In order to solve internal logistics problems of iron and steel works,such as low transportation efficiency of vehicles and high transportation cost,the production process and traditional transportation style of iron ...In order to solve internal logistics problems of iron and steel works,such as low transportation efficiency of vehicles and high transportation cost,the production process and traditional transportation style of iron and steel works were introduced.The internal transport tasks of iron and steel works were grouped based on cluster analysis according to demand time of the transportation.An improved vehicle scheduling model of semi-trailer swap transport among loading nodes and unloading nodes in one task group was set up.The algorithm was designed to solve the vehicle routing problem with simultaneous pick-up and delivery(VRPSPD) problem based on semi-trailer swap transport.A solving program was written by MATLAB software and the method to figure out the optimal path of each grouping was obtained.The dropping and pulling transportation plan of the tractor was designed.And an example of semi-trailer swap transport in iron and steel works was given.The results indicate that semi-trailer swap transport can decrease the numbers of vehicles and drivers by 54.5% and 88.6% respectively compared with decentralized scheduling in iron and steel works,and the total distance traveled reduces by 43.5%.The semi-trailer swap transport can help the iron and steel works develop the production in intension.展开更多
On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in nor...On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.展开更多
In this paper, towing tank experiments are conducted to study the behavior of flow on a model of the underwater vehicle with various shapes of bows, i.e. tango and standard bows in free surface motion tests. The total...In this paper, towing tank experiments are conducted to study the behavior of flow on a model of the underwater vehicle with various shapes of bows, i.e. tango and standard bows in free surface motion tests. The total resistances for different Froude numbers are considered experimentally. The towing tank is equipped with a trolley that can operate in through 0.05-6 m/s speed with ±0.02 m/s accuracy. Furthermore, the study is done on hydrodynamic coefficients i.e. total, residual and friction resistance coefficients, and the results are compared. Finally, the study on flow of wave fields around bows is done and wave filed around two bows are compared. The Froude number interval is between 0.099 and 0.349. Blockage fraction for the model is fixed to 0.005 3. The results showed that the residual resistance of the standard bow in 0.19 to 0.3 Froude number is more than the tango bow in surface motion which causes more total resistance for the submarine. Finally, details of wave generated by the bow are depicted and the effects of flow pattern on resistance drag are discussed.展开更多
A series of experimental studies of the innovative propulsor named Collective and Cyclic Pitch Propeller(CCPP) applied to an underwater vehicle were designed and performed at the Australian Maritime College, Universit...A series of experimental studies of the innovative propulsor named Collective and Cyclic Pitch Propeller(CCPP) applied to an underwater vehicle were designed and performed at the Australian Maritime College, University of Tasmania. The bollard pull and captive model tests were conducted to investigate the characteristics of CCPP and to examine the effect of different parameter settings to its performance. The results show that the CCPP is able to generate effective manoeuvring forces in various operational condition. In addition, the obtained results in the form of force coefficients provide a useful empirical model for the simulation and control of an underwater vehicle equipped with this propulsor.展开更多
