Simulation and experiment analysis on thermal deformation of tool system in single-point diamond turning of aluminum alloy

The aim of this work is to simulate thermal deformation of tool system and investigate the influence of cutting parameters on it in single-point diamond turning(SPDT) of aluminum alloy. The experiments with various cutting parameters were conducted. Cutting temperature was measured by FLIR A315 infrared thermal imager. Tool wear was measured by scanning electron microscope(SEM). The numerical model of heat flux considering tool wear generated in cutting zone was established. Then two-step finite element method(FEM) simulations matching the experimental conditions were carried out to simulate the thermal deformation. In addition, the tests of deformation of tool system were performed to verify previous simulation results. And then the influence of cutting parameters on thermal deformation was investigated. The results show that the temperature and thermal deformation from simulations agree well with the results from experiments in the same conditions. The maximum thermal deformation of tool reaches to 7 μm. The average flank wear width and cutting speed are the dominant factors affecting thermal deformation, and the effective way to decrease the thermal deformation of tool is to control the tool wear and the cutting speed.

FEATURE SOLID MODELING TOOL SYSTEM:FSMTS

In conformity with the principle of Design for Manufacture,feature-based design strate- (?)es have been developed.As the“feature”is relevant to the“macro process plan”and“macro NC programs”,obviously,“feature”is beyond the power of conventional solid modellers.Neverthe- less,substantial breakthrough has not been made in the solid modeling field,except“feature at- taching”or“feature recognizing”methods have been taken on.In this paper,the theory, concepts,system architecture,and algorithm principles of solid modeling tool system have been represented.The practice of Feature Solid Modeling Tool System (FSMTS) developed at Huazhong University has proved that the tool may be a new foundation of Feature-Based Design.

APPROACH TO DISPATCHING FMS TOOL SYSTEM

Dispatching optimally FMS tool system can utilize efficiently FMS automated tool provide system and raise flexibility of FMS. Some dispatch problems to be solved on FMS tool system are put forward. The models discussed of FMS tool system are given, and the mathematic describes are made on the models. The concept of operation tool change set is posed, and a optimal objective function is recommended. The algorithm of operation tool change set is studied and given.The developed successfully tool management system proves the algorithm is effective.

A Systematic Review and Performance Evaluation of Open-Source Tools for Smart Contract Vulnerability Detection

With the rise of blockchain technology,the security issues of smart contracts have become increasingly critical.Despite the availability of numerous smart contract vulnerability detection tools,many face challenges such as slow updates,usability issues,and limited installation methods.These challenges hinder the adoption and practicality of these tools.This paper examines smart contract vulnerability detection tools from 2016 to 2023,sourced from the Web of Science(WOS)and Google Scholar.By systematically collecting,screening,and synthesizing relevant research,38 open-source tools that provide installation methods were selected for further investigation.From a developer’s perspective,this paper offers a comprehensive survey of these 38 open-source tools,discussing their operating principles,installation methods,environmental dependencies,update frequencies,and installation challenges.Based on this,we propose an Ethereum smart contract vulnerability detection framework.This framework enables developers to easily utilize various detection tools and accurately analyze contract security issues.To validate the framework’s stability,over 1700 h of testing were conducted.Additionally,a comprehensive performance test was performed on the mainstream detection tools integrated within the framework,assessing their hardware requirements and vulnerability detection coverage.Experimental results indicate that the Slither tool demonstrates satisfactory performance in terms of system resource consumption and vulnerability detection coverage.This study represents the first performance evaluation of testing tools in this domain,providing significant reference value.

Exploration of University English Teachers’Acceptance and Willingness to Use Learning Management System Data Analysis Tools

This study investigates university English teachers’acceptance and willingness to use learning management system(LMS)data analysis tools in their teaching practices.The research employs a mixed-method approach,combining quantitative surveys and qualitative interviews to understand teachers’perceptions and attitudes,and the factors influencing their adoption of LMS data analysis tools.The findings reveal that perceived usefulness,perceived ease of use,technical literacy,organizational support,and data privacy concerns significantly impact teachers’willingness to use these tools.Based on these insights,the study offers practical recommendations for educational institutions to enhance the effective adoption of LMS data analysis tools in English language teaching.

