properties. The KTP structure, point group mm2, is typified by the chemical form {K++}〔Ti 4+〕O(P 5+)O-4, where the curly brackets indicate nine or eightfold coordination, the square brackets sixfold octahedral coordination and the parentheses fourfold tetrahedral coordination. Different isovalent and aliovalent substitutions in a given structure is quite interesting. The KTP-type structure is extremely accommodating with respect to partial or complete isomorphous substitution which may be especially significant in optical devices such as waveguides. A monographic review of the structure-property relationship of KTP isomorphous substitution is briefly and precisely presented. It is shown that the properties of KTP are very sensitive to its structure. Among the composition, structure and properties of KTP-type crystal, the structure is the core because it is a link between the composition and properties. 展开更多
关键词 POTASSIUM titanyl PHOSPHATE (KTP) CRYSTAL structure and property isomorphous substitution.
全文增补中
预还原对含杂硫酸氧钛溶液水热水解除铁影响
8
作者 彭秋桂 杨帆 +1 位作者 吕仁亮 向兰 《无机盐工业》 CAS CSCD 北大核心 2023年第12期95-101,共7页
探究了向含镁、铝、铁杂质的硫酸氧钛溶液中加入铝粉,以此来改变部分元素价态的预还原处理方法对钛液水热水解除铁过程的影响。以电极电势理论为指导,将钛液中全部Fe(Ⅲ)还原为Fe(Ⅱ)、少量Ti(Ⅳ)还原为Ti(Ⅲ),随后在120℃下水热反应4 ... 探究了向含镁、铝、铁杂质的硫酸氧钛溶液中加入铝粉,以此来改变部分元素价态的预还原处理方法对钛液水热水解除铁过程的影响。以电极电势理论为指导,将钛液中全部Fe(Ⅲ)还原为Fe(Ⅱ)、少量Ti(Ⅳ)还原为Ti(Ⅲ),随后在120℃下水热反应4 h。预还原及未预还原样品的钛水解率分别为98.59%和97.47%,水解产物中的铁含量分别为115 mg/kg和11710 mg/kg(以TiO_(2)计)。结合各反应在110~150℃下的热力学平衡常数与相关平衡方程,利用牛顿-拉弗森迭代法求解得到平衡体系在不同温度下的各组分浓度,阐明了预还原前后溶液中Mg、Al及Fe杂质在水热水解过程中的变化规律。实验与热力学相互印证,揭示了预还原对含杂硫酸氧钛溶液水热水解除铁过程的强化机制。 展开更多
关键词 预还原 硫酸氧钛 水热水解 除铁 水解率
下载PDF
钛酸丁酯与乙酐的反应和产物钛氧有机化合物结构分析 被引量:9
9