提出了一种新型的水下拖曳系统三维水动力数学模型。在该模型中拖曳缆绳的控制方程由Ablow andSchechter模型给出,Gertler and Hargen的水下运载体六自由度运动方程被用来描述拖曳体的水动力状态。通过对拖曳缆绳和拖曳体的控制方程在...提出了一种新型的水下拖曳系统三维水动力数学模型。在该模型中拖曳缆绳的控制方程由Ablow andSchechter模型给出,Gertler and Hargen的水下运载体六自由度运动方程被用来描述拖曳体的水动力状态。通过对拖曳缆绳和拖曳体的控制方程在连接点处进行边界条件耦合,从而构成整个拖曳系统的水动力数学模型。在研究中,拖曳系统的水动力数学模型通过时间与空间的中心差分方程来逼近,每一时刻拖曳体所受的水动力通过求解Navier-Stokes方程得到。所提出的模型特别适用于拖曳体为非回转体、非流线型的主体,或必须考虑拖曳体各组成部分的水动力相互影响的情况。计算结果与相应的实验室样机试验结果的比较表明,所提出的模型可以有效地预报拖曳系统的水动力特性。利用所提出的水动力模型,对华南理工大学提出的自主稳定可控制水下拖曳体在实际海况下的数值模拟结果显示,所分析的拖曳体具有良好的运动与姿态稳定性,是一种值得开发研究的新型水下拖曳体。展开更多
基金Project(70671108) supported by the National Natural Science Foundation of China
文摘In order to solve internal logistics problems of iron and steel works,such as low transportation efficiency of vehicles and high transportation cost,the production process and traditional transportation style of iron and steel works were introduced.The internal transport tasks of iron and steel works were grouped based on cluster analysis according to demand time of the transportation.An improved vehicle scheduling model of semi-trailer swap transport among loading nodes and unloading nodes in one task group was set up.The algorithm was designed to solve the vehicle routing problem with simultaneous pick-up and delivery(VRPSPD) problem based on semi-trailer swap transport.A solving program was written by MATLAB software and the method to figure out the optimal path of each grouping was obtained.The dropping and pulling transportation plan of the tractor was designed.And an example of semi-trailer swap transport in iron and steel works was given.The results indicate that semi-trailer swap transport can decrease the numbers of vehicles and drivers by 54.5% and 88.6% respectively compared with decentralized scheduling in iron and steel works,and the total distance traveled reduces by 43.5%.The semi-trailer swap transport can help the iron and steel works develop the production in intension.
基金supported by the National Key Research and Development Program of China(No.2016YFC0208005)the Open Research Program of State Key Laboratory of Engine Combustion(No.K2018-11).
文摘On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.
文摘In this paper, towing tank experiments are conducted to study the behavior of flow on a model of the underwater vehicle with various shapes of bows, i.e. tango and standard bows in free surface motion tests. The total resistances for different Froude numbers are considered experimentally. The towing tank is equipped with a trolley that can operate in through 0.05-6 m/s speed with ±0.02 m/s accuracy. Furthermore, the study is done on hydrodynamic coefficients i.e. total, residual and friction resistance coefficients, and the results are compared. Finally, the study on flow of wave fields around bows is done and wave filed around two bows are compared. The Froude number interval is between 0.099 and 0.349. Blockage fraction for the model is fixed to 0.005 3. The results showed that the residual resistance of the standard bow in 0.19 to 0.3 Froude number is more than the tango bow in surface motion which causes more total resistance for the submarine. Finally, details of wave generated by the bow are depicted and the effects of flow pattern on resistance drag are discussed.
文摘A series of experimental studies of the innovative propulsor named Collective and Cyclic Pitch Propeller(CCPP) applied to an underwater vehicle were designed and performed at the Australian Maritime College, University of Tasmania. The bollard pull and captive model tests were conducted to investigate the characteristics of CCPP and to examine the effect of different parameter settings to its performance. The results show that the CCPP is able to generate effective manoeuvring forces in various operational condition. In addition, the obtained results in the form of force coefficients provide a useful empirical model for the simulation and control of an underwater vehicle equipped with this propulsor.
文摘提出了一种新型的水下拖曳系统三维水动力数学模型。在该模型中拖曳缆绳的控制方程由Ablow andSchechter模型给出,Gertler and Hargen的水下运载体六自由度运动方程被用来描述拖曳体的水动力状态。通过对拖曳缆绳和拖曳体的控制方程在连接点处进行边界条件耦合,从而构成整个拖曳系统的水动力数学模型。在研究中,拖曳系统的水动力数学模型通过时间与空间的中心差分方程来逼近,每一时刻拖曳体所受的水动力通过求解Navier-Stokes方程得到。所提出的模型特别适用于拖曳体为非回转体、非流线型的主体,或必须考虑拖曳体各组成部分的水动力相互影响的情况。计算结果与相应的实验室样机试验结果的比较表明,所提出的模型可以有效地预报拖曳系统的水动力特性。利用所提出的水动力模型,对华南理工大学提出的自主稳定可控制水下拖曳体在实际海况下的数值模拟结果显示,所分析的拖曳体具有良好的运动与姿态稳定性,是一种值得开发研究的新型水下拖曳体。
