Imaging simulation and analysis of attitude jitter effect on topographic mapping for lunar orbiter stereo optical cameras

The geometric accuracy of topographic mapping with high-resolution remote sensing images is inevita-bly affected by the orbiter attitude jitter.Therefore,it is necessary to conduct preliminary research on the stereo mapping camera equipped on lunar orbiter before launching.In this work,an imaging simulation method consid-ering the attitude jitter is presented.The impact analysis of different attitude jitter on terrain undulation is conduct-ed by simulating jitter at three attitude angles,respectively.The proposed simulation method is based on the rigor-ous sensor model,using the lunar digital elevation model(DEM)and orthoimage as reference data.The orbit and attitude of the lunar stereo mapping camera are simulated while considering the attitude jitter.Two-dimensional simulated stereo images are generated according to the position and attitude of the orbiter in a given orbit.Experi-mental analyses were conducted by the DEM with the simulated stereo image.The simulation imaging results demonstrate that the proposed method can ensure imaging efficiency without losing the accuracy of topographic mapping.The effect of attitude jitter on the stereo mapping accuracy of the simulated images was analyzed through a DEM comparison.

Topographic seismic effects and avalanche hazard:A case study of Mount Siella(L’Aquila,Central Italy)

In mountainous areas,snow avalanches could be triggered by the shaking produced by earthquakes.The forces induced by the earthquake can cause an irregular increase of shear strength load down the slope,for the presence of complex surface and buried morphologies.Topographic irregularities generate maximum effects of waves amplification linked to wavelengths comparable to the horizontal dimension of the topographic feature.For this reason,the selected time-histories represent an appropriate input for the two-dimensional numerical response analyses when a dynamic phenomenon produce the resonant motion of a whole mountain.This represents an important earthquake-induced hazard in snow-covered mountain areas with high probability of seismic events.Some valleys are located in regions with scare ground motion data and investments on infrastructures are not always accompanied by adequate protection against earthquake-induced avalanches.The paper points out a simple deterministic approach for selecting a set of real accelerograms applied to a real case of Siella Mountain(Central Italy)where a large avalanche destroying a tourist facility of Rigopiano resort on 18 January 2017.The selected time histories were used as input for the two-dimensional numerical model of the subsoil to evaluate the topographic seismic amplification in ridge and compare it with the results of other authors.These methods suggest that morphology-related inertial effects should be considered as an overload action on snow layers when controlling multi-hazard studies and spatial planning.

Finer topographic data improves distribution modeling of Picea crassifolia in the northern Qilian Mountains

The Qilian Mountains, a national key ecological function zone in Western China, play a pivotal role in ecosystem services. However, the distribution of its dominant tree species, Picea crassifolia (Qinghai spruce), has decreased dramatically in the past decades due to climate change and human activity, which may have influenced its ecological functions. To restore its ecological functions, reasonable reforestation is the key measure. Many previous efforts have predicted the potential distribution of Picea crassifolia, which provides guidance on regional reforestation policy. However, all of them were performed at low spatial resolution, thus ignoring the natural characteristics of the patchy distribution of Picea crassifolia. Here, we modeled the distribution of Picea crassifolia with species distribution models at high spatial resolutions. For many models, the area under the receiver operating characteristic curve (AUC) is larger than 0.9, suggesting their excellent precision. The AUC of models at 30 m is higher than that of models at 90 m, and the current potential distribution of Picea crassifolia is more closely aligned with its actual distribution at 30 m, demonstrating that finer data resolution improves model performance. Besides, for models at 90 m resolution, annual precipitation (Bio12) played the paramount influence on the distribution of Picea crassifolia, while the aspect became the most important one at 30 m, indicating the crucial role of finer topographic data in modeling species with patchy distribution. The current distribution of Picea crassifolia was concentrated in the northern and central parts of the study area, and this pattern will be maintained under future scenarios, although some habitat loss in the central parts and gain in the eastern regions is expected owing to increasing temperatures and precipitation. Our findings can guide protective and restoration strategies for the Qilian Mountains, which would benefit regional ecological balance.