基于Ladybug Tools对日光温室的方位角与光照模拟

日光温室是重要的农业基础设施,温室的方位角是评判温室结构设计是否合理的基础之一。选择较好的温室方位角拥有更优的采光性能是本文研究的意义。为此,选择三维可视化技术模拟分析日光温室的光照值,为更好地研究分析日光温室采光性能及光照变化提供较为直观的途径和方法,为优化设计高产、高效、节能的日光温室提供一定的辅助作用。通过实测数据和模拟数据的对比,说明Ladybug Tools软件模拟不同方位角的变化及和田日光温室的光照的对比准确度较高,误差不超过5%,为研究日光温室在光照方面的设计提供了一定的理论依据和参考。

Novel Batch Polishing Method of Ceramic Cutting Inserts for Reducing Tool Wear

Ceramic cutting inserts are a type of cutting tool commonly used in high-speed metal cutting applications.However,the wear of these inserts caused by friction between the workpiece and cutting inserts limits their overall effectiveness.In order to improve the tool life and reduce wear,this study introduces an emerging method called magnetic field-assisted batch polishing(MABP)for simultaneously polishing multiple ceramic cutting inserts.Several polishing experiments were conducted under different conditions,and the wear characteristics were clarified by cutting S136H steel.The results showed that after 15 min of polishing,the surface roughness at the flank face,edge,and nose of the inserts was reduced to below 2.5 nm,6.25 nm,and 45.8 nm,respectively.Furthermore,the nose radii of the inserts did not change significantly,and there were no significant changes in the weight percentage of elements before and after polishing.Additionally,the tool life of the batch polished inserts was found to be up to 1.75 times longer than that of unpolished inserts.These findings suggest that the MABP method is an effective way to mass polish ceramic cutting inserts,resulting in significantly reduced tool wear.Furthermore,this novel method offers new possibilities for polishing other tools.

Digital Twin Modeling Enabled Machine Tool Intelligence:A Review

Machine tools,often referred to as the“mother machines”of the manufacturing industry,are crucial in developing smart manufacturing and are increasingly becoming more intelligent.Digital twin technology can promote machine tool intelligence and has attracted considerable research interest.However,there is a lack of clear and systematic analyses on how the digital twin technology enables machine tool intelligence.Herein,digital twin modeling was identified as an enabling technology for machine tool intelligence based on a comparative study of the characteristics of machine tool intelligence and digital twin.The review then delves into state-of-the-art digital twin modelingenabled machine tool intelligence,examining it from the aspects of data-based modeling and mechanism-data dual-driven modeling.Additionally,it highlights three bottleneck issues facing the field.Considering these problems,the architecture of a digital twin machine tool(DTMT)is proposed,and three key technologies are expounded in detail:Data perception and fusion technology,mechanism-data-knowledge hybrid-driven digital twin modeling and virtual-real synchronization technology,and dynamic optimization and collaborative control technology for multilevel parameters.Finally,future research directions for the DTMT are discussed.This work can provide a foundation basis for the research and implementation of digital-twin modeling-enabled machine tool intelligence,making it significant for developing intelligent machine tools.

Nutritional Assessment Tools for Patients with Cancer:A Narrative Review

Cancer patients are at high risk of malnutrition,which can lead to adverse health outcomes such as prolonged hospitalization,increased complications,and increased mortality.Accurate and timely nutritional assessment plays a critical role in effectively managing malnutrition in these patients.However,while many tools exist to assess malnutrition,there is no universally accepted standard.Although different tools have their own strengths and limitations,there is a lack of narrative reviews on nutritional assessment tools for cancer patients.To address this knowledge gap,we conducted a non-systematic literature search using PubMed,Embase,Web of Science,and the Cochrane Library from their inception until May 2023.A total of 90 studies met our selection criteria and were included in our narrative review.We evaluated the applications,strengths,and limitations of 4 commonly used nutritional assessment tools for cancer patients:the Subjective Global Assessment(SGA),Patient-Generated Subjective Global Assessment(PG-SGA),Mini Nutritional Assessment(MNA),and Global Leadership Initiative on Malnutrition(GLIM).Our findings revealed that malnutrition was associated with adverse health outcomes.Each of these 4 tools has its applications,strengths,and limitations.Our findings provide medical staff with a foundation for choosing the optimal tool to rapidly and accurately assess malnutrition in cancer patients.It is essential for medical staff to be familiar with these common tools to ensure effective nutritional management of cancer patients.