作者 陈小泉 古国榜 刘焕彬 《化学学报》 SCIE CAS CSCD 北大核心 2003年第10期1592-1596,共5页
钛酸丁酯与乙酐在环己烷中混合加热反应 ,钛酸丁酯中的烷氧基容易发生二取代反应 ,生成溶于有机溶剂的丁氧基乙酸钛 [Ti(OC4H9) 2 (OOCCH3) 2 ]和乙酸丁酯 ;在过量的乙酐存在下 ,二取代产物形成两种不同结构的钛氧有机物 ,乙酸氧钛[TiO(... 钛酸丁酯与乙酐在环己烷中混合加热反应 ,钛酸丁酯中的烷氧基容易发生二取代反应 ,生成溶于有机溶剂的丁氧基乙酸钛 [Ti(OC4H9) 2 (OOCCH3) 2 ]和乙酸丁酯 ;在过量的乙酐存在下 ,二取代产物形成两种不同结构的钛氧有机物 ,乙酸氧钛[TiO(OOCCH3) 2 ]和丁氧基乙酸氧钛 [Ti2 O(OC4H9) 2 (OOCCH3) 4 ] ,两种物质分子中都存在Ti—O—Ti键型的结构 ,它们不溶于有机溶剂 .Ti2 O(OC4H9) 2 (OOCCH3) 4 展开更多
关键词 钛酸丁酯 乙酐 反应 产物 钛氧有机化合物 结构 环己烷 混合加热反应
下载PDF
用硫酸氧钛制备纳米二氧化钛的研究进展 被引量:8
10
作者 李宗任 陈小泉 +2 位作者 刘焕彬 吴绘敏 刘红峰 《涂料工业》 CAS CSCD 北大核心 2009年第2期64-67,共4页
介绍了利用硫酸氧钛(TiOSO4)制备纳米二氧化钛的主要方法,即沉淀法、溶胶-凝胶法、水热法、机械化学方法等。通过对国内外生产现状和特点的比较,介绍了以硫酸氧钛为原料制备纳米二氧化钛的工艺路线,并对工艺方案以及存在的问题进行了分析。
关键词 硫酸氧钛 纳米二氧化钛 制备方法
下载PDF
以钛氧有机物为前驱物制备具有高光催化活性的纳米二氧化钛晶体 被引量:19
11
作者 陈小泉 古国榜 《催化学报》 SCIE EI CAS CSCD 北大核心 2002年第4期312-316,共5页
纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性 .将 2 0ml钛酸丁酯及 30ml乙酐在密闭容器中与 5 0ml环己烷混合 ,在 70~ 85℃反应 30min ,生成微细的非晶钛氧有机物 ;经FT IR和TGA分析 ,该物质被确认为计量式是TiO(OOCCH3 ) 2... 纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性 .将 2 0ml钛酸丁酯及 30ml乙酐在密闭容器中与 5 0ml环己烷混合 ,在 70~ 85℃反应 30min ,生成微细的非晶钛氧有机物 ;经FT IR和TGA分析 ,该物质被确认为计量式是TiO(OOCCH3 ) 2 和TiO(OC4 H9) (OOCCH3 )的混合体 .该钛氧有机物前驱物经焙烧后得到具有高光催化活性的纳米二氧化钛晶体 .表征结果表明 ,钛氧有机物在焙烧过程中 ,其表面的吸附物及键合有机基团在 40 0℃以前发生脱附和氧化分解 ;在 389~40 5℃间形成锐钛矿型晶体 ,在 6 0 0℃出现金红石晶型 ;6 0 0℃焙烧 3h所得样品的比表面积为 86m2 /g ,其二次粒子呈 2 0 0~30 0nm条形体 ,孔隙大于 2 0nm ;单分散粒子为球形单晶 ,粒径为 2 2nm ;表面物理吸附水量为 1 2 1%,加热至 80 0℃时失重1 4 8%,粉体稳定纯净 .光催化实验结果表明 ,以钛氧有机物为前驱物制备的纳米二氧化钛晶体具有高的光催化活性 ,光降解丁基罗丹明溶液的反应速率常数约为溶胶 凝胶法制备的催化剂样品的 4倍 .表面氧空缺和一定量的表面羟基可能是粉体具有高光催化活性的重要因素 . 展开更多
关键词 二氧化钛 纳米晶体 钛氧有机物 丁基罗丹明 光催化降解 光催化剂 钛酸丁酯 乙酐 前驱物 制备 光催化活性
下载PDF
经尿道大功率绿激光汽化术与等离子前列腺电切术治疗良性前列腺增生症的比较 被引量:14