3D and 2D topographic correction to estimated geothermal gradient from the base of gas hydrate stability zone in the Andaman Forearc Basin

Methane gas hydrate related bottom-simulating reflectors(BSRs)are imaged based on the in-line and cross-line multi-channel seismic(MCS)data from the Andaman Forearc Basin.The depth of the BSR depends on pressure and temperature and pore water salinity.With these assumptions,the BSR depth can be used to estimate the geothermal gradient(GTG)based on the availability of in-situ temperature measurements.This calculation is done assuming a 1D conductive model based on available in-situ temperature measurement at site NGHP-01-17 in the study area.However,in the presence of seafloor topography,the conductive temperature field in the subsurface is affected by lateral refraction of heat,which focuses heat in topographic lows and away from topographic highs.The 1D estimate of GTG in the Andaman Forearc Basin has been validated by drilling results from the NGHP-01 expedition.2D analytic modeling to estimate the effects of topography is performed earlier along selected seismic profiles in the study area.The study extended to estimate the effect of topography in 3D using a numerical model.The corrected GTG data allow us to determine GTG values free of topographic effect.The difference between the estimated GTG and values corrected for the 3D topographic effect varies up to~5℃/km.These conclude that the topographic correction is relatively small compared to other uncertainties in the 1D model and that apparent GTG determined with the 1D model captures the major features,although the correction is needed prior to interpreting subtle features of the derived GTG maps.

An aerial ammunition ad hoc network collaborative localization algorithm based on relative ranging and velocity measurement in a highly-dynamic topographic structure

In the internet of battlefield things, ammunition is becoming networked and intelligent, which depends on location information. Therefore, this paper focuses on the self-organized network collaborative localization of munitions with an aerial three-dimensional(3D) highly-dynamic topographic structure under a satellite denied environment. As for aerial networked munitions, the measurement of munitions is objectively incomplete due to the degenerated and interrupted link of munitions. For this reason, a cluster-oriented collaborative localization method is put forward in this paper. Multidimensional scaling(MDS) was first integrated with a trilateration localization method(TLM) to construct a relative localization algorithm for determining the relative location of a mobile cluster network. The information related to relative velocity was then combined into a collaborative localization framework to devise a TLM-vMDS algorithm. Finally, an iterative refinement algorithm based on scaling by majorizing a complicated function(SMACOF) was employed to effectively eliminate the influence of incomplete link observation on localization accuracy. Compared with the currently available advanced algorithms, the proposed TLM-vMDS algorithm achieves higher localization accuracy and faster convergence for a cluster of extensively networked munitions, and also offers better numerical stability and robustness for highspeed motion models.

Spatial distributions of intra-community tree species under topographically variable conditions

Growing public awareness of the importance of protecting biodiversity requires the development of forest practices that increase the complexity of stand structure.Understanding the ecological processes of different forest vegetation provide insights into community coexistence mechanisms.In this paper,the spatial patterns of three different communities,evergreen broadleaf forest,deciduous broadleaf forest,and mixed needleleaf and broadleaf forest at Mt.Huangshan,China,were quantified with four structural parameters,the mingling index,the uniform angle index,the diameter dominance index and the crowdedness index.All trees with a diameter at breast height of more than 5 cm were measured.Our analyses highlighted that most trees in the three communities were extremely dense and slightly clumped,with a moderate size differentiation and high mixed structure.In mixed needleleaf and broadleaf forest,the distribution pattern of tree species was better than the other two forests.Overall,spatial patterns in mixed needleleaf and broadleaf forest exhibited a strong stability-effect,that is,the stand had a suitable environment for the stable survival of the forest.With the increasing of elevation,the degree of the mingling index and the crowdedness index increased,however,there was no influence on the uniform angle index and the diameter dominance index.Further,at the same elevation,four structural parameters of shady slope were larger than that of sunny slope.Then we found the relationship between stand spatial structure and environment factors had important influence on forest structure.Our work contributes to the knowledge of population structure,and further provide theoretical basis for the sustainable development of forest resources and protecting biodiversity of Huangshan Mountain.In future studies,it is necessary to explore the limiting factors of community spatial distribution by combining species diversity and functional traits.