基于IT Tools平台的高中信息技术深度学习实践研究

It Tools平台是一个建立在网络上的信息技术教学辅助平台,教师和学生都可以通过这一平台进行学习,当前这一平台在教育教学中已经取得一定应用效果。本次阐述了基于It Tools平台的高中信息技术教学,以“编程计算”单元教学为例分析了基于It Tools平台的高中信息技术深度学习实践策略。

Geometric Error Identification of Gantry-Type CNC Machine Tool Based on Multi-Station Synchronization Laser Tracers

Laser tracers are a three-dimensional coordinate measurement system that are widely used in industrial measurement.We propose a geometric error identification method based on multi-station synchronization laser tracers to enable the rapid and high-precision measurement of geometric errors for gantry-type computer numerical control(CNC)machine tools.This method also improves on the existing measurement efficiency issues in the single-base station measurement method and multi-base station time-sharing measurement method.We consider a three-axis gantry-type CNC machine tool,and the geometric error mathematical model is derived and established based on the combination of screw theory and a topological analysis of the machine kinematic chain.The four-station laser tracers position and measurement points are realized based on the multi-point positioning principle.A self-calibration algorithm is proposed for the coordinate calibration process of a laser tracer using the Levenberg-Marquardt nonlinear least squares method,and the geometric error is solved using Taylor’s first-order linearization iteration.The experimental results show that the geometric error calculated based on this modeling method is comparable to the results from the Etalon laser tracer.For a volume of 800 mm×1000 mm×350 mm,the maximum differences of the linear,angular,and spatial position errors were 2.0μm,2.7μrad,and 12.0μm,respectively,which verifies the accuracy of the proposed algorithm.This research proposes a modeling method for the precise measurement of errors in machine tools,and the applied nature of this study also makes it relevant both to researchers and those in the industrial sector.

On dry machining of AZ31B magnesium alloy using textured cutting tool inserts

Magnesium alloys have many advantages as lightweight materials for engineering applications,especially in the fields of automotive and aerospace.They undergo extensive cutting or machining while making products out of them.Dry cutting,a sustainable machining method,causes more friction and adhesion at the tool-chip interface.One of the promising solutions to this problem is cutting tool surface texturing,which can reduce tool wear and friction in dry cutting and improve machining performance.This paper aims to investigate the impact of dimple textures(made on the flank face of cutting inserts)on tool wear and chip morphology in the dry machining of AZ31B magnesium alloy.The results show that the cutting speed was the most significant factor affecting tool flank wear,followed by feed rate and cutting depth.The tool wear mechanism was examined using scanning electron microscope(SEM)images and energy dispersive X-ray spectroscopy(EDS)analysis reports,which showed that at low cutting speed,the main wear mechanism was abrasion,while at high speed,it was adhesion.The chips are discontinuous at low cutting speeds,while continuous at high cutting speeds.The dimple textured flank face cutting tools facilitate the dry machining of AZ31B magnesium alloy and contribute to ecological benefits.

A review on the multi-scaled structures and mechanical/thermal properties of tool steels fabricated by laser powder bed fusion additive manufacturing

The laser powder bed fusion(LPBF) process can integrally form geometrically complex and high-performance metallic parts that have attracted much interest,especially in the molds industry.The appearance of the LPBF makes it possible to design and produce complex conformal cooling channel systems in molds.Thus,LPBF-processed tool steels have attracted more and more attention.The complex thermal history in the LPBF process makes the microstructural characteristics and properties different from those of conventional manufactured tool steels.This paper provides an overview of LPBF-processed tool steels by describing the physical phenomena,the microstructural characteristics,and the mechanical/thermal properties,including tensile properties,wear resistance,and thermal properties.The microstructural characteristics are presented through a multiscale perspective,ranging from densification,meso-structure,microstructure,substructure in grains,to nanoprecipitates.Finally,a summary of tool steels and their challenges and outlooks are introduced.