12
作者 钱君海 沈志久 +3 位作者 程跃 方海伟 胡嘉盛 杨斌斌 《中国微创外科杂志》 CSCD 2013年第10期893-895,898,共4页
目的探讨经尿道大功率磷酸钛氧钾晶体激光(绿激光)治疗良性前列腺增生症(benign prostatic hyperplasia,BPH)的有效性和安全性。方法2010年4月~2012年1月将180例良性前列腺增生症按手术方式分为PVP组与TUPKRP组,每组各90例。比较... 目的探讨经尿道大功率磷酸钛氧钾晶体激光(绿激光)治疗良性前列腺增生症(benign prostatic hyperplasia,BPH)的有效性和安全性。方法2010年4月~2012年1月将180例良性前列腺增生症按手术方式分为PVP组与TUPKRP组,每组各90例。比较2组手术时间、术中出血量、术后冲洗时间、术后导尿管留置时间、术后并发症发生率、拔管后24hQmax、术后3个月IPSS、QOL、Qmax等指标。结果PVP组手术时间(65±25)min,显著长于TUPKRP组(45±15)min(t=6.479,P=0.000);PVP组术中出血量(103±36)ml,显著少于TUPKRP组(304±75)ml(t=-22.605,P=0.000)。PVP组留置导尿时间(16.2±8.2)h,显著短于TUPKRP组(144.3±7.8)h(t=106.513,P=0.000);PVP组术后4例发生需要处理的膀胱痉挛,显著少于TUPKRP组12例[4.6%(4/87)VS.13.3%(12/90),x^2=4.106,P=0.043];PVP组术后并发症发生率5.7%(5/87),显著低于TUPKRP组23.3%(21/90)(x^2=10.918,P=0.001)。PVP组拔管24h后Qmax(17.5±2.3)ml/s,TUPKRP组(17.9±2.5)ml,2组无显著性差异(t=-1.107,P=0.270)。术后3个月PVP组IPSS(10.8±4.8)分,与TUPKRP组(11.4±5.9)分无显著性差异(t=-0.731,P=0.466);PVP组QOL评分(2.0±0.6)分,与TUPKRP组(2.1±0.5)分无显著性差异(t=-1.189,P=0.236);PVP组Qmax(15.8±4.2)ml/s,与TUPKRP组(16.5±3.8)ml无显著性差异(t=-1.147,P=0.253)。结论PVP能达到与TUPKRP相同的治疗效果,但比TUPKRP并发症少,留置导尿管时间短。 展开更多
关键词 良性前列腺增生症 经尿道前列腺切除术 磷酸钛氧钾晶体激光
下载PDF
介孔二氧化钛的非有机模板剂法合成 被引量:8
13
作者 沈俊 田从学 张昭 《催化学报》 SCIE EI CAS CSCD 北大核心 2006年第11期949-951,共3页
采用硫酸钛水解法在不使用有机模板剂的条件下合成了高热稳定的锐钛矿型介孔TiO2.以工业硫酸钛溶液为原料,经两步水解得到介孔结构的偏钛酸,500℃下焙烧后得到比表面积为202·2m2/g、平均孔径为2·8nm并具有超强酸特性的介孔Ti... 采用硫酸钛水解法在不使用有机模板剂的条件下合成了高热稳定的锐钛矿型介孔TiO2.以工业硫酸钛溶液为原料,经两步水解得到介孔结构的偏钛酸,500℃下焙烧后得到比表面积为202·2m2/g、平均孔径为2·8nm并具有超强酸特性的介孔TiO2.使用X射线衍射、N2吸附、扫描电镜、X射线能谱和红外光谱对该样品进行了表征,初步讨论了介孔的形成机理.吸附在偏钛酸孔壁上的硫酸分子和孔壁上的自由羟基键合,起到了孔结构的导向作用及支撑作用. 展开更多
关键词 介孔二氧化钛 硫酸氧钛 热稳定性 模板剂 超强酸
下载PDF
乙酸氧钛对碳酸二甲酯与苯酚酯交换的催化作用 被引量:4
14