Analyzing geomorphological and topographical controls for the heterogeneous glacier mass balance in the Sikkim Himalayas

Glacier response patterns at the catchment scale are highly heterogeneous and defined by a complex interplay of various dynamics and surface factors.Previous studies have explained heterogeneous responses in qualitative ways but quantitative assessment is lacking yet where an intrazone homogeneous climate assumption can be valid.Hence,in the current study,the reason for heterogeneous mass balance has been explained in quantitative methods using a multiple linear regression model in the Sikkim Himalayan region.At first,the topographical parameters are selected from previously published studies,then the most significant topographical and geomorphological parameters are selected with backward stepwise subset selection methods.Finally,the contributions of selected parameters are calculated by least square methods.The results show that,the magnitude of mass balance lies between-0.003±0.24 to-1.029±0.24 m.w.e.a^(-1) between 2000 and 2020 in the Sikkim Himalaya region.Also,the study shows that,out of the terminus type of the glacier,glacier area,debris cover,ice-mixed debris,slope,aspect,mean elevation,and snout elevation of the glaciers,only the terminus type and mean elevation of the glacier are significantly altering the glacier mass balance in the Sikkim Himalayan region.Mathematically,the mass loss is approximately 0.40 m.w.e.a^(-1) higher in the lake-terminating glaciers compared to the land-terminating glaciers in the same elevation zone.On the other hand,a thousand meters mean elevation drop is associated with 0.179 m.w.e.a-1of mass loss despite the terminus type of the glaciers.In the current study,the model using the terminus type of the glaciers and the mean elevation of the glaciers explains 76% of fluctuation of mass balance in the Sikkim Himalayan region.

Evaluation of Different Topographic Parameters Extracted from the Digital Elevation Measurements with the Use of Geostatistical Interpolation Methods

Gradient slope, aspect slope, profiling and contourlines are important topographic parameters that can be derived from digital elevation data obtained from different sources with exploitation of different interpolation techniques. Geostatistical interpolation methods such as ordinary kriging models constitute reliable alternatives to deterministic approaches in creation of continuous surface models from discrete elevation data. This research aimed at extraction, analysis, and evaluation of different terrain parameters elevation measurements with the use of different ordinary kriging models including the linear model, the circular model, the spherical model, the exponential models, and the Gaussian model. Different ordinary kriging models under ESRI ArcView 3.3 package along with its 3D analyst and Spatial analysis extensions have been exploited in extraction of gradient slope maps, aspect slope maps, and hillshade maps in addition to contourline maps from a sample of elevation data. Visual analysis of the gradient slope maps shows great similarities between the slope maps from the linear, circular, spherical, and exponential OK models, however, that from OK Gaussian models look very different as different sizes and arrangements of the colour patches, referring to different tones and different textures where smooth tones and smooth textures dominate the gradient slope map from the OK Gaussian model. Thus, gradient slope degradation and smoothing are considerably high in the gradient slope map from Gaussian model compared to the slope maps from the other four OK models. Also, the mean slope in the Gaussian model records the lowest value with the lowest value of the standard deviation of slopes in the same map reflecting less structured and highly smoothed gradient slope map compared to the slope maps from the other OK models. Thus, similar sizes of the colour patches and similar tones and similar texture dominate the different aspect slope maps. This is not the case in Figure 2(e) which depicts the aspect slope map extracted with the use of the Gaussian OK model where the smooth colour patches, smooth tones and smooth textures can be observed. Also, the Aspect map, hillshade map and the contourline map from Gaussian OK model are visually and statistically different from their corresponding maps created with the other four OK models. Finally, analysis of extracted two groups of profiles shows that the profiles extracted with the use of linear, circular, spherical, and exponential OK models run close and show highly corrugated and varied terrain. This is different from the profiles with the use of the Gaussian model which are less corrugated and tend to smooth and approximate different parts of the terrains.

Information Collection of Land Use Status Based on Large Scale Topographic Map

With large scale topographic map charted in accordance with Topographic Map Symbols of 1:500 1:1 000 1:2 000(GB/T 20257.1-2007) as the base map of land survey,the land use status information was collected from the map based on the standard in Present Status Classification of Land Utilization(GB/T 21010-2007).The study discussed in details the information of some land types including water system,residential sites,facilities,transportation,pipeline,vegetation,soils and so on,and pointed out problems on extracting land use status information from large scale topographic map.In order to share resources and save social costs,it suggested unifying the standard to classify land types and define all kinds of land types by quantitative values.