Systematic evaluation of maternal and infant health literacy assessment tools based on COSMIN guidelines

Background:To systematically evaluate the measurement performance of the maternal and child health literacy scale and the study’s methodological quality and to provide a reference for selecting and developing related health outcome measurement tools.Methods:Databases such as CNKI,PubMed,and Embase were searched,and the search time frame was established until January 2023.The literature was independently screened by two researchers.The methodological quality and measurement performance of the included scales were evaluated using the health measurement tool selection criteria,and the evaluation results were summarized and analyzed using descriptive analysis.Results:A total of six papers were included,covering six specific scales,with significant differences in the methodological quality and measurement performance of their development studies,none of which evaluated hypothesis testing,the validity of scales,cross-cultural validity,measurement error,or responsiveness.Conclusion:The methodological quality and scale measurement performance of the maternal health literacy inventory in pregnancy,the women’s reproductive health literacy in pregnancy questionnaire,and the maternal and infant health literacy scale development studies are relatively high,but the number of studies on maternal and infant health literacy specific scales is relatively insufficient,and more studies should be conducted in the future.

A Single Feasibility Study of System Multi-feature Analysis and Evaluation Tool Based on AADL Model

The tool for analyzing and evaluating system characteristics based on the AADL model can achieve real-time,reliability,security,and schedulability analysis and evaluation for software-intensive systems.It provides a complete solution for quality analysis of real-time,reliability,safety,and schedulability in the design and demonstration stages of software-intensive systems.By using the system′s multi-characteristic(real-time capability,reliability,safety,schedulability)analysis and evaluation tool based on AADL models,it can meet the software non-functional requirements stipulated by the existing model development standards and specifications.This effectively enhances the efficiency of demonstrating the compliance of the system′s non-functional quality attributes in the design work of our unit′s software-intensive system.It can also improve the performance of our unit′s software-intensive system in engineering inspections and requirement reviews conducted by various organizations.The improvement in the quality level of software-intensive systems can enhance the market competitiveness of our unit′s electronic products.

Phosphorylated protein chip combined with artificial intelligence tools for precise drug screening

We have developed a protein array system,named"Phospho-Totum",which reproduces the phosphorylation state of a sample on the array.The protein array contains 1471 proteins from 273 known signaling pathways.According to the activation degrees of tyrosine kinases in the sample,the corresponding groups of substrate proteins on the array are phosphorylated under the same conditions.In addition to measuring the phosphorylation levels of the 1471 substrates,we have developed and performed the artificial intelligence-assisted tools to further characterize the phosphorylation state and estimate pathway activation,tyrosine kinase activation,and a list of kinase inhibitors that produce phosphorylation states similar to that of the sample.The Phospho-Totum system,which seamlessly links and interrogates the measurements and analyses,has the potential to not only elucidate pathophysiological mechanisms in diseases by reproducing the phosphorylation state of samples,but also be useful for drug discovery,particularly for screening targeted kinases for potential drug kinase inhibitors.

Tool Wear State Recognition with Deep Transfer Learning Based on Spindle Vibration for Milling Process

The wear of metal cutting tools will progressively rise as the cutting time goes on. Wearing heavily on the toolwill generate significant noise and vibration, negatively impacting the accuracy of the forming and the surfaceintegrity of the workpiece. Hence, during the cutting process, it is imperative to continually monitor the tool wearstate andpromptly replace anyheavilyworn tools toguarantee thequality of the cutting.The conventional tool wearmonitoring models, which are based on machine learning, are specifically built for the intended cutting conditions.However, these models require retraining when the cutting conditions undergo any changes. This method has noapplication value if the cutting conditions frequently change. This manuscript proposes a method for monitoringtool wear basedonunsuperviseddeep transfer learning. Due to the similarity of the tool wear process under varyingworking conditions, a tool wear recognitionmodel that can adapt to both current and previous working conditionshas been developed by utilizing cutting monitoring data from history. To extract and classify cutting vibrationsignals, the unsupervised deep transfer learning network comprises a one-dimensional (1D) convolutional neuralnetwork (CNN) with a multi-layer perceptron (MLP). To achieve distribution alignment of deep features throughthe maximum mean discrepancy algorithm, a domain adaptive layer is embedded in the penultimate layer of thenetwork. A platformformonitoring tool wear during endmilling has been constructed. The proposedmethod wasverified through the execution of a full life test of end milling under multiple working conditions with a Cr12MoVsteel workpiece. Our experiments demonstrate that the transfer learning model maintains a classification accuracyof over 80%. In comparisonwith the most advanced tool wearmonitoring methods, the presentedmodel guaranteessuperior performance in the target domains.