作者 唐荣芝 王松林 +2 位作者 张元卓 陈彤 王公应 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2014年第11期2418-2424,共7页
采用溶剂热法合成了乙酸氧钛,其对碳酸二甲酯(DMC)与苯酚的酯交换合成碳酸二苯酯(DPC)的催化反应显示出了很好的催化效果.乙酸氧钛用量0.10 g时,苯酚转化率即达到47.8%,酯交换选择性在99.9%以上,仅检测到微量副产物苯甲醚.傅里叶变换红... 采用溶剂热法合成了乙酸氧钛,其对碳酸二甲酯(DMC)与苯酚的酯交换合成碳酸二苯酯(DPC)的催化反应显示出了很好的催化效果.乙酸氧钛用量0.10 g时,苯酚转化率即达到47.8%,酯交换选择性在99.9%以上,仅检测到微量副产物苯甲醚.傅里叶变换红外光谱(FTIR)和固体核磁共振(13C NMR)等表征结果显示,乙酸氧钛在反应过程中首先与苯酚反应,苯氧基取代乙酸根生成苯氧基钛合物.实验结果表明,苯氧基钛合物作为实际催化剂参与DMC和苯酚的酯交换反应,并且重复使用效果良好. 展开更多
关键词 乙酸氧钛 碳酸二苯酯 苯酚 酯交换 多相催化剂 苯氧基钛合物
下载PDF
碱法钛白粉生产工艺中硫酸钛溶液的制备和水解 被引量:11
15
作者 杨轩 薛天艳 +1 位作者 王丽娜 齐涛 《湿法冶金》 CAS 北大核心 2010年第4期277-281,共5页
研究了碱法钛白粉清洁生产工艺中硫酸钛溶液的制备及水解。硫酸钛溶液制备过程中,通过试验及MATLAB拟合,确定了硫酸质量分数、原料用量与硫酸钛溶液质量浓度及酸度系数(F值)间的函数关系;水解过程中,考察了水解温度、酸度系数(F值)、硫... 研究了碱法钛白粉清洁生产工艺中硫酸钛溶液的制备及水解。硫酸钛溶液制备过程中,通过试验及MATLAB拟合,确定了硫酸质量分数、原料用量与硫酸钛溶液质量浓度及酸度系数(F值)间的函数关系;水解过程中,考察了水解温度、酸度系数(F值)、硫酸钛质量浓度对水解的影响。在优化水解条件下,钛水解率达90%以上,制得的偏钛酸在高温下煅烧可得到金红石型和锐钛矿型二氧化钛。 展开更多
关键词 硫酸钛 偏钛酸 水解 钛白粉
下载PDF
常压水解法制备纳米二氧化钛及表征 被引量:6
16
作者 赵燕禹 李勇 +2 位作者 商连弟 王惠惠 元应仙 《无机盐工业》 CAS 北大核心 2010年第6期42-43,46,共3页
以硫酸法工业生产钛白粉的中间产物硫酸氧钛及工业尿素为原料,采用常压水解法,研究了制备纳米二氧化钛粉体的最佳工艺条件。详细考察了纳米二氧化钛制备工艺过程中的主要影响因素,即硫酸氧钛质量浓度、尿素质量浓度、硫酸氧钛与尿素物... 以硫酸法工业生产钛白粉的中间产物硫酸氧钛及工业尿素为原料,采用常压水解法,研究了制备纳米二氧化钛粉体的最佳工艺条件。详细考察了纳米二氧化钛制备工艺过程中的主要影响因素,即硫酸氧钛质量浓度、尿素质量浓度、硫酸氧钛与尿素物质的量比等。根据实验工艺参数,得出纳米二氧化钛的最佳制备方案:硫酸氧钛与尿素物质的量比为1∶2,硫酸氧钛质量浓度为40 g/L,尿素质量浓度为50 g/L;在反应体系中添加适量表面活性剂,反应温度为85℃±5℃,在高速搅拌下反应2 h,始终保持pH为2;反应完成后,产物用去离子水洗涤,再用无水乙醇洗涤1次;滤饼在85℃干燥2~3 h,最后在700℃焙烧2 h,即得到纳米二氧化钛产品。制备的纳米二氧化钛超细粉晶相为锐钛型,粒径为7~13 nm。 展开更多
关键词 常压水解法 纳米二氧化钛 硫酸氧钛 尿素
下载PDF
由TiOSO_4水解-沉淀制备TiO_2薄膜 被引量:21
17
作者 徐明霞 徐廷献 刘宁 《硅酸盐学报》 EI CAS CSCD 北大核心 1997年第2期209-213,共5页