Dynamics Characteristics and Topographic Profile Shaping Process of Feiyan Shoal at the Yellow River Delta

Feiyan Shoal is a sub Yellow River Delta, which was formed from Jan. 1964 to May 1976, when the Yellow River entered sea via Diaokou Channel. Since the terminal reach shifted to Qingshuigou channel in 1976, Feiyan Shoal has been experiencing severe erosion and retreat. This paper explains the evolutionary characteristics of the typical profile of Feiyan Shoal from the perspective of dynamical force and sediments＇ characteristics. All this is on the basis of the data of topographic profiles observed since the 1970s and the samples of hydrology and sediments collected in situ in Apr. 2004, the analysis of the retreating distance, and the tidal and wave friction velocity distribution. Feiyan Shoal topographical profile has experienced a course of ＂fast erosion and retrogression - slow eroding modulation - fluctuate triggering change＂ in recent 30 years, which is also the gradual disappearing process of the delta front. The different intensity of sediment erosion resistance is the main reason for the erosion speed changes. Due to the hydrodynamic force changes, the water depth range of maximum retreating distance and between erosion and progradation became shallow. It indicates that the storm tide will still be the triggering force of seashore topographic profile evolutions in the future.

Vegetation structural characteristics and topographic factors in the remnant moist Afromontane forest of Wondo Genet, south central Ethiopia

For forest ecosystem management to be effective, knowledge of the horizontal and vertical structural diversity of a forest is essential. The moist Afromontane highlands of Wondo Genet in south-central Ethiopia present an opportunity to restore and rehabilitate and enhance the ecosystem services to be obtained from this forest sustainably. We focused on the forest structural characteristics to better understand the current forest conditions to assist in the sustainable management of this resource. A total of 75 （20 m × 20 m） quadrats were sampled and diame- ter at breast height （DBH） 〉2 cm and stem height 〉2 m were measured. Species identity and abundance, elevation, slope, and aspect were recorded for each plot. Structural characteristics were computed for each plot. Relationship of topographic factors with vegetation characteristics was conducted using R-Software. A total of 72 woody species was re- corded. Whereas, the overall diameter distribution shows an inverted J-shaped curve, the basal area followed a bell-shaped pattern. Five types of population structures are revealed. The mean tree density and basal area was 397.3 stems.ha-1 and 31.4 m2.ha-1, respectively. Only 2.8% of the tree species have densities of 〉25 stems.ha^-1 and the percentage dis- tribution of trees show 56.2% in the DBH class 2-10 cm, indicating that the forest is dominated by medium-sized trees. Celtis africana （8.81 m2.ha^-1） and Pouteria adolfi-friederieii （5.13 m2.ha^-1） make the highest contribution to the basal area and species importance value index. The families/species with the highest importance value index are Ulmaceae, Fabacea and Sapotaceae. Species abundance （r2 = 0.32, p 〈0.001） and species richness （P =0.50, p 〈0.001） are positively related with tree density. Tree density is negatively related with elevation （~ = -0.36, p 〈0.001）, slope （r2 =-0.15, p 〈0.001） and aspect （r2 = -0.07, p 〈0.05）. While basal area is negatively related with elevation （r2 =-0.14, p 〈0.001）, it has a positive relationship with tree density （r2 =0.28, p 〈0.001 and species richness （r2 =0.098）. Species with poor population structure should be assisted by restoration tasks and further anthropogenic distur- bance such as illegal logging and fuel wood extraction should be re- stricted.

Spatial distribution pattern of Picea schrenkiana population in the Middle Tianshan Mountains and the relationship with topographic attributes