Selection of media tools for community planning:A study from the perspective of communicative planning

In community planning,due to the lack of evidence regarding the selection of media tools,this study examines how a common but differentiated ideal speech situation can be created as well as how more appropriate media tools can be defined and selected in the community planning process.First,this study describes the concept and theoretical basis of media used in community planning from the perspectives of the multiple effects of media evolution on communicative planning.Second,the classification criteria and typical characteristics of media tools used to support community planning are clarified from three dimensions:acceptability,cost effectiveness,and applicability.Third,strategies for applying media tools in the four phases of communicative planning-namely,state analysis,problem identification,contradictory solution and optimization-are described.Finally,trends in the development of media tools for community planning are explored in terms of multistakeholder engagement,supporting scientific decision-making and multiple-type media integration.The results provide a reference for developing more inclusive,effective,and appropriate media tools for enhancing decision-making capacity and modernizing governance in community planning and policy-making processes.

Deterministic tools to predict gas assisted gravity drainage recovery factor

Naturally fractured rocks contain most of the world's petroleum reserves.This significant amount of oil can be recovered efficiently by gas assisted gravity drainage(GAGD).Although,GAGD is known as one of the most effective recovery methods in reservoir engineering,the lack of available simulation and mathematical models is considerable in these kinds of reservoirs.The main goal of this study is to provide efficient and accurate methods for predicting the GAGD recovery factor using data driven techniques.The proposed models are developed to relate GAGD recovery factor to the various parameters including model height,matrix porosity and permeability,fracture porosity and permeability,dip angle,viscosity and density of wet and non-wet phases,injection rate,and production time.In this investigation,by considering the effective parameters on GAGD recovery factor,three different efficient,smart,and fast models including artificial neural network(ANN),least square support vector machine(LSSVM),and multi-gene genetic programming(MGGP)are developed and compared in both fractured and homogenous porous media.Buckinghamπtheorem is also used to generate dimensionless numbers to reduce the number of input and output parameters.The efficiency of the proposed models is examined through statistical analysis of R-squared,RMSE,MSE,ARE,and AARE.Moreover,the performance of the generated MGGP correlation is compared to the traditional models.Results demonstrate that the ANN model predicts the GAGD recovery factor more accurately than the LSSVM and MGGP models.The maximum R^(2)of 0.9677 and minimum RMSE of 0.0520 values are obtained by the ANN model.Although the MGGP model has the lowest performance among the other used models(the R2 of 0.896 and the RMSE of 0.0846),the proposed MGGP correlation can predict the GAGD recovery factor in fractured and homogenous reservoirs with high accuracy and reliability compared to the traditional models.Results reveal that the employed models can easily predict GAGD recovery factor without requiring complicate governing equations or running complex and time-consuming simulation models.The approach of this research work improves our understanding about the most significant parameters on GAGD recovery and helps to optimize the stages of the process,and make appropriate economic decisions.

Emerging molecules,tools,technology,and future of surgical knife in gastroenterology

The 21^(st) century has started with several innovations in the medical sciences,with wide applications in health care management.This development has taken in the field of medicines(newer drugs/molecules),various tools and technology which has completely changed the patient management including abdominal surgery.Surgery for abdominal diseases has moved from maximally invasive to minimally invasive(laparoscopic and robotic)surgery.Some of the newer medicines have its impact on need for surgical intervention.This article focuses on the development of these emerging molecules,tools,and technology and their impact on present surgical form and its future effects on the surgical intervention in gastroenterological diseases.