通过控制TiOSO4的水解沉淀反应条件,可控制基片上膜层粒子大小及其附着力。适量尿素加入可加快均匀成膜速度。根据SEM断面观察与重量法相比较,表征了膜厚。适当反应条件下,反应1h,干燥煅烧制得的膜厚为0.2μm以上;... 通过控制TiOSO4的水解沉淀反应条件,可控制基片上膜层粒子大小及其附着力。适量尿素加入可加快均匀成膜速度。根据SEM断面观察与重量法相比较,表征了膜厚。适当反应条件下,反应1h,干燥煅烧制得的膜厚为0.2μm以上;四次重复反应煅烧,获得的膜厚达0.8μm以上。600~1000℃煅烧0.5h的薄膜为锐钛矿金红石晶相。膜层结构均匀、较致密,附着力及耐酸碱性均较好。 展开更多
关键词 硫酸氧钛 水解 沉淀 二氧化钛薄膜
下载PDF
乳状液膜法制备BaTiO_3细粉 被引量:4
18
作者 王向德 赵晓明 +2 位作者 万印华 朱斌 张秀娟 《水处理技术》 CAS CSCD 1998年第3期137-143,共7页
本文提出了一个先用液膜法在内水相直接制备中间体BaTiO(C2O4)2共沉淀物然后焙烧成BaTiO3的新方法。设计的液膜体系是TiO2+和H2C2O4在内水相,Ba2+在外水相,P507为载体。着重研究了内水相起始p... 本文提出了一个先用液膜法在内水相直接制备中间体BaTiO(C2O4)2共沉淀物然后焙烧成BaTiO3的新方法。设计的液膜体系是TiO2+和H2C2O4在内水相,Ba2+在外水相,P507为载体。着重研究了内水相起始pH与载体浓度对Ba2+迁移的影响和内水相最终pH与所得共沉淀物的钛钡比的关系。最后经X射线衍射分析证明了制得的共沉淀物是钛钡比为1的草酸氧钛钡BaTiO(C2O4)2,其800℃焙烧物是钛钡比为1的偏钛酸钡。 展开更多
关键词 乳状液膜 制备 偏钛酸钡 钛酸钡 细粉
下载PDF
工业生产纳米二氧化钛存在的问题与解决方案 被引量:25
19
作者 魏绍东 王杏 《现代化工》 EI CAS CSCD 北大核心 2005年第8期50-52,共3页
纳米二氧化钛的生产原料有钛醇盐、四氯化钛和硫酸法钛白生产过程中的中间产物硫酸氧钛。笔者以硫酸氧钛为原料,开发出制备纳米二氧化钛的工艺:采用均匀沉淀法生产工艺、多孔陶瓷膜分离技术及旋流动态煅烧炉与旋转闪蒸干燥器组合煅烧法... 纳米二氧化钛的生产原料有钛醇盐、四氯化钛和硫酸法钛白生产过程中的中间产物硫酸氧钛。笔者以硫酸氧钛为原料,开发出制备纳米二氧化钛的工艺:采用均匀沉淀法生产工艺、多孔陶瓷膜分离技术及旋流动态煅烧炉与旋转闪蒸干燥器组合煅烧法生产及精制二氧化钛,并将该工艺成功地应用于中国科学院纳米技术工程中心有限公司15t/a纳米TiO2中试装置和500t/a纳米TiO2溶胶装置中,对工业生产中存在的问题及解决方法进行了介绍。 展开更多
关键词 纳米二氧化钛 硫酸氧钛 均匀沉淀法 工业化生产
下载PDF
中红外砷酸钛氧钾光参变振荡器的实验研究 被引量:4
20
作者 王滨 任刚 +4 位作者 李彤 牛瑞华 于淑范 钟鸣 吕百达 《激光技术》 CAS CSCD 北大核心 2007年第3期225-227,共3页
为了得到高能量中红外激光输出,对电光调Q灯抽运1064nm Nd∶YAG抽运复合腔砷酸钛氧钾(KTA)光学参变振荡器(OPO)作了实验研究,在工作频率1Hz时得到OPO输出单脉冲能量36mJ,信号光脉宽10ns,闲频光波长3407nm,能量11mJ。在5Hz^40Hz范围单脉... 为了得到高能量中红外激光输出,对电光调Q灯抽运1064nm Nd∶YAG抽运复合腔砷酸钛氧钾(KTA)光学参变振荡器(OPO)作了实验研究,在工作频率1Hz时得到OPO输出单脉冲能量36mJ,信号光脉宽10ns,闲频光波长3407nm,能量11mJ。在5Hz^40Hz范围单脉冲能量随重复频率增高而降低。实验中采用的复合腔抽运技术有利于提高转换效率,降低起振阈值。使用上述光源对中红外成像器件作实验,在成像系统监视器上观察到激光光斑。这一结果对中红外激光器的研究是有帮助的。 展开更多
关键词 非线性光学 光参变振荡器 复合腔 砷酸钛氧钾 中红外激光
下载PDF
上一页 1 2 7 下一页 到第
使用帮助 返回顶部