The spatial distribution of plant populations is an important feature of population structure and it de- termines the population＇s ecological preferences, biological characteristics and relationships with environmental factors. The point pattern analysis method was adopted to study the distribution pattern of Picea schrenkiana indi- viduals of different size classes and the correlations between two size classes as well as the impact of topog- raphical attributes on the population distribution. With increasing diameter at breast height, the plant density of the P. schrenkiana population showed a declining trend. Old trees showed a random distribution at a small spatial scale （0-12 m）, whereas saplings, small trees and big trees all had an aggregated distribution at all scales. With the increase of tree age, the scales at which maximal aggregation occurred gradually increased and the aggregation strength decreased. At a small scale （0-16 m）, all size classes showed a negative correlation and the larger the difference between tree size, the more significant the negative correlation. The number of medium, big and old trees had a significantly positive correlation with elevations, whereas the number of saplings and small trees was not significantly correlated with elevations. The numbers of saplings, small and medium trees showed a significant positive correlation with slope gradient, whereas the number of big trees was not significantly correlated, and the number of old trees was negatively correlated with gradient. With the exception of old trees, saplings, small, me- dium and big trees showed negative correlations with convexity index. The study provides a theoretical basis for the conservation, rehabilitation and sustainable management of forest ecosystems in the Tianshan Mountains.

Study on topographic compensation model of the Okinawa Trough I. Calculation of theoretical isostatic response function

Based on regional compensation and experimental isostasy, the calculating formula of theoretical isostatic response function is deduced when the loads on top correlate with loads from below. A variety of curves of theoretical isostatic response function were calculated with different effective elastic thickness of the plate and by using different proportions between loads on top and loads from below. And preliminary discussion is made on shapes of the curves.

Study on topographic compensation model of the Okinawa Trough Ⅱ. Geological interpretation of isostatic response function of the Okinawa Trough

Based on regional compensation model and experimental isostasy, the isostatic response function of the Okinawa Trough is calculated by using gravity and topographic data. The results are shown as follows: the effective elastic thickness of the plate and compensation depth in the southern Okinawa Trough is obviously greater than those in the middle Okinawa Trough. In reference with other geological and geophysical data, the differences between the two portions are explained to be caused mainly by their differences in temperature of the lithosphere and the compensation mechanism.

On the role of topographic ampli fi cation in seismic slope instabilities

Surface wave generation due to body wave propagation near ground surface has been discussed in the literature.This phenomenon,typically occurring in topographic changing areas,along with its interaction with body waves(SV),decreases precision of formulas for evaluation of slope displacement.This signi fi cant fact caused the researchers not only to investigate the combined surface and SV waves motion pattern,but also to consider its effect on structures built on the slopes.In order to reveal the phenomenon,several fi nite element numerical studies have been performed by ABAQUS programme.Besides,two physical model slopes simulating the landslide occurrence have been constructed and tested by shaking table device.The results of induced and calculated accelerations obtained by two approaches have been compared and Rayleigh wave generation has been proved.Furthermore,the slope displacements have been calculated by various empirical methods and the results were compared with numerical ones.The results proved that in order to increase the precision of empirical formulas for displacement prediction,surface wave effect should be taken into account.Finally,a concept of'effective depth of sur fi cial ampli fi cation'is introduced and its effect on dynamic slope stability is analysed.

Relationship between settlements and topographical factors:An example from Sichuan Province,China

Terrain can influence the spatial distribution of settlements. Studies on the terrain characteristics of settlements can help to understand the effects of the environment on human activities. This paper provides a quantitative analysis of the relationship between settlements and topographical factors. A statistically significant sample of residential locations and ASTER GDEM V2 were used to investigate terrain traits and settlements distributions. We selected eight topographical factors and introduced a practical concept, distributive entropy, into assessing the aggregation extent of the settlements' spatial distribution. The study showed that topography varies within the study area, and distributive entropy indicates that settlements have distinctive distribution tendency in statistic approach. According to the results of this study, mountain inhabitants prefer to settle in valleys. Additionally, with distributive entropy, residential suitability was divided to three levels: suitable, normal, and unsuited. The results showed that suitable area is small in Sichuan Province, accounting for 8.2%～29.9%; however, unsuited area is large, accounting for 33%～63.3%.

Formation mechanism of propagated sensation along the meridians,as verified by cortical somatosensory-evoked potential topographic maps

The peripheral driver stimulating theory states that as a driver passes along a certain meridian during acupuncture; the driver provokes nerve sense devices along the meridian, resulting in the nerve impulse entering the central nervous system. Accordingly, volunteers have reported propagated sensations along the meridians （PSM）. The present study was designed to utilize a cortical somatosensory-evoked potential （CSEP） topographic map for determining whether stimulation expansion occurs in somatosensory area I when sensation was provoked in individuals with obvious PSM. The sensation was blocked by mechanical compression, and the sensation was imitated in individuals without PSM. Results revealed a red, high-potential signal in the representative area of the lower limbs in individuals with obvious PSM symptoms when the Gall Bladder Meridian （GBM） sensation passed to the head and face. This representative area was near the middle line of the CSEP topographic map, and a red, high-potential signal, which jumps over the representative area of the upper limbs, also appeared in the representative face area, which was at the external region of the CSEP topographic map. However, in individuals exhibiting no PSM, only a red high-potential signal appeared in the representative lower limb area. When Hegu （LI 4） was stimulated in individuals without PSM, an obvious evoked response appeared only in the representative upper limb area. However, when Hegu was stimulated in individuals exhibiting PSM, the response area was larger in the representative upper limb area and extended to the representative face area. When Guangrning （GB 37） was stimulated in PSM individuals, the face representation response disappeared and was confined to a foot representation of the somatosensory area I when PSM was blocked by mechanical pressure. Results suggested that mechanical compression blocked PSM, and corresponding changes were exhibited in the CSEP topographic map. These results provide compelling evidence for the hypothesis that peripheral driver stimulation is the key element in producing PSM.

Relationships between Landslide Types and Topographic Attributes in a Loess Catchment,China

Topographic attributes have been identified as the most important factor in controlling the initiation and distribution of shallow landslides triggered by rainfall.As a result,these landslides influence the evolution of local surface topography.In this research,an area of 2.6 km 2 loess catchment in the Huachi County was selected as the study area locating in the Chinese Loess Plateau.The landslides inventory and landslide types were mapped using global position system(GPS) and field mapping.The landslide inventory shows that these shallow landslides involve different movement types including slide,creep and fall.Meanwhile,main topographic attributes were generated based on a high resolution digital terrain model(5 m × 5 m),including aspect,slope shape,elevation,slope angle and contributing area.These maps were overlaid with the spatial distributions of total landslides and each type of landslides in a geographic information system(GIS),respectively,to assess their spatial frequency distributions and relative failure potentials related to these selected topographic attributes.The spatial analysis results revealed that there is a close relation between the topographic attributes of the postlandsliding local surface and the types of landslide movement.Meanwhile,the types of landslide movement have some obvious differences in local topographic attributes,which can influence the relative failure potential of different types of landslides.These results have practical significance to mitigate natural hazard and understandgeomorphologic process in thick loess area.

Topographic Characteristics for the Geomorphologic Zones in the Northwestern Edge of the Qinghai-Tibet Plateau

Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined according to the topographic profile maps for the ridge and piedmont lines, and then the topographic gradient characteristics are analyzed according to the representative topographic profile acquisition method.Based on the geomorphologic database data, the regions between the ridge and the piedmont lines are divided into four geomorphologic zones; and the topographic characteristics are finally analyzed for the different geomorphologic zones regions using the DEM data. The research results show that from the piedmont to the ridge, there exist four geomorphologic zones: arid, fluvial, periglacial and glacial. The arid has the lowest elevation, topographic gradient, relief and slope characteristics. The fluvial has lower elevation and the highest topographic gradient, but with lower relief and slope characteristics. With higher elevation, the periglcial has lower topographic gradient, but the highest relief and slope characteristics. The glacial has the highest elevation with higher topographic gradient, relief and slope characteristics.

Review on the study of topographic effect on seismic ground motion

Topographic effect study is a very important research topic in seismology, seismic engineering,earthquake engineering, engineering earthquake construction and engineering seismology. This paper focuses on its present development status. Post-earthquake investigation has found that the existence of topography caused more serious earthquake damage. The actual seismographs also recorded the topographic amplification effect of 6 to 7 times and even more than 10 times. Numerical simulation is an important technique to study topographic effect, which complements the lack of observed records. However researches on 3-D topographic effect are not enough and need to be studied deeper. To find the main influence factors and the quantitative relationship between topography and ground motion are required very urgently. Obviously the achievements not only can be applied in the earthquake resistant design, but also can provide the quantitative pre-earthquake disaster prediction and quantitative post-earthquake disaster evaluation.